Used Bt Lpe200 (Lithium Ion) for sale (6,149)

Year of construction: 2015, condition: good (used), Parts shown by hand not come. Crodpfxsz Atbws Adheh

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Cedpfx Adszd Rmgohsrh Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Pin wrench (28210) Crodpfshhyyxox Adhoh Collet wrench Manufacturer: Fahrion Overall length: 495 mm

Condition: like new (used), Spindle support bearing Manufacturer: Union Overhang: 600 mm Spindle diameter: 130 mm Cedpjdvvtljfx Adhorh

Condition: excellent (used), Prism milling cutter Manufacturer: Franken & Orion 90 degrees Cedodwmnpepfx Adhsrh 8 x 63 mm diameter 4 x approx. 100 mm diameter

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 18,000 rpm, travel distance X-axis: 1,020 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 805 mm, controller manufacturer: FANUC, controller model: 31i-b5, spindle motor power: 22,000 W, table load: 800 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz Csdjzlg Ngjpfx Adhorh • Number of axes: 5 (X, Y, Z, A, C) • Simultaneous 5-axis machining • Absolute feedback system (absolute pulse coder on A- and C-axis) • Table diameter: 800 mm • Maximum workpiece diameter: 1,000 mm • Maximum workpiece height: 630 mm • Spindle motor power: 22 / 18.5 kW • Spindle taper: HSK-A63 • Tool holder type: HSK63A • Flood coolant pump: 2.5 kW / 0.44 MPa / 100 L/min • Through-spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Tool load monitoring • Portable MPG handwheel • Automatic power off • Program storage: 10,240 m (4 MB) • 1,000 program capacity • 400 tool offset pairs • 48 work coordinate systems • Large capacity memory: 2 GB • Data server & memory card: 2 GB • Embedded Ethernet • iHMI easy operating system (EZI & Machining Cycle) • DSQ1 (AICC II – 200 blocks) Additional equipment • Hinged belt chip conveyor (rear side) • Cyclone filter system • Renishaw probe ready (RMI-Q) + software • External power transformer • Electrical line filter • Machine lifting hooks

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 110 mm x-travel: 1985 mm Cjdpfxou Utwbs Adhjrh y-travel: Spindelstock vert. 1270 mm z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 table-size: 1600 x 1400 mm table rotating: 360 ° table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Tailstock Facing slide 700 Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 Crsdpfx Asu Idp Dodhjh B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t with face slide 700mm , electronic hand control *

Condition: new, Year of construction: 2026, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS-UV4060 Max Print head: Epson TX800 Maximum resolution: 2690 dpi Includes software for printer control and image editing Crjdpfx Asfbmgfjdhoh Weight: 90 kg Control display Table movement via screw mechanism 360-degree operation available upon request: for bottles and round objects A2 size (45x65 cm) and a printing height of 20 cm are possible Software settings and printer instructions are available upon request. Available throughout Germany/Europe.

Condition: ready for operation (used), functionality: fully functional, Union table drilling machine BFT 105 Heidenhain TNC 155 Year of manufacture: 1988 Crsdjz Ei Ucopfx Adhsh Table load capacity: approx. 4 tons 24 kW spindle: diameter 105 / SK 50 / S2000 Travel distances: 1750 x 1100 x 800

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW Crjdpfexcg Evox Adhjh weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head Codpofg U Tpsfx Adhjrh - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E61MI17092615103, This is a combination oven/steamer, model CMP 61, from the premium manufacturer Rational, in an electric version, manufactured in 2019 and featuring fully automatic self-cleaning!! The unit has been completely overhauled in our in-house workshop and is fully functional. The combination oven/steamer shows signs of use, see photos. The base pictured is not included in the offer, but can be purchased as an option. You will receive an invoice with VAT shown. Service: We will be happy to help you find a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This unit is the ideal choice if you are looking for a classic combination oven/steamer that you want to operate manually. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The Combi Master® from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the cook through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845 x 850 mm Power connection: 400 V / kW: 11.0 / 50-60 Hz Capacity: 5 x 1/1 GN Weight: approx. 103 kg Serial number: E61MI17092615103 Year of manufacture: 2017 Condition: used, overhauled, fully functional Further details: Possible applications: Steam operation: from 30° C to 130° C Hot air operation: from 30° C to 300° C Combination operation: from 30° C to 300° C Finishing®: bringing prepared and cooled dishes to the optimal serving temperature in the ideal climate Automatic separation of fat for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether sensitive or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-glazed door (swivels for easier cleaning) Core temperature measurement by means of a sensor Cool-Down function High-performance fresh steam generator (automatic rinsing and emptying) Hand spray with retraction function Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m. Codpfxez Dg Svo Adherh Subject to changes and errors. The sale is made exclusively subject to our general terms and conditions.

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Specifications: Capacity: 5,957 L Type of Stainless: 316 Stainless Steel Internal Pressure: 3 bar Internal Temperature: 37°C Jacket Pressure: 6 bar Cedozim A Iepfx Adhsrh Jacket Temperature: 37°C Legs/Lugs/Mounting Ring: Lugs Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 16,418 h, load capacity: 7,000 kg, lifting height: 5,500 mm, free lift: 700 mm, fuel type: diesel, mast type: telescopic, construction height: 3,900 mm, fork carriage width: 1,600 mm, fork length: 1,400 mm, empty load weight: 11,800 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,250 mm, Side loader Load center: 700 ISO class: FEM 4 B Mast type: Telescopic Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 32x12.1-15 (30%) Rear tire size: 2 x 32x12.1-15 (30%) Battery year of manufacture: 2005 Csdpfxjz Ifpbj Adhorh Additional single hydraulic circuit, cabin with heater, dust protection, pivoting fork carriage (hydraulic), table height: 900mm, table width: 1400mm, lighting according to StVZO (German Road Traffic Licensing Regulations), 1 work light at the front.

Condition: used, This listing is for a Polar Refrigeration CDO80 Refrigerator. The unit is in full working condition and is ready for immediate release. Polar Refrigeration CDO80 Refrigerator, a compact and efficient cooling solution. This stainless steel table-top refrigerator is perfect for establishments where space is limited but reliable refrigeration is essential. Key Features: Compact Design: Measuring 85.5(h) x 60(w) x 58.5(d) cm, the CDO80 fits seamlessly under worktops, ensuring easy access to your ingredients while maximizing your kitchen layout. Robust Storage Capacity: With a net capacity of 64 liters and equipped with 2 sturdy adjustable shelves plus 1 half shelf, this refrigerator allows for optimal organization and storage of your culinary essentials. Energy Efficiency: Rated with an energy class of A, the CDO80 features 40mm insulation for reduced energy consumption, translating to lower operating costs and a more eco-friendly kitchen. Technical Specifications: Temperature Range: Maintains a precise cooling environment between +2°C to +5°C, ideal for preserving freshness. Power Supply: Operates on 230V, with a power output of 120W and a daily energy consumption of 1.12 kWh. Weight: Weighs 44 kg, featuring fixed wheels for easy positioning and adjustable feet for stability. Benefits: User-Friendly Controls: The accurate digital temperature control and display ensure that your food items are stored at optimal temperatures, while the simple manual defrost program makes maintenance easy. Enhanced Security: The reversible door comes with a lock, providing added security for your valuable ingredients. Versatile Usage: Designed for medium use in ambient temperatures up to 30°C, making it suitable for various professional kitchen environments. The Polar Refrigeration CDO80 Refrigerator is your ideal companion for efficient food storage in a compact format. Elevate your kitchen's operational efficiency and ensure the freshness of your ingredients with this reliable refrigeration solution today! Cjdpfx Asxx Agbjdherh

Condition: used, This listing is for a Lion Mark II Formaldemeter. The unit is in full working condition and is ready for immediate release. The Lion Formaldemeter MK11 is a specialized instrument designed for measuring formaldehyde concentrations in various environments. This meter is essential for professionals in fields such as environmental monitoring, industrial hygiene, and health and safety compliance. Here are some key features and considerations regarding its use: Key Features: Service and Calibration: The Lion Formaldemeter MK11 can be serviced and calibrated at any general service facility that is equipped to handle PPM Formaldemeters and Glutaraldemeters. This ensures reliable performance and accurate readings over time. Phenol Filters: The device includes the option to fit phenol filters over the sampling nozzle. These filters are crucial for preventing saturation, thereby ensuring accurate and reliable readings. It is recommended to replace these filters approximately every 10 samples to maintain optimal performance. Cross-Sensitivity: Users should be aware that the Formaldemeter may exhibit cross-sensitivity to other volatile aldehydes and alcohols. This characteristic can potentially affect the accuracy of measurements, so it is important to consider the presence of these substances in the environment being tested. Calibration Warning: For accurate calibration, it is critical to avoid using interference gases. Calibration should always be performed under controlled conditions to ensure the integrity of the measurements. Applications: The Lion Formaldemeter MK11 is ideal for a variety of applications, including: Environmental monitoring in workplaces and laboratories Assessing formaldehyde levels in building materials and indoor air quality Cjdpfoxx Aanjx Adherh Compliance testing for health and safety regulations

Condition: excellent (used), 1 used, very well-maintained horizontal boring and milling machine / table drilling machine with point-to-point and contour control HEIDENHAIN TNC 145 and facing head Manufacturer: WMW UNION, Origin Germany Model: BFT 130/7-TNC 145 Year of manufacture: 1984 Technical data: Spindle diameter: 130 mm Spindle shank: SK 50 Table surface: 2000 x 1800 mm Travel: X-axis, transverse 2785 mm Y-axis, vertical 2520 mm Z-axis, longitudinal 2345 mm W-axis, quill 900 mm B-axis, table 360° Table load: 8000 kg Speed range: 5-1000 rpm Facing head speed: 5-2500 rpm Feed force X/Y/Z: 20000/20000/25000 N Feed rate X/Y/Z: 5-2500/5-2500/2-2500 mm/min Rapid traverse X/Y/Z: 5/5/3.15 m/min Total connected power: 100 kVA Total power consumption: 70 kW Footprint L x W x H: approx. 8.40 x 5.9 x 5.5 m Weight: 35,300 kg Accessories / Special features: • Point-to-point and contour control HEIDENHAIN TNC 145 • Spindle Ø 130 mm with SK 50 with motorized tool clamping • Facing head • Feed and rapid traverse • Lateral table supports R + L with hardened guides • Coolant system • Guide rail telescope covers • Swiveling control panel Crodpez Euuzsfx Adhsh • Separate control cabinet and hydraulic unit TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, This listing is for a Thermo Electron Corporation CR 4i Refrigerated Centrifuge Specifications Capacity: Swing-out rotor: (4 x 750 mL) 3000 mL Credpfsxzhhijx Adhsh Fixed angle rotor: (8 x100 mL) 800 mL Maximum load: 3.6 kg Speed range: 500 to 7800 rpm RCF range: 20 to 9900 x g Temperature range: -9°C to 40°C Dimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″) Weight: 106 kg (233 lbs) Electrical: 120V, 60 Hz

Condition: used, This listing is for a Dionex HPLC System Crodpfxoxzhm Sj Adheh Combination includes Dionex AS3500 Dionex GP50 Gradient Pump Dionex ED50 Electrochemical Detector Dionex AD250 Absorbance Detector Dionex LC25 Cromatograph Oven Bottle trays This system has been removed from the lab while in good working condition, it was well serviced and is still in very good condition.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm Csdpewgc I Rjfx Adhorh • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) Credpfx Ajfnlkwedheh The machine is CE certified.

Condition: used, Year of construction: 2016, Cap Conveyor outlet High 1.8m Crsdjz Icu Uepfx Adhjh

Condition: used, Year of construction: 1975, machine/vehicle number: 71879, Hyraulik press 51x Kunstoffplatten Crodpez Ibdnofx Adhsh Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 250x90x130 cm Distance between first plate and spindle approx ca. 90cm

Condition: new, functionality: fully functional, machine/vehicle number: 3488, Year of construction: 2025, load capacity: 1,500 kg, lifting height: 4,280 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,055 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift truck Chassis number: 3488 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Ah: 630Ah Battery type: Lithium-ion Battery year of manufacture: 2024 Battery condition: New Sideshift, 3rd valve, 4th valve, integrated sideshift LED lighting BlueLight front + rear panoramic mirror 3 valves overhead guard 24V 630 AH LI-Ion battery 24V/200A HF charger Cjdpfoy Uppqex Adhjrh