Used Bilz Hss for sale (303)

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Njdpfeutz Uyex Aiyocu Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Control cable for lift axle from the driver's cab Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: like new (used), Year of construction: 2010, functionality: unexamined, overall weight: 3,200 kg, 5-axis rotary table with KUKA servo motors Ncodpfx Aoqy Hnpjiyeu

Condition: new, Year of construction: 2025, Z-MaT UA650, 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD display Dual torque direct drive Travel (X/Y/Z): 800/800/550 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Nodpfowku Evsx Aiyocu Air blast through spindle Spindle air curtain Spindle oil cooler Double arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Max. tool length: 300 mm Max. tool diameter: 75/120 mm Table Table diameter: Ø 630 mm Max. workpiece diameter: 650 mm Max. table load: 850 kg T-slot (width x number x spacing): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120–670 mm A-axis swivel range (tilt): ±120° C-axis rotation: 360° Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoders Standard Equipment End-of-operation light, 3-color status light Electronic handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air pressurized (XYZ) Automatic tool changer Air blow gun Coolant gun Coolant tank Coolant flush system (chip flushing) Full splash guard Transformer: 400V, 50Hz Control cabinet heat exchanger Automatic shutdown Leveling bolts and blocks Toolbox CE compliance Hinged belt chip conveyor Machine Size and Weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 16,500 kg Errors and prior sale excepted A wide range of automation options available

Condition: used, functionality: fully functional, power: 384 kW (522.09 HP), first registration: 08/2007, fuel type: diesel, empty load weight: 8,900 kg, tire size: 275/80 22,5, axle configuration: 6x4, gearing type: automatic, emission class: euro4, suspension: steel-air, number of beds: 2, total length: 8,950 mm, total height: 4,000 mm, Year of construction: 2007, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, fridge, parking heater, power assisted steering, second fuel tank, tachograph, WITH MOTORHOME REGISTRATION!!! Freightliner Coronado Detroit Diesel S60 series Ncsdpfey S Sbkex Aiyou Automatic transmission with clutch for starting and maneuvering. 2 beds, the upper one folds down. Camping plug/converter Tire condition: excellent Front camera Interior, typical for a Coronado, with everything you could wish for. The truck has too many extras to list. - For further questions, please contact us by email or phone. - Price includes German registration document. - Errors and prior sale excepted. - Financing and trade-in possible; we are open to offers. - KIPPHYDRAULIK available at an extra cost!!! - . - OUR motorhomes are CUSTOMS CLEARED and TAXED in GERMANY and INCLUDE an EU VEHICLE REGISTRATION DOCUMENT. WITH US, THE NAME STANDS FOR QUALITY. WE CAN – – Is your dream vehicle not among Europe's largest selection of US trucks? Is your company's or favorite color not available? No problem... we have 500 more trucks or motorhomes in the USA and Canada, new and used, of all brands. We also work with one of the best paint shops in Germany. Let us advise you and prepare a free quote. We look forward to your call or visit. Unfortunately, appointments are only possible by prior arrangement.

Condition: used, maximum load weight: 31,710 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2016, total width: 2,550 mm, Equipment: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment features. Complete specification available on request. - Wedge-shaped chassis with increased point load capacity, approx. 25,000 kg over approx. 5,000 mm - 24,000 kg telescopic support winches with load and fast operation modes - Lashing positions available in 5,000 kg, 6,000 kg, and 10,000 kg configurations - 8 stake pocket inserts (for 2nd bulkhead) - Aluminum roof girders with sliding tarpaulin - Rear stakes extendable to approx. 3,500 mm (for loading and unloading only) - Three sliding stanchions on each side Ncedjy Dy Ehopfx Aiyju - End stanchions extendable lengthwise in direction of travel - Complete front wall designed as storage compartment with integrated shelving system, interior closed - DINKEL mechanical lifting roof, height-adjustable, lifting roof height 400 mm, operable from both sides or one side only - Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) via stanchion height setting - Trailer can be driven under tarpaulin up to total height of approx. 4,400 mm (rear open over tail lift) - Upper rear portal crossbar with movable sliding tarpaulin - Four rows of stackable 150 mm aluminum slats on each side (two rows in upper bunk only), 450 mm pockets at bottom, four rows of pockets above, evenly spaced intervals - WABCO compressed air brake system with EBS to EC Standard 71/320 EEC incl. PREV - ECAS air suspension with raise/lower function - Wabco Smart Board with axle load display and hubodometer - 3 x 10,000 kg SAF axles with drum brakes - 3rd axle: friction-steered trailing axle - 1st axle liftable - Tires: 235/75 R 17.5 - Dhollandia heavy-duty tail lift, type DHLSU, load capacity 9,000 kg, load center 1,000 mm, steel platform approx. 3,000 x 2,500 mm - Hydraulic auxiliary stabilizers with automatic ground leveling - Tail lift with ramp function for inclined platform setup, usable as loading ramp – loadable up to max. 13,500 kg - Chassis painted in MB nova grey - White bodywork with customer-specific tarpaulin lettering

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Nodpfxoy Auhzo Aiyocu Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Ncodjwk Dc Rjpfx Aiysu Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: used, Year of construction: 2003, cutting diameter 325 mm Ncsdpfx Aieyv Ny Sjyeu saw band length 4200 mm cutting width 500 mm 15 - 150 m/min. work height max. 750 mm

Condition: used, functionality: fully functional, saw blade diameter: 400 mm, SCHMIDT sharpening machine for HSS saw blades Ncjdeyxhmcepfx Aiysu

Condition: excellent (used), mileage: 132,801 km, first registration: 04/2007, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 300 l, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, = Additional options and accessories = - Aluminum fuel tank - Brake booster - Low noise - Air suspension - Air horn - Reversing camera - Sleeper cab - Sun visor flap - Stability control - Toolbox = Further information = Front axle: Steered Rear axle: Twin tires Number of cylinders: 6 Engine displacement: 6,871 cc Unladen weight: 9,890 kg Technical condition: very good Visual condition: very good Price: On request MAN TGS 18.240 4X2 + FAUN VIAJET 6R/HS SWEEPER/ROAD CLEANER EURO 4 L PACKAGE 240 HP DRIVE 4X2 WHEELBASE 360 CM AIR SUSPENSION TGM SLEEPER CAB WITH AIR CONDITIONING & CAMERA MANUAL TRANSMISSION FAUN VIAJET 6R/HS SWEEPER CAPACITY 6 M3 WATER TANK 1200 LITERS HIGH-PRESSURE WATER PUMP WITH SPRAY BAR AT THE FRONT OF THE VEHICLE 1X SIDE BRUSH CENTRAL BRUSH ROLLER ROLLER BRUSHES ROAD CLEANER EXTRA HIGH-PRESSURE REEL WITH SPRAY LANCE JOYSTICK CONTROL MW32 PUMP Njdpfx Aouxv Sljiyocu 135 L/MIN 300 BAR -1 1500 77 KW 6,993 HOURS PRICE 22,500 EURO NET EX FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), Year of construction: 2016, Axial piston pump, hydraulic pump, oil pump, gear pump, screw pump -Manufacturer: Universal Hydraulics, hydraulic pump screw pump -Type: HSSPA-3/26.6-AVR-V4-01 -Motor: AC motors 3 kW -Dimensions: 760/250/H300 mm -Weight: 39 kg Ncjdpovt Scljfx Aiyou

Condition: new, Year of construction: 2026, Z-MaT U320 5-Axis Simultaneous Machining Center Control: ZMATROL 5-Axis Simultaneous, 15" LCD screen (optionally Siemens ONE, 15" LCD screen) (Siemens/Fanuc 4+1) Travel (X/Y/Z): 500/500/400 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 24,000 rpm, built-in Spindle taper: BT30 Spindle motor: 3.7/5.5 kW Air blast through spindle Spindle air curtain Spindle oil cooler Tool changer: 21-tool disc Max. tool length: 200 mm Max. tool diameter: 60/100 mm Table Table diameter: Ø 320 mm Max. workpiece diameter: 320 mm Max. table load: 80 kg T-slot (width x quantity x spacing): 14H8 x 8 x 45° Distance spindle center to table surface: 100–500 mm A-axis tilting travel: ±115° C-axis rotation: 360° Ncedeyv A Trepfx Aiyeu Max. rapid traverse A/C-axes: 100/130 rpm A/C-axis encoders Standard accessories Work completion lamp, 3-color status light Electronic handwheel (MPG) Work area lighting Roller linear guides Automatic grease lubrication system 3-axis glass scales with air purge (XYZ) Automatic tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip wash) Full enclosure Transformer: 400V, 50Hz Electrical cabinet heat exchanger Automatic power-off Leveling bolts and blocks Toolbox CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 1800 x 3270 x 2510 mm Machine weight: approx. 4,300 kg Subject to errors and prior sale Extensive automation options available

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection Ncsdow U H Sbspfx Aiyeu * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, Year of construction: 1984, sheet thickness: 3total power requirements: 2,2throat depth: 200motor: 2,2sheet length: 1100stroke: 56 Machine is in good conditions. Ncedjv H Hfnopfx Aiyeu

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm Nedpfstwlwzsx Aiyecu >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,530 mm, Year of construction: 2025, Equipment: ABS, 2-Axle Self-Steering Trailer, Type M2K-9L * COMPACT steering system * Corrosion resistance through powder coating * All components are bolted on * Conventional wiring * Brackets and components in stainless steel or galvanized * 2 individual axles, manufacturer BPW, 10 t with disc brakes, including safety cables * Air suspension * Air reservoir made of aluminum * Bogie model IX, with 1x mechanically telescoping beams * Tires 275/70 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Manual central lubrication * Paint: RAL 9011 Graphite Black * Payload approx. 14,550 kg 2-Axle Self-Steering Trailer, Type M2K-10B * Differences from M2K-9L: * Leaf spring suspension * 2 individual axles, manufacturer BPW, 12 t with drum brakes, including safety cables * Bogie model IX, with 1x hydraulically telescoping beams * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg Nedpfxsgqc Hbs Aiyecu 2-Axle Self-Steering Trailer, Type M2K-10L * Differences from M2K-9L: * 2 individual axles, manufacturer BPW, 12 t with drum brakes, including safety cables * Bogie model IX, with 1x hydraulically telescoping beams * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-Axle Self-Steering Trailer, Type M2R-10L Differences from M2K-9L: * ratio steering system (4-cylinder) * 2 individual axles, manufacturer BPW, 12 t with drum brakes, including safety cables * Bogie model IX, with 1x hydraulically telescoping beams * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 13,965 kg Various optional equipment available. Further information on request. Illustrations may differ from the original. Specifications are subject to change without notice. Contact: Niclas Lott Tel.:

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Ncsdpfezd Uv Ejx Aiyou Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Ncodsydnw Depfx Aiysu Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Condition: excellent (used), Year of construction: 1985, Ref:11083 . 1985 COMO 220 MC2 Guillotine. Swedish built heavy-duty guillotine for accurate cutting of paper and heavier substrates. Refurbished 2010 and upgraded to computer programme. Comprising; Right side table to facilitate rear loading of cutting bed Central air table Steel side tables Computer programme cut control, with keypad input of data Twin cut control buttons Nsdpfxoy Awy Ho Aiyscu Variable pressure clamp control Swift knife change system and adjustment Powered variable speed back gauge I.R. light beam guarding to UK HSE spec. 2 x HSS knives Including knife change tools and accessories. Specification: Cut width, Max: 220 cm Cut depth, Max: 220 cm Clamp opening :18.5 cm Electrics: 415V, 30A, 50Hz

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Ncjdpfx Ajy R Tk Rsiyju Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, grinding wheel speed: 12,000 rpm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment Ncedow Nycispfx Aiysu High-performance cutter grinder 5-axis Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, grinding spindle speed: 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment Ncodpow Nyc Asfx Aiysu High-performance cutter grinder 5-axis Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2020, Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp, Ncsdpoyvgc Nsfx Aiysu Loading system including 2 loading mandrels Ø 32 mm, Oil conversion including aerosol extinguishing generator and oil conversion kit, Control cabinet cooling unit, Automatic central lubrication, Marx VTG 0.32 electrostatic mist extractor, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit, Polar 2.9 Software for all standard curved and pointed teeth, Signal light to indicate operating status, Automatic switching of peripheral speed between CBN and DIA grinding wheels, F-1477 sawblade holder, Various spacers, Oil collecting pan. Saw diameter max: (40) 130 - 850 mm Saw diameter (unmanned): (75) 130-520 mm Tooth pitch: 1 - 40 mm Tooth height: max. 17 mm Number of teeth: 2 - 998 Saw blade thickness: up to 8 mm Loading capacity: 40 saw blades Grinding wheel diameter: (CBN or DIA - 14F1) Ø 200 mm Grinding wheel bore: 32 mm Coolant pressure: 6 bar Coolant tank: approx. 300 L Drive power grinding motor: 3 kW Connected load approx.: 6.5 kW (400 V / 50 Hz) 8.9 kVA Weight approx: 2000 kg Dimensions W x D x H approx.: 2400 x 1700 x 2200 mm colour: Grey

Year of construction: 2017, condition: new, Countersink Conical head DIN 335 B 80 HSS Length 200 mm Diameter 90 mm Ncedpfx Aijf Ett Ioyeu Weight 2.4 kg

Year of construction: 2014, condition: excellent (used), Thread drill Manufacturer: Emuge HSS - NE 2 M 80 x 3 Nodpfefhdwpox Aiyocu