Used Biesse Biesse Rover J Ft 1224 for sale (10,129)

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, TECHNICAL SPECIFICATIONS: Working area (x,y,z): 2900 x 1130 x 110 mm No. 6 work bars with vacuum cups, each with 3 cups BECKER vacuum pump, 90 m3 capacity Separate electrical cabinet + control console Software: BIESSEWORKS Safety mats DRILLING UNIT BH 17L Bsdpfx Aaszfi H Uo Ijwu No. of vertical drilling spindles: 10 No. of horizontal drilling spindles: 2 + 2 on the X-axis 1 + 1 on the Y-axis No. 1 blade unit for grooves on the X-axis CLAMPING UNIT: 7 kW electrospindle - ISO30 10-position tool changer

Condition: used, Year of construction: 2018, machine/vehicle number: 1000023651T, functionality: fully functional, power: 50 kW (67.98 HP), input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 3,200 mm, Equipment: documentation/manual, Selco WNAR 6 miter saw center. Bodjzl T Hljpfx Aa Iswu

Condition: used, maximum load weight: 29,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2007, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,329 mm, Year of construction: 2007, Equipment: ABS, 3-axle Schmitz Cargobull SKI 24SL 7.2 ALU box tipper VIN: 120059 Bwedpfxezdl U Sj Aa Ieu Chassis / Components: * Air suspension / Raise and lower function * Lift axle 1st and 2nd axle * Automatic lowering during tipping process * Tires: 385/65 R.22.5 * Remaining tire tread: Front ~40/30%, Middle 50%, Rear 30/50% * Foldable underrun protection * Steel chassis (fine-grained steel) Body: * ALU box tipper * CRAMARO E-roll cover * Remote control * Front cylinder Georg, high pressure 250 bar * Volume: approx. 24 m³ * Roll tarp * Work platform with access on the left * Rear door, internally mounted, with 2 hook locks * Aluminum floor, with aluminum wear plate 7mm, approx. 3,450 mm Weights: * Gross weight 35,000 kg * Payload 29,800 kg * Tare weight 5,200 kg Other: * German registration * 1 previous owner New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we value customer satisfaction highly, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day license plates / export license plates We will gladly help you with obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: good (used), Machining center composed of: 2 drilling heads (one upper and one lower) for vertical and horizontal drilling 1 upper milling unit and 1 lower milling unit 1 upper saw unit and 1 lower saw unit STANDARD CONFIGURATION Bwjdpfxoy E Ir Ee Aa Ieu

Condition: good (used), Progres Industriel Jones & Lamson lathe Bodpfx Aaencc H Ho Ijwu Type: Senna 1H Turning diameter bed: 520 mm Turning diameter bed max: 780 mm Turning diameter support: 380 mm Turning length: 3500 mm Spindle bore: 70 mm Speed: 1800 RPM Diameter faceplate type 3: 315 mm Diameter faceplate type 4: 310 and 440 mm Included tools, documentation and coolant pump Dimensions: 525x115x134 cm LxWxH

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 Bedpfx Aaelwqrto Ijwu Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support Bodpfx Aajvwgizj Iewu feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts Bodpfxog Urn Es Aa Iowu

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: Bodpfxehknbre Aa Ijwu 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE.

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) Bwodpfxjcr U Urj Aa Isu SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 2 pcs. SARG Vibration dowel inserting device. 1 pc. vacuum underpressure pump Part of the BIESSE line consisting of: Bwedjt N Rkvjpfx Aa Iju COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: new, Year of construction: 2026, functionality: fully functional, The Mercedes of cable peeling machines! The PR3 Evolution is produced entirely in our factory near Ulm. All purchased parts come from well-known manufacturers such as Siemens (electrical), Rittal (switch cabinet), KEB (gear motor) and Nachi (ball bearings). A machine truly MADE IN GERMANY! Robust, reliable and safe. The PR3 Evolution complies with the EC Machinery Directive 2006/42/EC Annex II A Technical data: Motor power 4kW / 380 V Cutting speed 44m / min Working range 1.5 mm2 - Ø 90 mm weight approx. 700 kg Dimensions W 1000 x L 1800 x H 1520 mm Bedjugt Dxjpfx Aa Ijwu Paint finish Ral 7037 / 7035 Subject to technical modifications 40 years of experience and over 500 machines sold worldwide speak for themselves.

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings Bwjdpfx Ajukhd Aoa Iju 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: excellent (used), Electronic programmer RT 483 No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Bwjdpfx Asfz Nanja Isu Max. working width (mm) 3200 Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Total power installed (Kw) 35,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: like new (used), Year of construction: 2008, I sell the throughfeed nesting CNC working centre Biesse Excel NBC 712 X1-S Year 2008. Very productive and fast. Automatic infeed table. Working area 3730x2200mm Configuration: Milling head HSK63 12kW, 1000-24000 rpm, independend Z-axis liquid cooling with the 8 position HSK63 magazine 16+8+4 Drilling heads 1 Grooving saw D.150mm 2-position X/Y 1 Revolving electrospindle with cutting aggregate liquid cooling Software BiesseWorks Advanced + Biesse Nest. CD included. Pumps 3pcs. BUSCH 3x 300/360 m3/hr. Bwodpfx Aaofwvppo Ieu Condition like new ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Bsdpfxsd Rg Dps Aa Iowu Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: ready for operation (used), Year of construction: 1984, Brand: Biesse Model: Forecon 51 Machine no: 401/83 Year model: 1984 Tech data: 1 horizontal drilling unit with 21 spindles 2 swivel drill units with 15 drill chucks each Center distance between spindles: 32mm Horizontal unit motor: 2Hk 2 vertical motors: 2Hk Spindles: 2800rpm Air pressure: 6-7 atm Air consumption per cycle: 17 l Bwodpfx Aoriutkea Iju Total engine power: 5.5Kw Comes with fence, see picture. Machine size: 1500x3140x1500mm Weight: approx. 590 kg Stock no: 2001355

Condition: good (used), mileage: 543,799 km, power: 175 kW (237.93 HP), first registration: 03/2016, fuel type: diesel, tire size: 265/70R19,5, axle configuration: 4x2, wheelbase: 5,950 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: steel-air, total length: 10,650 mm, total width: 2,550 mm, total height: 3,700 mm, loading space length: 8,500 mm, loading space width: 2,460 mm, loading space height: 2,450 mm, Year of construction: 2016, Equipment: ABS, cruise control, electric window regulation, power mirror, tail-lift, traction control, - 2. Diesel tank - Heated mirrors - Digital tachograph - Driver's card (recording device) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Radio/cassette - Lane keeping assist - Fabric Number of axles: 2, Configuration: 4x2, Tare weight: 8021 kg, Gross vehicle weight: 11990 kg, Total tank volume: 280 liters, 2. Diesel tank, Fifth wheel coupling: Fixed, Winch pulling capacity: 370 tons, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Driver's card (recording device), Digital tachograph, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Engine power: 175 kW (235 Hp), Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 8, Power steering, ABS, ASR, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, Cooling unit model: Aerocool, Cooling unit: electric, Body insulation, Heater, Wall thickness: 20 mm, Type of cooling: Cooling and freezing, Day/night cooling: Day/night cooling, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 1500 kg, Tail lift manufacturer: Dhollandia DHLM.30, Tail lift material: Aluminum, Tail lift size: 249 x 250, Spare tire, Spare tire tread depth: 3% Transmission Transmission: MB, 8 gears, Automatic Bedpfx Aaszg Uavs Iewu Axle configuration Tire size: 265/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 4 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Axle 2: Twin tires; Tire tread depth left inner: 6 mm; Tire tread depth left outer: 3 mm; Tire tread depth right inner: 13 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Weights Tare weight: 8,021 kg Payload: 3,969 kg GVW: 11,990 kg Functional Tail lift: Dhollandia DHLM.30, Rear door, 1500 kg Height of loading platform: 110 cm Cooling unit: electric Wall thickness: 20 mm Maintenance APK (technical inspection): valid until 04.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2004, total length: 9,560 mm, total width: 2,450 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 7,690 mm, color: other, Year of construction: 2004, Axle configuration Tyre size: 385/65 Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.860 kg Carrying capacity: 34.140 kg GVW: 38.000 kg Identification Bodezzk Iljpfx Aa Iewu Registration number: OH-84-RS

Condition: used, General Overview Bwodpfeydh Agjx Aa Isu Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2015, total length: 13,660 mm, total width: 2,470 mm, suspension: air, tire size: 385/55R22.5, wheelbase: 8,810 mm, color: blue, Year of construction: 2015, Axle configuration Tyre size: 385/55R22.5 Make axles: Valx Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.800 kg Carrying capacity: 37.200 kg GVW: 41.000 kg Condition Bwsdpfszzxx Sjx Aa Ieu Technical condition: good Visual appearance: good Identification Registration number: ON-64-VV Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - EBS - Twist-locks = Remarks = 45 FT Only. Empty Weight: 3.800 KG!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 51875350, Year of construction: 2024, Lease return Jungheinrich AGV 55 OTC Serial number 51875350 Bedpfx Aaozzyk Ao Iowu Year of manufacture 2024 New price: €165,000 Automated Guided Vehicle

Condition: good (used), axle configuration: 3 axles, first registration: 05/2015, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2015, Tyre size: 385/65R22.5 Make axles: SAF Empty weight: 4.765 kg Carrying capacity: 38.235 kg GVW: 43.000 kg APK (MOT): tested until 05/2027 Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information Bwsdpfx Ajzzz H Ssa Ieu = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks = Remarks = D-TEC Flexitrailer 2015 3x uitschuifbaar: voor, midden en achter

Condition: used, mileage: 259,028 km, power: 177 kW (240.65 HP), first registration: 10/2019, fuel type: diesel, tire size: 285/70r19.5, axle configuration: 4x2, wheelbase: 5,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,500 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2019, Equipment: tail-lift, Tire size: 285/70R19.5 Brakes: Disc brakes Bedpfxszzz Nts Aa Iewu Front axle: Steered; tire tread depth left: 8 mm; tire tread depth right: 8 mm; suspension: leaf spring suspension Rear axle: Double tires; tire tread depth left inner: 9 mm; tire tread depth left outer: 9 mm; tire tread depth right inner: 9 mm; tire tread depth right outer: 9 mm; suspension: air suspension Damage: none

Condition: excellent (used), Year of construction: 2018, operating hours: 15,854 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, feed length X-axis: 850 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, workpiece weight (max.): 500 kg, total height: 3,060 mm, total length: 3,075 mm, rotational speed (max.): 12,000 rpm, overall weight: 11,000 kg, spindle nose: SK40, number of slots in tool magazine: 30, chuck outer diameter: 3,325 mm, Equipment: chip conveyor, fume extraction, CNC 5-Axis Machining Center MAZAK Variaxis J600, 2018 You are welcome to inspect the machine in our workshop while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK Variaxis J600 is a powerful vertical 5-axis machining center for the precise and efficient complete machining of complex milling parts. It features a tilting A-axis (-120° to +90°) and a continuously rotating C-axis (±360°), allowing even complex geometries to be completed in a single setup – ideal for general mechanical engineering as well as series and single-part production. The robust design with travels of 850 mm in the X-axis, 550 mm in the Y-axis, and 510 mm in the Z-axis offers ample working space. The rotary table with Ø600 × 500 mm can accommodate workpieces with a maximum diameter of approximately 730 mm and a maximum height of 450 mm – with a maximum table load of 500 kg. The distance from the spindle nose to the table surface can be adjusted between 70 and 580 mm, enabling flexible accommodation of various workpiece geometries. The powerful milling spindle with speeds up to 12,000 rpm and the SK40 tool holder (DIN 69871) ensure high cutting performance and precision. The tool magazine (ATC) with 30 tool positions ensures short non-cutting times and flexible machining processes, even for complex manufacturing tasks. The machine is controlled via the modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. Comprehensive features ensure optimal machining conditions: internal coolant supply (IKZ), automatic tool length measurement, synchronous thread drilling, cylindrical interpolation, and the high-speed functions High Speed, Super High Speed, “G00 slope constant,” a KSS mist extraction system from LNS, a chip conveyor from Mayfran, and a Renishaw measuring system. With a machine weight of approximately 11,000 kg and dimensions of 3,075 × 3,325 × 3,060 mm (L × W × H), the model offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile 5-axis machining center that guarantees high precision, performance, and reliability in industrial production. Upon request, we offer delivery and commissioning of the machine as a comprehensive, all-inclusive package. You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG Bodozkmaispfx Aa Iswu