Used Battenfeld, New Screw And Cylinder for sale (34,107)

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 270/1330 Injection Molding Machine Basic Information Manufacturer: Battenfeld Model: HM 270/1330 Year of Manufacture: 2005 Category: Hydraulic Injection Molding Machine Clamping Unit Clamping Force: 2,700 kN (270 tons) Mold Platen Dimensions (horizontal × vertical): 1030 × 1020 mm Distance Between Columns (horizontal × vertical): 710 × 630 mm Minimum Mold Height: 350 mm Maximum Mold Opening: 1150 mm Injection Unit Hnsdpfxszc Efcs Ap Djn Screw Diameter: 55 mm Injection Volume: 650 cm³ Injection Shot Weight: 565 g Maximum Injection Pressure: 2040 bar Dimensions and Weight Net weight of the machine, including the control cabinet: approximately 12 tons

Year of construction: 2002, condition: ready for operation (used), Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible. Hedpey T Sdzsfx Ap Djnn

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. Hnedpeiyyndsfx Ap Don We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Hnedpfx Ajiyynwop Den Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: ready for operation (used), Year of construction: 2005, clamping force: 2,100 kN, overall weight: 9,200 kg, Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details. • Hydraulic system pressure: 210 bar • Rated motor current: 68 A • Control voltage: 230 V Hsdpfx Apjy Em D Tj Denn • Frequency: 50 Hz • Supply system: 3~N (3-phase + Neutral) • Rated voltage: 230 / 400 V • Rated current (1st supply): 120 A • Rated current (2nd supply): 97 A • Max. fuse protection (gL): 125 A

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8310’ black-and-white production system Item for sale: 1 x Ricoh Pro 8310 with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 431,372 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Hnsdpfxjy Altbj Ap Djn Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, injection pressure: 3,000 bar, mold height (min.): 200 mm, opening stroke: 450 mm, overall weight: 4,800 kg, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A Hnodoy Akn Rspfx Ap Don machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Condition: excellent (used), I am offering a professional LUKAS LZR 12/550 hydraulic rescue cylinder, used by fire brigades and in technical rescue operations. This equipment is from the renowned German brand LUKAS, designed for rescue work during road accidents and technical operations – very robust and durable construction. Condition: The item is used. Normal signs of use are visible (scuffs, worn label – see photos). Technical condition is unknown – sold as untested / for inspection. Technical data (from markings): Model: LZR 12/550 Manufacturer: LUKAS (Germany) Type: hydraulic cylinder / spreader Application: technical rescue, hydraulic power Equipped with working tips Set includes: LUKAS LZR 12/550 hydraulic cylinder Mounting element as shown in the photos Hjdjyxtabjpfx Ap Denn Applications: Fire brigades (voluntary and state) Road rescue operations Technical and maintenance work Can also be used in hydraulic power applications.

Year of construction: 1969, condition: good (used), functionality: fully functional, Heidelberg Cylinder SBG 57x77cm, ref. 2977 Maximum sheet size: 56 x 77cm Serial number: SBG 34722 Automatic feeder In good working condition. Hnedpfeyyaxmox Ap Don Available immediately.

Condition: new, Year of construction: 2023, functionality: fully functional, NEW PLANT / READY FOR OPERATION / IMMEDIATELY AVAILABLE HT 45 SM2 / SIEMENS - with driven tools CNC lathe for the complete machining of turned and milled parts with 2 spindles, 2 tool systems, 5 linear axes and 2 rotary axes, integrated spindle motors on main and counter and counter spindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 - 7000min-1 Counter spindle 0 - 7000min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar capacity ø 45mm) Counter spindle: KK5 Includes: - Hollow clamping cylinder on the main spindle - Draw tube for main and counter spindle - Mechanical spindle brake (main/counter spindle) - Part ejector and flushing through the counter spindle - Control Sinumerik 840D-sl / OPERATE o emcoNNECT/APP-based user interface o 22" multi-touch display o IPC with 240 GB o SHOPTURN dialogue programming o USB interface o Network drive / Ethernet o 3D simulation o and much more - 2x 12-fold tool turret VDI 25 radial with directional logic for up to 2x 12 driven tool stations Swivel speed adjustable with feed switch! Performance data: -Max. 4kW at 2080 rpm -Torque constant 16 Nm -speed range 0-6000 rpm -C-axis for main and counter spindle -TRANSMIT software for simple C-axis programming - Chip conveyor with an ejection height of 1100mm programmable Type "hinged belt" ) - Coolant device integrated in the chip conveyor 2 pcs. High pressure pumps with 14 bar 2 pcs. flushing pumps with 3,7 bar Air gun with spiral hose - LED machine room light - Hydraulic power unit Hnodpfx Apslxqf Nj Den - Documentation

Condition: used, This listing is for the New Brunswick C585-86 Ulta Low Freezer The unit is in full working condition and is ready for immediate use The New Brunswick C585-86 Ultra Low Freezer is a high-capacity laboratory freezer designed for the secure long-term storage of biological samples, reagents, and temperature-sensitive materials. With a temperature range of −50°C to −86°C, it provides stable ultra-low temperature conditions suitable for research laboratories, biobanks, pharmaceutical facilities, and clinical environments. Hnedeyuwvqjpfx Ap Den This model offers a generous 585-litre storage capacity and robust construction to support demanding laboratory workflows. The advanced refrigeration system ensures reliable temperature control with efficient pull-down performance, reaching −85°C from ambient temperature in approximately 4.5 hours. The C585-86 features a durable stainless-steel interior and high-performance insulation designed to maintain temperature stability while reducing energy consumption. Integrated monitoring and alarm systems help protect valuable samples by alerting users to temperature fluctuations or power interruptions. Built for reliability and long-term operation, the New Brunswick C585-86 ultra-low freezer is a dependable solution for laboratories requiring secure storage of biological materials, vaccines, enzymes, and research samples.

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. Hjdpjtxinaefx Ap Djnn The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO Hsdoy Tn Enspfx Ap Donn ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann

Condition: excellent (used), Year of construction: 2018, 🔧 *M028 — Wittmann Battenfeld Wittmann Battenfeld MACROPOWER 700 / 2250* (2018) 📐 *CLAMPING UNIT* • Clamping force: 700 T • Coining: YES • Max mold weight: 10000 kg • Max mold weight per plate: 6600 kg • Size between bars (WxH): 1100x950 mm • Min mold height: 450 mm • Max mold height: 950 mm • Max stroke open: 1850 mm • Centering ring FIX / MOVE: 200 / 200 mm • Fast clamping system: NO Hodpfx Apjy Tn Dkj Djnn 🔌 *MOLD INTERFACE* • Heating zones: 24 (16 pin TC, 16 pin PW) • Water cooling circuits: 18+6 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 12 • Hot runner sliders pneumatic: 7 💉 *INJECTION UNIT* • Screw diameter: 65 mm • Nozzle face + thread: R??+M30x2 • Injection unit type: 2250 • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2070 Bar • Max injection rate: 422 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES • Sockets 400V/16A: 4 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 3 • Air pressure ports: 4 • User inputs / outputs: 0 / 0 \+ Robot Wittmann W833PRO-0469 (X-900, Y-1800, Z-3000, Payload: 10,6 kg) \+ conveyor Belt with cage

Condition: good (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 251 cm³, total length: 4,650 mm, total width: 1,450 mm, total height: 2,050 mm, overall weight: 4,600 kg, type of input current: DC, input frequency: 50 Hz, input voltage: 460 V, For sale is an injection molding machine from Battenfeld, model HM1000-75 131426-100. The machine is in excellent condition and is ready for immediate use. Hnodpfx Asy En Sfep Den Technical Data: Model / Type: HM 100/750 S Year of manufacture: 2008 Total weight: 4,600 kg Hydraulic operating pressure: 275 bar Pneumatic operating pressure: 6 bar Rated voltage: 400 V Frequency: 50 Hz Rated motor current: 40 A Control voltage: 24 V DC Wiring diagram number: HMB6S131426-100 Rated current: 120 A Max. pre-fuse gL: 100 A Clamping force: 1,000 kN Clear tie bar spacing: 420 x 420 mm Screw diameter: 40 mm Shot volume: 251 cm³ Max. shot weight: 228 g Length: 4,650 mm Width: 1,450 mm Height: 2,050 mm Transport and loading can be arranged across Europe upon request, at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery purchase and sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Gjbn N Ay Dowza Dxogoil Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell one? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2004, clamping force: 1,000 kN, clearance between the columns: 420 mm, displacement volume: 192 cm³, type of input current: DC, input frequency: 50 Hz, input current: 80 A, For sale: Battenfeld injection moulding machine, model HM 1000-750. The machine is in good condition and ready for immediate use. Technical data: Model / Type: HM 1000/750 Year of manufacture: 2004 Control system: Unilog B4 Total weight: 4,600 kg Hydraulic operating pressure: 240 bar Pneumatic operating pressure: 6 bar Rated voltage: 230/400 V Frequency: 50 Hz Rated motor current: 40 A Control voltage: 24 V DC Wiring diagram number: HM B4500028412 0 Max. main fuse: 80 A (1st power supply) / 50 A (2nd power supply) Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Maximum shot volume: approx. 192 cm³ Total input current: 63 A or 80 A Transport and loading can be organised Europe-wide upon request and at an additional cost. Prices are subject to VAT. Hnjdpfx Apoy Enh Tj Djn Inspection is possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange is possible! Machinery Trade / Purchase BUYING & SELLING PRODUCTION AND METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph Hjdpfxerwz I Ao Ap Dsnn

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Hodpfx Apowzyg Hs Denn

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 55 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, NEW !!!industrial axial fan 910mm diam 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2311/ 3PCS IN STOCK Diameter 910mm 400V 29000m³/h 680/520 rpm manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Flow rate (m³/h): 29000 Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Bearing mounted Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Connection type: Terminal box Speed ​​(rpm): 680/520 Hnodexx U Tgepfx Ap Djn Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102

Condition: used, SPENCER AND HALSTEAD AUTO SHOT BLASTER SAND BLASTER Hnodpfx Apeydic Ij Dsn Belt type Automatic shotblaster.

Year of construction: 2005, condition: ready for operation (used), Clamping force: 450t, opening stroke: 950mm, tie bar spacing X/Y: 800mm/970mm, operating pressure: 210bar, weight: approx. 20400kg, control system: Unilog B4. An on-site inspection is possible. Hodpfxjy Nnads Ap Dsnn

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Hjdpfetqmwgex Ap Djnn Lubeca LW303 can seamer

Condition: used, Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, displacement volume: 5,655 cm³, injection pressure: 1,632 bar, total length: 11,600 mm, total width: 2,900 mm, total height: 2,500 mm, overall weight: 76,500 kg, clamping force: 10000 kN distance between tie-bars h x v: 1120 x 1400 mm size of mould plates h x v: 1960 x 1690 mm min. mould height: 550 mm max. mould height: 1020 mm max. open daylight: 2120 mm opening stroke: 1100 mm screw diameter: 120 mm swept volume: 5655 ccm injection pressure: 1632 bar Hodsywg N Tspfx Ap Denn equipment included screen text german complact flash drive core pulling hydraulically 4x Anti vibration mounts electric interface for handling units according to Euromap 12 interface for temperature control units increased oil cooler mould heating 16x measures of machine l x w x h: 11.6m x 2.9m x 2.5m total weight: 76500KG

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Hnsdpfjnxi Uujx Ap Dsn Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Hnjdpfxonxi R Uo Ap Don Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting