Used Büter Hebetechnik Ha 05-50 for sale (46,497)

Condition: new, maximum load weight: 2,200 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,350 mm, Equipment: tail-lift, Through-loading box trailer with a tail lift These are not original photos; the trailer only has a combination lashing rail. Deviations may occur. Technical specifications: * Total weight: 3500 kg * Internal dimensions: L: 420 cm x W: 210 cm x H: 235 cm * Payload: 2200 kg * Loading height approx. 90 cm * Chassis welded and hot-dip galvanized Guodpotp Apxjfx Adceh * Lightweight sandwich box body * Roof and walls approx. 25 mm * Tires 14 inches * Braked axle * Multiplex flooring, 15 mm * Support wheel * 1 row of combination lashing rails * 5 pairs of floor lashing rings * Front portal doors with stainless steel rotary latch * Aluminum base protection strip, 160 mm high * Interior lighting as a light strip with switch * Lighting system 12 volts, 13-pin connector * Aluminum ramp, foldable inside in front of the portal door, secured with a slide, height approx. 50 cm, can be folded up onto the drawbar * Dhollandia tail lift with hydraulic support We manufacture bodies of all sizes and types for any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodies - Complete vehicles - Trailers - Consulting - Financing Errors and prior sale are subject to change; no liability for printing and input errors.

Condition: used, Vötsch Guodpfxoziizao Adcsh Type: VT 3050 Assemblies / Test cabinet: Temperature chamber Air-cooled Test chamber volume: 500 liters Temperature range: -30°C / +100°C Temporal temperature fluctuation: K ±0.5 Spatial temperature fluctuation: K ±1.5 Temperature gradient: K 3 Rate of change: Heating: K/min 2.0 Cooling: K/min 1.4 Heat compensation: max. W 650 Calibration values: +23°C, +80°C Test chamber dimensions: Width 710 mm, Depth 590 mm, Height 1250 mm External dimensions: Width 940 mm, Depth 1030 mm, Height 1955 mm Sound pressure level: db(A)

Condition: new, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 700 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 8,000 kg, table length: 1,150 mm, table width: 550 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 32,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, spindle nose: SK 40 BIG PLUS, spindle speed (max.): 12,000 rpm, table load: 700 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The LAGUN L 1050 machining center stands for high precision, robust design, and economical production. Ideal for single-part production as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ 24-month warranty Technical equipment: Control system: • HEIDENHAIN TNC 7 basic digital control • HEIDENHAIN 16" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal articulated band chip conveyor Guedpfx Adoh Ekq Decjh ✔ Preparation for the integration of a rotary table ✔ Complete enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and create a customized offer for you.

Condition: new, empty load weight: 410 kg, maximum load weight: 2,090 kg, overall weight: 2,500 kg, loading space length: 3,010 mm, loading space width: 1,500 mm, loading space height: 350 mm, tire size: 185/70R13, Sturdy braked low-loader with tandem axle from the manufacturer ANSSEMS model BSX2500 301x150. As standard equipment, the Anssems box trailer with brake has aluminum side walls, internal locks, external lashing eyes, profile channels for mounting accessories or load securing, very stable welded steel frame, railing on the side, front high frame, front flap, pull-out supports for tailgate, support wheel and a V-drawbar. Guodpfx Adsrz Rydocjh We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, tool box, lashing eyes, straps and lock.

Condition: used, functionality: fully functional, Manufacturer: Arthur Klink Year of construction: ca.1960 Type: horizontal broaching machine Model: RH 10-50 Machine. No.: 241 Weight: 3.700 KG General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design Clearing stroke: 1,500 mm Tractive force: 10,000 kg (100KN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece clamping surface: Ø 460mm Workpiece diameter: max. approx. 750mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: hydraulically infinitely variable from 5 m/min to 30 m/min Space requirement of the machine: (w x d x h) approx. 6500mm x 950 mm x 1,400 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 8kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter Accessories - 1 universal pulling head for flat shafts from 3mm to max. 25mm wide - Adapter sleeve for drawbridge from Ø 85mm to Ø 63mm Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is well suited for heavy profile broaching tools. The machine is used and is in very good condition for its age. The machine is in our warehouse and can be inspected under power. The machine is currently not technically and visually refurbished, but can be used immediately. Pulling heads for profile broaching are mostly available used on request depending on DIN standard, dimensions and stock. Direct contact details and further information can be found in the attached PDF document Guodpfer A Hdgjx Adceh

Condition: good (used), Bluhm Legi-Air 4050 RH Label Printing and Dispensing System Bluhm Legi-Air 4050 RH Label Printing and Dispensing System with Zebra ZE500-4 print module The Bluhm Systeme RH Legi-Air 4050 is a powerful labeling machine with an integrated thermal transfer printer, ideally suited for automatic product labeling in production and logistics processes. The unit is equipped with a print module, applicator, control unit, and numerous interfaces, enabling precise and reliable label application. Motor-driven large roll unwinder Label rolls with a roll diameter of up to 430 mm and 900 meters of label material ensure long, uninterrupted production runs. A tandem operation ensures continuous production. Dispensing head Quickly interchangeable dispensing heads allow for processing label sizes ranging from small nameplates to DIN A5-sized EAN128 shipping labels. The Quick-Change option enables format changes in seconds. Spring-mounted dispensing heads compensate for unevenness on product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Ideal for print and apply labeling applications for products, cartons, outer packaging, and pallets in the following areas: • Manufacturing and warehousing • Automotive industry • Pharmaceutical industry • Food and beverage production • Healthcare and beauty industry Standard Features • Printing methods: Thermal transfer or thermal direct • Orientation: right or left • All-metal, industrial-grade construction • 16 MB SDRAM, 64 MB Flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality Godpfxjibh Tks Adceuh • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Media Specifications Labels Media thickness (label and liner) • ZE500-4: 0.135 mm to 0.254 mm Media types • Continuous, die-cut, or with a reflective mark Ribbons Maximum roll size • 101.6 mm outer diameter with a 25.4 mm core inner diameter Standard length • 600 m capacity Connectivity • Parallel interface: Centronics®-compatible • Serial interface: RS-232 • USB 2.0 • Internal ZebraNet™ 10/100 • Applicator interface with DB-15F connector • Optional ZebraNet b/g Print Server Fonts/Graphics/Symbologies Fonts and character sets • Zebra Global Printing Solution including Unicode™ • Swiss 721 font standard • Bitmap fonts A to H and GS symbols can be expanded tenfold, • independent of height and width • Infinitely scalable font Ø (CG Triumvirate™ Bold Condensed) can be expanded point by point, • independent of height and width • International character set IBM®-Codepage 850 • With UFST® from Agfa Monotype Corporation • Firmware support for downloadable TrueType™ fonts • Additional fonts available Graphics features • Supports custom fonts and graphics, • including customer-specific logos • Barcode symbologies • Support for all 1D and 2D standard barcodes Barcode symbologies • Support for all 1D and 2D standard barcodes Technical Data Maximum print width • 104 mm Media specifications • Width of labels and liners: 16 mm to 114 mm • Minimum length with rewind: 13 mm • Minimum length without rewind: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Guodpfx Aeidun Dedcjh Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: ready for operation (used), Bosch SD-B5.250.015-05.000, brushless, permanent magnet servo motor, serial number: 746000208. One connector is slightly damaged, see photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Gusdpfsi D E U Hox Adcoh

Condition: ready for operation (used), Fanuc A06B-0502-B002 AC servo motor, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Gusdpfx Asi D H E Iodceh

Condition: new, Fanuc A06B-0505-B002 #7000 AC servo motor, serial number: C912A2440, unused, with signs of storage, 100% functional. Scope of delivery as shown in the photos. Gusdsi D H Hdjpfx Adcjh

Condition: new, Fanuc A06B-0514-B504 #7000 AC servo motor, serial number C926C2277, unused with signs of storage, 100% functional, scope of delivery as shown in the photos. Gsdpfoi D H Ibox Adcjuh

Condition: ready for operation (used), Indramat 2AD 100D-B050A1-AS03 asynchronous main drive motor, serial number as shown in the photo, professionally completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Gjdpfx Aei D Ifnedcsuh

Condition: ready for operation (used), Mitsubishi HA33NC-S servo motor, serial number: 15017 + OSA253S2 encoder, serial number: J4AVU492R6S, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Godji D I Rgspfx Adcouh

Condition: ready for operation (used), Siemens 1FT5042-1AF71-4EA0 AC servo motor, serial number: YFN817341801004 + Heidenhain ROD 426 2500 27S12-03 rotary encoder. 376 846-LT, serial number: 19847145A, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Godji D Rzrjpfx Adcjuh

Condition: ready for operation (used), Siemens 1FT5062-0AC01-0 - Z Permanent Magnet Motor, Z = see nameplate, serial number: E0Y60054601010. This motor was completely overhauled by Siemens and then stored for a long period. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Gujdpfxei D R I Re Adcsh

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4EG0 AC variable speed drive, serial number: EL081662505015 + ROD 426 360 27S12-03, used, significant signs of wear, 100% functional, scope of delivery as shown in the photos. Gsdpoi D Slijfx Adcouh

Condition: ready for operation (used), Siemens 1FT5074-0AC01 - Z Permanent Magnet Motor, Z = see nameplate, SN: E5E86575801005. The motor was completely overhauled by Siemens and then stored for a long time. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Gujdpoi D Svlefx Adceh

Condition: new, GMN TSE 240 cg - SP: 3000-3600-4000-5000 RPM / 37 grinding spindle, shaft diameter: 130mm, front overhang at the thread: 102mm, including test report and installation instructions, new condition: €25,000, unused, 100% functional, scope of supply as shown in the photos. ATTENTION: Please request the costs for packaging and shipping separately! Guedpfx Asi D U Trjdcjh

Condition: new, Heidenhain EA 552 . 339 317-01, serial number SN:10507757X, as shown in the photo, unused in original packaging, 100% functional. Guodpji Eagtjfx Adcoh

Condition: new, Heidenhain LID 400-0010 scale, . 232206-18, serial number: 7828137, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Gusdpfei Ean Ejx Adcoh

Condition: ready for operation (used), Indramat DDC01.2-N200A-DL05-01-FW Digital A.C. Servo Compact Controller DDC, serial number: 270012-03456, used, 100% functional. Gjdpfx Aei Ebd Njdcouh

Condition: ready for operation (used), Siemens 6ES7416-3FR05-0AB0 S7-400, CPU 416F-3 PN/DP central processing unit, version 4, software version V5.2.0, serial number as shown in the photo, like new, professionally tested, 100% functional, scope of delivery as shown in the photos. Gedpfoi Edt Hsx Adcouh

Condition: ready for operation (used), Siemens 6ES7416-3FR05-0AB0 S7-400, CPU 416F-3 PN/DP central processing unit, version E, status 4, software version V5.2.1, serial number as per photo, like new, professionally tested, 100% functional, scope of delivery as per photos. Godpji Edt Ujfx Adcsuh

Condition: ready for operation (used), Siemens 6ES7416-3FR05-0AB0 S7-400, CPU 416F-3 PN/DP central processing unit, version 4, software version V5.2.0, serial number as shown in the photo, in new condition, professionally tested, 100% functional, scope of delivery as shown in the photos. Gsdpfx Asi Edugsdcjuh

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 33,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis, Semi-Trailer, Tipper Fine-grained steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones With anti-splash flaps, only on the last axle 1 tarpaulin rod with bracket 2 towing hooks at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 tamper-proof coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle – Driving Stability System Gusdoi Ri Ihopfx Adcjh Wheels and Tires 385/65 R22.5, manufacturer’s choice Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the tractor unit’s display, via EBS, without installation in the truck (this must be available in the truck. Only on base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pin tamper-proof sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck auxiliary drive Tipping Body Aluminum box tipper body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with outer wall made of 30 mm hollow chamber profiles, neatly welded, with top edge profile that prevents material from spilling out. Inside with access ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline – tapered and aerodynamic tipper body design Membrane – rear wall Rear wall with double-joint hinge, mounted to allow movement, with 2-part door division 1/2 to 1/2, at the top with a pivoting gantry, with one grain slide per door. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor consistently 6 mm thick Standing platform with access ladder, connection plate for air/electrical and brake with large clearance for best possible operation. Roller cover, single-sided for depositing on the right-hand side, with central locking on the left-hand side Approval Country/Signage Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagra