Used Atlas Breite 60 Cm for sale (31,852)

Condition: excellent (used), Year of construction: 2016, volume flow: 2.2 m³/h, pressure (min.): 8 bar, ATLAS COPCO GA 11 VSD + screw compressor Variable speed drive (inverter controlled) 11 kW motor Capacity: 1.95 m3/min Dsdjytyh Hjpfx Aa Ieku Pressure: 13 bar Year of manufacture: 2016 Operating hours: 9270 hours

Condition: excellent (used), Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 260 mm, unused -Groove width: 24 mm -Hole: Ø 50 x 45 mm -Number: 2x pulley available -Price: per piece Dodpfx Aajzh U N Ts Isku -Dimensions: Ø 260 x 45 mm -Weight: 6.6 kg/pc.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Dkjdeziizmspfx Aa Ieu Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, Year of construction: 2012, operating hours: 6,000 h, Steel tracks, central lubrication, used vehicle Dsdpfxjzhzgre Aa Ioku Vehicle No. 3361, Atlas 240 LC tracked excavator, year of manufacture: 2012, operating hours: 6,000, cab with air conditioning, tiltable cab, rearview camera, 6-cylinder Cummins diesel engine with 125 kW, 600 mm steel tracks, hydraulic connections for attachments, central lubrication system, Lehnhoff quick coupler, hydraulically tiltable bucket 1,600 mm, weight: 25,100 kg. For inquiries, please note, errors and interim sale excepted.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DMG MORI CMX 600V was manufactured in 2017. It features a spindle speed range of 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 600 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm, along with a table size of 900 x 560 mm. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 600V vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 30 m/min Dkodpfx Aozh H Etja Iou • Table: 900 x 560 mm • Tools: • Tool changer positions: 30 • Machine hours: 250 cutting hours • Condition: like new

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO TYPE GA75 FF PLUS S/N API619181 YEAR 2014 POWER (kW) 75 Dsdszicypspfx Aa Ieku CAPACITY (m3/min) 14.95 DISCHARGE PRESSURE (bar) 7.25 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes, R410a 1.1 kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: used, Year of construction: 1994, 1994 | Atlas Copco Qas 28 | Used Generator Set 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 23 inspection points 18 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Generator Set 30 kVA, 77A/44A 230V/400V. Circuit breakers 40A and 16A. A 32 A socket added on the fly. Number of hours unknown. Works well. Year 1994. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39926 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Dkodsy Rukfepfx Aa Iou ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Fanuc A06B-2063-B003 AC servo motor, serial number: C175F0F3C, with A860-2070-T321 pulse encoder, serial number: [missing], used, in good condition, 100% functional, scope of delivery as shown in the photos. Dkedpoy U Tlpjfx Aa Isu

Condition: used, mileage: 883,130 km, power: 340 kW (462.27 HP), first registration: 05/2007, fuel type: diesel, number of seats: 61, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: white, brakes: retarder, Year of construction: 2007, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: used, Year of construction: 2014, machine/vehicle number: APF194822, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Dkjdezclgaspfx Aa Iou Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm MACHINE DETAILS Operating hours: 53,000 h EQUIPMENT Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: good (used), Roller conveyor, conveyor belt, roller track Dkodpfx Aajyw H Hrj Iou -Manufacturer: Soco System, non-powered roller conveyor, 2-section, 2.0/2.0 m, height adjustable -Track width: 600 mm -Rollers: Ø 48x15 mm -Price/Fee: complete -Dimensions: 2000/820/H720 mm / 2000/670/H650 mm -Weight: 150 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 3,611 h, PROD. ATLAS COPCO TYPE GA90 S/N API624230 YEAR 2016 POWER (kW) 90 CAPACITY (m3/min) 16.48 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 3611 VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air Dksdpfxszxxnbj Aa Iju ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: -6 lashing eyes -Hand pump -V-drawbar, bolted Net price: €3,655.46 / Gross price: €4,350.00 Article number: CHB227281610.02 Technical data: • Brand: Hapert Trailers • Model: Cobalt HB-2 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 280 x 160 x 30 cm • External dimensions (LxWxH): 420 x 166 x 96 cm • Loading height of the floor: 66 cm • Permissible total weight: 2,700 kg • Unladen weight: 602 kg • Payload: 2,098 kg • Chassis: High-sided trailer (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO/BPW rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • New side panel hinges incl. welded-on hooks for securing, among other things, a load securing net. • Aluminum side panels with robustly installed latches • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Socket for tarpaulin frames, grid extensions, side panel extensions or front wall extensions at all 4 corners • Load securing net hooks on hinge lower parts • Stable eccentric latches • Galvanized steel sheet on a multiplex floor panel • Reinforced, stable, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in a high point load capacity • Additional longitudinal struts continuously welded • All cross and longitudinal members rest on the floor • 6 lashing eyes recessed inside the side edge (1000 DaN/kg), TÜV certified! • U-profile on the rear, for easier attachment of the loading ramps • Loading ramp shaft prepared • Solid 4-stage hydraulic cylinder • Hand pump • Maintenance-free rubber spring axles from ALKO/BPW • Automatic reversing mechanism • ALKO/BPW inertia coupling and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting Dksdpfxszu N Spj Aa Isu • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years - Errors, omissions and prior sale are reserved -

Condition: excellent (used), Year of construction: 2008, ATLAS COPCO GA90VSDFF screw compressor, equipped with a frequency converter and air dryer, recently serviced. Technical data: capacity: 17.070 m3/min; 90 kW motor; maximum pressure: 12.8 bar; operating hours: 13435 h; year: 2008. Price: 48,500 net Price: 59,655 gross The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support. Dksdozzbyfspfx Aa Isu

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 305 kW (414.68 HP), Description: Screw compressor with drum dryer ZR315VSD Dodpfx Aajvyq Tpe Isku Characteristics: Capacity 8.60 bar Power 305 kW Voltage 500 V Running hours at last maintenance: 46383

Condition: good (used), functionality: fully functional, Description: Screw compressor with drum dryer ZR 250 1997 Characteristics: Capacity 7.50 bar Power 245 kW Voltage 500 V Dkodpevyrtdsfx Aa Iju

Condition: used, Year of construction: 2024, operating hours: 698 h, functionality: fully functional, machine/vehicle number: APP889037, overall weight: 3,500 kg, total length: 5,760 mm, total width: 1,987 mm, total height: 1,973 mm, motor manufacturer: Cummins B6,7, power: 231 kW (314.07 HP), fuel type: diesel, volume flow: 19 m³/h, pressure (max.): 25 bar, Equipment: type plate available, We are offering this used Atlas Copco X-Air+ 750-25 reciprocating compressor, manufactured in 2024, for sale. Model: X-AIR+ 750-25 Max. operating pressure: 25 bar Speed: 1920 rpm Engine power: 231 kW Permissible total weight: 3500 kg Support load: 70 kg Axle load, axle 1: 1765 kg Axle load, axle 2: 1665 kg Djdpsz A Daujfx Aa Ieku Serial number: APP889037 Date of manufacture: 05/2024 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, PROD. ATLASCOPCO Djdoz Dhqtjpfx Aa Ioku TYPE G15FF S/N ITJ078586 YEAR 2026 POWER (kW) 15 CAPACITY (m3/min) 2.45 PRESSURE (bar) 9.75 HOURS (RUNNING/TOTAL) 0 INVERTER no BUILT-IN DRYER yes, R513a 0.47kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK yes, 500L DOCUMENTS yes CONNECTION 1' NEW/USED NEW

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 Dkodorp D Uxopfx Aa Iou year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 power 2.1 KW Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Dkjdpfsvu Hrkox Aa Ieu Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 Dkodjzi Dbhopfx Aa Isu HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: new, Year of construction: 2026, CORMAK CMS260 Multi-Function Machine The CORMAK CMS260 multi-function machine is an advanced 5-in-1 multifunctional machine combining the functions of a table saw, planer/thicknesser, spindle moulder and drill press. Designed to maximize functionality in a limited workspace, it is an ideal solution for professional woodworking shops, craftsmen and wood processing facilities looking for an efficient, precise and compact machine. Main Advantages of the CORMAK CMS260 5 functions in one machine – table saw, spindle moulder, drill press, planer and thicknesser. Three independent high-power motors – ensure continuous and efficient operation without compromise. Precision cutter block – equipped with three HSS knives, ideal for accurate surface finishing. Aluminium sliding fence – the triangular guide design increases cutting accuracy and repeatability. Saw blade angle adjustment from 0° to 45° – easy adjustment using a handwheel. Compact design – ideal for workshops with limited working space. CE compliance – complete technical and operating documentation (DTR) in Polish. Construction and Technology The CMS260 multi-function machine has been designed as a multifunctional woodworking machine in which the individual working modules operate independently, resulting in greater work efficiency and eliminating the need for additional adjustments. The machine is built on a solid steel base, ensuring stability even during intensive operation. Each function — including the table saw, planer/thicknesser, spindle moulder, etc. — has been optimized for operator safety and ergonomics. Protective guards, folding tables and an efficient dust extraction system all contribute to operator comfort and safety. Precision and Performance Thanks to the use of three separate motors (2.2 kW for the saw and planer, 1.5 kW for the spindle moulder), the machine enables intensive operation without a loss of torque. The spindle moulder offers four spindle speed settings (1,400, 4,000, 6,000 and 9,000 rpm), allowing the operating parameters to be optimally adjusted to the type of material being processed. Standard Equipment 254 mm diameter saw blade Cutter block with three HSS knives Aluminium sliding fence Folding planer tables Folding chip guard, Ø100 mm Optional Equipment Drill chuck (available for PLN 1,490 gross) Technical Specifications Table Saw Maximum saw blade diameter 254 mm Saw blade arbor diameter 30 mm Saw blade speed 4,000 rpm Saw blade tilting angle 0° to 45° Maximum cutting height at 0° to 45° 78 (63) mm Motor power 2.2 kW Power supply 400 V Planer / Thicknesser Cutter block diameter 70 mm Number of knives 3 pcs. Cutter block speed 5,500 rpm Feed rollers 32 mm Maximum planing width 260 mm Dkodpfxjv R Td Ej Aa Iju Maximum planing depth 3 mm Fence tilting angle 0° to 45° Maximum thicknessing width 258 mm Maximum workpiece height in thicknesser mode 225 mm Maximum thicknessing depth 4 mm Feed speed 7 m/min Motor power 2.2 kW Main table size 920 × 410 mm Sliding table 238 × 1320 mm Dust extraction pipe diameter 100 mm Spindle Moulder Spindle diameter 30 mm Spindle speed 1,400 / 4,000 / 6,000 / 9,000 rpm Spindle clamping length 105 mm Maximum spindle travel 110 mm Maximum table opening 160 mm Motor power 1.5 kW

Condition: used, Year of construction: 2009, operating hours: 14,500 h, Atlas TW 140 Year of manufacture: 2009 14,500 operating hours Approx. 16 tons 1 hydraulic grab German machine Visit our website as well: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/...?... Roman We will be happy to assist you with financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: 2,000 EUR Our services for you: Dodszdxynepfx Aa Ieku - Customs registration - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station

Condition: excellent (used), CATALOGUE NUMBER: 6935 TECHNICAL DATA - Shaft width: 630 mm - Number of knives: 4 pcs - Maximum thickness of the workpiece: 210 mm * Top: - Feed pawls - Toothed infeed shaft, pull-type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pull-type * Bottom: - Adjustable rollers in the lower bed: 2 pcs - Motor: 4.4 kW - 2 types of feed speed Dodpjzr U Dxjfx Aa Isku - Dimensions (L/W/H): 1220x950x1060 mm - Weight: 750 kg ADVANTAGES - German-made - Used thicknesser, very good condition Net price: 12,900 PLN Net price: 3,000 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Maximum height: 3.5 m Power: 1 x 320 W Wind resistance: 50 km/h Dsdpfxezkzc Sj Aa Ieku Mains frequency: 50 Hz