Used 3X Screw Compressor for sale (9,020)

Condition: excellent (used), Year of construction: 2003, S014178 PROD. ATLAS COPCO TYPE GX7 S/N AII629046 YEAR 2003 POWER (kW) 7.5 CAPACITY (m3/min) 1.17 PRESSURE (bar) 10 HOURS (SERVICE/TOTAL) 21268 Bdedpfxjz D Duho Aa Ish FREQUENCY CONVERTER NO BUILT-IN DRYER NO HEAT EXCHANGER NO COOLED (AIR/WATER) AIR WITH TANK YES, 500 L DOCUMENTS YES, available at the service center NEW/USED USED

Condition: used, Year of construction: 1993, feed pressure 8,0 bar liter capacity 2340 l/min Number of working hours 13382 h voltage 400 V total power requirement 15,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,0 x 0,8 x 1,3 m Bdodpfx Aoz Dxn Aea Ish Serial no. 1006 Operating hours run: 26736 Operating hours load: 18261

Condition: excellent (used), Year of construction: 2008, operating hours: 64,878 h, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 231 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Screw compressor GA22VSDFF Integrated inverter and dryer 22 kW Bdedpfx Aajyr Da Rs Ioh 13 bar 3.85 m3/min

Condition: used, Year of construction: 2004, Technical details: feed pressure: 9,75 bar liter capacity: 10,1 l total power requirement: 5,5 kW Bdsdpfx Aeu Szluea Ioh volume capacity: 10,1 m³/min. Number of working hours: 26071 h revolutions per minute of the motor:: 3000 U/min. protection class: CE 0038 machine weight approx.: 310 kg dimensions L x W x H: 1,2 x 0,6 x 1,0 m Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is. *

Condition: excellent (used), ABAC SPINN compressor Air dryer, Tank: 270 liters, Bdodpfx Aaez Epd De Ijh 7.5 kW motor, Pressure: 10 bar, Weight: 250 kg.

Condition: excellent (used), Year of construction: 2020, S016059 PROD. ALUP TYPE SCK30 CE S/N ITJ370650 YEAR 2020 POWER (kW) 22 Bodjz A Tm Dopfx Aa Isdh CAPACITY (m3/min) 3.22 m3/min PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 0 (new controller) INVERTER NO BUILT-IN DRYER NO EXCHANGER NO COOLED (AIR/WATER) AIR ON TANK NO DOCUMENTS YES CONNECTION NEW/USED Used

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: Bsdpfx Ajzu Aiboa Iedh The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 2004, operating hours: 59,690 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 882 m³/h, pressure (max.): 8.75 bar, type of cooling: water, Equipment: refrigerant dryer, type plate available, Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW Bedoyuvwajpfx Aa Iodh 8.75 bar 14.70 m³/min

Condition: excellent (used), Year of construction: 2004, S016550 PROD. RENNER TYPE RSK37 S/N 8470 YEAR 2004 POWER (kW) 37 OUTPUT (m3/min) 6.15 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 7166 / 25832 FREQUENCY CONVERTER no BUILT-IN DRYER yes EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1' Bjdpsz Elfdsfx Aa Iedh NEW/USED USED

Condition: ready for operation (used), Offered are two identical, belt-driven, sound-insulated Alup screw compressors. Power: 7.5kW, operating pressure: 10bar, capacity: 1m³/min, weight: approx. 215kg. An on-site inspection is possible. Bdedpjztrb Dofx Aa Ish

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 YEAR 2014 POWER (kW) 75 Bdodpfx Aaezi Dbhj Ijh CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: excellent (used), Year of construction: 2011, operating hours: 53,132 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,596 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor GA132VSD Atlas Copco Integrated frequency converter 132 kW 8.5 bar 26.06 m³/min Bjdpfx Aasx Rwz To Iodh

Condition: used, Year of construction: 2021, Technical details: feed pressure: 10 bar total power requirement: 7,5 kW volume capacity: 1,1 m³/min. Number of working hours: 0 h revolutions per minute of the motor:: 3000 U/min. voltage: 400 V / Hz rated capacity: 7,5 KW machine weight approx.: 438 kg dimensions L x W x H: 1,0 x 0,55 x 0,85 m SCREW COMPRESSOR WITH ELECTRIC DRIVE Bjdou Nz D Uepfx Aa Iedh with integrated pressure tank - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D. *

Condition: good (used), Code: 0386 Brand: BOTTARINI AIR KRONE - ITALY Model: KS 22 - CE Standard Silenced screw air-compressor with tank and dryer for craft and industry - CE Standard Features: Palletised design, this means that it can be placed anywhere using a simple transpallet. No bolting down is required. Panel-enclosed design that allows for easy access from all sides for routine maintenance Clearly visible and functional control panel features a pressure gauge, air pressure, running time counter, a digital temperature regulator, and a timer. Light on/off button and fault indicator lights Technical data: Bdedpfx Aoy Spkiea Ijh Motor power 20 Hp 10 Bar 2 m³/min Air delivery 70 CFM Vertical tank 500 liters Dryer Overall dimensions Compressor mm 700 x 700 x 1000 h - 210 kg Overall dimensions Dryer mm 500 x 500 x 600 h - Kg 50

Condition: excellent (used), Year of construction: 2015, KAESER SX 8T screw compressor with air dryer, after service. Technical data: Bsdpfoyt H Sfsx Aa Iodh capacity: 0.68 m3/min (680/min); engine power: 5.5 kW; pressure: 11 bar; operating hours: 7890 h; year: 2015. The compressor is in full working order. We provide service support. Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2018, operating hours: 513 h, functionality: fully functional, overall weight: 649 kg, power: 33 kW (44.87 HP), fuel type: diesel, Atlas Copco XAHS 38/XAS88/Compressor/Construction Compressor/12 Bar • Manufacturer: Atlas • Model: Copco XAHS 38/XAS88 • Year of manufacture: 2018 • Operating hours: 513 hours • Power: 33 kW/44 hp • Engine: Kubota 4-cylinder diesel engine • 12 bar • Transport length: 1.94 m Bodjz A Dq Tjpfx Aa Ijdh • Transport width: 1.16 m • Transport height: 1.05 m • Total weight: 649 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Designed to supply oil-free compressed air for low-pressure industrial applications. TECHNICAL DATA Bsdpfx Aozvllnoa Isdh Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Serial number: AIF042384

Condition: ready for operation (used), Year of construction: 2022, Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible. Bedpfx Aezhw Rtsa Iedh

Condition: used, machine/vehicle number: 220.00452, power: 7.5 kW (10.20 HP), Used, functional ALUP compressor stage Air End Tri AG 51-S The stage is used and in working order. Art. No.: 220.00452 Motor: 7.5 kW 3970 rpm 16.5 A Bedpfez Er Edsx Aa Iodh The price is €350 plus VAT. Freight shipping is available for an additional charge.

Condition: used, Year of construction: 2022, feed pressure 10 bar liter capacity 2,71 m³ / min motor speeds: 3000 U/min dimensions 1300 x 1000 x 1900 mm total power requirement 18,5 kW weight of the machine ca. 500 kg Features: - Focus Control 2.0 control system - Network pressure sensor Bdsdjwq Sz Ijpfx Aa Ish - Belt-driven drive system - Soundproofed

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: Impact 20Bar Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Bdjdpfxjy Ecu Uj Aa Ieh Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Bjdpfx Aasy Ecuzj Iedh Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Bjdpfxszfzage Aa Isdh Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes.

Condition: excellent (used), Year of construction: 2012, operating hours: 84,199 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 618 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: type plate available, Screw compressor Atlas Copco GA55VSD. 55 kW, 13 bar, 10.30 m3/min, with integrated frequency inverter. Bedpfx Aajypl U Ds Iedh

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar (also available as a 7.5 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure vessel refrigerant dryer fine filter New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent Bsdpfx Aezpxx Ija Iodh for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)