Used 2004 Makino A66E for sale (1,057)

Condition: used, Year of construction: 2004, Overview  The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative.  Technical data  Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable Hsdpfx Ajm D Ukisicjfk

Condition: new, * IMMEDIATE AVAILABILITY * Including drive-on ramp / mesh extension / lashing rings Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2000 kg • Unladen weight: approx. 450 kg • Payload: approx. 1,550 kg • Internal dimensions: 255 x 145 x 39+53 cm (L x W x H) • Overall exterior dimensions: 395 x 192 x 152 cm (L x W x H) • Loading edge height: approx. 52 cm • Tyres: 13” steel wheels • Brake: yes • Jockey wheel: yes • 100 km/h approval: for additional charge • Including vehicle documents Superstructure: • Floor: Wood, 15 mm phenolic plywood • Sidewalls: Steel • Sidewall height: 39 cm • Chassis: Low-loader, rubber torsion axle • Folding sidewalls: Large drive-on ramp at the rear • Hydraulic system: no • Overrun device & brakes: Knott • Frame/chassis: V-drawbar • Extension: Mesh extension included in price • Locks: Over-centre latch • Lashing eyes: 6 recessed in floor • Supports: available at extra cost • Electrical connector: 13-pin • Registration: ZBII & CoC documents Standard equipment: • Galvanised steel side panels • Rear sidewall foldable • Wooden floor • Corner stanchions with insertion options for extensions or mesh • Maintenance-free rubber suspension axles • Axle with continuous axle body and independent wheel suspension • 6 internal recessed lashing rings in the floor • Rear access ramp • Over-centre latch • Removable mesh extension • Tarpaulin buttons for cargo net or flat cover • Overrun brake by Knott • Automatic reversing system • Sturdy V-drawbar • 13-pin connector • Reversing light • Large dimensioned safety lighting • Integrated rear fog lamp • Rear frame integrated lighting • Registration documents: Vehicle registration certificate (ZBII) & CoC documents Optional accessories - inquire for details: • Perforated railing on sidewall • High front mesh • High cover • Sideboard extension • Spare wheel • Storage box • Rear support legs • Ramps • Flat cover • Additional lashing eyes • Slotted-hole rails for lashing straps & load bars • Rubber-coated lath strips for lashing straps & load bars • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible Hfedpfx Aisyyw Ryscok - All prices include VAT - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export number plates including customs declaration available Descriptions and images are copyright protected! Trailer Centre BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been a specialist dealer & repair workshop for over 30 years for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes and prior sale excepted -

Condition: used, Year of construction: 2004, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Hedpfx Aisu Hza Decjfk Assortment of tools is included in the price Weight: 1400 kg

Condition: used, mileage: 694,262 km, power: 309 kW (420.12 HP), first registration: 11/2004, fuel type: diesel, overall weight: 10,160 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, * Scania P420 LB 4x2 * Refrigerated box body * Thermoking RD-II Max * Diesel and electric aggregate * -25°C * with 2 large and 2 small meat hooks * Front leaf suspension * Rear air suspension * Manual transmission * Air conditioning * VIN: VLUP4X20049094979 * Engine type: DC1214 * Euro 3 * kW: 309 * Displacement: 11,705 cc * Unladen weight: 10,160 kg * Payload: 7,755 kg * Gross vehicle weight: 17,990 kg * Wheelbase: 5,100 mm * Internal box length: 6.15 m * Internal box width: 2.40 m * Internal box height: 2.15 m * Vehicle length: 8,580 mm * Vehicle width: 2,600 mm Hjdpfsn Ryfzex Aicefk * Vehicle height: 3,600 mm * Tyres: 315/70 R 22.5 * Net price * All information is provided without guarantee Tel./WhatsApp:

Condition: used, mileage: 420,145 km, power: 390 kW (530.25 HP), first registration: 12/2004, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: red, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, * MAN TGA 28.530 6x4 rear tipper * Manual transmission * Automatic climate control * Leaf spring suspension at the front * Air suspension at the rear Hedpfx Aoymiqdeicefk * VIN: WMAH29ZZ05M403935 * Engine displacement: 12,816 cc * Euro 3 * kW: 390 * Unladen weight: 13,625 kg * Payload: 14,375 kg * Gross weight: 28,000 kg * Wheelbase: 3,200 / 1,350 mm * Vehicle length: 7,490 mm * Vehicle width: 2,450 mm * Tyres: 385 / 65 R 22.5 * Swedish documents * All specifications without guarantee * Vehicle without VAT Tel./WhatsApp:

Condition: used, mileage: 300,413 km, power: 220 kW (299.12 HP), first registration: 03/2004, overall weight: 18,000 kg, fuel type: diesel, color: grey, axle configuration: 2 axles, gearing type: automatic, emission class: euro3, Equipment: air conditioning, * Volvo FM9 4x2 R 4x2 Hedpfx Aiequ Iqdecefk * Road sweeper * Sweeper engine by Mercedes * Johnston body * Serial No.: 04.01.001 * Model No.: S.7000 * Year of manufacture: 2006 * High-pressure cleaner * 4-cylinder engine * VIN: YV2J4CNA14B366996 * Engine type: D9A * Power: 220 kW * Displacement: 9364 cc * Kerb weight: 13,280 kg * Gross weight: 18,000 kg * Payload: 4,645 kg * Wheelbase: 3,700 mm * Vehicle length: 6,810 mm * Vehicle width: 2,550 mm * Vehicle height: 3,350 mm * Tyres: 315 / 80 R 22.5 * Net price * All information provided without guarantee Tel./WhatsApp:

Condition: used, maximum load weight: 13,770 kg, overall weight: 4,220 kg, axle configuration: 2 axles, first registration: 03/2004, loading space length: 7,000 mm, loading space width: 2,500 mm, * Schwarzmüller PA 2/E * Flatbed trailer * 2-axle * Disc brake system * VIN: VAVHAP2184H192498 * Tare weight: 4220 kg * Payload: 13770 kg * Gross vehicle weight: 17990 kg * Wheelbase: 5115 mm * Body length: 7 m * Body width: 2.50 m * Vehicle length: 8950 mm * Vehicle width: 2550 mm * Vehicle height: 2750 mm * Tires: 385 / 65 R 22.5 * First registration: 22.03.2004 * Price (net) * All information without guarantee. Tel./WhatsApp: Hfjdpfxeta I Sfs Aicek

Condition: used, mileage: 398,464 km, first registration: 07/2004, color: silver, fuel type: diesel, Year of construction: 2004, For sale: a 2004 Mercedes-Benz C-Class, equipped with a dynamic 2148 cm3 diesel engine producing 149 hp. The car is silver and has a mileage of 398,464 km. It has 5 seats and is ideal for both daily use and longer trips. Hjdpfszguxxsx Aicofk Technical data: Year of manufacture: 2004; Engine: 2148 cm3 / 149 hp; Fuel: Diesel; Mileage: 398,464 km Generation: W203 (2000-2007); Manual air conditioning; Heated driver's seat; Electric front windows First registration: 09.07.2004; VIN: WDB2032081F591969 Included in the price are also an extra hood, front fenders (left and right), and a complete front bumper.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Handling Device Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Simar FDX-2 Dye Dosing Unit Drive type: Stepper motor (high rotational speed repeatability) Hjdsy Hldnjpfx Aicjfk Power supply: 230 V / 50 Hz Speed: Continuously adjustable (depending on the control unit, typically 0.1 – 200 rpm) Dye container capacity: approx. 5 liters

Condition: used, Year of construction: 2004, Mazak Multiplex 6300 Mazatrol 640T YOM: 2004-11 Hfedpfxsv Tvkas Aicek approximately 20 pcs tools Mazak Flex-GL200F More information is coming soon.

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Hodpjn Hwl Aefx Aicefk Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei Hedowir Dtjpfx Aicofk 29000 € 553.9 € 2050 mm 4 mm 42 1/min 750 mm 7.5 kW 800 mm 450 mm 2700 mm 2300 mm 1350 mm 2800 kg motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 2004, Pneumatic press for upholstery, Camam brand, year 2004 (CE), used Hfjdpjyccuhsfx Aicsk Dimensions and weight: Cm. 90*60*H 200. Weight 200 kg (1 piece)

Condition: excellent (used), Year of construction: 2017, Schneider Ozga strapping machine for strapping parcels Hsdpfx Aetyytpsicofk

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 4x2000 SMO-2004-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 4.0 mm - Maximum working length: 2000 mm - Cutting angle: 0.5 - 1.5° - Strokes/minute: 6 - 20 - Backgauge retract distance: 600 mm - Motor power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Total mass: 2500.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length Hjdpfx Aoiggf Ijicefk - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m 6 ejection stations total length 12 m Hfodpfxol H E Tao Aicsk The infeed belt is not running at the moment, probably because of the frequency converter.

Condition: good (used), Year of construction: 1992, I sell the automatic optimising saw GreCon Dimter 2004, year 1992. Input table automatic feeding / throughfeed system Outut table 3 pcs. kickers on left outfeed table Hfedpjt Ir Nqsfx Aicok Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Spare parts and Documentation included.

Condition: excellent (used), Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Fischer, Digital Differential Pressure Switch -Article No.: DE45520040PK03MW Hsdpfx Aisghb Ezocjfk -Basic measuring range: 0...4 mbar -P max.: 50 mbar -Operating voltage 24 V DC/AC -Number: 2x pressure switches available -Price: per piece -Cardboard dimensions: 200/160H140 mm -Weight: 0.5 kg/piece

Condition: ready for operation (used), Bosch SD-B4.140.020-04.000, brushless, permanent magnet servo motor, serial number: 946000756, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hsdpfx Aisi D E T Nscofk

Condition: ready for operation (used), Siemens 6FC5203-0AB10-0AA1, serial number ST-LN2004535, has been professionally and completely overhauled and tested, and comes with a 24-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Hfedpfx Aioi Edywocsk

Condition: used, Year of construction: 2023, functionality: unexamined, GEA Hilge MAXA stainless steel centrifugal process pump in excellent condition. Specifications: Manufacturer: GEA Hilge Type: MAXA 200-400 CNY 200/200/55/4 Hsdszrm I Nepfx Aicsfk Year of manufacture: 05/2023 Capacity: 280 m³/h Head: 20 m Motor power: 55 kW Siemens IE3 electric motor Speed: 1,450 rpm Stainless steel pump housing Complete plug-in unit with motor, coupling, and base frame Suitable for the food, beverage, dairy, pharmaceutical, and chemical industries The pump is sold as is, where is, without any warranty. Delivery: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, Year of construction: 2020, functionality: unexamined, GEA Hilge MAXA stainless steel centrifugal pump in excellent industrial condition. Specifications: Manufacturer: GEA Hilge Type: MAXA 200-400 CNY 200/200/55/4 Year of manufacture: 2020 Capacity: 280 m³/h Head: 20 m Pump power: 55 kW Siemens IE3 electric motor Speed: 1,450 rpm Stainless steel pump housing Complete with motor, coupling, and base frame Ready for installation Hfodpfx Aozrm H Eeicek The pump is sold as is, where is, without any warranty. Delivery terms: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, functionality: fully functional, Complete screw conveyor made of stainless steel. Diameter: ø200mm Length: 4,800mm Hodpszp U Acjfx Aicefk Manufacturer: DTS

Condition: reconditioned (used), overall weight: 30 kg, chuck outer diameter: 200 mm, three-jaw chuck diameter: 200 mm, short taper mount: 6 mm, through hole: 45 mm, Three-jaw power chuck without step-jaw cheeks Manufacturer FORKARDT KTNCV 200-45, Three-jaw power chuck; the listed price applies to 1 three-jaw chuck. ----- Jaw stroke is achieved via clamping cylinder and draw tube. Chuck No. 1485270 with through-hole clamping. ----- Required cylindrical flange mounting according to DIN 55027 Short taper, taper size: KK6 ----- Three-jaw power chuck with quick-change system also suitable for reversible base jaws, type: FGB 200 ----- Jaw interface: Base jaw type: helical gear; Designation → Size: FGB200, SGB200 Hjdpfx Aijzrmzpjcjfk ----- Draw tube connection M52 x 2 mm Cylindrical mounting for spindle flange ø 170 x 6 mm Mounting hole circle for 3x cap screws approx. 135 mm ----- The chuck is in like-new condition. Weight without clamping jaws approx. 25 kg ----- Delivery without base and top jaws *We are available for any questions. *Shipping costs abroad upon request.

Condition: ready for operation (used), Heidenhain AE LB 382C scanning head. 315420-04, serial number 59 151 559V, used, in good condition, in original packaging, 100% functional. Scope of delivery as shown in the photos. Hsdszm D Ddopfx Aicjfk