Used Walther Vibrator 4 Tubs for sale (59,690)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg Gjdpfx Aod Tqalei Neuc - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth Guedofdkb Ujpfx Ai Nsc - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm Godpfx Aijguk A Hs Neuc - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable Gjdpfefdkbhex Ai Nouc - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm Guodjguk Dkopfx Ai Njc 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Gjdpjguk Dvofx Ai Njuc - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Godpfxjtp I S Aj Ai Nouc

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Technical data: - Cutting length: 2800 mm - Cutting width: 1300 mm - Cutting height: 155 mm - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW Guodpfx Aey Rp D Toi Nsc - Year of construction: 2025 Duplex mitre fence

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement. Gedpfxsy Ehnao Ai Nouc

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Guodpfx Aijy Ehk Is Njc Full documentation. Extensive set of accessories.

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads Gjdpol Dw Nxjfx Ai Nouc long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: new, Year of construction: 2026, Machine type: EVT 400 Manufacturer: ERBA Power kW: 4.0 Guodpjyq N D Ejfx Ai Noc Total volume: 400 liters Description: The EVT 400 long trough vibratory finishing machine from ERBA features a robust, hot-cast polyurethane lining. Discharge or separation is carried out via a bottom drain (manual/pneumatic). Removable dividers allow the work tank to be partitioned into compartments for individual processing of parts. The machine is equipped with an electrical control cabinet and can be optionally fitted with a fully automatic PLC process control system. Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted via frequency inverter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net, plus the currently applicable statutory VAT and freight costs. The photos may show the system including accessories, which are optionally available and subject to additional costs. The quoted price refers to the base machine. The photos are for illustration purposes only. The actual appearance and dimensions may differ from those shown. If you are interested, we look forward to your inquiry. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely to present our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging platform). The first step will be to send you a non-binding offer, which will also include information about our general terms and conditions, legal notice, and right of withdrawal before a purchase/contract is concluded.

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists Guodpfx Aijxwnw Ae Njc The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES.

Condition: used, machine/vehicle number: 2502, DESCRIPTION Dividing head make Walter Type HT 200 U Tip height 200 mm Recording SK 50 Spindle diameter 130 mm Weight 260 kg Space required: T. 500 x B. 650 x H. 450 mm Gedpoc Tuyrsfx Ai Nouc DMT0Z2OCZN9

Condition: used, Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant Gsdpfx Aiorxw E Es Nsuc -Manufacturer: Walther Trowal, drying granulate type GM -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 72 kg

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type MAC 10x15 A/C TRI -Grain: see photos Gsdpfxjrxw Eze Ai Nouc -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 471 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Type: Industrial platform staircase / work platform Material: Steel Number of levels: 4 Total height: approx. 8.35 meters Landing heights: 1st level: approx. 1.81 m 2nd level: approx. 3.60 m Gsdpsyf Un Sofx Ai Njuc 3rd level: approx. 5.40 m 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Safety features: railings around the platforms

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 22,800 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 22,800 mm, 4 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep, Each with 2 bays, 2.7 m wide, Each with 3 beam levels, shelf load capacity 3000 kg. - 12 frames (RM3511 - RAL5019) Gedpoyz Iccofx Ai Neuc - 24 base plates, shim material, fastening material - 48 floor anchors (ZZBA1210) - 48 single beams (T2711 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivered free to site/installation location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Deliveries available throughout the Federal Republic of Germany (except islands); deliveries to EU countries upon individual agreement.

Condition: used, Year of construction: 1993, 1500 mm Godoxq Hg Ajpfx Ai Nouc tank diameter / tank height 1500 / 500 mm turning speed range 1500 U/min voltage 380 V volumn 300 Liter power requirement 18 kW weight of the machine ca. 1,2 t dimensions 1,5 x 1,6 x 1,6 m Vibration dryer See ??pictures

Condition: used, Year of construction: 1980, 1250 mm tank diameter / tank height 1000 / 350 mm turning speed range 920 / 1415 U/min Gsdpfsxq Hgvox Ai Neuc voltage 380 V power requirement 1,9 kW volumn 125 Liter weight of the machine ca. 600 kg dimensions 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images

Condition: excellent (used), Year of construction: 1991, Hydraulic press Walther WUP Table: 1000 x 450 mm Stroke: 350 mm Max. adjustable table height: 800 mm Guodpeyvy Nkjfx Ai Nsc Pressure: 60 t

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 440 mm, rapid traverse X-axis: 400 m/min, rotational speed (min.): 2,500 rpm, controller manufacturer: HEIDENHAIN TNC 123, The machine is in very good condition. Immediately ready for use. Gedpfx Aioyxpraj Neuc

Condition: new, Year of construction: 2020, Model KPZ-2 Type Closed Working dimensions 900 w. x 1300 h. x 900 d. External dimensions 980 w. x 2100 h. x 1600 d. Operation Electric Power 0,69 kW x 2 Voltage 380 V Frequency 50-60 Hz Filter Polyester Number of filters 3 Filter surface 22,5 m² Fan aluminium Fan 74 dBa Air consumption 10,200m ³/h Warranty 12 months Other models KPZ-4 / 6 / 8 / ... on request Gusdpfx Aeb Al Sbei Nec

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, Gjdjv Ukz Aspfx Ai Njuc each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Gsdpfx Ajyr Nd Usi Nouc