Used Vdl Citea Sle-120/310 for sale (11,840)

Condition: used, Faro Focus 3D 120 Laser Scanner, In Flight Case with 3 x Batteries and Charger, SD Card and USB Stick, Safety Glasses, Power Leads, 2 x Flight Cases with 10 Reference, Spheres and 8 Mounted Base Plates, Quick Start Guide Manual. S/No. LLS061101008 Iedpoy Idlgjfx Amiotg Please Note: This lot is located in Birmingham, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, This item is unused and in the original packaging We have a quantity available The InPro 3253SG 120/PT1000 is an in-line industrial pH electrode (probe) intended for continuous process measurement rather than simple lab spot checks. It integrates both the pH sensing element and temperature compensation in a single unit, allowing accurate, real-time pH measurement in process lines, tanks, fermenters and reactors Iedpfx Amsy Iw Etjiotg Physical & Mechanical - Sensor shaft length: ~120 mm — relatively short, good for installations with limited insertion depth. - Process connection: Pg 13.5 threaded connection. - Connector type: VP industrial connector for secure integration. - Pressure rating: Up to ~4 bar gauge. Temperature & Compensation - Built-in PT1000 temperature sensor — provides temperature compensation for accurate pH reading. - Operating range: ~0 °C to ~100 °C. Sensing & Reference System - Glass pH sensing membrane with a pre-pressurized liquid electrolyte system — lowers maintenance and improves stability. - Ceramic diaphragm — stable reference junction. - Argenthal silver-ion trap cartridge — improves reference performance, especially in environments containing sulfides. - Sterilisation & Hygiene - Sterilisable/autoclavable — built to withstand repeated steam sterilization or autoclave cycles without losing calibration or performance. Certifications & Approvals - Typically supplied with industrial and safety certifications (e.g., ATEX, IECEx and CE) for use in hazardous zones and hygienic processing. pH Range - Suitable for pH measurement typically within 0 to 12 (depending on membrane type). Summary In essence, the Mettler Toledo InPro 3253/120/PT1000 is a high-performance industrial pH electrode designed for robust, low-maintenance in-line monitoring with integrated temperature compensation, suitable for sterilizable and process‐critical environments. Its pre-pressurized reference and rugged build help deliver stable pH measurements in demanding applications.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Itsdpfx Aeygkuwsmisg Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2011, Load moving system CBM 240 / ST 120 MACH-ID 923 Itsdpfxowvhrtj Amieg Type: CBM 240 / ST 120 Year: 2011

Condition: excellent (used), Year of construction: 1994, center height: 100 mm, grinding length: 380 mm, total width: 1,500 mm, total length: 1,300 mm, total height: 1,350 mm, grinding diameter: 200 mm, spindle speed (max.): 1,800 rpm, overall weight: 2,100 kg, pivoting range: 10 °, Centre height: 100mm Grinding Ø: 200mm Grinding length: 380mm Iodjyu Nqgspfx Amijtg Grinding stone dimensions:300 x 50 x 127mm Grinding stone speeds: 1800Rpm Table inclasement: 10° Tailstock: 4Mk Length: 1300mm Width: 1500mm Height: 1350mm Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Itedpfx Ameyu Nb Eeiog Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Condition: excellent (used), Year of construction: 2006, pipe diameter (max.): 120 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 6 mm, bending radius (max.): 200 mm, bending radius (min.): 10 mm, overall weight: 12,500 kg, total length: 5,000 mm, total width: 2,200 mm, power: 12 kW (16.32 HP), Tube bending machine MEWAG - RB 120 A-Digi MACH-ID 9605 Make: MEWAG Type: RB 120 A-Digi Year: 2006 Max.Tube Ø: 120mm Min. Tube Ø: 10mm Max. Wall thickness:6mm Max. Bending radius:200mm Min. Bending radius:10mm Isdpfx Ajy E Hu Ejmietg Max. bending length:3000mm 3e dimsion bending:yesmm/min. Power: 12kW Number of tools: 8 Length: 5000mm Width: 2200mm Height: 1mm Weight: 12500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), mileage: 745,372 km, power: 346 kW (470.43 HP), first registration: 03/2018, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 6x2, wheelbase: 6,570 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, number of seats: 2, total length: 9,120 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, parking air conditioner, power mirror, soot filter, spoiler, trailer coupling, General information Cab: Globetrotter Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Transmission Transmission: Volvo i Shift, 12 gears, Automatic Axle configuration Make axles: Volvo Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle 1: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tyre size: 385 / 65 / R22.5; Lift axle; Max. axle load: 7500 kg; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Weights Empty weight: 13.000 kg Carrying capacity: 15.000 kg GVW: 28.000 kg Functional Crane: VDL S-25-6600, year of manufacture 2018, behind the cab Interior Interior: grey Environment Emission class: Euro 6c Maintenance APK (MOT): tested until 09/2026 Condition Technical condition: good Visual appearance: good Number of keys: 3 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Coupling - Heavy duty engine brake - Low-noise - Particulate filter - Power take-off (PTO) - Radio - Radio, MP3 enabled - Refrigirator - Remote central locking - Reversing camera - Side skirts - Speed limiter - Spoilers - Spotlights - Stability control - stand airco - Toolbox - Visor - Webasto Itodpfx Amoy Sz Adjisg

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 420 h, load capacity: 1,200 kg, lifting height: 3,300 mm, free lift: 1,630 mm, fuel type: electric, mast type: duplex, construction height: 2,143 mm, fork length: 1,150 mm, empty load weight: 950 kg, total length: 760 mm, drive type: Elektro, construction width: 770 mm, High-lift pallet truck Load centre: 600 mm Mast type: Duplex Technical condition: very good Front tyres type: Polyurethane Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 24V Battery capacity: 300Ah Battery year of manufacture: 2026 Description: Factory-refurbished used unit by Toyota, including new inspection and new certification according to FEM (formerly UVV). Impulse control, initial lift, full free lift, CE certificate. Iodpfxjy Tcz Ro Amiotg

Condition: excellent (used), Year of construction: 2013, 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Junior 102 SC EG Steam output: 120 kg/h Max. thermal output: 79 kW Operating overpressure: 10 bar Water content: 9.5 l Test pressure: 57 bar CE mark: CE 0035 Itjdpfxjyfg Hto Amieg Year of manufacture: 2013 Equipped with Certuss gas burner, gas control section, control cabinet mounted on boiler body, and existing coarse and fine fittings With feedwater module mounted on base frame consisting of: control cabinet, stainless steel feedwater tank, steam dryer, dosing vessel, Speck feedwater pump and sample water cooler

Condition: good (used), mileage: 135,075 km, power: 88 kW (119.65 HP), first registration: 03/2022, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,400 mm, total width: 1,960 mm, total height: 2,150 mm, loading space length: 2,510 mm, loading space width: 1,660 mm, loading space height: 1,390 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional options and accessories = - Halogen lamp - Incl. ladder roller and steps - Manual - Radio/cassette - Fabric upholstery - Partition wall = Notes = Configuration: 4x2, Unladen weight: 1859 kg, Gross vehicle weight: 3050 kg, Cab type: single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: none, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Color: white, Lighting type: halogen lamp, Bluetooth, Engine power: 88 kW (118 HP), Fuel: diesel, Euro standard: 6, Drive system: timing chain, Transmission: manual, Gears: 6, Power steering, ABS, ASR (traction control), Starter battery, Body type: raised, additionally extended, side walls lined, Roof rack: incl. ladder roller and steps, Side doors: 1, Rear access: double doors, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat cover: fabric, Seat adjustment: manual, long wheelbase, air conditioning, roof rack, steps, Spare wheel, Tire type: summer tires = Further information = General information Number of doors: 1 Registration number: KLEYN1 Axle configuration Tire size: 205/65R16 Brakes: disc brakes Suspension: coil spring Axle 1: Tread depth left: 7 mm; Tread depth right: 7 mm Axle 2: Tread depth left: 7 mm; Tread depth right: 5 mm Weights Curb weight: 1,859 kg Payload: 1,191 kg Gross vehicle weight: 3,050 kg Functional Loading platform height: 55 cm Maintenance APK (general inspection): valid until 03/2027 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Itsdpsy Iwawjfx Amiog Financial information Lease price: €260 per month (commercial van, 72 months); Please ask for further information and terms

Condition: used, Year of construction: 1981, total length: 3,750 mm, total width: 2,250 mm, total height: 1,700 mm, Colour: Grey Weight: 5.500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: B5896 - Drive system: Conventional Iedpfeyf Hhwjx Amijtg - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge depth [mm]: 1100 - Transport dimensions: 3750mm x 2250mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, Manufacturer: Safan Type: VS 310-10 Cutting width: 3100mm Max. Thickness: 10mm Motor-power: 15kW Machine indicated cutting line, but is without backgauge. - Year: 1989 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ijdpfewnhivsx Amistg Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2006, operating hours: 7,341 h, condition: used, lifting height: 3,700 mm, free lift: 1,500 mm, mast type: duplex, construction height: 3,250 mm, fork length: 1,200 mm, drive type: Diesel, load capacity: 12,000 kg, Compact forklift truck - Diesel Load center: 600 Mast type: Duplex Technical condition: good Front tires type: Bandages Front tires Condition: 80 - 100% Rear tires Type: Bandages Rear tires Condition: 80 - 100% Itjdpfeunnp Hjx Amijg Sideshift, fork positioner, 3rd valve, 4th valve, full cab, full free lift,

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. Isdpfxedzqn Ue Amijtg 1 aftercooler, type WFN009 DHH16 Volumetric flow rate of air (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded connection (air): G 2" Threaded connection (water): G 3/4" Weight of the aftercooler: 11 kg Dimensions of the aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Volumetric flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 1706J-E93TAG2, General information Field of application: Construction Weights Empty weight: 4.103 kg Functional Generator capacity: 310 kVA Dimensions of cargo space: 409 x 151 x 228 cm Itedpfxex S Um Nj Amieg Other information Fuel consumption: 46.9 Liter / Hour at 75% Load Generator: FG WILSON LL5114N Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, mileage: 314,045 km, power: 55 kW (74.78 HP), first registration: 03/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,730 mm, fuel: diesel, CO₂ emissions: 133 g/km, fuel tank capacity: 60 l, color: black, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,380 mm, total width: 1,810 mm, total height: 1,860 mm, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, electric window regulation, full service history, General information Number of doors: 4 Model range: Mar 2012 - May 2015 Cab: single Technical information Torque: 185 Nm Number of cylinders: 4 Engine capacity: 1.560 cc Acceleration (0-100 kph): 16,6 s Top speed: 150 km/h Weights Empty weight: 1.350 kg Carrying capacity: 585 kg GVW: 1.935 kg Interior Iodoy Skziopfx Amiotg Interior: black Consumption Average fuel consumption: 5,1 l/100km (55 MPG) Urban fuel consumption: 5,9 l/100km (48 MPG) Extra urban fuel consumption: 4,7 l/100km (60 MPG) Condition Number of keys: 2 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Driver's airbag - Electrically operated front windows - Immobiliser - Partition - Remote central locking

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - └ Type Documentation: Technical data, Electrical diagrams, User manual, Operating system - └ Language: NL - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: Itsdpfjx Ei Syex Amiog - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2021, operating hours: 240 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.550 kg Mast: articulated arm Lifting capacity: 200 kg Itedjxhbrzepfx Amieg Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, mileage: 372,551 km, power: 70 kW (95.17 HP), first registration: 06/2014, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,320 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, total length: 7,100 mm, total width: 1,990 mm, total height: 2,730 mm, loading space length: 4,120 mm, loading space width: 1,770 mm, loading space height: 1,940 mm, Year of construction: 2014, Equipment: ABS, Bluetooth, central locking, electric window regulation, power mirror, traction control, = Additional options and equipment = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rearview camera - Fabric upholstery = Remarks = Configuration: 4x2, Payload: 1272 kg, Unladen weight: 2228 kg, Gross weight: 3500 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (central axle): 2000 kg, Cab type: single cab, Number of airbags: 1, Parking assistance: none, Electric windows, Electric mirrors, Radio/cassette, Color: white, Heated mirrors, Rearview camera, Lighting type: halogen lamp, Bluetooth, Engine power: 70 kW (94 HP), Fuel: diesel, Euro standard: 5, Drive technology: timing chain, Transmission: automatic, Power steering, ABS, ASR, starter battery, Body type: additionally raised and extended, Rear step, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Seats: 2, Seat arrangement: 1+1, Seat upholstery: fabric, Seat adjustment: manual, L3H2 Maxi Post NL Conversion Automatic Euro5 95 HP!, Spare wheel, Spare wheel tread: 4%, Tire type: summer tires = Further information = Itodpfxeyx Tz So Amijg General information Number of doors: 1 Registration number: VJ-862-P Axle configuration Tire size: 235/65R16 Brakes: disc brakes Suspension: leaf spring suspension Axle 1: tire tread left: 1 mm; tire tread right: 2 mm Axle 2: tire tread left: 4 mm; tire tread right: 4 mm Weights Unladen weight: 2,228 kg Load capacity: 1,272 kg Gross vehicle weight: 3,500 kg Operational Loading floor height: 68 cm Maintenance MOT (General Technical Inspection): valid until 08.2026 Condition General condition: average Technical condition: average Visual condition: average Damages: none Number of keys: 2

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Itjdpow A Af Ijfx Amieg Good condition

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal rods, steel beams, wooden strips, and sheet material. With a total length of approx. 13.20 meters, a height of approx. 4.00 meters, and cantilever arms measuring approx. 120 cm, this long goods rack offers high storage capacity across 4 storage levels (base plus 3 levels). Each cantilever arm supports up to 500 kg, while each upright is loadable up to 2,250 kg. The cantilever arms are bolted and can be flexibly adjusted in height at 200 mm increments. The fully hot-dip galvanized material provides long-lasting protection for indoor and outdoor use – new goods in stock at Wietmarschen. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total rack row length: approx. 13.20 m - Total height: approx. 400 cm Ijdey S Ucqjpfx Amistg - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing (distance between uprights): approx. 131 cm - Levels: base level + 3 storage levels - Load capacity per arm: max. 500 kg (with even load distribution) - Load capacity per upright: max. 2,250 kg (with even load distribution) - Upright profile: IPE 160, approx. 400 cm, incl. base plate - Upright hole pitch: approx. 20 cm - First hole above base: approx. 107.5 cm (top of base) - Highest hole pair: approx. 50 cm below upright head (top of head) - Design: single-sided, arms bolted - Surface: fully hot-dip galvanized - Availability: new / 2nd choice (returns) available from Wietmarschen stock SCOPE OF DELIVERY: - 11 uprights, approx. 400 cm, made from IPE 160, incl. base, hole pattern 20 cm - 33 cantilever arms, approx. 120 cm, made from IPE 80 (without deflectors) - Incl. all connecting elements - Incl. all necessary bolts - 1 load capacity label Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery throughout Germany via our partner freight company – shipping costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 conducted by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also available PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer tailored to your specific requirements. Whether new construction, modification, or expansion – we offer professional advice on your racking configuration. Haven't found the right solution yet? Visit our website – here you will find a quick overview of various offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You can find our phone number on our company page. We are available to take your calls Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and phone number, and we will get back to you as soon as possible.

Condition: good (used), mileage: 620,960 km, power: 427 kW (580.56 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x4, wheelbase: 3,300 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 7,050 mm, total width: 2,550 mm, total height: 3,920 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, - 2nd diesel tank - Heated mirrors - Digital tachograph - Tachograph (control device) - Halogen lamp - Manual - Radio/cassette - Sliding fifth wheel - Sleeper cab - Lane keeping assist - Fabric upholstery - Additional braking system Number of axles: 3, Configuration: 6x4, Unladen weight: 10,530 kg, Gross weight: 26,000 kg, Total tank capacity: 990 liters, 2nd diesel tank, Fifth wheel height: 129 cm, Fifth wheel type: sliding, Number of differential locks: 2, Suspension type: air suspension, Cab type: sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: white, Heated mirrors, Lighting type: halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Flashing lights, Engine power: 427 kW (573 hp), Fuel: diesel, Euro 6, Transmission type: AS-Tronic, Gearbox brand: ZF, Gears: 12, Additional braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Starter battery, Central locking, Seating arrangement: 1+1, Seat cover: fabric, Seat adjustment: manual, D38 // 120 TON // 6X4 // INTARDER Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Brakes: disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Left tire tread: 9 mm; Right tire tread: 12 mm; Suspension: leaf spring Axle 2: Tire size: 315/70R22.5; Twin tires; Left inner tread: 10 mm; Left outer tread: 10 mm; Right inner tread: 10 mm; Right outer tread: 10 mm; Suspension: air suspension Axle 3: Tire size: 315/70R22.5; Twin tires; Left inner tread: 10 mm; Left outer tread: 10 mm; Right inner tread: 10 mm; Right outer tread: 10 mm; Suspension: air suspension Weights Empty weight: 10,530 kg Payload: 15,470 kg gross vehicle weight (GVW): 26,000 kg Maintenance APK (Main Technical Inspection): valid until 07.2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 3 Financial information Leasing price: €880 per month (default, 60 months); Ask for further details and conditions. Itodpfx Asy Ibppjmisg Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good prices • Fair and transparent business practices • Multilingual staff • We understand our customers • Support for import and transport • (Export) license plates arranged quickly • Expert technical services • Security of “recognizable quality” • And more… Please visit our website for special offers and full stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask us directly…

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, Used shredding mill Manufacturer: AVIAN Type: AG 80/120 7-3 Rotor diameter: 800 mm Width: 1,200 mm Itedoy Szcdjpfx Amiog Infeed: 1,200 x 940 mm Rotor knives: 7 x 2 Stator knives: 3 (with deflector wedge) Cutting geometry: Double-angled cut Drive power: 132 kW Condition: fully overhauled Electrical control cabinet includes, without connection cables to the mill, the control for: Shredding mill 132 kW, Blower 11.0 kW Blower for fine material: 2.2 kW Conveyor belt: 1.5 kW Conveyor belt control, load-dependent

Condition: used, LEISTRITZ RR 120 BHF is a Thread rolling machine of precision, delivering high accuracy and reliable operation. Capacities: threaded Ø 2–50 mm; pitch 0.35–3 mm; max infeed 85 mm; max stroke 125 mm; min roll die Ø 120 mm; roll width 90 mm; roll axis swivel 8°. Specs: roll speeds 30–150 t/min (stepless); roller pressure infinitely adjustable 12 to; voltage 50 Hz 3x400 V; motor power 7.5 kW; connection power 8 kW; weight ≈2000 kg; dims L1440×W1260×H1805 mm. Achieves tight tolerances; applications: automotive, watchmaking, machine tools, aerospace, medical. Isdpjy S Ddqofx Amietg