Used Unbekannt Trägerabstand 5860 Mm Höhe 850 Bis 1255 Mm for sale (77,005)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Lsdpfx Aomhh Dtsbyshn Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 90 mm -Admission: -Drawing: in the photos -Dimensions: 140/135/H160 mm -Weight: 4.7 kg Lhodsd Efz Sjpfx Abyjn

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 120 mm Lhedpfx Abjd Ebpkoyen -Admission: -Drawing: in the photos -Dimensions: 200/70/H130 mm -Weight: 4 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing attachment Lheded N Uyrjpfx Abysn -Tip height: 110 mm -Drawing: in the photos -Dimensions: 180/95/145 mm -Weight: 4.2 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment Ljdpfx Asd Nn Ifobyohn -Tip height: 185 mm -Dimensions: 235/120/H170 mm -Weight: 32 kg

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Lhodpfxsmhhypo Abysn - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: used, Tailstock, counter bearing for dividing head, dividing head Lsdpfxed Tx E Ds Abyshn -Tip height: 125 mm -Design: Angle adjustment -Tip mount: MK2 -Dimensions: 260/114/H145mm -Weight: 10kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Ledpfx Abozr Hlzjyohn -Punching tool: Gill tool, notching die for profile steel shears, flat steel shears -Dimensions: see photos -Dimensions: Die 240/90/H125 mm / Punch 200/85/H170 mm -Weight: 33.9 kg

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Piston diameter: Ø 63 mm -Stroke: 110 mm -Pressure force: 20 t -Overall dimensions: 1990/4025/H1920 mm -Weight: 5060 kg Lodpfxezakf Ns Abyshn

Condition: good (used), The scope of delivery includes: 1x Sigma profile, used Lsdpfohktdlsx Abyohn Material color: galvanized Overall length: approx. 850 - 1,050 mm Profile: CS300 The Sigma profiles have been cut on one or both sides! There are different lengths and material thicknesses available, which will not be sorted. General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 50 x 50 mm profile dim. outside: U: approx. 40 x 40 mm material thickness: approx. 5,00 mm base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Mr.: Andre Evering Lhedpon R Egzjfx Abysn Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment Lhsded N Hy Uspfx Abyjn -Top height: 300 mm -Recording: MK2 -Drawing: in the photos -Dimensions: 450/120/H330 mm -Weight: 21 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head -Peak height: 120 mm -Height: adjustable -Recording: MK2 -Drawing with the photos Lhsdpfx Abeb Hbxdsyjn -Dimensions: 170/100/H130 mm -Weight: 6.4 kg

Condition: used, Conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, belt belt, flat belt, drive belt -Width: 85 mm -Length: 14850 mm -Transport dimensions: 455/455/H85 mm Lodpfx Abof Ry R Dsyohn -Weight: 19 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Ledjd N Apqopfx Abyshn -Tip height: 110 mm -Dimensions: 218/117/H190 mm -Weight: 11 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Ljdpfjd N Aprex Abyjhn -Tip height: 101 mm -Dimensions: 85/123/H118 mm -Weight: 4.5 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Lhsdezr Hlnjpfx Abyon -Punching tool: for profile steel shears, flat steel shears, 2 pieces -Hole spacing: 135 x Ø17 mm -Dimensions: see photos -Submission/Price: complete -Dimensions each: 175/107/H125 mm -Weight: 6.1 kg/pc.

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 99 mm Lhjdpfx Aed N Appsbyen -Dimensions: 180/92/H144 mm -Weight: 4 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Ljdpfsd N Apnox Abyshn -Tip height: 155 mm -Dimensions: 100/120/H182 mm -Weight: 5.5 kg

Condition: ready for operation (used), Transroll spindle L = 1110 mm , Ø thread: 40 mm, pitch: 6 mm, Ø journal: 22 mm, Ø shaft: 30 mm, length shaft: 95 mm , Ø ball cage: 63 mm , Ø flange: 87 mm ,used, normal signs of wear, 100% functional, scope of delivery as per photos Ljdpjz Ac U Tsfx Abyehn

Condition: ready for operation (used), Transroll spindle L = 875 mm from Studer S60 adjustment range: 570 mm, Ø 63 mm, pitch: 5 mm, Ø ball cage: 90 mm, Ø mounting flange: 125 mm, Ø pin: 30/40 mm, Ø pin thread: 40 mm, used, normal signs of wear, 100% functional Lsdpfx Asz Adawebyohn

Condition: ready for operation (used), Transroll spindle L = 1615 mm, Ø thread: 40 mm, pitch: 12 mm, Ø pin: 30 / 35 mm, length pin: 135 mm, Ø shaft: 35 / 40 mm, length shaft: 120 mm, Ø ball cage: 70 mm, dimensions flange: 85 x 110 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Lhsdez Adakopfx Abyen

Condition: ready for operation (used), Transroll spindle L = 680 mm, Ø thread: 25 mm, pitch: 10 mm, Ø shaft: 20 mm, length shaft: 105 mm, Ø ball cage: 43 mm, flange: 45 x 66 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Ljdpfxoz Adaqj Abyohn

Condition: excellent (used), Tool holder, milling holder, milling tool, milling mandrel -Milling tool holder: SK40 tool holders -Cutter holder: Ø 6 mm -Number: 35 milling tool holders available -Price: per piece -Dimensions: Ø 64 / 120 mm -Weight: 0.9 kg Lhsdpfx Aoy Tlc Rebyjn

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Lsdpfx Ajzav Hrjbyohn -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm -Dimensions: see photos -Number: 4x mounting brackets available -Price: per piece -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece