Used System 3R 3R-901-20 for sale (59,721)

Condition: new, Year of construction: 2026, Are you looking for a professional storage solution for industry, commerce, agriculture, photovoltaic systems, or emergency power supply? With the APS 2000 kWh - 4000 kWh battery storage system, Albari Power Systems GmbH offers a high-quality and scalable energy storage system for demanding applications. Technical Data * Storage capacity: 3 MWh or 4 MWh per container * AC power: 1.5 MW or 2 MW * Lithium iron phosphate technology (LFP) * High-quality cell, cell module, and BMS technology based on CATL components * Integrated power electronics for industrial and utility applications * Liquid cooling and air conditioning system for continuous operation * Integrated protection and safety systems * Grid-parallel operation, island operation, and hybrid operation possible * Expandable to storage farms with several MWh up to the double-digit MWh range Dodogu Rukspfx Ahgsci Typical Applications * Self-consumption optimization * Peak shaving (load peak reduction) * Electricity cost reduction * PV surplus storage * Grid stabilization * Load shifting * Curtailment reduction * Feed-in optimization * Black start capable energy systems * Emergency and backup power supply * Hybrid solutions with PV, BESS, and generators Optionally available * APS Energy Management System (EMS) * Grid-parallel operation * Island operation * Black start concepts * Integration of PV systems * Integration of diesel generators * Integration of CHP systems * Integration of charging infrastructure/charging stations * Energy flow optimization * Remote monitoring and energy management * Multi-container systems with several MWh total capacity Your Advantages ✓ High safety through LFP cell technology ✓ High-quality CATL technology for cells, cell modules, and BMS ✓ Very high cycle life (≥ 8,000 cycles) ✓ German EMS with high safety standards ✓ German system design by Albari Power Systems ✓ German system integration by Albari Power Systems ✓ Multi-level safety and fire protection concept ✓ Grid-parallel, island, and hybrid operation ✓ Scalable from a single container to a large storage farm ✓ Individual project planning and commissioning ✓ Service and support Turn-Key Solutions from a Single Source Albari Power Systems supports you from the initial project idea to the finished commissioning: * Project analysis and economic evaluation * Storage sizing * EMS configuration * Grid and protection concepts * Engineering * Commissioning * Service and maintenance Designed in Germany The APS large storage containers are designed and engineered in Germany. Architecture, safety concepts, EMS logic, and integration strategies are developed according to European standards and industrial quality standards. We would be happy to create an individual concept for your project. Albari Power Systems GmbH 21376 Salzhausen Price on request according to project configuration

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization Dodpfxsxt Dk Re Ahgeci - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: like new (used), Year of construction: 2017, The cartons are removed from the shingle stream of the folding box machine, stacked by hand and pushed onto the transit infeed conveyor of the US-2000 TRC 900. In the system, the stack is aligned, pressed and banded three times using side guides and a front stop. For the second banding, the front stop automatically moves to the next position, which was set via the display. position set via the display. A servo band motor enables individual band tensioning for edge-protecting banding of high-quality cardboard stacks. Cycle output up to 22 stacks/min. Dcedovcyw Aepfx Ahgoi

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm Dcjdowrp Hkepfx Ahgoi The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free.

Condition: used, This listing is for a Applied Biosystems API 2000 MDS SCIEX LC/MS/MS This system was previosly paired with the Shimadzu SIL-HIT HPLC system. It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Dcodpfxjxzhpme Ahgoi Equipment can be serviced/renovated/refurbished on request at extra cost.

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible Djdpfsnh R Ekox Ahgjci - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2300 mm Dcodpfxjvz Hhxj Ahgei Weight 650 kg Total power requirement 1,05 kw

Condition: used, Year of construction: 2004, Force Presscylinder: 4000 KN Steel, Gush: 4-6 to/h Aluminium: 3-4 to/h Driving Power: 1x22 kW Arrangement Surface 7x4, 2x4, 1 mxm Machnie weight: 23 to Djdpfx Ahelhqc Negoci Place: Austria Available immediately

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Dcjdpfswt R Dmox Ahgei

Condition: used, Year of construction: 2014, functionality: limited functionality, travel distance X-axis: 3,048 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 300 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 15 m/min, spindle speed (min.): 3,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 12,000 W, We are offering this used Buth Graviersysteme PRO 2030 ATC CNC milling machine, year of manufacture 2014. Manufacturer: Buth Graviersysteme GmbH & Co. KG Model: PRO 2030 ATC Serial number: 150622 Year of manufacture: 2014 Condition: used Electrical connection voltage: 380–400 V Electrical connection frequency: 50 Hz Technical specifications: - Working area: 3048 x 2032 x 300 mm (X x Y x Z) - Table: Phenolic vacuum high-pressure table - Feed rate: 35 m/min (X/Y), 15 m/min (Z) - Drives: 850W YASKAWA AC servomotors - Resolution: 0.001 mm, repeatability: 0.01 mm - Data formats: HPGL – 3D / G-code - Spindle: 12 kW HSD, 8-position carousel tool changer - Speed: 3,000 – 24,000 rpm - Tool holder: HSK63 / ER40 / 26 mm - Weight: approx. 4,500 kg - Control: Fagor 8055 plus CNC controller - Connections: 380/415 V / 50 Hz Equipment & accessories: - Robust steel base frame - Precision ball screws on all axes (X axis with dual drive) - High-precision linear guides - Protective covers for drive axes - Extraction hood for chip extraction - Automatic mist cooling (2 containers) - Material sensor - Planing head 80 mm with HSK63 holder - Becker U4.250 SA/K vacuum pump, 3 mbar final pressure - Ulmatec extraction unit IES 2-8-2 / 2.2 MD - Control software / milling software - 8x HSK63 tool holders - ER40 collet chuck set (3–26 mm diameter) Dsdjyazaqspfx Ahgjci Condition & maintenance: The machine is in good used condition and was in regular operation until recently. Important for the future buyer: Currently, the machine is out of service as the bearings and drive belts need to be replaced. The milling machine generally operates, but both axes no longer run precisely parallel – a normal wear issue that can occur with machines of this type after some time. These works should be carried out once the machine is located at the buyer’s site. Transport and installation can be handled by Buth Graviersysteme. If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM800.3200 H-202.41.6000.4E 100.20, Load capacity 3.2t Reeving 4/1 Lifting height 6m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min Djdpfjvx E Ilsx Ahgeci FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Djdjvx E I Sjpfx Ahgeci Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Several immediately available in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2t Reeving 4/1 Djdpjvx E Ncjfx Ahgoci Lifting height 10m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM1000.3200 H-323.41.6000.6E 130.20, Load capacity 3.2t Reeving 4/1 Djdpfjvx E Ixox Ahgjci Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 3M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Dcodpeu Hgllofx Ahgei Discharge Conveyor Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 22924, Exhaust Air Dust Extraction System Dimensions of suction unit: Length: 1,100 mm Width: 1,100 mm Height: 1,950 mm Dimensions of filter housing: Diameter: 900 mm Height: 1,400 mm Dimensions of control cabinet: Width: 400 mm Height: 600 mm Depth: 300 mm The exhaust air and dust extraction system has already been dismantled and is ready for collection. Dsdpfx Asv Scfushgoci

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,308 h, functionality: fully functional, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Dedpfx Ahsxuqv Nsgoci Machnie weight: 51 to Place: Austria Available immediately

Condition: refurbished (used), Force pressing cylinder: 2 x 1100 kN Capactiy cars: 30 -40 p/h Bale dimensions: 3,9 x 1,9 x 0,4 m x m Loading height: 1,32 m Cycle time: 60 s Dodpfx Ahehgibhogjci Power: 22 kW Weight: 22 t Dimensions: 7,5 x 2,8 x 3,0 Manual operation Mobile unit

Condition: like new (used), functionality: fully functional, Z1015201800 Z1010880270 etc. Dedpfxexy I D Us Ahgsci

Condition: good (used), Manufacturer: Systema Type: H100 Dcsdpfji D Dkajx Ahgei

Condition: good (used), Manufacturer: Systema Dsdpfxei D Dkdj Ahgsci Type: H100

Condition: excellent (used), Year of construction: 2004, type of input current: three-phase, input voltage: 400 V, total length: 4,700 mm, total height: 4,380 mm, total width: 4,220 mm, SALE OF AUTOMATIC PALLETIZER NOWAK NPS 1200 For sale: Automatic palletizer NOWAK NPS 1200, year of manufacture 2004, in very good technical condition, fully operational and in use until decommissioning. The machine is ideal for palletizing bags/packages in industrial automation systems. — Key machine information: • Model: NPS 1200 • Manufacturer: NOWAK Palettiersysteme GmbH • Capacity: up to 1,200 bags per hour (according to specification – page 1 of the documentation) • Compatible pallet types: • EURO pallets 800 × 1200 mm • Single-use pallets 800 × 1200 mm • Industrial pallets 1000 × 1200 mm (see page 1) — Dcjdpfx Aexwy Dhohgsi Equipment and modules included (according to page 2 of the documentation): • Empty pallet magazine – capacity: 12 pcs, automatic loading into pallet lift • Full pallet lift (up to 1,200 kg) with frequency inverter drive • Loading tables with V2A sheet covering, driven by synchronous belts • 3 × side presses for product layer centering • Scraper for product positioning on tables • Bag turner (90°–180°) with automatic adjustment • Indexing conveyor, width 1000 mm, length 1000 mm • Empty pallet conveyor 1800 mm and full pallet conveyor • Additional infeed conveyors – length 6000 mm • Operator platform and service stairs • Control panel on platform • Safety fencing with safety sensors, optical safety barriers Control cabinet includes: • Siemens S7 controller (CPU 315) • KTP 700 panel • SEW frequency inverters • New electrical sensors and wiring — Technical data (see page 3 of the documentation): • Length: 4700 mm • Width: 4220 mm • Height: 4380 mm • Power supply: 3 × 400 V, 50 Hz • Power consumption: approx. 18 kW • Conveyor height: standard 2900 mm • Pallet exit height: 550 mm • Color: Hammerschlag Malachite Green • Moving components: Yellow RAL 1023 — Condition: • Used, in very good, complete condition • Regularly serviced • Documentation and photos available upon request — Price To be agreed – please contact us for an offer.

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Conveyor could also be used for Ink Jet Printing of underside of packs Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Dsdpfxowufb Ao Ahgsci Single phase 240Volt AC supply Ready to ship worldwide

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab STARlet M The unit is in full working condition and ready for immediate use. Software is included A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Dcjdpoy Ex Uqsfx Ahgsi • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: Dedpfoyxxxvjx Ahgoci - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration