Used Solar Panel Mounting System for sale (50,797)

Condition: used, Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with solar simulation using an MHG lamp). The unit is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Equipment & Special Features: Precise temperature and humidity control Integrated humidification system with water tank Cooling via water or air system (optional) Feedthroughs for measuring cables available Control via control panel or interfaces (RS232 etc.) Stable test chamber floor, load-bearing up to 60 kg (optional reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Chamber weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Irradiated area: approx. 1,600 cm² Weathering: Spectrum 300–3,000 nm, standardized tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with radiation: –20 °C to +100 °C (±1 K) Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Ksdpfx Aaoziizmsmjnc Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, mytron Type: TS 1800 Temperature control system Technical data: External dimensions: 2120 x 2300 x 1300 W x H x D in mm Reservoir volume: approx. 1800 liters Temperature range: -40°C to +40°C Operating temperature: -40°C Temperature sensor: Remote sensor with 7-meter cable length Cooling: Cooling water inlet: 1 1/4" - socket Cooling water outlet: 1 1/4" - socket Cooling water consumption: approx. 40 l/min Condensate drain: 1/2" - ball valve Power connection: 400V, 50 Hz Power consumption: approx. 34 kVA Fuses: 3 x 35.0 AT, 1 x 6.0 AT, 1 x 4.0 AT Safety device: Over-temperature protection, fixed at 50°C Under-temperature protection, fixed at -50°C Fault indication via red signal lamp Communication: Profibus (on 9-pin SUB D connector) Air intake nozzle, top: 500 x 250 mm Air outlet nozzle, bottom: 500 x 250 mm Weight: approx. 920 kg Condition: used Scope of delivery: (See picture) Kedjzdr Edjpfx Aamsnc (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Mettler Toledo Type: DSC 3 STARe System Mettler Toledo DSC 3 STARe System FRS5+ Sensor Thermal Analysis + Accessories Service / Maintenance: Last maintenance by Mettler Toledo: 04/08/2025 Next maintenance due: 04/2027 Unit currently in service Professional thermal analysis system (high-end laboratory device) Differential Scanning Calorimetry (DSC) Ideally suited for: Research • Development • Quality assurance • Material testing The device comes from a professional laboratory environment and is in well-maintained, used condition. Knjdpfx Aaey Drl Hsmjc Your benefits at a glance: High-precision thermal analysis FRS5+ high-performance sensor Complete system incl. PC & software Incl. precision balance Extensive accessories package Incl. DSC 500 accessories kit Device functions: With the DSC 3, the following thermal properties can be investigated, among others: Melting point / glass transition Crystallinity & phase transitions Heat capacity (Cp) Reaction kinetics (curing, crosslinking, decomposition) Purity determination Oxidation induction time (OIT) Thanks to the FRS5+ sensor, the device offers very high sensitivity, stability, and reproducibility. Technical data: Model: DSC 3 STARe System Design: DSC3/500 Sensor: FRS5+ Oven power: 200 W Cooling: Air cooling / fan Lid: Automatic Power connection: 230 V AC / 50–60 Hz Fuse rating: 6 A Line output max.: 600 VA Software: STARe Software (V16.30) Operating system: Windows 10 Dimensions (approx.): 60 x 55 x 55 cm Weight (approx.): 55–65 kg Evaluation unit / PC: Dell Optiplex control PC with monitor Windows 10 installed STARe Software V16.30 Additionally included: Thermal analysis package DSC3/500 DSC 500 accessories kit Crucible sealing device Mettler Toledo precision balance (analytical balance) Measuring range: 42 g / 120 g Readability: 0.01 mg / 0.1 mg Scope of delivery: Mettler Toledo DSC 3 main unit Touchscreen control unit FRS5+ sensor Control PC (Dell Optiplex) with monitor DSC 500 accessories kit Crucible sealing device Precision balance Accessories according to pictures Extensive documentation & training materials Several folders (STARe System, E-DOC, EDU packages) USB sticks / data carriers Important: The images are the sole basis for the scope of delivery. Important note: The table shown in the photos is not included in the sale. Condition: used, like new Commercial sale Invoice with VAT possible (Subject to changes and errors in the technical data!) If you have any questions, please do not hesitate to contact us.

Condition: used, Liebisch Constamatic Type: S1000 M-TR Corrosion testing system / Salt spray test chamber Liebisch Constamatic S1000M-TR (4BVL) Professional corrosion testing system for salt spray, condensation, and cyclic climate tests For sale is a used corrosion testing system from the manufacturer Liebisch Labortechnik. The system was developed for corrosion tests under defined environmental conditions and is suitable for quality control, research, development, and material and coating tests. Due to the robust chest design and large test chamber volume, larger components can also be tested. Technical data Manufacturer: Liebisch Labortechnik Type: Constamatic S1000M-TR (4BVL) Device type: Corrosion testing system / Salt spray test chamber Design: Chest design Test chamber volume: 1000 liters Test chamber dimensions (W x D x H): 1435 x 780 x 600 mm External dimensions (W x D x H): 2600 x 1120 x 1255 mm Temperature range, test chamber: Ambient temperature to 50 °C Temperature range, humidifier: Ambient temperature to 70 °C Reservoir for salt solution: 100 liters Power connection: 230 V AC Frequency: 50–60 Hz Current consumption: 12 A Power consumption: approx. 2700 W Suitable for tests according to DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621-415 ASTM B368 MIL STD 202 F-101D VW PV 1210 as well as other corrosion and cyclic climate tests Equipment Automatic control Salt spray test Condensation test Combined corrosion and cyclic climate tests Temperature control Humidification system Test rack with sample holders Pressure gauge Large reservoir for test solution Gas spring dampers for comfortable lid opening Areas of application Automotive industry Coating and paint testing Material testing Quality assurance Research and development Laboratory and testing technology Weight: 450 kg Condition Knjdpozcdyxjfx Aamec Used Normal signs of wear and tear Interior with discoloration due to corrosion from previous testing operations Optical condition as shown in the pictures Scope of supply as shown in the pictures Scope of supply 1x Liebisch Constamatic S1000M-TR corrosion testing system Test rack and integrated holders Other accessories as shown in the pictures Inspection and testing on-site are possible by arrangement and are highly recommended. Loading can be organized by arrangement. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Used, two-story container system from the manufacturer GRAEFF. Manufacturer: GRAEFF GmbH Type: 2917.1 Ksdpfxoz Srvko Aamonc Design: Two-story container system Number of containers: 14 Total length: approx. 21.00 m Total width: approx. 7.50 m Floors: 2 Height of one container: 3.40 m Previous use: Chemistry and physics lessons Room layout: Classrooms, preparation rooms, technical rooms, and hallways Equipment: Laboratory tables, sinks, base cabinets, media supply via ceiling-mounted systems, lighting, and electrical installations Windows: With roller shutters Access: External steel staircases with railings Plans: Floor plans and site plan available

Condition: used, Year of manufacture: 2002 Knsdpfx Aaezvx Rkemec Year of design: 2002

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2008, loading space length: 13,600 mm, loading space width: 2,450 mm, loading space height: 2,660 mm, total length: 13,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22.5, wheelbase: 8,910 mm, color: yellow, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear doors - Spare wheel - Toolbox = Additional Information = General Information Knjdpozr Hcyefx Aamoc Year of manufacture: 2008 License plate: OJ-33-XX Axle Configuration Tire size: 385/55R22.5 Axle brand: BWP Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Brakes: Drum brakes Rear axle 2: Max. axle load: 9000 kg; Brakes: Drum brakes Rear axle 3: Max. axle load: 9000 kg; Steerable Weights Unladen weight: 7,500 kg Payload: 31,500 kg GVW: 39,000 kg Maintenance APK (Technical Inspection): valid until 06/2027

Condition: excellent (used), mileage: 70,497 km, power: 132 kW (179.47 HP), first registration: 12/1991, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,650 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro1, total width: 2,450 mm, permissible axle load (axle 1): 6,000 kg, permissible axle load (axle 2): 10,000 kg, General information Year of construction: 1991 Cab: single Registration number: VP-61-FH Knedpfx Aoz Avzmjamec Technical information Number of cylinders: 6 Max. front axle load: 6000 kg Max. rear axle load: 10000 kg Weights Empty weight: 10.930 kg Carrying capacity: 5.170 kg GVW: 16.000 kg Functional Water tank: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, 3D systems Here, we offer a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Large line detection: 25m/sec Build volume capacity: Kedszd Tt Aepfx Aamjnc RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Iridex Type: Iridex OcuLight SLx Laser: IRIDEX Oculight SLx Tri-Mode 810 nm diode laser Description: Designed for longevity, with a thermal management system to enhance laser conversion efficiency and reliability. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The Tri-Mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems provide a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repetitive exposures. The LongPulse mode delivers laser energy over extended periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top device Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot SLAs, LIO, and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Kodpfjzd Uubex Aamenc Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also offers some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractory glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser Indirect Ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in a supine position. It features a unique optical design that eliminates the need to adjust the laser focus and allows for a wide range of working distances. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Eos EOSINT Here, we offer an Eos EOSINT plastic laser sintering system. The following items are included with the EOS P380 system: Build chamber Powder container Overflow container 3DM 8-zone process chamber heating, 250°C Each zone can be adjusted individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg EOSINT P 380 Condition: used Scope of delivery: (See image) Kedpezdyxljfx Aamjnc (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, RMS RMS Electrodynamic Vibration Test System Vibration exciter SW 3006+ Power amplifier TGA 1500 Technical data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Displacement pk-pk: 26 mm Velocity: 0.9 m/s Kodpozd Rvzjfx Aamonc Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Horiba Type: Mexa 7100D Knedpezdy Rnsfx Aamoc Horiba exhaust gas system Mexa 7100D Including JAG-10-000-061 cylinder cart, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems Modal analysis (dynamic or transient analysis) during non-stationary operating conditions Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 kg Year of manufacture 2016 Collection from our location Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Adept Control Unit Model 310 with Operating Panel Here we offer an Adept control unit, Model 310, with an operating panel. Adept control unit, Model 310, with operating panel. Kjdpfjzdimaox Aamonc Control unit, touch panel, cables, and software package. Type: Model 310 Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration units Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled, diode-pumped Nd:YAG laser with Hurryscan 10 – galvo head from Scanlab Fuchs extraction and filtration units TKFD The integrated pre-separator ensures high filter capacity Ksdpfx Aaszdqcujmonc Different filter stages are possible and can be perfectly adapted to individual requirements Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Panasonic SUNX Type: LP-431-C Laser Marker Knedpszdqpzofx Aamoc Product Features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm, 0.417 mil Laser power, continuous wave: approx. 30 W Speed: 240 m/min or less Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process area cover: 0-55 mm or 0-2.2 inches Permissible ambient temperature: 0 - 40 degrees Celsius Permissible humidity: 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix, and bar codes Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, Fanuc Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Fanuc robot with control unit Fanuc robot M-420I A The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance with high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Programming teach pendant Ksdpfx Aajzdit Tjmsnc Large work envelope with a horizontal reach of 1855 mm Repeatability of +/- 0.5 mm at full speed and full payload throughout the entire work envelope. Linear motion speeds up to 4200 mm/s. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER Knjdszdy Iaopfx Aamjc The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-in components. Intended use: The machine is used for pressing in fastening elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fastening elements: Press-in nut, rivet nut, self-piercing nut, press-in pin, punch pin / rivet pin Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connection plug HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fastening elements are pressed in automatically. Movements are only initiated when the operator presses the foot pedal, thus triggering the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of delivery: (See image) Knedpfx Ajzgr I Roamec (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) Knsdpfxszix Nmo Aamec We will be happy to answer any further questions you may have by telephone.

Condition: used, Brüel & Kjær LDS Dactron Shaker Control System / Vibration Testing Controller LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Mains connection: 100–240 V AC Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Kedpjzrtylsfx Aamenc Scope of delivery: 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Knedezd Uh Ispfx Aamec Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Complete line to produce pancakes, crepes and blinis. Carousel hot plate system. In excellent condition. Knodpfx Aaox Hailsmsc

Condition: used, This listing is for a Qiagen QIAgility PCR Prep System Knsdpjxzgxgefx Aamsc

Condition: used, This listing is for a Dionex HPLC System Knedpfoxzhm Ssx Aamsc Combination includes Dionex AS3500 Dionex GP50 Gradient Pump Dionex ED50 Electrochemical Detector Dionex AD250 Absorbance Detector Dionex LC25 Cromatograph Oven Bottle trays This system has been removed from the lab while in good working condition, it was well serviced and is still in very good condition.