Used Self-Loading Concrete Semi-Trailer for sale (40,853)

Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°) * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading platform with rear bevel (approx. 1,000 mm x 8°) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 235/75 R 17.5 3PMSF tyres, brand at our discretion Axles: * BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function * Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually) * Axle tools Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit Steel structure: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa) Electrical system: * Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098) Paintwork: * Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the bulkhead (without spare wheel) * 2 inch kingpin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * Receptacle at the rear of the gooseneck for ALU loading ramps * Galvanized drop-down supports under the loading area bevel * Bracket for a revolving beacon at the rear of the trailer * Brackets left and right on the gooseneck and rear plate for warning signs including socket * TPMS tire pressure monitoring system compliant with ECE R 141 * Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container * Sliding hook-in rails for ALU loading ramps at the rear of the vehicle Lhodpfxsyvnfgj Al Ieh * 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control based on current axle load and load status * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry-

Condition: used, machine/vehicle number: XL962000050002174, axle configuration: 2 axles, first registration: 09/2005, color: other, Year of construction: 2005, Please contact us for more information. Ledpfxsxamvve Al Ijhh

Condition: used, Opal Type: Opal 460 Opal 460 from ATM The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph samples. The process sequence is carried out automatically. The fully automatic sliding shutter enables trouble-free opening and closing of the mounting area. and closing of the embedding area. Manufacturer ATM Q Ness GmbH Model OPAL 460 Functional principle: The Opal 460 is a fully hydraulic, water-cooled hot mounting press for mounting micrograph specimens. During hot mounting, the specimen is embedded in a mounting press under temperature and pressure with a plastic granulate. The advantages of the process are the high hardness of the embedding material (e.g. glass fiber reinforced) and the good freedom from splitting. Hot embedding agents are available based on epoxy resin, acrylic resin, phenolic resin and graphite resin. Main area of application: Mounting of samples for better sample preparation for further metallographic examinations. Technical data: Press mold Ø 30 mm, Ø 50 mm Temperature range 20 ... 200 °C Max. Pressure 310 bar Weight ~ 40 kg Condition: used Lhsdpovd Dlgjfx Al Ioh Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), functionality: unexamined, empty load weight: 18,940 kg, maximum load weight: 71,630 kg, overall weight: 18,940 kg, axle configuration: > 3 axles, first registration: 12/1992, loading space width: 3,100 mm, suspension: hydraulics, tire size: 245/70R22.5, wheelbase: 1,360 mm, color: blue, Year of construction: 1993, operation weight: 90,300 kg, Noteboom OSBDAZ-66 90T Machinery Transport Gondola Low-bed Lhedexgh Exepfx Al Ioh Front loading and unloading 4 steering axles

Condition: ready for operation (used), functionality: fully functional, empty load weight: 5,500 kg, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, suspension: air, tire size: 445.45 r 19.5, color: dark red, Year of construction: 2017, Equipment: ABS, sem berger french curtainsider mega volume, lightened chassis, tare 53q.li, 3 disc axles, french curtainsider with lift and lower at adjustable heights from 2.90m to 3.05m in running order, rear doors, sliding roof cover, trailerable plywood floor, collar hooks on the floor, year 2017, closed pallet rack for 24 units, vehicle coming from abroad already nationalized for Italian registration - INTERDRIVE SRL DEALER - PARMA Ljdpfx Alewg E Tve Iehh

Condition: new, maximum load weight: 27,500 kg, overall weight: 35,500 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 2,060 mm, Year of construction: 2025, Equipment: ABS, Hinterachse 3: Reifenmaß: 435/50R19.5, Marke Achsen: BPW, Reifen Profil links außen: 100% Zuladung: 27,430 kg Loading capacity: 1360 x 255 x 106 cm Marke des Aufbaus: AKLU Pumpe: Yes === Information in English === Rear axle 3: Tire size: 435/50R19.5, Make axles: BPW, Tire profile left outer: 100% Carrying capacity: 27,430 kg Dimensions of cargo space: 1360 x 255 x 106 cm Make of bodywork: AKLU Pump: Yes new machine unused Brand: DIV. Year of construction: New Type: Twente Trucks AKLU Mega extendible car transporter RV camper loadramp Construction: Car transporter Id: VK HHD Price {¤): ¤ 51,000,- Lsdpfx Aljmnpc Io Iohh

Condition: new, Self-propelled concrete distributor. Hopper capacity: 2 m³, 3 m³, and 4 m³ (other sizes also available). Various options available, such as closed cabin, reversing camera, fully enclosed covers for the concrete auger, and slide valve. More information available on request. Lhjdjx Ap Awopfx Al Ijh

Condition: new, KALEPAR KLP 228V6M1 6-UNIT CAR TRANSPORT SEMI-TRAILER ● All functions operated via wireless remote control (full radio control) ● Braking system: 2S-2M Wabco EBS-E ● Suspension system: Pneumatic system ● Electrical system: 24 V Aspoeck ● Tires: 8+1 units 245/70 R17.5 Lhjdex Dzydepfx Al Ieh ● Axles: 9-ton axle SAF or BPW ● Empty weight: from 9,000 kg to 9,500 kg ● Gross vehicle weight: 29,500 kg (11,500 kg fifth wheel load + 18,000 kg axles) ● Kingpin height: from 950 mm to 1,050 mm ● Trailer width: 2,550 mm ● Trailer loading length: 13,500 mm ● Total trailer length: 16,500 mm ● 1-year warranty COC documents (European EC type approval) NEW VEHICLE WITHOUT REGISTRATION VDI2700/8.1 Certified TÜV SÜD Also available as a 4-car 2-axle or 5-car 2-axle version Net sale for export possible. All information without guarantee. Errors and omissions excepted!

Year of construction: 2011, condition: excellent (used), TIMA VOLLALU universal transporter with tilting loading area Type: GTAHK 360/188/3.5 Internal dimensions: 3500x1880x300mm Total weight: 3500kg Lhjdpjhwmr Hjfx Al Ish Payload: 2800kg Own weight: 700kg Tyres: 155/70 R12C Year of construction: 2011 Certificate valid until 07/2022 VOLLALU - trailer with tipping loading area Frame welded in hollow profile construction Aluminum plank floor Double-acting hydraulic cylinder for tilting function spare wheel mounted 8 pcs. lashing eyes

Condition: new, maximum load weight: 36,360 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear slope approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing laths approx. 15 x 15 mm, including extensions at the bottom * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the slope and extending into the platform for accommodating an excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cut-outs in the platform's outer frame for attaching tie-down straps (LC 2,000 daN) Two-Piece Steel Ramps: * One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically folding ramp sections and hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated automatically by reverse gear and manually * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) Lodpoyhkq Usfx Al Ishh Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final paintwork with two coats of 2K topcoat, solid RAL 3002 Carmine Red, in accordance with RAL System 841GL * Wheel rims in silver grey Incl. the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic power unit at the rear, under the loading platform * On the gooseneck: plug-in aluminum drop sides and tail board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable (body length approx. 2,560 mm). * One galvanized toolbox integrated in the gooseneck chamfer * 2 pairs of WADER container pockets on the loading platform for a 20' or 30' container * 3 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * 3 additional pairs of removable galvanized covers over the wheel recess – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hook-on intermediate table, approx. 300 mm wide * Intermediate table with offset load ar

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable Lsdpfjyhkrrjx Al Iohh * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley Lhedpfjyhkqzex Al Ieh * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Lhedsw Tpq Djpfx Al Ieh Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm Lhsdpfow Tprzjx Al Ish * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) Lhsdpfx Aou Sd U Ujl Ieh * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: new, empty load weight: 13,780 kg, maximum load weight: 26,000 kg, axle configuration: > 3 axles, suspension: steel, wheelbase: 3 mm, mileage: 150 km, power: 480 kW (652.62 HP), gearing type: automatic, emission class: euro6, fuel: diesel, load capacity: 12,220 kg, Equipment: Bluetooth, air conditioning, central locking, cruise control, fridge, onboard computer, rear view camera, HIAB MULTILIFT FUTURA 18T Telescopic arm 1400mm Stabilisers Radio remote control Skip stops Chains with 43 links BKGC hooks Hour meter Storage boxes Rockinger RO 50 hitch Aluminium mudguards Reversing camera Air conditioning Refrigerator Blind spot monitoring Lodsx Hkulspfx Al Ishh Multimedia touchscreen Bluetooth Sunroof Differential lock … Wheelbase 3400mm

Condition: good (used), functionality: fully functional, empty load weight: 7,118 kg, maximum load weight: 31,882 kg, overall weight: 39,000 kg, first registration: 04/2008, suspension: air, Year of construction: 2008, Equipment: ABS, MEGA trailer. Sliding tarpaulin, Edscha, hydraulic lifting roof. Please call if interested. Lhsdpfew Nhpkex Al Ijh

Condition: good (used), functionality: fully functional, empty load weight: 8,100 kg, maximum load weight: 28,700 kg, axle configuration: 3 axles, first registration: 11/2002, loading space length: 13,650 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, suspension: air, tire size: 385.65 r 22.5, color: green, Year of construction: 2002, operation weight: 36,800 kg, Equipment: ABS, sem tecnokar single box side tipper, 100cm side rails in 4 sections, 3 disc axles with 1st liftable and 3 steerable, electric lift lowering and cover find out , rear doors, year 2002, pallet rack, sliding sheets, ebs, air suspension, overhauled until 31.07.2024-CONCESSIONARY INTERDRIVE SRL-PARMA Ledporllhyofx Al Ishh

Condition: good (used), functionality: fully functional, empty load weight: 5,800 kg, maximum load weight: 31,000 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 01/1970, loading space length: 8,500 mm, loading space width: 2,435 mm, loading space volume: 42 m³, suspension: air, tire size: 385.65 r 22.5, color: silver, Year of construction: 1996, Equipment: ABS, 42m3 aluminum tipper tank semi-trailer, aluminum frame, 3 axles with 1st liftable and 3rd steerable, adjustable air suspension, watertight tailgate with tilting opening, manual sliding discover cover, year 1996, good condition, tare 5.8 ton, CONCESSIOANARIO INTERDRIVE SRL-PARMA Lhedpfxjq Ttn Ss Al Ieh

Condition: good (used), functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 21,000 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 05/2009, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 285.70 r 19.5, color: red, Year of construction: 2009, Equipment: ABS, sem eichkorn 2 axle discs with hydraulic tridec steering, extendable from 13.80ma 21.35m, EXTE side posts seats for transporting wood \ logs, exte poles included, twist attachments for transporting 40ft containers, year 2009, side rud hooks, no. 4 aluminum tailboard sections, removable and openable 70cm high, ebs, vehicle already nationalized, CONCEASSIONARY INTERDRIVE SRL-PARMA Lodorum A Tspfx Al Ishh

Condition: like new (used), SCHMITZ CARGOBULL GROUP CARRIER 3004 HOURS 19/09/2022 FRIDGE PV 8275 KG PALLET BOX Ledsv Exxkspfx Al Iohh OUTDOOR TEMPERATURE DOUBLE DOOR LOCK DOOR SAFETY LOCK

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, RENAULT TRUCKS 460 tractor unit, complete with PIACENZA tipping semi-trailer model S38R2F and MARCHESI crane. Tipper make/model: GMF model RPE. Truck year: 2011. Semi-trailer year: 2006. Mileage: approx. 650,000 km. Semi-trailer payload: 26,580 kg. Truck tires: 315/60R22.5. Semi-trailer tires: 385/65R22.5. Transmission: Manual. EURO 5. Equipped with double bed; equipped with air conditioning. Lhodpoy Ixp Tefx Al Ijh

Condition: used, Year of construction: 1985, 1985 | Langendorf SATÜ 18/18 Fully Refurbished | Used Low Bed Semi-trailer 📍Location: Austria, Eberdorf 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 13900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 15 inspection points 6 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Freshly renovated, not used after repair. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39629 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Lsdpfxexan E Ej Al Ijhh ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, empty load weight: 5,280 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2014, loading space length: 7,400 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: silver, Equipment: ABS, Drum brake EBS Payload 29,720 kg Air lift suspension Rolling tarpaulin Platform BPW axles Foldable underrun protection Lsdpevwl R Rjfx Al Ishh Errors excepted

Condition: used, empty load weight: 6,150 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 04/2016, loading space volume: 24 m³, tire size: 425/65 R22,5, color: yellow, Equipment: ABS, Drum brake EBS Wheelbase 1,310 mm Payload 25,850 kg Air-lift suspension Roll-up tarpaulin Platform BPW axles Folding underride guard Lhodpsrlm I Eofx Al Ieh Errors excepted