Used Sciteex Heat Treatment Sciteex - Blastlux for sale (13,189)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Bdjdpfxok S Dt Te Ammjc Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories Bjdpfxjgrkige Ammedc It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details Bsdpsx Ap Itofx Ammodc - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press Bdedpfetwv S Nox Ammsc For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Make: DMUK Bdjdoy E H Eqopfx Ammsc Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Circulation Pump: Included Control Panel: Included VDF: Included Condition: Excellent

Condition: refurbished (used), The MALLDISON milk pasteuriser with a capacity of 1000 liters per hour is typically designed for efficient processing of milk, ensuring safety and preservation of quality through pasteurization. Here are some key features and aspects you might find relevant: - Functionality: The machine heats milk to a specific temperature for a set period, killing harmful bacteria while preserving essential nutrients. - Capacity: With a processing capability of 1000 liters per hour, it's suitable for medium to large dairy operations, allowing for high volumes of milk to be pasteurized quickly. - Design: Many pasteurisers feature a stainless steel construction for hygiene and easy cleaning. They often have insulated heating chambers to maintain temperature efficiently. - Control System: Modern machines often come with digital controls for precise temperature and timing adjustments, improving the reliability of the pasteurization process. - Safety Features: Look for built-in safety systems that can prevent overheating or pressure build-ups, ensuring safe operation. - Efficiency: The design often focuses on energy efficiency to reduce operational costs associated with heating. Divert Valve: Included Bdedpfxoxzxwho Ammoc Construction: Fully stainless steel skid amd stainless steel parts for the product Chart Recorder: Digital with Latest upgrade and test report in 2025 Balance Tank: Included Product Pump: Included Hot Water Pump: Included Heating: Self Heating with Built in Electric Elements Temperatures: Temperatures : 4-45-55-65-78(72) and out at 4 c Connection for Separator in line connection to Homogeniser Capacity: 500-1,200 L/h Available: Immediately

Condition: used, This listing is for a second-hand DTG/DTF printer, the ‘Brother GTX 423Pro’ Items included: Bdsdpfjy R Nmhex Ammoc 1 x Brother GTX 423Pro with the following accessories: Includes Lotus Heat Press LTS 150B Slide Includes Schulze PreTreat maker 5 Meter readings: Total: Approx. 5,500 prints Condition: This listing is for a second-hand device, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2009, functionality: fully functional, total height: 5,500 mm, total length: 16,500 mm, total width: 6,400 mm, Equipment: cabin, For sale is a high-quality, modular industrial coating system from the reputable manufacturer RIPPERT Anlagentechnik (consignment no. 20809025), manufactured in 2009. The system is located in Nuremberg, has a linear layout, and is fully documented. Ideal for industrial processing of large parts or series production. Dimensions: L x W x H: approx. 16.5 x 6.4 x 5.5 m Combination painting booths (1 & 2): each approx. 6 x 4 m Washing booth: approx. 4.5 x 4 m SYSTEM SCOPE: - 3x Combination painting/drying booths: Including large folding doors, complete lighting, and supply/exhaust air ducts. - 1x Industrial washing booth: For professional workpiece cleaning and preparation. - 1x Technical room & daily supplies storage: Contains the media control system (RLT 4.0) and an integrated logistics zone. TECHNICAL DATA & CONTROL CABINET: - Central control cabinet: Rittal TS 8005 floor-standing enclosure (dimensions: 3600 x 2200 x 500 mm, RAL 7035). - Connection values: Main circuit 400 V, rated current 450 A with integrated PLC control. - Media connections: Prepared for gas (burners 1–4), compressed air, demineralized/city water, wastewater, and pump warm water. IMPORTANT CONDITION NOTE & DELIVERY SCOPE: The original operating manual (volume 2a: mechanics/drawings) and the complete electrical documentation are included in the delivery scope. Note: Offered as shown in the pictures, with the exception of the pallets in the foreground. DISMANTLING AND DELIVERY CONDITIONS: - Self-dismantling (preferred): Professional dismantling and transport are carried out by the buyer at their own cost and risk. - Dismantling for an additional fee: Organized dismantling or provision is possible after prior agreement and cost coverage. KEY DATA & LEGAL INFORMATION: - Location: Nuremberg - Inspection: Possible after prior arrangement. Upon request, loading and transport (throughout Europe) can be organized for an additional fee. Upon request, transport and loading can be organized for an additional fee throughout Europe. Bjdjy U I Ulepfx Ammodc Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Bjdpfxew I T Ivj Ammjdc Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 Bodju Scqbjpfx Ammjdc -Power: 20.3/23.3 kW -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Bjdpfsy Uuwmex Ammedc Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Bdedjy Uuu Eopfx Ammjc Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated continuous furnace system, make Safed consisting of: Magnetic feeder Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Temperature: max. 950°C Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Bath temperature: max. 80°C Washing system Bedpfx Amoy Ur Aaomodc Annealing furnace

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min Bedpfx Aju U Ey Iemmodc - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW Bodpfxoygx Tze Ammodc - Year: 2013

Condition: new, functionality: fully functional, power: 11.2 kW (15.23 HP), fuel type: diesel, fuel consumption per hour: 4 l/h, color: orange, operation weight: 1,800 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: adjustable chassis, air conditioning, cabin, parking heater, rubber tracks, The SE18 mini excavator, in the 1.8-ton class, impresses with its compact dimensions, powerful performance, and high-quality equipment for professional use. Equipped with the proven Kubota D902 diesel engine, modern hydraulics, a comfortable full cab with air conditioning, a heating function with remote control, and a comprehensive set of buckets, this machine is ready for immediate use. Whether in civil engineering, gardening and landscaping, municipal applications, or on tight construction sites, the SE18 offers maximum flexibility, high reliability, and excellent value for money. ✅ Highlights at a glance ✅ Kubota D902 3-cylinder diesel engine – reliable, fuel-efficient, and durable ✅ 1,550 kg operating weight – compact, stable, and powerful ✅ Full cab with ROPS/TOPS – CE-certified and safe ✅ Air conditioning with heating function and remote control – comfortable working in any season ✅ 2 auxiliary hydraulic circuits – suitable for hammers, grapples, augers, etc. ✅ Adjustable undercarriage 1,000 – 1,250 mm – perfect for tight construction sites ✅ Side-swinging boom left/right – precise work on walls, edges, and obstacles ✅ Mechanical quick coupler included ✅ 3 buckets included in the set ✅ Immediately available – delivery possible 🔧 Technical data Model: SE18 Class: 1.8 t mini excavator Operating weight: 1800 kg Engine: Kubota D902, 3-cylinder diesel Power: 11.2 kW Undercarriage: Rubber tracks, 230 mm Adjustable undercarriage: 1,000 – 1,250 mm Dozer blade: 1,100 mm Boom: Side-swinging left/right Pin diameter: 25 mm Auxiliary hydraulics: 2 auxiliary circuits Full cab, CE-certified, ROPS/TOPS Air conditioning with heating function, opening front window, side sliding window Included in the scope of delivery: ✔ Digging bucket 30 cm with teeth ✔ Digging bucket 50 cm ✔ Digging bucket 80 cm ✔ Mechanical quick coupler ✔ Hydraulic thumb / grapple thumb ✔ Air filter ✔ Fuel filter ✔ Oil filter ✔ Toolbox ➡️ Get in, start, and work – the machine is ready for immediate use. 🛡️ Safety & Certification The machine is CE-certified and complies with the relevant European directives: Bdedex H Tiropfx Ammsc ✅ 2006/42/EC – Machinery Directive ✅ 2014/30/EU – EMC Directive ✅ 2011/65/EU – RoHS Directive The cab is equipped with a ROPS/TOPS safety structure and offers the driver protection, visibility, and comfort. 🧰 Service & Warranty ✅ 12 months warranty throughout Europe ✅ Spare parts available directly from the warehouse ✅ Service and advice from Rheda-Wiedenbrück ✅ Inspection and testing on-site possible 🔥 Special price only €12,500 net – complete set included! 📍 Location: Rheda-Wiedenbrück, Germany 🚚 Delivery possible ✅ Immediately available ✅ Machine is ready for use Our machines can be viewed and tested on-site. Contact us for more information, an individual offer, or a short-term visit.

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished) Bsdey H I Ngopfx Ammjdc

Year of construction: 2003, condition: used, Technical details: Bsdpfeu N Afgjx Ammedc operating pressure: 10 bar voltage: 400/50 V/Hz control voltage: 24 V total power requirement: 0,76 kw weight of the machine approx.: 160 kg dimensions L x W x H: 0,58x0,68x1,35 m heat exchanger application area: transportation of heat energy from a medium to another medium (liquid or gas) connections 3/4" for flow/return 2x both sides 2 Pieces available *

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 6678, overall weight: 4,000 kg, power: 280 kW (380.69 HP), heating capacity: 280 kW (380.69 HP), smoke pipe connection diameter: 400 mm, nominal heat output: 300 kW (407.89 HP), Nolting wood heating boiler, sturdy high-quality stove. Features automatic wood feed and a separate manual stoking section. Manual filling capacity: 1000 liters. Bdodpfxsy Sgi No Ammsc

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2,710 kW (3,684.57 HP), pressure: 6 bar, heating capacity: 2,510 kW (3,412.65 HP), temperature: 110 °C, tank capacity: 5,020 l, operating pressure: 6 bar, Equipment: hot water, type plate available, FOR SALE – COMPLETE INDUSTRIAL BOILER ROOM – YEAR 2022 Never used Complete industrial boiler room for sale, currently installed on site. LOT INCLUDES: • 2 Steel Hot Water Industrial Boilers Brand: Riello Model: RTG 2100 Year: 2022 Nominal thermal output (per unit): 2710 kW Useful output (per unit): 2510 kW Total thermal output: 5420 kW Maximum operating pressure: 6 bar Maximum temperature: 110 °C Water capacity: 5020 liters per boiler Heat exchange surface: 70 m² CE-certified • 2 Modulating Industrial Burners Brand: Riello Model: RX 3000 S/E Operation: Gas / Oil (configurable) With gas trains, safety systems, and accessories • 3 Industrial Expansion Vessels / Tanks Brand: Varem Large capacity With pressure gauges and accessories • Complete Hydraulic Groups Industrial circulation pumps Clearly visible manifolds and connections • Industrial Electrical Cabinets Bodpjy Rthijfx Ammjdc Control and power cabinets Protection devices, equipment, and cabling included • All other visible accessories related to the installation are included in the sale --- CONDITION: Very clean installation Equipment very lightly used Indoor storage System still installed for a short period On-site visit possible by appointment --- POSSIBLE APPLICATIONS: • Industrial boiler room • District heating network • Industry and logistics • Hospitals and tertiary buildings • Export --- LOGISTICS: Dismantling scheduled soon On-site loading possible Transport at buyer’s expense --- Lot sale preferred Possible individual sale depending on project Price: to be negotiated Photos and further information available on request

Condition: like new (used), functionality: fully functional, Newly arrived! We can offer you this top incubator / heating cabinet type B 5028 of the world brand "Heraeus" from federal stocks. The B 5028 is characterized by its particularly precise temperature control and minimal energy requirements and, due to its almost indestructible quality / design, is virtually indispensable in any laboratory. Thanks to its extremely compact design, it fits ideally as a table-top unit even in the smallest corner and can be connected electrically almost anywhere - power consumption only 180 watts! The minimum temperature deviations comply with DIN 58945 Sheet 1, and the appliance also has a timer, fresh air supply and overload/temperature protection. The appliances offered here are all from stock and have never been used - all components are in mint condition and undamaged - see pictures. The delivery takes place in a special wooden box, including power cable and operating instructions. Technical data: Temperature range 10-70 degrees External dimensions (WxHxD): 510 x 540 x 450 mm Internal dimensions (WxHxD): 260 x 350 x 320 mm Usable capacity approx. 28 liters DIN 12880 part 1 and 2 tested Protection class 1 IP 20 Temperature monitor according to DIN 12880 class 3.1 Bjdeqv Avtjpfx Ammsdc Shelves: 2 Weight: approx. 30 kg Shipment will be made within three working days of receipt of payment by a forwarding agent - you can of course also collect the appliance from us during regular opening hours. The total weight of the system including accessories and pallet is approx. 60 kg. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, functionality: fully functional, machine/vehicle number: 00039D88, For sale is a used heating oil pressure unit, model OEG Gerätebau DE 3200, for the reliable pumping and pressure maintenance of heating oil in heating systems. This pressure unit is suitable for supplying oil-fired systems and ensures a constant fuel supply. Thanks to the integrated pressure accumulator, pressure fluctuations are compensated, and stable system operation is supported. Technical data: Manufacturer: OEG Gerätebau Model: DE 3200 Flow rate: 320 l/h Operating voltage: 230 V / 50 Hz Nominal current: 2.0 A Max. operating pressure: 6 bar Pressure connection: IG ¾" Suction connection: IG ¾" Year of manufacture: as per nameplate CE marking present Bdsdpfoy U Uc Njx Ammoc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit - As new Bdodpfxozazras Ammec - Control cabinet still in original packaging - Located in Genthin We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time.

Condition: good (used), Year of construction: 2022, Heating oil tank, 27,000 liters for heating oil/diesel – used - : Price: only €9,950 (net), ex location, emptied, cleaned and including loading! Manufacturer: Kampitz Bsdpfx Amsy I Ry Demjdc Manufacturer number: 42089 Year of manufacture: 2022 Type: Z 38 12-312 Volume at permissible fill level: 27.82 m³ Permissible filling degree: 95% Material (inside and outside): S 235JR Hazard class: FP > 55°C Permissible density: 1.0 kg/ltr. Test pressure storage area: 2.60 mWs Test pressure leak monitoring area: -0.60 bar Max. medium temperature: 50°C Medium: heating oil / diesel Condition: good Available: immediately Location: Bünde, NRW

Condition: used, Year of construction: 1995, operating hours: 20,000 h, functionality: fully functional, power: 410 kW (557.44 HP), smoke pipe connection diameter: 320 mm, For sale: Spänex heating system including discharge unit. The silo discharge is from Pöllhuber. The silo diameter is 8 m. The heating room height is 3 m. Available from mid-year by arrangement. Bodpsykky Ijfx Ammedc