Used Sandblasting Plant for sale (3,433)

Year of construction: 2014, condition: ready for operation (used), An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible. Hsdpox Sywgofx Ap Esfn

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Hfjdpoxc Ni Rjfx Ap Ejn

Condition: ready for operation (used), Year of construction: 1997, A boiler system with underfeed firing is available. Heating capacity: approx. 2300kW. An on-site inspection is possible. Hodpfjxwcuvsx Ap Eefn

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Hsdpfxettbd Ns Ap Ejfn

Year of construction: 1988, condition: ready for operation (used), A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible. Hedpfxsw Dfgwj Ap Eefn

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Hfsdpfx Apjvdu N As Een

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Hfsdpfx Apsucfwpj Ejn

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Hfedpfx Apjy Aad Ij Ejn

Year of construction: 1970, condition: ready for operation (used), Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible. Hjdozghflspfx Ap Eofn

Condition: ready for operation (used), Year of construction: 2012, Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible. Hfedpfx Apszk I U Uj Esn

Condition: used, No. 10031 Mobile screening plant with trailer Spaleck SEWU 2400 x 5000 Used According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Screening plant Spaleck SEWU 2400 x 5000 Used, year of construction 2012 Trailer Multi-Trans ZAL 4PA Used Load capacity 47000 kg Weight 8600 kg Conveyor belt STK Metall ML-BAND Used, year of construction 2012 Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price Hsdpfx Aoyl Sg Ssp Eofn To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. Hedpfxsxlif Re Ap Esfn This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: excellent (used), Year of construction: 2017, Plastic pallets 1200x850x40, €17 each, available quantity: 1800 pcs. The quoted price is per piece. Hfsdpfx Apsxl Rpqj Esn

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Damak 176-pocket intermediate proofer with adjustable timings for dough resting. Fitted with removeable pockets for ease of cleaning. Manufacturer - Damak Makina. Model - DM IP 176. Date of manufacture - 2021. Input height - 800mm. Output height - 1550mm. Electrical requirements - 415 V / 50 hz / 3 phase. Power - 5 kW / 13 Amps. Please note - the front panel is missing on this machine (as per photos). Hfsdpfx Aox I Sn Nep Eon

Condition: good (used), Year of construction: 1999, thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter Hsdjvtzdlepfx Ap Eefn -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available -Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Condition: new, Year of construction: 2025, machine/vehicle number: 857226635, Gasparin Jaw Crusher GI107C VESUVIO Mobile jaw crusher on a tracked chassis The mobile crusher GI107 VESUVIO stands for versatility and can be configured in two different ways. Equipped with a grizzly vibrating feeder (GI107C), it is suitable for more traditional applications. With a vibrating feeder and a pre-screen, the machine (GI107CV) is suitable for demanding applications with high fines content and high material moisture. With its standard equipment, including the patented HCS system (Hydraulic Crushing System), VESUVIO is the best answer to the requirements of professionals and rental companies. Production capacity: approx. 300 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Crushing gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3000 mm Dust extraction Tank pump Magnetic separator Warranty: 1 year, up to a maximum of operating hours from the start of operation of the system Technical data: Jaw crusher: 1020 x 700 mm Crushing gap: 45 to 180 mm Feed hopper: 5 m³ - 2000 x 3960 mm Grizzly feeder: 970 x 3600 mm Main conveyor belt: 800 x 9600 mm 4-cylinder diesel engine with constant speed: 82 hp / 60 kW, emission stage V Control panel Tracked chassis: 400 x 3310 mm Weight: kg Transport length: 12900 mm Transport width: 2530 mm Transport height: 3200 mm Further information Hfodpohd I Rwsfx Ap Eon Application: Construction, General condition: very good, Technical condition: very good, Optical condition: very good, Delivery terms: EXW.

Condition: new, Year of construction: 2025, machine/vehicle number: 401064052, mobile concrete plant Frumecar EBA 1000 - Year: NEW - 4 aggregate hoppers of 25 m³ - Capacity: 50 m³/h - mixer size: 1.0 m³ / 1500 liters - K2 portable computer system - screw conveyor for cement - cement silo 55 tons - international assembly included - 2-year guarantee This offer is subject to change, and may contain input errors and mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. Hodjhd I S Aepfx Ap Ejfn more machines and mixing plants on our website Further information: Intended use: construction, usable material: concrete.

Condition: new, Year of construction: 2025, machine/vehicle number: 872406335, Frumecar EMA 500 concrete batching plant Year: NEW Production: 30 m3 per hour * Capacity of the aggregate hopper – 25 m3 (4 x 6.25 m3) Hfodpfxohd I Ute Ap Eon * The bunker has 8 discharge gates with pneumatic opening system (2 per compartment) * Mixer – planetary mixer, 0.5 m3 of vibrated concrete per cycle * Skip for the elevation of the aggregates * Water pump is included * Compressor is included * Large control cabin is included (2.0 m x 2.0 m) with air conditioning * 1 cement silo, 60 tons * Erection of the plant and training of your employees are included * 1-year guarantee from startup of the plant More machines and mixing plants can be found on our website. Further information: Intended use: Construction, Usable material: Concrete, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 381201764, Gasparin GI118CV OLIMPO Mobile jaw crusher on a tracked chassis Hodpfx Aehd I U Ejp Eefn The sheer power that the OLIMPO delivers thanks to its 1100x800 crusher is the ideal prerequisite for a specialized machine for professionals in quarries and recycling plants. This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing maximum profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest level of robustness against stresses. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The OLIMPO crusher certainly delivers convincing and unparalleled performance both in natural stone applications, in recycling, and in rental operations. Production capacity: approx. 360 tons/hour Patented HCS system Proportional valve with "Load Sensing" for optimizing the system and reducing fuel consumption by approx. 30%. Optional pre-screening Hydraulically adjustable crushing gap, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction system Tank pump Magnetic separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the system Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Two-deck vibrating screen 1020 x 2000 mm Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed, 82 hp/60 kW, emission stage V Control panel Tracked chassis 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction General condition: very good Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2025, machine/vehicle number: 997307957, Gasparin Jaw Crusher GI118C OLIMPO mobile jaw crusher on crawler tracks The sheer performance that the OLIMPO delivers, thanks to the 1100x800 crusher, makes it the ideal machine for professionals in quarries and recycling operations. This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing the highest profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest robustness against stress. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The OLIMPO crusher certainly offers convincing and unparalleled performance in applications involving natural stone, recycling, and rentals. Production output: approx. 330 tons/hour Patented HCS system Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption by approx. 30%. Optional pre-screen Crushing gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction Tank pump Magnetic separator Warranty: 1 year or up to max. operating hours from the start of operation of the plant Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Feed hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Grizzly feeder 970 x 3600 mm Hfedpfxehd Nabo Ap Een Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed 82 hp/60 kW, emission stage V Control panel Crawler tracks 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 180965471, Additional options and accessories Notes: Mobile impact crusher on crawler tracks The K1 impact crusher with crawler tracks, the newest addition to the product range, features an impact mill with a capacity of 250 t/h. It can be equipped with post-screening with recirculation in a closed circuit to perfectly calibrate the end product. It is valued for the excellent quality of the crushed product and also performs optimally in terms of operational efficiency. Production capacity: approx. 250 tons/hour Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Gap setting hydraulically adjustable, even during the crushing process. Quick locking system with wedges and tilting cylinders. Dust extraction system. Tank pump. Magnetic separator. Warranty: 1 year up to a maximum number of operating hours from the start of operation of the plant. Technical data: Impact crusher, type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20 mm only possible with the 3rd grinding track). Feed hopper, 4 m³ - 1800 x 3700 mm Grizzly feeder, 900 x 3400 mm Main conveyor belt, 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Control panel Crawler tracks, 400 x 2900 mm Weight: kg Transport length: 12560 mm Transport width: 2550 mm Transport height: 3200 mm Hfjdohd Naispfx Ap Een Further information: Intended use: Construction, Overall condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 499957954, Mobile impact crusher Gasparin GI1010CVR K1R on tracked chassis K1R machine with crawler undercarriage, the latest addition to the product range, featuring an impact mill with a capacity of 250 t/h. Can be equipped with a downstream screening system with return to the closed circuit to perfectly calibrate the final product. It is valued for the excellent quality of the crushed product and also performs optimally in terms of operational efficiency. Hfedpfx Apshd Nams Esn Production capacity: approx. 250 tons/hour Proportional distributor with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Clearance adjustable hydraulically, even during the crushing process. Fast locking system with wedges and pivoting cylinders. Dust extraction system. Tank pump. Magnetic separator. Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the plant. Technical data: Impact crusher, type M x 700 mm Crushing clearance from 30 (20) to 100 mm (clearance adjustment to 20 mm only possible with the 3rd grinding path). Feed hopper, 4 m³ - 1800 x 3700 mm Single-deck vibrating screen, 950 x 1500 mm Main conveyor belt, 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Control panel Tracked chassis, 400 x 3310 mm Weight: kg Transport length: 15400 mm Transport width: 2550 mm Transport height: 3300 mm Return system: single-deck screening machine 1200 x 2500 mm. Swiveling discharge conveyor belt under the screening machine for return to the circuit. Two-deck vibrating screen with conveyor belt for fine material. Further information: Intended use: construction industry, general condition: very good, technical condition: very good, optical condition: very good, transport dimensions (L x W x H): 15.4 x 2.55 x 3.3.

Condition: new, Year of construction: 2025, machine/vehicle number: 299477763, Mobile impact crusher on a tracked chassis The K1R impact crusher with crawler tracks is the latest addition to the product range, featuring an impact mill with a capacity of 250 t/h. It can be equipped with a downstream screening system with recirculation in a closed circuit to perfectly calibrate the final product. It is valued for the excellent quality of the crushed product and also delivers top performance in terms of operational efficiency. Production capacity: approx. 250 tons/hour Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approx. 30%. Gap setting hydraulically adjustable, even during the crushing process Hjdpfxjhd Naqo Ap Ejfn Fast locking system with wedges and pivoting cylinders Dust extraction Tank pump Magnetic separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the plant. Technical data: Impact crusher, type M x 700 mm Crushing gap from 30 (20) to 100 mm (gap adjustment to 20 mm only possible with the 3rd grinding track) Feed hopper 4 m³ - 1800 x 3700 mm Single-deck vibrating screen 950 x 1500 mm Main conveyor belt 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 hp / 60 kW, emission stage V Control panel Tracked chassis 400 x 3310 mm Weight: kg Transport length 15400 mm Transport width: 2550 mm Transport height 3300 mm Closed-circuit system: Single-deck screening machine 1200 x 2500 mm, pivoting discharge conveyor under the screening machine for recirculation into the circuit. Further information Application: Construction, Unladen weight: kg, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 648125409, FRUMECAR MODULMIX 3000 CONCRETE BATCHING PLANT Year: New Capacity: 120 m³/h - 4-5 aggregate hoppers / in-line arrangement - Hopper capacity: 60-120 m³ - Production capacity: 120 m³/h - Mixer type: twin-shaft mixer - Mixer size: 3.0 m³ / 4000 liters - K2 fully automatic computer system - Electric control system: Siemens S7 - Cement screw diameter: 273 mm - Cement silo: 1-4 - International assembly included - 2-year guarantee from startup - Winter housing possible This offer is subject to change, and may contain input errors or mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. More machines and mixing plants can be found on our website. Further information: Intended use: Construction industry Usable material: Concrete General condition: very good Technical condition: very good Optical condition: very good Hodpfxshd Na Re Ap Eofn

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, total width: 2,438 mm, total height: 2,896 mm, total length: 6,058 mm, overall weight: 3,300 kg, workpiece weight (max.): 5,000 kg, filter area: 40 m², tank capacity: 200 l, Equipment: lighting, We offer an absolute innovation! A high-quality high-cube container for both indoor and outdoor use. This container is made of durable Corten steel, ensuring a lifespan of at least 30 years. It is fully sealed, windproof, and waterproof. What’s included? ✔ Premium 200 pressure blasting unit with manual abrasive recycling, capable of processing and reusing all common reusable abrasives. ✔ Integrated filtration system inside the container (including impact pre-separator, connecting elements, etc.). ✔ Pre-installed electrical system and LED lighting for immediate use. Robust, safe, and ready for versatile applications! This unit is immediately operational and designed for various industrial uses. Transport Available Transport can be arranged upon request, with pricing based on daily rates. If you are interested or have any questions, feel free to contact me! For detailed information or a quote, please do not hesitate to reach out to me directly. I am happy to assist you! We also offer rent-to-own and leasing options for this sandblasting container. Hsdpfx Ajuiwu Hjp Eefn For inquiries or a price quote, please contact Mr. Andreas Wallner at any time.