Used Röders Tec Machining Center for sale (72,472)

Condition: used, x-travel 760 mm y-travel 410 mm Lasdpfxexxb I Dj Afkef z-travel 500 mm

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min Lodjyw Tm Espfx Afkeaf tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Lajdpozmvqvefx Afkjf Machining process: Drilling, Milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Grooving unit Number of grooving units: 1 Installation position: Top Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: BV 1174, Equipment: chip conveyor, Spinner VC 750 machining center, Laodpfx Afjzumbnekjf year of manufacture 2019 with Heidenhain control system, chip conveyor The machine can be purchased via an online insolvency auction on our website. You can access the auction by clicking on the link in the advertisement.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Ledpfozu Ixnox Afkeaf Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: used, Year of construction: 2024, x-travel 400 mm y-travel 400 mm z-travel 375 mm Laedpfxozvhm Ie Afksf control Siemens 840D sl Linear

Condition: used, Year of construction: 2007, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Ledpfxszvhmze Afkjaf

Condition: used, Year of construction: 2001, Expected!!! Laodpfxszvhmuj Afkef

Condition: used, Year of construction: 2001, - X = 2 x 2,400 - Y = 1,800 mm - Main spindle 12 kW - 18-position tool changer - Gluing unit with 6-position coil magazine Used CNC machining center Manufacturer: IMA Type: BIMA P 480 V, 180/480 Year of manufacture: 2001 Alternative processing: - X = 2 x 2,400 - Y = 1,800 mm - Main spindle 12 kW - 18-position tool changer - Gluing unit with 6-position coil magazine Working area: For standard machines, Y = 1,800 mm Changing table area for alternating machining: X = 2 x 2,400 mm / Milling and drilling Lsdszux Uaspfx Afkoaf X = 2 x 2,100 mm / Gluing CNC line control IMATRONIC NT 231 Automatic adjustment table with clamping plates Main spindle 12 kW With integrated C-axis, 360 degrees Automatic tool/adapter unit changer, 18-position 1 edge banding unit VT100 With glue application device Edge thickness: 0.4 - 3 mm For 4-sided edge banding and all-round edge banding with butt joint 6-position roller magazine 1 trimming unit 0.8 kW Including adapter unit - Saw, fixed at 90 degrees - Horizontal milling unit (corner release) - Chamfer milling unit - Straight milling unit - Profile drawing blade Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2020, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm Lasdpezux T Nsfx Afksf - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Ledpfxjzux Tpe Afkjaf Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Laedpfjzux Tiex Afkef Year of manufacture: 2008 Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Format4 Type: Profit H500S 16.56 Year of manufacture: 2016 Technical data Working area: X = 5540 mm Y = 1570 mm Z = 350 mm 5-axis main spindle Drilling head 12 vertical drilling spindles, 32 mm pitch 6 horizontal drilling spindles, 32 mm pitch, 4 in the X-axis and 2 in the Y-axis Dado head unit arranged in the X-axis Motor controlled via inverter up to 7,500 RPM 1 Becker vacuum pump 2 tool changers Laodpfx Ajzux Rbsfksf

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) Ljdpfx Aozux Nwjfksaf - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, Year of construction: 2005, CNC machining center Manufacturer: Homag Type: PROFI BOF 722/58/18/F/K Lasdpfx Aozux Imefkef Year of manufacture: 2005 Technical data - Machining area: X = 6000 mm / Y = 1800 mm / Z = 380 mm from the suction cup - 5-axis swivel head (replaced in 2019) - Rear spindle with Flex5 unit - 2 traversing tool changers with 18 positions each - Computer with Windows 10 (new 1.5 years ago) - Woodwop 8.1 - 2nd vacuum pump, can be switched on/off separately

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles Lsdpfozux Iasx Afkjaf 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Lajdpfxszux H Ao Afkof Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 30B.11.040.22, functionality: fully functional, TECHNICAL DETAILS Working area, X-axis: 3,300 mm Working area, Y-axis: 1,280 mm Working area, Z-axis: 250 mm Travel, X-axis: 4,000 mm Travel, Y-axis: 1,670 mm Travel, Z-axis: 500 mm Milling spindle Number of milling spindles: 1 Max. spindle speed: 24,000 rpm Main motor power: 11 kW Tool clamping system: HSK-F63 Table design: Cantilever table Table length: 3,300 mm Table width: 1,280 mm Material clamping: Pneumatic Drilling unit Drilling tools available Horizontal drilling spindles: 4 Vertical drilling spindles: 12 Tool changer positions: 12 MACHINE DETAILS Controlled axes: 4 Software: WoodFlash Voltage: 400 V Current consumption: 40 A Connected load: 18 kW Dimensions & Weight Dimensions (L x W x H): 6,250 x 3,494 x 2,300 mm Shipping dimensions (L x W x H): 5,300 x 2,350 x 2,400 mm Shipping weight: 4,000 kg Shipping packages: 2 EQUIPMENT Lajdozrmuvjpfx Afkjf Sawing unit Vacuum pump Becker PICCHIO 2200, year of manufacture 2022 Safety light curtain Manual control panel Tools CNC documentation with user keys/licenses and USB stick Documentation CE marking

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: AA10000992, functionality: fully functional, TECHNICAL DETAILS Table length: 5,020 mm Table width: 1,380 mm Working area X-axis: 5,020 mm Working area Y-axis: 1,300 mm Working area Z-axis: 250 mm Travel range X-axis: 5,400 mm Travel range Y-axis: 1,650 mm Travel range Z-axis: 450 mm Vector speed X/Y: 35 m/min Maximum speed X-axis: 25 m/min (?) Rapid traverse speed X-axis: 90 m/min (?) Maximum speed Y-axis: 90 m/min Maximum speed Z-axis: 30 m/min Lajdpfxozrmqkj Afkjf Number of milling spindles: 2 pcs. Tool clamping system: HSK-F63 Milling spindle 1 Controlled axes: 3 pcs. Spindle speed: 6,000–18,000 rpm Main motor power: 15 kW Milling spindle 2 Controlled axes: 3 pcs. Spindle speed: 600–24,000 rpm Main motor power: 12 kW Tool changer positions: 12 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 4,500 x 3,000 mm Total weight: 7,500 kg Machine control: KVARA Operating system: Windows Embedded Standard 7, 64-bit Processor: Intel Pentium, 2.9 GHz RAM: 8 GB DDR4 Hard disk storage: 500 GB, 7,200 rpm Software: XILOG MAESTRO / SCM Maestro Vacuum pump Manufacturer: Becker Number: 1 pc. Motor power: 5.5 kW Suction capacity: 250 m³/h Maximum vacuum pressure: 0.9 bar EQUIPMENT Sliding table 2 vacuum fields 2 reference cams 8 reference noses 8 supports Becker vacuum pump Safety bumper XILOG-MAESTRO software package CE marking

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AB/224221, functionality: fully functional, operating hours: 19,402 h, working width: 900 mm, milling spindle speed (max.): 18,000 rpm, working length: 3,050 mm, Equipment: CE marking, TECHNICAL DETAILS Working area, X-axis: 3,050 mm Working area, Y-axis: 900 mm Working area, Z-axis: 60 mm Controlled axes: 1 Milling spindle Number of milling spindles: 1 Max. spindle speed: 18,000 rpm Main motor power: 5.6 kW Tool clamping system: ISO 30 Table design: Flat table Table length: 3,960 mm Table width: 840 mm Material clamping system: Pneumatic Drilling unit Motor power: 2.64 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 11 MACHINE DETAILS Software: SCM Maestro Voltage: 400 V Current consumption: 35 A Fuse rating: 63 A Connected load: 10.0 kW Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 1,900 x 2,250 mm Transport dimensions (L x W x H): 2,500 x 1,900 x 2,250 mm Transport weight: 1,600 kg Transport packages: 1 Operating hours: 19,402 h Ledpfszrmn Nox Afkjaf EQUIPMENT Tools Documentation CNC documentation on USB stick User keys/licenses CE marking Saw unit Door interlock switch Safety light curtain Drilling tool

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 0-205-11-7632, functionality: fully functional, working width: 1,600 mm, milling spindle speed (max.): 30,000 rpm, working height: 535 mm, working length: 5,800 mm, TECHNICAL DETAILS Working area X-axis: 5,800 mm Working area Y-axis: 1,600 mm Working area Z-axis: 535 mm Number of milling spindles: 2 pcs. Milling spindle 1 Controlled axes: 4 pcs. Max. spindle speed: 30,000 rpm C-axis: Yes Milling spindle 2 Controlled axes: 4 pcs. Max. spindle speed: 30,000 rpm C-axis: Yes Table type: Beam table Table length: 2,500 mm Lodpfxjzrmnpe Afkjaf Table width: 1,500 mm Tool clamping system: HSK-F63 Tool changer slots: 36 pcs. Material clamping system: Pneumatic MACHINE DETAILS Software: WoodWOP Dimensions & Weight Installation dimensions (L x W x H): 12,200 x 9,000 x 3,500 mm Overall length: 26,000 mm Empty weight: 9,000 kg Transport packages: 8 pcs. Vacuum system Number of vacuum pumps: 2 pcs. Vacuum pumps: Elmo Rietschle 2BL2141 Connection diameter: 50 mm Voltage: 400 V Current consumption: 91 A EQUIPMENT Infeed and outfeed system Loading system Unloading system Labeling machine Hand control Chip conveyor Vacuum pumps Tools USB stick with CNC documentation CE marking Documentation Safety fence Door interlock switch Safety light curtain

Condition: used, Year of construction: 2019, CNC Machining Center FELDER FORMAT4 Profit H200 13.33 Year of manufacture: 2019 New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Technical specifications Spindle power: 12 kW Spindle speed: 24,000 RPM Additional information Laodpezuxi Rsfx Afkof Working area (maximum panel size) X: 3300 mm Y: 1280 mm Z-distance: 250 mm Spindle: Tool interface: HSK F63 Rated power at: approx. 12,000 RPM Cooling: Air-cooled Rotation: CW / CCW Tool magazine Linear tool magazine (mounted on the side): 12 positions Additional linear magazine on the gantry: 4 positions Max. tool diameter: 250 mm Max. tool length: 300 mm Drilling unit Model: DH 24 6H 2S Vertical spindles: 18 (12 in X, 6 in Y) Horizontal spindles: 6 (4 in X, 2 in Y) Max. drill length: 70 mm Max. tool diameter: 10 mm Dadoing machines: 2 (X and Y) Max. saw blade diameter: 120 mm Max. speed: 6,000 RPM Vacuum table 6 supports (instead of 4) Two-circuit vacuum system Height of vacuum cups: 100 mm Pneumatic support locking Adjustable side stops (Y-axis) Axis system X-axis: Rack and pinion drive Y/Z-axis: Ball screw drive Linear guides in all axes Automatic central lubrication Control and software CNC control with CAD/CAM software 3D simulation preview DXF import capability Parametric programming Remote maintenance package (internet-enabled)

Condition: used, Year of construction: 2025, table length: 3,100 mm, table width: 2,100 mm, Technical data - Table size: 3100 x 2100 mm - 4-axis main spindle - Linear tool changer, 16 positions - 2 vacuum pumps Lodpfxszuw Tzj Afkeaf - 12 vertical drilling spindles - 1 dado blade

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction Lsdpjzuw Rtsfx Afkeaf - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Lasdpfx Afezuw H Isksf Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours