Used Power Resistance for sale (37,689)

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Isdpsy R Npiefx Aagjat Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, OKUMA POWER SUPPLY 5000T Iodpfx Asy Suyveagsat E0451-521-038 . 03487

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit DEVELOPMENT OF GSG ROBOTICS Iaodpjyl Avwofx Aagot GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, power: 215 kW (292.32 HP), fuel type: diesel, first registration: 05/2018, Year of construction: 2017, operating hours: 12,770 h, Used Liebherr L576 X Power wheel loader – Total weight 29,000 kg – Operating hours 12,776 – Engine 215 kW – Speed 40 km/h – Axle load distribution 15,500 kg – = Further Information = Engine displacement: 10,520 cc Unladen weight: 29,000 kg Gross weight: 29,000 kg CE marking: yes Reference number: 93 Serial number: VATZ1333LZB046212 Please contact Miguel Cubas for further information. Iaodpfx Aaey Sv Hwjget = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic Isdpfx Aeu R Sy Ajagjat - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Year of construction: 2025, condition: used, New: Yes Empty weight: 10.000 kg Dimensions of cargo space: 400 x 210 x 210 cm Iasdpfx Aev Th H Hjagot Serial number: 2411167 Please contact Team DPX for more information

Year of construction: 2025, condition: used, New: Yes Empty weight: 690 kg Iaedpjxuzucsfx Aagot Dimensions of cargo space: 194 x 145 x 144 cm CE mark: yes Please contact Team DPX for more information

Year of construction: 2025, condition: used, New: Yes Empty weight: 2.250 kg Dimensions of cargo space: 245 x 140 x 200 cm CE mark: yes Ijdoxuzupspfx Aagsat Serial number: 2002005 Please contact Team DPX for more information

Year of construction: 2025, condition: used, New: Yes Iedpfsvxdx Ajx Aageat Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information

Year of construction: 2025, condition: used, New: Yes Empty weight: 35 kg Iajdexdhfgopfx Aagot Dimensions of cargo space: 54 x 29 x 58 cm CE mark: yes Serial number: 25050168 Please contact Team DPX for more information

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Iaodpfx Aaol Nbqcsgot Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators Ijdpfxev Ev Dqj Aagsat - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 174146, fuel type: gas, color: blue, power: 10,000 kW (13,596.20 HP), nominal power: 10,000 kW (13,596.20 HP), nominal power (apparent): 12,163 kVA, 10MW Wärtsilä AMG Gas Power Plant with Heat Recovery Primary Power Generation: Wärtsilä W20V34SG Gas Engine - Output: 10,000 kW (10 MW) Iedpfsygx Tzox Aageat - Configuration: 20‑cylinder, spark‑ignited gas engine - Fuel: Natural gas - Year: 2013 Electrical Generation: AMG 1120LT08 DSE Generator - Rating: 12,163 kVA - Year: 2013 Heat Recovery System: Cochran Waste Heat Boiler - Thermal Output: 17,500 kW - Year: 2013 Cochran Economiser – Waste Heat Recovery Unit - Thermal Output: 2,719 kW - Year: 2013

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation Iasdpfxeit Rq Hs Aagst - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module Isdpfx Aajhpf Iyogsat - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Iaedpfxjycv Sae Aagst Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, Various pistons / cylinders available. Isdjy R Nu Eepfx Aageat Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, Year of construction: 2018, machine/vehicle number: 213357, Own weight: 710 kg, Power: 20 kVA Iaedpfx Aoy Rvrkoagot

Condition: excellent (used), Year of construction: 2008, operating hours: 8,948 h, functionality: fully functional, spindle speed (max.): 9,500 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 660 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 4,500 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, grinding spindle motor power: 11,500 W, input voltage: 400 V, year of last overhaul: 2026, CNC Tool grinding machine WALTER Helitronic Power TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC Series 31i-model A5 Software installed: Tool Studio 3 Number of axes: 5 Height of centers: 145 / 190 [mm] Stroke X axis: 470 [mm] Rapid traverse rate X axis: 15000 [mm/min] Stroke Y axis: 330 [mm] Rapid traverse rate Y axis: 15000 [mm/min] Stroke Z axis: 660 [mm] Rapid traverse rate Z axis: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Max. grinding wheel speed: 9500 [rpm] Grinding spindle motor power: 11.5 [kW] Max. diameter grinding wheel: 200 [mm] Number of hours under power: 8948 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 120 [l/min] Lubrication tank capacity: 400 [l] Supply voltage: 400 [V] Total power required: 25 [kVA] Weight: 4500 [Kg] INCLUDED EQUIPMENT: x1 TOOLSTUDIO 3 software x1 direct-drive A axis (Hollow Shaft) Ijdpfx Aaoy Sxrpegsat x1 automatic tool clamping system x1 RENISHAW LP2 part probe x1 DSL Air Technology type AES-GAMMA 30 mist extractor x1 lubrication tank + paper filtration system x1 GRUNDFOS coolant pump x35 grinding wheel holders (equipped with CBN wheels) x22 ISO50 attachments x1 SCHUNK collet holder x22 collets x1 NIKKEN collet holder x13 NIKKEN collets x1 metal rack for grinding wheel holders and ISO50 attachments 1x ISO50 calibration mandrel intended for axis calibration 1x calibration disc intended for axis calibration x1 set of service wrenches Various technical manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Machine similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinding machines, lathes, machining centers, and milling machines.

Condition: ready for operation (used), AGIE PMO-03 A Power Module Output 616021.2, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Iedpfx Aoi D Txijagoat

Condition: new, Siemens 6RA4001-1AA01 Simodrive Power Supply < unused > in opened original packaging, 100% functional. Iaedpfx Aoxagwasagjt

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo Power Supply, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Ijdji Ebrgjpfx Aagjat

Condition: ready for operation (used), Bosch NT600 Power Supply . Power supply , used, normal signs of wear, 100% functional, scope of delivery as per photos Iasdpfxoi D Uayo Aagjt

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, display foil damaged (see photo 2), otherwise normal signs of use, 100% functional, scope of delivery as per photos Iaodpfei D Uh Iox Aagot

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Iodoy Nrynepfx Aagjat