Used Omega 123G for sale (132)

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle Nodpfewx Dctex Amnect * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: excellent (used), Year of construction: 2020, PR9000 pallet racking for 36 Euro pallets This pallet racking is tested with a maximum load of 2,200 kg per beam level in accordance with DIN EN 15512 and therefore has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned parallel to each other Made of solid, high-quality steel for extreme robustness. Withstands high loads of up to 9,000 kg per bay without any problems High-quality workmanship of the entire pallet rack Plenty of storage space thanks to the 3 levels and 3 bays Eye-catching blue and orange color scheme for maximum safety Upright profile: Height: 5500 mm Material: S-355 JR steel Dimensions: 80 W x 70 D x 1.5 Perforation: 50 mm (grid - offset) Surface: Powder-coated blue Profile structure: Omega profile shape Depth: 1100 mm Manufacture: Cold-rolled profile Bay load: 9000 kg Crossbars: Njdpjv Hp Tuefx Amnoct The height of the cross beams can be individually adjusted in 50 mm increments Total load capacity per truss level 1800 mm truss: 2000 kg 2700 mm truss: 3000 kg 3600 mm truss: 2200 kg Material Steel S-235 JR (cold-rolled steel) Profile structure: Rectangular profile Fastening: Hook lugs on each side of the crossbeam for hooking in, secured with locking pin Finish: Powder-coated orange Manufacture: Beveled sheet steel Scope of delivery 04 x PR9000 upright 5.5 m high / 110 cm deep Bay load: 9,000 kg 18 x Cross beam PR9000 3600 cm wide incl. locking pins, shelf load: 2200 kg 09 x push-through protection PR9000 3600 mm Year 2020-2022 You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2023, 19-meter AR Racking pallet rack AR Racking pallet rack with a total length of 19,000 mm, consisting of one base bay and six extension bays (2,700 mm each). Each bay has three levels (including floor storage space) with four cross beams (2,700 mm). Each bay can store 3 Euro pallets side by side and 3 pallets stacked (including floor storage space). One bay can accommodate 9 Euro pallets. Manufacturer: AR Racking Type: ARPA-S Total length: approx. 19,000 mm Shelf height: 3,000 mm Shelf depth: 1,100 mm Clear bay width: 2,700 mm Grid spacing: 50 mm End upright frame height: 500 mm Number of storage levels: 3 (including floor storage space) Number of bays: 7 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 63 Year of construction: 2023 Uprights The frames consist of two omega profiles with their corresponding connectors, post feet, and fastening materials. The horizontal and diagonal struts are made of galvanized C-profiles. The perforation The omega profile has a 50 mm spacing for the crossbeams. Sendzimier-galvanized material Crossbeams Made of cold-rolled box profile Sturdy suspension bracket for a secure connection Including two locking pins per crossbeam to prevent accidental removal Powder-coated orange Scope of delivery: 6 x AR Racking pallet rack uprights, galvanized, 3000 x 80 x 70 mm 2 x AR Racking pallet rack uprights, galvanized, 3500 x 80 x 70 mm (end upright frame height: 500 mm) 28 x AR Racking pallet rack crossbeams, orange, 2700 x 160 x 50 mm 56 x Locking pins We also offer the shelf in a smaller version. Please feel free to contact us. You can find more items - new and used - in our shop! Ncodpfxsxq A Dwj Amnjt International shipping costs upon request!

Condition: excellent (used), Year of construction: 2020, PR9000 pallet racking for 42 Euro pallets This pallet racking is tested with a maximum load of 2,200 kg per beam level in accordance with DIN EN 15512 and therefore has a maximum bay load of 9,000 kg and can be loaded with 550 kg per pallet. The push-through protection prevents stored goods from slipping through when shelves are positioned parallel to each other Made of solid, high-quality steel for extreme robustness. Withstands high loads of up to 9,000 kg per bay without any problems High-quality workmanship of the entire pallet rack Plenty of storage space thanks to the 2 levels and 4 bays Eye-catching blue and orange color scheme for maximum safety Upright profile: Height: 5000 mm Material: S-355 JR steel Dimensions: 80 W x 70 D x 1.5 Perforation: 50 mm (grid - offset) Surface: Powder-coated blue Profile structure: Omega profile shape Depth: 1100 mm Manufacture: Cold-rolled profile Bay load: 9000 kg Crossbars: The height of the cross beams can be individually adjusted in 50 mm increments Total load capacity per truss level 1800 mm truss: 2000 kg 2700 mm truss: 3000 kg 3600 mm truss: 2200 kg Material Steel S-235 JR (cold-rolled steel) Profile structure: Rectangular profile Fastening: Hook lugs on each side of the crossbeam for hooking in, secured with locking pin Finish: Powder-coated orange Manufacture: Beveled sheet steel Scope of delivery 05 x PR9000 upright 5 m high / 110 cm deep Bay load: 9,000 kg 12 x PR9000 spreader beam 3600 cm wide incl. safety pins, shelf load: 2200 kg 04 x cross beam PR9000 1800 cm wide incl. safety pins, shelf load: 2000 kg 06 x Push-through protection PR9000 3600 mm 02 x Push-through protection PR9000 1800 mm Year 2020-2022 You can find more items - new and used - in our store! Nedpfxsv Hpz Eo Amnect International shipping costs on request!

Condition: new, maximum load weight: 35,442 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 16,550 mm, loading space width: 2,500 mm, loading space height: 1,350 mm, total width: 2,540 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Maxima extendable telescopic heavy-duty platform semi-trailer Immediately available TECHNICAL INFORMATION: - Fifth wheel height: 1,250 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 9,100 mm - Extension: up to 7,450 mm platform extension - Extension locking position: 500 mm - Gooseneck height: 180 mm - Wheelbase: 8,130 mm - Axle spacing between 1st and 2nd axle: 1,360 mm - Axle spacing between 2nd and 3rd axle: 1,810 mm - Technical axle load capacity: 9 tonnes - Technical total axle load: 27,000 kg - Kingpin load capacity: 18,000 kg technical - Total width: 2,540 mm - Technical gross weight [80 km/h]: 45,000 kg - Technical gross weight [60 km/h]: 46,000 kg - Unladen weight ±3%: approx. 9,558 kg - Rear swing doors: 2,450 mm RUNNING GEAR: - Number of axles: 3 pieces - BPW axles with air suspension and disc brakes - The two front axles are fixed and the rear axle is steerable - Air suspension incl. 1 load gauge - Manually controlled lift axle for overloading protection (1st axle) - Wabco EBS 4S/3M braking system - Electro-pneumatic dual-circuit ABS system - Lighting system: 24V with 2 x 7-pin + 1 x 15-pin sockets - Tyres: 6 x 385/65 R 22.5 CHASSIS: - Chassis made of high-grade, high-strength S700 MC steel, according to ISO 1726 - 2 mm Omega-profile reinforced 30 mm hardwood floor - 2" kingpin with bolted connection - Mechanical telescopic landing legs at front, wind-up type, with 50 tonnes static capacity LOAD SECURING: - Lashing rings - Stake pockets - Detachable stanchions - Container locks suitable for 1x20 ft., 2x20 ft., 1x40 ft., and 1x45 ft. containers - Front wall made of steel, 1,500+500 mm high, with Code XL certification ACCESSORIES: - 1 stainless steel toolbox, dimensions: 1,000 mm x 500 mm x 500 mm (W x D x H) - Standard access ladder - Side underrun protection made of steel, according to Regulation 89/297/EEC - Stanchion box: 6 pcs, mounted to front plate - 2x2 oversize load signs with LED lighting - Rotating beacon COLOURS: - Chassis colour: RAL 3020 traffic red Nodpelz Hliofx Amnoct For further information, please do not hesitate to contact us.

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides Nsdjxgk U Njpfx Amnect * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” Ncjdpow U H Sbofx Amnot * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice Nodpfowx Dbpox Amnsct - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Ncjdpfjugqvfox Amnst Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 63900 € 1207.71 € 4200 mm 1.5 mm 1 mm 2 mm Motorisch 5450 mm 2200 mm 1900 mm 5350 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Ncedpfxjwirrqs Amnot Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 53600 € 1013.04 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm 3800 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Nsdpjwiq E Nefx Amnjct Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: used, Year of construction: 1996, Haarup planetary mixer with skip hoist and traks. Ideal for face-mix in paving block production or for the face-mix concrete layer. Ncedpoyyl Adjfx Amnst Dismantled, ready for loading.

Condition: used, Year of construction: 2001, Techmatic circulation system: - elevator - lowerator - finger car turning - 16 floors double pallet 1400x1100 - cuber Ncsdpfx Amjyylr Senet - doubler - center year 2001

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical data: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Total width: 2,550 mm * Technical total weight [80 km/sa] 45,000 kg * Technical total weight [60 km/h] 46,000 kg * Empty weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle can be lifted Ncjdpfx Amjrukt Rsnst * Wabco braking system * Tires 445/45/R 19.5 Chassis: * Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Support winch at the front, foldable supports at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Ramp storage box at the rear Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 pcs. container locks * Front wall made of steel material with a height of 1,500 mm with Code XL certificate Accessories: * 1x stainless steel tool box * Stake box Chassis color: RAL 3020 traffic red We are happy to provide you with further information

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 27.2 kW (36.98 HP), type of input current: three-phase, type of cooling: air, overall weight: 550 kg, input voltage: 400 V, total width: 860 mm, total length: 1,670 mm, total height: 1,800 mm, warranty duration: 6 months, Aircooled chiller TECHNOTRANS OMEGA K 340L 27.2 KW Cooling capacity: 27.2 kW / 7.73 tons (14/19 — 32°C) Year of manufacture: 2025 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Panasonic C-SCN903H8K (scroll) Type of refrigerant: R513а Number of fans: 1 pcs. + 1 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos CM10-3 A-R-I-V-AQQV J-A-A-N, buffer tank. Dimensions: 1.67x0.86x1.8 m. Weight: 550 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Ncodpfoxyw Ipjx Amnet Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 55 kW (74.78 HP), type of input current: three-phase, type of cooling: air, overall weight: 700 kg, input voltage: 400 V, total width: 860 mm, total length: 1,670 mm, total height: 1,800 mm, warranty duration: 6 months, Aircooled chiller TECHNOTRANS OMEGA K 400L 55 KW Cooling capacity: 55 kW / 15.64 tons (13/18 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos MG100LC-F-H3-CML3A, buffer tank. Dimensions: 1.67x0.86x1.8 m. Weight: 700 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Njdpfxoyt H Akj Amnjct

Condition: like new (used), Line for cleaning and drying (roasting) sesame seeds, pumpkin seeds, coffee seeds etc. Machine: throughput 15-30 t/h cyclone filter with pre-screen and descaling agent chaff silo Nsdpfeyycukox Amnoct fluid bed dryer final cleaning of seeds using the Storex Z+ optical sorter Perfect condition!

Condition: used, HESS RH500 1998r control panel 2 moulds hydraulics conveyor Nedpfxoyx Hx Rs Amnsct

Condition: new, maximum load weight: 22,800 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,535 mm, loading space width: 2,472 mm, loading space height: 2,970 mm, loading space volume: 99 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, Talson Clothing Mega Box Trailer TGG TAL 12/18 ▸ 33 Pallets ▸ LED ▸ Code XL General Information: Ncsdpfx Asxrwzgsmnot For sale is a Talson Clothing Mega Box Trailer TGG TAL 12/18, renowned for its robust yet lightweight aluminum construction. Ideally suited for textile transport or high-volume goods. Premium craftsmanship, modern features, factory-new condition. Technical data * Vehicle type: TGG TAL 12/18 * Brand: Talson * Country of registration: Germany * Unladen weight: approx. 7,200 kg (+/?3 %) * Gross weight: 30,000 kg * Axle load: 18,000 kg * Kingpin load: 12,000 kg * Internal height: 2,970 mm * Internal length: 13,535 mm * Internal width: 2,472 mm * Overall height: 4,030 mm * External length: 13,710 mm * Volume: 99 m³ * Pallet capacity: 33 Euro pallets Chassis & Braking System * Chassis: Semi-chassis in high-tensile ST52 steel * Axles: 2x BPW brand axles * Braking system: Disc brakes with Wabco EBS 2S/2M, ABS & RSS * Tire size: 445/45 R19.5 (premium tires, M+S rated) * Wheels: Steel rims, offset * Spare wheel: included * Technical support legs: 24 t load capacity Body * Self-supporting aluminum sandwich construction * Corrosion-resistant exterior walls made from pre-painted aluminum sheets * Interior lining in galvanized aluminum * Roof: 23 mm thick, fiberglass-reinforced with 4 LED roof lights * Rear double-wing doors with lock * Front wall: 1.5 mm aluminum with Omega profiles (impact-resistant) * 13 lashing rings according to EN 12640 * Rear ramp with dual ramp bearing * Customs sealing available Equipment & Extras * Lighting: * Aspöck Europoint 3 taillights * 4x LED front position lights (white) * 2x LED high-mounted rear lights (red) * 4x LED side marker lights (orange) * 2x license plate lights * Toolbox: Plastic, 400×480×600 mm * Ramp holder: right side, size 4470×1200 mm * Underrun protection: aluminum, compliant with UN ECE R58.3 * Mudguards: anti-spray, compliant with EU 109/2011 * Side marking: reflective, compliant with UNECE R48 * Access ladder: foldable at the rear * Load securing: Code XL (EN 12642) * Certificate: DVZ 2010 Colors & Materials * Body: RAL 9016 Talson white * Rear doors: RAL 9016 Talson white * Chassis: hot-dip galvanized, corrosion-protected * Interior lining: white * Profiles: anodized aluminum Features ▸ 33 Euro pallet spaces ▸ Lightweight, robust aluminum construction ▸ Complete LED lighting package ▸ Load securing certificate Code XL ▸ High-quality BPW axles ▸ Ramp holder ▸ Immediately operational For further information, feel free to contact us.

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Ncjdpfxerukuco Amnot Technical specifications: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Wheelbase: 1,360 mm * Overall width: 2,550 mm * Gross vehicle weight [80 km/h] 45,000 kg * Gross vehicle weight [60 km/h] 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * 3rd axle as self-steering axle * Wabco braking system * Tires: 445/45/R 19.5 Chassis: * Chassis made of high-quality, high-strength S700 MC steel, in accordance with ISO standards 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Front landing gear, folding outriggers at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Rear ramp storage box Load securing: * Lashing rings * Stake pockets * 6 x 2 container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 container locking devices * 1,500 mm high steel bulkhead with Code XL certification Accessories: * 1x stainless steel toolbox * Stake box Chassis color: RAL 3020 Traffic Red We are happy to provide you with further information.

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical data: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Total width: 2,550 mm * Technical total weight [80 km/sa] 45,000 kg * Technical total weight [60 km/h] 46,000 kg * Empty weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle can be lifted * Wabco braking system * Tires 445/45/R 19.5 Chassis: * Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Support winch at the front, foldable supports at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Ramp storage box at the rear Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 pcs. container locks Ncodjrukurepfx Amnet * Front wall made of steel material with a height of 1,500 mm with Code XL certificate Accessories: * 1x stainless steel tool box * Stake box Chassis color: RAL 3020 traffic red We are happy to provide you with further information

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT45001013946, empty load weight: 12,100 kg, maximum load weight: 37,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 01/2025, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 3,200 mm, total length: 13,750 mm, total width: 2,550 mm, total height: 4,070 mm, suspension: air, tire size: 205/65 R 17,5 ", maximum speed: 90 km/h, color: blue, Year of construction: 2024, Equipment: tail-lift, The images shown are archive photos; the vehicle may still be in use! Jumbo Low Loader Chassis for construction machinery transport up to 36,000 kg and a maximum external machine width of 2,500 mm. Fifth wheel plate with replaceable 2" king pin. Rear slope approximately 1,500 mm long at 7°. Ramp shaft closed at top with steel/checker plate. Trailer B-dimension: 12,000 mm Free rear swing radius approx.: 2,350 mm Spare wheel carrier with 1 spare wheel Plastic toolbox In the low-bed: Omega rail laterally below the outer frame as a lashing bar for tarpaulin and spacer holders for lashing pins, not within the wheel area. Lashing Points: Gooseneck: - 5 pairs of lashing points recessed in outer frame, each rated at 5 t - 2 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t Low-bed: - 7 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t - 9 pairs of lashing points recessed in outer frame, each rated at 5 t - 3 pairs of additional folding lashing points recessed in the low-bed floor, each 10 t (1x before the drop, 1x in front of the 1st axle, 1x behind the 3rd axle) Axles & Suspension: - Drum brake axles - Last 2 axles self-steering - Air suspension with lift & lower valve + auto-reset function - Raise & lower function with quick release Njdpeylkywsfx Amnjct Wheels and Tires: - 205 / 65 R 17.5 for 8,000 kg axle load technical max. at 90 km/h - Steel rims twin arrangement Brake System: - 2-line air brake system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at front, without connecting line - Knorr EBS Electrics: - 2 pairs of double LED warning panels, extendable - 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front - 24 Volt, multi-chamber LED lights - Flashing side marker lights - Beacon with holder - Interior LED work light on front wall - 2 additional LED work lights at rear, switched via reversing light Floor: - Floor designed for maximum forklift axle load of 10,000 kg at minimum 300 mm tire width (note: deformation possible!) Stakes: - 3 pairs of sliding stakes, movable along entire length, with four insert sockets each; only the rear 2 zones are of equal length! - Stake positions: 1x gooseneck, 3x in low-bed Insert Slats: - 5 rows of wooden insert slats Access Ramps: - Ramp surface with "Mega Grip" serrated grating (max. forklift axle load 9,000 kg at min. 200 mm tire width) - Hydraulically operated via independent electric unit installed in stainless steel box front-right, including ramp control; additional operation via radio remote control incl. rear support operation, customer's responsibility! NATO socket on truck required, including connecting line to truck as spiral cable; connection line must NOT be connected while driving! Truck not included. - Steel ramp full width, approx. 3,300 mm long + 3-part aluminium foldable section approx. 900 mm for total ramp length 4,100 mm; if necessary, additional phenolic board max. 9 mm thick under aluminium sections for reduced ramp angle; ramp load capacity 26,000 kg, heavy-duty version; over ramp shaft steel/checker plate; ramp secured during transit with top link. Exact specification available on request!

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine Njdpelbilvofx Amnect • fast processes as in the case of MAX and MAB machines • maximum free space for material bending thanks to the F-geometry for the bending beam • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/100 mm and 24/100 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/68 mm and 24/68 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length Ncsdpfjlbimasx Amnjt

Condition: used, Production boards Wasa Uniplast 1250x850x45 1700pcs price: 17 euro pcs Ncsdpjyxf S Aefx Amnst