Used Okuma Mb-46Vae for sale (3,096)

Condition: like new (used), Year of construction: 2022, operating hours: 521 h, functionality: fully functional, machine/vehicle number: L3M0474, turning length: 500 mm, turning diameter: 300 mm, total height: 2,210 mm, total length: 3,950 mm, total width: 2,260 mm, overall weight: 5,680 kg, Equipment: documentation/manual, NEW PRICE!! Used Okuma lathe Like-new, well-maintained condition 521 operating hours 347 spindle hours Rodpfx Amoy Rx Tdskscd

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 380 mm, controller manufacturer: OKUMA, controller model: OSP‑P200LA‑R, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details. • Turning configuration: 2 axes (X, Z) + C‑axis; no Y‑axis • Tailstock: Equipped • Tool presetter: Automatic tool presetter installed • Turret: 12‑station turret with driven tools (milling and drilling on C‑axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2‑6 • Spindle bore diameter: approx. 50 mm • Electrical supply: 380 V, 3‑phase, 50/60 Hz • Average apparent power: 17.7 kVA Rjdpfx Amoy Rrwvekscd • Full‑load current: 26.7 A • Max. motor current draw: 45 A Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,600 mm, conveyor belt width: 600 mm, discharge height: 1,000 mm, Equipment: documentation/manual, type plate available, L=360cm Rodpfxsyf Nk Ie Amkjcd W=60cm H=100cm

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Redpfx Ajzghc Domkocd Portal loader Fastem / Fanuc.

Condition: used, mileage: 1,001 km, gearing type: other, color: black, empty load weight: 820 kg, first registration: 01/2019, Year of construction: 2019, driver cabin: other, Vehicle location: Bovenden, Rodpfxoi Rp H Te Amkjcd Capacity approx. 0.5 m³, operating pressure >200 bar! The MB-HDS shaft separator is a true all-rounder! With a single device, you can process various materials; all you have to do is change the shafts. For more information about the product, please contact us! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to change, interim sale, and errors.

Condition: used, Technical details: turning diameter over bed: 460 mm turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm Rodpswa Nwfofx Amkjcd tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 500 mm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details. • CNC: OSP U100L • Max turning diameter: 340 mm • Max turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increment) • Rapid feed: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm • Live tooling: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Rcsdpfey N Sabex Amksd Additional equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blow • Turning tool holder kit • 4 radial live tools • 4 axial live tools Technical Specification Taper Size VDI 40 Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t Rjdpfxjh D Anas Amkocd +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2011, functionality: fully functional, Description: Rcsdpfx Amsy Ehaijkod The machine is in good technical condition, with testing possible by prior arrangement. Control system: OKUMA OSP-P200MA. Power consumption: 58 kVA. Travel distance in X-axis: 1000 mm, Y-axis: 900 mm, Z-axis: 1000 mm. Description: 4 axes. Weight: 26 t. Footprint: 3.3 x 6.5 m. Tool magazine capacity: 100. Tool clamping system: BT50. Machine parameters: Travels in X, Y, Z axes: 1000 x 900 x 1000 mm.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,563 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 900 kg, overall weight: 7,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details. Rcsdey Nb T Djpfx Amkod • Table size: 1300 × 560 mm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P200M, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details. • Table size: 1000 × 460 mm Technical Specification Taper Size BT 40 Rcodpsy Nb Nxefx Amksd

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,723 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,140 mm, spindle motor power: 22,000 W, overall weight: 6,000 kg, controller manufacturer: OKUMA, controller model: OSP-P300, number of axes: 3, This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details. • Chuck size: 203 mm • Max. turning diameter: 300 mm • Max. turning length: 450–520 mm (up to 1000 mm optional) • Z-axis travel: 450–1140 mm • Spindle bore: 65 mm • Turret: 12 stations • Tool type/interface: VDI / BMT • C-axis: Yes Technical Specification Counter Spindle No Driven Tools Yes Redpfx Amjy I Uu Eokocd

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 0607.1447, turning diameter over cross slide: 340 mm, turning length: 520 mm, turning diameter: 530 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance Y-axis: 260 mm, travel distance Z-axis: 520 mm, spindle motor power: 15,000 W, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,750 mm, total length: 3,000 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 5,000 kg, Equipment: documentation/manual, Control: OKUMA OSP5020L 12 tools Rcsdoy Stxqepfx Amksd Automatic chip conveyor

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 Rodpfoy R A N Aox Amkecd No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2011, conveyor belt length: 3,100 mm, conveyor belt width: 900 mm, discharge height: 1,000 mm, Equipment: documentation/manual, type plate available, MB Conveyors PA ALL (2011) L=310cm Rcjdpfeyf Ndzex Amkod W=90cm H=100cm

Condition: like new (used), Bosch. U-MB 1000Kg/h Loos 10Bar. Redpfsu I Ru Hsx Amkjcd

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C axis, Counter spindle with C axis, Rjdpfoy Uhccsx Amkocd Y-axis slide above / milling spindle, HSK 63 tool holder, Infinitely adjustable B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Lower turret with 12 tool positions and powered tools, Interlite compact filter system 900 l, Extraction system, Spindle running time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure cooling, WZG measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ Rcjdex D S Ekopfx Amkod • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 10125101, turning diameter over cross slide: 340 mm, turning length: 1,000 mm, turning diameter: 595 mm, spindle bore: 64 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, Equipment: bar feeder, chip conveyor, documentation/manual, Machined had crash 1 year ago. It was repaired by Okuma service. Changed new bed, ball srew, all original bearings, revolver repair. But main spindle runout is ~0,3mm and this was not fixed. Machine after repair was all time operational state. It could manufacture simple parts. Drill, thread, turn nice from bigger dimensions. But manufacture precise parts need additional repair of spindle to fix runout. Together with tool holders 20-30+ and chuck jaws 30+ . There are 3 active tools milling/drilling 90deg Also mist separator Rjdpfszlarhsx Amkocd And bar feeder or 4000mm lenth Chip conveyor

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,669 h, functionality: fully functional, # OKUMA GENOS M460-VE-e – 2019 1669 H WORKING HOURS ONLY ## Műszaki adatok * Géptípus: CNC függőleges megmunkálóközpont * Gyártási év: 2019 * Vezérlés: OKUMA OSP-P300MA-e * X-tengely út: 762 mm * Y-tengely út: 460 mm * Z-tengely út: 460 mm * Asztalméret: 1000 × 460 mm * Maximális asztalterhelés: 700 kg * Orsókúp: BT40 * Maximális főorsó fordulatszám: 15 000 ford/perc * Főorsó teljesítménye: 22 / 18,5 kW (30 perc / folyamatos) * Gyorsjárat: X/Y 40 m/perc, Z 32 m/perc * Maximális előtolás: 32 m/perc * Szerszámtár: 32 férőhelyes automata szerszámcserélő * Maximális szerszámátmérő: 80 mm (125 mm szomszédos hely kihagyásával) * Maximális szerszámhossz: 300 mm Rjdpfozkwibex Amkocd * Maximális szerszámtömeg: 8 kg * Orsóorr – asztal távolság: 150–610 mm * Gép tömege: kb. 6500 kg * Méretek (H × Sz × M): kb. 2805 × 2200 × 2746 mm ## Tartozékok / Felszereltség * 32 férőhelyes automata szerszámcserélő * Hűtőfolyadék-rendszer * Automatikus központi kenés * Merev menetfúrás * Thermo-Friendly Concept hőkompenzáció * Teljes munkatérburkolat forgácskihordó # OKUMA GENOS M460-VE-e – 2019 ## Technical Specifications * Machine type: CNC Vertical Machining Center * Year of manufacture: 2019 * Control: OKUMA OSP-P300MA-e * X-axis travel: 762 mm * Y-axis travel: 460 mm * Z-axis travel: 460 mm * Table size: 1,000 × 460 mm * Maximum table load: 700 kg * Spindle taper: BT40 * Maximum spindle speed: 15,000 rpm * Spindle motor power: 22 / 18.5 kW (30 min / continuous) * Rapid traverse: X/Y 40 m/min, Z 32 m/min * Maximum cutting feed: 32 m/min * Tool magazine: 32-position automatic tool changer * Maximum tool diameter: 80 mm (125 mm with adjacent pockets empty) * Maximum tool length: 300 mm * Maximum tool weight: 8 kg * Spindle nose to table: 150–610 mm * Machine weight: approx. 6,500 kg * Dimensions (L × W × H): approx. 2,805 × 2,200 × 2,746 mm ## Standard Equipment * 32-position automatic tool changer * Coolant system * Automatic central lubrication * Rigid tapping * Thermo-Friendly Concept * Full machine enclosure chip conveyor # OKUMA GENOS M460-VE-e – Baujahr 2019 ## Technische Daten * Maschinentyp: CNC-Vertikalbearbeitungszentrum * Baujahr: 2019 * Steuerung: OKUMA OSP-P300MA-e * X-Achsen-Verfahrweg: 762 mm * Y-Achsen-Verfahrweg: 460 mm * Z-Achsen-Verfahrweg: 460 mm * Tischgröße: 1.000 × 460 mm * Maximale Tischbelastung: 700 kg * Spindelaufnahme: BT40 * Maximale Spindeldrehzahl: 15.000 U/min * Spindelleistung: 22 / 18,5 kW (30 Min. / Dauerleistung) * Eilgang: X/Y 40 m/min, Z 32 m/min * Maximaler Vorschub: 32 m/min * Werkzeugmagazin: 32-fach ATC * Maximaler Werkzeugdurchmesser: 80 mm (125 mm bei freiem Nachbarplatz) * Maximale Werkzeuglänge: 300 mm * Maximales Werkzeuggewicht: 8 kg * Abstand Spindelnase – Tisch: 150–610 mm * Maschinengewicht: ca. 6.500 kg * Abmessungen (L × B × H): ca. 2.805 × 2.200 × 2.746 mm ## Standardausstattung * 32-fach Werkzeugwechsler * Kühlmittelanlage * Automatische Zentralschmierung * Starrgewindeschneiden * Thermo-Friendly Concept * Vollständige Maschinenverkleidung Späneförderer

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,335 h, functionality: fully functional, Vezérlés: OKUMA OSP P300LA-e 1335 H WORKING HOURS ONLY Ágy fölötti körbefordulási átmérő: D450 mm Kereszt szán fölötti körbefordulási átmérő: D350 mm Max. esztergálási átmérő: 230 mm Max. esztergálási hossz: 500 mm X-tengely út: 165 mm Z-tengely út: 470 mm Djc Tl Idsziqp Sevtokp Max. fordulatszám: 5000 ford/perc Hajtási teljesítmény: 15 / 11 kW (20 perc / folyamatos) Orsófurat: D62 mm Revolver: 12 állású Max. szerszámméret: 25x25 mm Szegnyereg hüvely: MK5 Tömeg: kb. 3800 kg Méretek (HxSzxM): 2600 x 1830 x 1700 mm Tartozékok, felszereltség - Hűtőfolyadék berendezés - Forgácskihordó - 3 pofás tokmány D250 mm - Beépített szerszámmérő kar - Lábpedálok - Géplábak - Kézikönyvek ## Technical Specifications * Control: OKUMA OSP P300LA-e * Swing over bed: Ø450 mm * Swing over cross slide: Ø350 mm * Maximum turning diameter: Ø230 mm * Maximum turning length: 500 mm * X-axis travel: 165 mm * Z-axis travel: 470 mm * Maximum spindle speed: 5,000 rpm * Spindle drive power: 15 kW (20 min) / 11 kW (continuous) * Spindle bore: Ø62 mm * Turret: 12-station * Maximum tool size: 25 × 25 mm * Tailstock quill: MT5 * Machine weight: approx. 3,800 kg * Dimensions (L × W × H): 2,600 × 1,830 × 1,700 mm Redpfxezkwc Us Amkjcd ## Accessories and Equipment * Coolant system * Chip conveyor * 3-jaw chuck, Ø250 mm * Built-in tool setter arm * Foot pedals * Machine leveling feet * Operating manuals ## Technische Daten * Steuerung: OKUMA OSP P300LA-e * Umlaufdurchmesser über Bett: Ø450 mm * Umlaufdurchmesser über Planschlitten: Ø350 mm * Maximaler Drehdurchmesser: Ø230 mm * Maximale Drehlänge: 500 mm * X-Achsen-Verfahrweg: 165 mm * Z-Achsen-Verfahrweg: 470 mm * Maximale Spindeldrehzahl: 5.000 U/min * Antriebsleistung der Spindel: 15 kW (20 Min.) / 11 kW (Dauerleistung) * Spindelbohrung: Ø62 mm * Revolver: 12-fach * Maximale Werkzeuggröße: 25 × 25 mm * Reitstockpinole: MK5 * Maschinengewicht: ca. 3.800 kg * Abmessungen (L × B × H): 2.600 × 1.830 × 1.700 mm ## Zubehör und Ausstattung * Kühlmittelanlage * Späneförderer * 3-Backen-Futter, Ø250 mm * Integrierter Werkzeugmesstaster * Fußpedale * Maschinenfüße * Bedienungsanleitungen

Year of construction: 1988, condition: ready for operation (used), Interface: RS232C, connected load: 21kVA, control system: Okuma OSP 5000 L-G, length: 2900mm, width: 1800mm, height: 1720mm, weight: 4.5t, ball screw of the X-axis has 0.2mm backlash, regularly maintained, with chip conveyor. An on-site inspection is possible. Rodpfx Amoy U Nq Uokecd

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,100 kg, product length (max.): 3,900 mm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details. • Control system OKUMA OSP P200L • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 stations • Number of revolvers 2 • Tool holder BMT 60 • Number of tools 24 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Y-axis travel mm • X-axis travel 200 mm • Z-axis travel 1000 mm • Hydraulic clamping Y-axis • Sub-spindle with W-axis • Spindle configuration twin spindle • Main spindle bore 110 mm Rcsdpey Ddtvsfx Amkod • Spindle bore approx. 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 4200 rpm • Main spindle drive VAC 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 360 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mmMachine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight approx. 6100 kg • Maintenance contract yes • Utilization 60% Additional equipment • Bar feeder • OPTIONAL for an additional charge: Approx. 200 tools available, collets, power tools Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm Rcedpoy Dc Niefx Amksd • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,500 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 11,000 W, total height: 1,569 mm, overall weight: 3,800 kg, controller manufacturer: OKUMA, controller model: OSP P200 L, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning machine we have for sale. Contact us for further details. • Max swing over covers: 450 mm • Max turning diameter: 200 mm • Max turning length: 380 mm • Spindle nose: ASA A2-6 • Front bearing diameter: 100 mm • Spindle bore: 62 mm • Bar capacity: 50 mm • Rapid traverse (X/Z): 20–25 m/min Rjdey A I Stepfx Amkecd • Tailstock taper: MT No. 5 • Tailstock quill stroke: 100 mm • Turret type: VDI-30 V12 • Indexing time (1 position): 0.1 sec • OD tool size: 20 x 20 mm • ID tool size: 32 mm • Live tool speed: 6,000 rpm • Live tool power: 4.0 / 1.8 kW • Floor space: 2.081 x 1.550 m • Total power on time: 23,498 hours • Operating time: 6,490 hours • Cutting time: 5,278 hours Additional equipment • Static tool holder kit included Technical Specification Counter Spindle No Driven Tools No