Used Oil & Steel 2002 Oil & Steel Scorpion 130, Autohoogwerker, 13 Meter for sale (35,719)

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Length: 17.10m Dcedpjxqfwtjfx Adhsn

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Dsdpfx Adsy Hkd Hehocn Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, mileage: 88,500 km, power: 96 kW (130.52 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,300 kg, gearing type: mechanical, emission class: euro6, loading space length: 2,630 mm, loading space width: 1,780 mm, loading space height: 1,700 mm, Equipment: ABS, central locking, electronic stability program (ESP), Ducato Multijet 130 Dcsdpfxsz Ivlmj Adhjn First registered: 07/2017 !!!! ONLY 88,600 km !!!!! Payload: 1400 kg Euro 6 Manual transmission Wheelbase: 3240 mm Cargo space: L: 263 cm W: 178 cm H: 170 cm Registered in Austria Delivery possible ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…?…?... Roman We will gladly take care of your financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: excellent (used), 1 used, very well-maintained horizontal boring and milling machine / table drilling machine with point-to-point and contour control HEIDENHAIN TNC 145 and facing head Manufacturer: WMW UNION, Origin Germany Model: BFT 130/7-TNC 145 Year of manufacture: 1984 Technical data: Spindle diameter: 130 mm Spindle shank: SK 50 Table surface: 2000 x 1800 mm Travel: X-axis, transverse 2785 mm Y-axis, vertical 2520 mm Z-axis, longitudinal 2345 mm W-axis, quill 900 mm Dcsdjz Euuzspfx Adhsn B-axis, table 360° Table load: 8000 kg Speed range: 5-1000 rpm Facing head speed: 5-2500 rpm Feed force X/Y/Z: 20000/20000/25000 N Feed rate X/Y/Z: 5-2500/5-2500/2-2500 mm/min Rapid traverse X/Y/Z: 5/5/3.15 m/min Total connected power: 100 kVA Total power consumption: 70 kW Footprint L x W x H: approx. 8.40 x 5.9 x 5.5 m Weight: 35,300 kg Accessories / Special features: • Point-to-point and contour control HEIDENHAIN TNC 145 • Spindle Ø 130 mm with SK 50 with motorized tool clamping • Facing head • Feed and rapid traverse • Lateral table supports R + L with hardened guides • Coolant system • Guide rail telescope covers • Swiveling control panel • Separate control cabinet and hydraulic unit TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Rear doors, Smooth exterior walls Equipment: - 40mm insulated wall - +2° C to +10° C - GOVI 1600N Net: €8,025.21 / Gross: €9,550.00 Item number: UC6113251319.01 Technical data: • Brand: Unsinn • Model: UKT 6C 2513-13-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 250 x 135 x 190 cm • External dimensions (LxWxH): 391 x 192 x 248 cm • Loading height of the floor: 55 cm • Permissible total weight: 1,300 kg • Unladen weight: 625 kg • Payload: 675 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid aluminum chassis for safe driving characteristics • Loading area made of multi-layer glued screen-printed plywood, 18 mm • 4 stable telescopic crank supports for up to 6000 kg standing weight • Thermo-sandwich construction • Interior and exterior skin made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 40 mm PU core • Exterior color silver RAL 9006 • Rear door, double-wing with aluminum hinges • Refrigeration unit toggle fastener and stainless steel door latch • Rear frame and trim profiles made of special aluminum profiles, anodized for aesthetically pleasing appearance • Impact protection 200 mm at the bottom, all around • Refrigeration unit Arktik 1600 N • Cooling capacity 1800 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Fully encapsulated unit with "outdoor" housing mounted on the front at the top • Environmentally friendly, CFC-free refrigerant Dodpfozy Dwqex Adhjcn • Electronic defrosting system for the evaporator • The control display is lockable and therefore protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • 230-volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse drive automatic • Plastic mudguards • 13-pole plug • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load-bearing capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, mileage: 128,500 km, power: 96 kW (130.52 HP), first registration: 08/2017, fuel type: diesel, overall weight: 3,300 kg, gearing type: mechanical, emission class: euro6, loading space length: 2,630 mm, loading space width: 1,780 mm, loading space height: 1,700 mm, Equipment: ABS, central locking, electronic stability program (ESP), Ducato Multijet 130 First registration: 07/2017 !!!! ONLY 128,600 km !!!!! Dedpfx Adjz Ivk Ashjcn Payload: 1400 kg Euro 6 Manual transmission Wheelbase: 3240 mm Cargo area: L: 263 cm W: 178 cm H: 170 cm Registered in Austria Delivery possible ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…?/?… Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: €2,000 Our services for you: - Customs license plate - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: ready for operation (used), Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible. Dcjdexl Upzspfx Adhon

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 49600 € 947.36 € 130 to 600 mm 5 2 50x18 mm 80 mm 600x18 (max. 600x20 mit D mm 120x120x11 (max. 150x150x mm 45/40 mm 130x12 mm 250x12 mm 15 kW Dsdpfx Adsynnggehjcn hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: new, capacity 90 degrees: round 130 mm capacity 90 degrees: square 130 mm 130 x 125 dimensions of saw-band 1440 x 13 x 0,65 mm dimensions 350 x 690 x 520 m band speed 30 - 80 m/min total power requirement 1,2 kW weight of the machine ca. 19 kg Djdpfx Asfv Aq Usdhocn Action Price!! Berg & Schmid - assembly band saw PBS 130 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60°

Condition: good (used), Year of construction: 1989, piece diametre 1500MM max coupling 914MM Dcjdofl Aaqopfx Adhen poids 15 tonnes

Condition: good (used), Hydraulic straightening press Manufacturer: G + K Year of manufacture: 1992 Max. pressing force: 130 t Table size (bottom): 800 x 500 mm with T-slots Table size (top): 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Dcjdpfxezkg Igo Adhen Weight: 3400 kg Operating voltage: 380 AC, 24 DC Control system renewed 5 years ago The machine is equipped with 2 tables, one at the bottom and one at the top, each measuring 800 x 500 mm. A throttle valve is installed on the hydraulic unit to adjust the pressure.

Condition: excellent (used), 130mm meat grinder in excellent condition. Dedpoyw A Hujfx Adhecn

Condition: new, Year of construction: 2024, neu 2024 9722 prompt, Zwischenverkauf v Türkei 17300 € 332.16 € 1 2050 mm 3 mm 130 mm 3,5 m/min 2.2 kW 3200 mm 750 mm 1000 mm 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS (PRICES ON REQUEST): (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Dcodpewiqpbsfx Adhen Digital Read-Out

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Dsdpfx Aet Hwt Sedhscn Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 69,000 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 160 mm, spindle motor power: 11,000 W, total height: 2,050 mm, overall weight: 5,600 kg, controller manufacturer: FANUC, controller model: Series Oi-TD, This Takamaz XW-130 Lathe was manufactured in Japan in 2013 and has been operative for 69000 hours, from which 40000 are cutting hours. This machine incorporates 2 turrets each with 8 positions. 20 pcs tool holders are included. Additional equipment • 20 pcs tool holders Machine Benefits Qualitative Machine Benefits • Good condition, regularly maintained Technical Machine Benefits • Chuck size 8 inches • Spindle bearing diameter 100 mm • Spindle center height 1000 mm • Max. Turning diameter 280 mm Dcedpjzvu Tbofx Adhen • Max. Turning length 155 mm • Loading system • 2 turrets each with 8 positions Dimensions Machine Depth 2140 mm

Condition: used, mileage: 269,394 km, power: 108 kW (146.84 HP), first registration: 09/1995, fuel type: diesel, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 4,400 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 5, emission class: euro1, suspension: air, permissible axle load (axle 1): 3,800 kg, permissible axle load (axle 2): 7,200 kg, Year of construction: 1995, = Additional Options and Accessories = - Aluminum fuel tank - Rotating beacon = Further Information = General Information Cab: double License plate: BD-FX-45 Technical Information Number of cylinders: 6 Axle Configuration Tire size: 235/75R17.5 Brakes: Disc brakes Front axle: Max. axle load: 3800 kg; Steerable Rear axle: Double tires; Max. axle load: 7200 kg; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 4,480 kg Payload: 6,520 kg GVW: 11,000 kg Dedpfx Adszizrdehocn Further Information Please contact Maurits Van Giessen for more information.

Condition: used, Year of construction: 2016, Easylift r130 Bj 2016 Hour meter 4200 Working height 13.0m Trolley reach 6.50 m Weight 1700kg Dcjdozfa Tlopfx Adhen

Condition: good (used), Standard radiator, car radiator, oil cooler, heat exchanger -Oil cooler: Heat exchanger, without fan -Type: unfortunately no type designation -Pressure: max. 20 bar -Temperature: max. 120 °C -Dimensions: 270/130/H260 mm Dcjdpfszk Etbex Adhsn -Weight: 4.4 kg

Condition: used, Round workpiece grinder Dcedjxdivajpfx Adhon Manufacturer: BRUSA & GARBOLI Country of manufacture: Italy Model: LT 130 - BRUSA DI GARBOLI Year: 2023 Technical parameters: min. diameter (with special feed rollers): 10 mm max. diameter 127 mm min. - max. length 680 - 6000 mm sanding belt size 2000 x 120 mm disk motor power 2.2 kw sanding belt motor power 5.5 kw feed motor power 0.25 kw feed speed 1 - 20 m/min weight 760 kg dimensions 160 x 13 5x 170 cm electrical connection 400V / 50Hz feed system self-centering feed speed regulation frequency sanding belts 1 set Adjustment tools 1 set Instruction manual 1 set CE certificate of conformity Optional equipment: PLC control unit “Keyence” photocell, control of opening/closing of the grinding belts Outgoing workpiece feed rollers with drive

Condition: new, Year of construction: 2024, 1050 mm 5.5 mm 5.0 mm roll diameter 130 / 195 mm 2.2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Dodpfx Aoq Sz Ahsdhscn Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: ready for operation (used), Indramat MAC112B-1-PD-2-C/130-B-0/S005 Permanent magnet motor SN:MAC112-82766 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Dedpfx Adjvabhdohjcn

Condition: new, empty load weight: 380 kg, maximum load weight: 920 kg, overall weight: 1,300 kg, loading space length: 2,550 mm, loading space width: 1,280 mm, loading space height: 1,530 mm, tire size: 165R13, Plywood box body WEB40 from trailer manufacturer Unsinn. The car trailer with plywood body made in Germany has white walls and a transparent roof. The box trailer is equipped with a lockable single-leaf door with espagnolette lock, support wheel, light roof, tubular drawbar and plastic-coated white walls. Dedpfx Asq Nzr Djdhscn Accessories for this car trailer include ramps, lashing rails, rear supports, lashing eyes, tool box, anti-theft device, lashing straps and much more.

Condition: ready for operation (used), Indramat MAC 090C-0-KD-4-C / 130-A-0 / WI522LV / S003 Permanent three-phase servo motor SN:54968 without tacho and encoder, used, normal signs of wear, 100% functional, scope of delivery as per photos Dcodpformga Usx Adhsn

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: 6 D 130/50-10 -Number: 4 pieces available -Price: per piece -Dimensions: 110/105/H145 mm Dcedpfxjgqg H Ue Adhen -Weight: 6,0 kg

Year of construction: 1987, condition: used, bore diameter 620 mm spindle diameter 130 mm bore depth 320 mm feed stepless 0 - 12 mm/min turning speeds 10 - 70 U/min voltage 380 V / 50 Hz total power requirement 4 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,0 x 1,2 x 1,3 m transportable drilling out work, completely ready for connection Djdpfxot I D Sws Adhocn gear of drill spindle runs over LENZE planetary drive advanced feed with LENZE direct current motor, output: 160 watt clockwise and counterclockwise with tool holder for Ø 420 x 620 mm, tool holder for tooling equipment fabri. LENZ LPAS 3, diverse turning steel