Used Multi-Pallet Handler 2/1 Profile Type for sale (116,730)

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Fgjdpfx Aijzx Ennevjh Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, functionality: unexamined, Year of construction: 2002, lifting height: 3,766 mm, chain length: 11,300 mm, load capacity: 7,500 kg, lifting speed: 35 mm/s, fine lifting speed: 8 mm/s, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, 4 Verlinde Eurochain VL25 electric chain hoists, 7.5 tons (7500 kg) each. Made in France, year of manufacture 2002. Each hoist includes a lower block with hook, chain bag, and suspension eye. Details according to the nameplate: Type: VL25 7502 B1 Lifting capacity: 7500 kg 3 chain strands (lower block with 3-strand suspension) Chain: 11.3 x 31 mm Fjdpfxsz I T Eqj Aivogh Lifting speed: 2.1 m/min fast / 0.5 m/min slow (2 speeds, for precise positioning) Motor: 3.5 / 0.86 kW, 400 V, 3-phase, 50 Hz FEM group 1Bm Protection class IP55, insulation class F CE Condition: used, removed from a building in working order (not yet tested by us). Repainted, shows signs of use, chain with surface rust. Cables partially cut, control panel (push buttons) not included. Sold as is, without inspection. Always have a hoist inspected before use. Suitable for workshops, steel construction, machine construction, and as a spare or for parts. Price per hoist. All 4 together: inquire about the package price. Collection or transport by arrangement. Prices exclude VAT. Export possible.

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B robot, fully equipped with options. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two renowned robot manufacturers, ABB and Fanuc. Fgsdjzxblpspfx Aiveh

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 3,000 kg, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Fjdpfx Aew Dlg Doivogh Technical condition: good Description: Year 2011 ISO 3A (51 cm) Capacity 3000 kg Sideshift Opening range 560-2285 mm Width 1630 mm Forks 1200 mm ID OS1409

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Fsdpoyz Tmyofx Aivogh Type: Multicomponent (2K injection) Drive: Hydraulic 2x hydraulic valve

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 3,000 kg, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Fedpfx Asw Dlgwjivjgh Description: Year 2011 ISO 3A (51 cm) Capacity 3000 kg Sideshift Opening range 560-2285 mm Width 1630 mm Forks 1200 mm ID OS1408

Condition: used, Year of construction: 2013, load capacity: 1,800 kg, construction height: 410 mm, construction width: 1,200 mm, Multi-pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Fodpfx Ajt T E Nbjivegh Technical condition: very good Description: ISO 2A (41 cm) Capacity 1800 kg Opening range 550-1930 mm Forks 1000 mm Width 1200 mm Year 2013

Condition: like new (used), functionality: fully functional, power: 45 kW (61.18 HP), nominal power: 45 kW (61.18 HP), rotational speed (min.): 2,960 rpm, type of input current: AC, ATB Nordenham ATEX Rated 45kW Motor Type: CD 225M-2 Fgodpfoyq Sf Sjx Aivsh New, unused, ex stores stock

Condition: excellent (used), 7.4 m Large PB-80 Pallet Rack With a standard pallet height of 1.20 m, you can install 6 beam levels in the 10.3 m high rack. Together with the storage spaces on the floor, this results in 7 storage levels stacked on top of each other, which means a total of 28 pallet spaces per rack bay with 4 pallets per bay. Material & Construction: The galvanized surface provides long-lasting corrosion protection. The bolted frame (diagonal and transverse struts) allows for easy replacement of individual components in case of damage (e.g., due to forklift impacts), unlike welded frames. Profile: The profile dimension of 80 x 60 mm is a typical dimension for medium to heavy-duty pallet rack uprights, ensuring the necessary buckling stiffness at over 10 meters in height. Manufacturer: Nagy Type: PB-80 Rack length: approx. 7.40 m Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Profile: 80 x 60 mm Frame: bolted Upright surface: galvanized Clear bay width: 3.60 m Beam: 3600 x 120 x 45 mm Beam surface: blue painted (RAL 5015) Number of bays: 2 (base bay + 1 add-on bay) Number of levels: 7 incl. floor space Max. pallet weight: 500 kg Permissible bay load: 2000 kg Permissible bay loading: 12000 kg Pallet spaces: 56 Scope of delivery: 03 x Upright approx. 10.30 x 1.10 m galvanized 24 x Beam approx. 3.60 m blue incl. safety pins Your partner for safe warehouse logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed professionally and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a conversion, or a warehouse relocation – we handle the professional assembly and disassembly of your systems: - Pallet racks (heavy-duty & standard) - Shelving racks for small parts and archives - Warehouse mezzanines for optimal space utilization Rack inspection according to DIN EN 15635 Fgsdpfx Aioyvr Aioveh Safety is a legal obligation. We carry out the annual expert inspection (in accordance with DGUV rule 108-007): - Inspection for deformations and damage. - Checking of safety pins and load signs. - Creation of a legally sound inspection report including an inspection label. We would be happy to offer you a suitable bank financing for your project. You can find more pallet racks – new and used – in our shop! International shipping costs on request!

Condition: used, Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This tunnel freezer is currently assembled in our warehouse as you can see in the last photo, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Fjdsrlk Ikspfx Aivjgh

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 3,800 kg, Multi-pallet fork ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Fedpfx Aijyzvnasvogh Technical condition: Good Description: Year 2017 ISO 3A (51 cm) Capacity 3,800 kg Sideshift Opening range 580-2,210 mm Width 1,460 mm Forks 1,140 mm ID OS1955

Condition: used, Year of construction: 2021, Multi-pallet fork Fgedpfxoymtxre Aivsh

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Fsdpfx Aioz Nx Axsvsgh Horizontal + vertical spindle Cone CM4 DECKEL Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG

Condition: excellent (used), Gemac Jungheinrich Meta Pallet Rack Beam, Type S The pallet rack beam, Type S, with a span of 2700 mm, provides space for three Euro pallets per beam pair. Used as a replacement for damaged rack beams, e.g., after a rack inspection, and for expanding existing racking systems. The beams can be individually hung at a 50 mm grid in height. Manufacturer: Gemac, Jungheinrich / Meta Model / Type: S Beam length: 2700 mm Load capacity per beam pair: max. 3000 kg Box profile: 140 x 50 mm H x D Overall length: 2780 mm Material: cold-rolled steel Profile design: Rectangular profile Mounting: Hook tabs on each side of the beam for hanging, secured with a locking pin. Surface: Powder-coated Fgsdsw N Nbnspfx Aiveh Color: Rotorange RAL 2001 Scope of delivery: 1 x pallet rack beam 2700 x 140 x 50 mm, orange You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, The machine is equipped with a storage hopper for sparkling-wine corks. The corks are automatically oriented and conveyed through the feed channel to the corking unit. Fodpjz N S S Hjfx Aivegh

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) Fodpfx Aeuxfu Neivsgh - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2014, functionality: fully functional, GLASTON TAMGLASS RC200 (Type 2136) – Year 2014 Tempering Furnace Max. Glass Size 2100 x 3600 mm Installed Power: - Blowers: 250 kW Fodpfx Aisz D Dnhjvegh - Heating and Drives: 421 kW - Average Process Power: 263 kW Overall Dimensions: 18,000 x 6,000 x 3,100 mm Blower Room Dimensions: 6,000 x 5,000 x 4,000 mm

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Equipment: ABS, BOBCAT E60 R2-SERIES – AIR CONDITIONING – 2 BUCKETS – FROM FIRST OWNER – READY FOR USE – 1,700 OPERATING HOURS – VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST * FROM FIRST OWNER VEHICLE EQUIPMENT * TYPE: E60 R2-SERIES * AIR CONDITIONING * 2 BUCKETS * 1,700 OPERATING HOURS * 5,685 KG * 41 KW * IMMEDIATELY READY FOR USE ---- * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 ----EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) – 5 DAYS, 30 DAYS REGISTRATION, AND 17–21 DAYS AUSTRIAN REGISTRATION, EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors, and prior sale! Fgedpfx Asz Emumoivsh You can find more vehicles on our website: Sales are exclusively based on our general terms and conditions – see our website. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm Fjdpfxow A H T Ao Aivsgh A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: used, mileage: 573,000 km, first registration: 12/2019, fuel type: diesel, fuel: diesel, Year of construction: 2019, 2 x DAF XF106 450 SSC BDF swap body vehicles with hydraulic lifting frame VANTEC • VANTEC hydraulic lifting frame / multi-changer system • Emission standard: EURO 6 D • Intarder • Axle configuration: 6x2 • Lift / steering axle (3rd axle) • Automatic climate control • Stationary air conditioning • Auxiliary heating • Automatic transmission • Differential lock Fgodpfowmplcsx Aivoh • Adaptive cruise control • Lane departure warning system • Emergency brake assist • Hill start assist • Multifunction steering wheel • Refrigerator • Airbag • Radio-CD player • 2 bunks • Gross vehicle weight: 26,000 kg • Unladen weight: 10,220 kg • Wheelbase: 4,600 mm • Parking height: 1,020 - 1,320 mm • Suitable for swap bodies of 7,150 and 7,450 mm • Frame length (rear wall of cab to end of vehicle frame): 7,040 mm • Tyres: 315/60 R22.5 • Tread depth: 11/12 9/9/11/11 13/13 mm - very good! - German vehicles! - 1st owner! - General inspection / emissions test and safety test can be done new on request for an additional fee! Errors and prior sale excepted!

Condition: used, machine/vehicle number: 69/86, ca. 2000 Fl/Std Betriebsspannung 380V / 50Hz Steuerspannung 220 V Vorsicher. 16 Aca. 6000 Fl/Std Betriebsspannung 380V / 50Hz Steuerspannung 220 V Fgjdoz Icb Ujpfx Aiveh Vorsicher. 16 A

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 4,500 kg, Multi-pallet fork ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019 ISO 4A (61 cm) Capacity 4,500 kg Sideshift Opening range 560-2,760 mm Width 1,980 mm Forks 1,150 mm ID OS1638 Fodpjw Erf Aefx Aivogh

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 Fgsdpfx Asy Auh Ieivsh * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Fgedpfeyzvmcjx Aivjh Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 3,800 kg Sideshift Opening range 660-2,910 mm Width 1,960 mm Forks 1,200 mm ID OS1947

Condition: used, Year of construction: 2017, load capacity: 3,000 kg, Multi-pallet fork Fedpfx Aijzc S Ikjvjgh