Used Medi Copper Round Rope for sale (4,791)

Condition: new, Year of construction: 2025, - Capacity 1070 x 5 mm Gedegg Nv Sjpfx Amusub - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital display for rear roll movement - Hardened rolls - Conical rolling - Emergency stop - Documentation - 400V

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. Godpfx Amjdzqn Deuoub The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Tool steel, round material, shaft cut Shaft, steel block, sawn shaft Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Used in toolmaking for cutting, punching, and embossing tools. Rollers and profile rolls, measuring tools, guide rails, paper cutting knives. Condition on delivery: annealed to max. 229 HB Tensile strength as delivered: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Working hardness: 58-62 HRC Soft annealing: 680-720 °C - Medium alloyed cold work tool steel - Oil-hardening 4 pieces available, price per piece. Godpfxogmi U Ss Amusub

Condition: used, Crane hook, lifting block, lower block for DEMAG rope hoist, 2-sheave type Load hook Load capacity rated at 5 tons 2-sheave for 4 rope falls Godpfxow Nxy Ho Amueub Rope diameter: approx. 13 mm Distance from top of block to bottom of latch hook: 650 mm From center of sheave to bottom of latch hook: 450 mm Dimensions (L x W x H): 350 x 315 x 650 mm Net weight: 73 kg Used, in good condition

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Gsdpfx Amjid Al Njuoub Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: good (used), Round roller 1000 x 1 mm width 1055 mm roller diameter 50 mm Space requirement : Width 1200 mm height 1230 mm depth 600 mm Weight 110 kg Gujdoud Sphopfx Amueb

Condition: good (used), Sheet metal round roller Round roller 1000 x 1.5 mm width 1040 mm roll diameter 55 mm asymmetrical roller arrangement width 1500 mm depth 930 mm height 1280 mm Weight 200 kg without pallet Guodpfeud Spnox Amuob

Condition: new, Year of construction: 2025, - Capacity 700 x 4 mm - Conical rollers - Removable top roller - Brake motor Gedpfxeh Rayts Amujub - Foot control - Emergency stop - Documentation - 400V

Condition: ready for operation (used), Lot of Well Ascent copper coil/winding wire Various widths and thicknesses: 0.274 x 2.070, 0.190 x 2.760, 0.080 x 1.000, and more. Total of 25 reels Copper wire weight: ~115 kg (approximate) Godeym Amfepfx Amusub Manufacturer: Well Ascent

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam gantry including 2 welding heads, each with 3 wires (without power supply). Welding possible from ø6.5 to ø11 m. Expandable up to ø13 m. 5 systems. Gusdpfjyt Ri Uox Amusb Inspection welcome near Flensburg. B2B sales only. More photos available upon request.

Condition: used, Anvil with round and square horn Standard anvil, Bohemian design Face width: 160 mm Face length: 530 mm Horn length: 250 mm Anvil weight: 190 kg Gedpfxjyk Hrms Amueub Height: 350 mm Base: 430 x 310 mm - 28 mm square hole for anvil tools - Drop-forged, hardened Dimensions (L x W x H): 780 x 310 x 350 mm Anvil weight: 190 kg Good condition, very bright ring, good quality

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Godpfx Amoua Tbwsuoub Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, Year of construction: 2026, max. working width: 1350 mm Gjdpfxox S Dxbe Amusub workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Height: mm Machine weight: kg Standard configuration Extended machine accessories

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1760x1150x1320 mm Weight 1100 kg Total power requirement 4,5 kw Gedpfxov A Hyke Amujub

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Gujdpfsyrpxxsx Amujb

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Gsdpfx Ameyrpw Ieujub

Condition: excellent (used), Year of construction: 2010, 4-axis PEISLER Type :RT-215 Year 2010 ( 3rd piece available ) Guodjt Daxxspfx Amuob Center height: 215 mm with power chuck Fabr.RÖHM Type:KFD-HS215/3 Fmax.48KN Nmax.3000/min with hydraulic connection for chuck and drive shaft on both sides, without motor and controller in very good condition. Quoted price is for one piece .

Condition: good (used), Year of construction: 1990, Round table, make PEISSLER PRT 500 Godpfxsvk D Sge Amueub DM 500 mm. Good condition.

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm Godpfx Asycfyajmueub -Weight: 13.3 kg

Condition: new, Ostas 3 rolls round bending machine SMR-S 1570 x 170 Technical specifications: Special equipment included in the price: motorized lower roll adjustment hardened rolls Guedjiw D Smspfx Amujb motorized back roll adjustment 2 x digital display sheet width 1570 mm sheet thickness 8,0 mm max. sheet thickness 7,0 mm bending roll length 1570 mm smallest diameter 255 mm roll diameter 170 mm weight 1960 kg dimension L-W-H 3200 x 920 x 1260 mm motor 5,5 KW Equipment: upper and lower roll electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line, CE-sign values apply to St-37 / 240 N/mm²

Condition: new, Rollmak 3-roll round bending machine SME 140-20/4,5 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 2050 mm sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 2050 mm roll diameter 140 mm smallest bending diameter 210 mm Gujdpfx Aelu Eumomueb weight 1550 kg dimension L-W-H 3150 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Ostas 3-rolls round bending machine ORM 1070 x 130 Special equipment included in the price hardened rolls motorized rear roller adjustment digital display sheet width 1070 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1070 mm roll diameter 130 mm weight 1150 kg dimension L-W-H 2250 x 800 x 1100 mm Motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line CE mark Godoiu Hpfepfx Amueub values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3-roll round bending machine SBM 1070 x 95 Features: Asymmetric 3-roll round bending machine with motor drive Special equipment included in the price: Hardened rolls Motorized rear roller adjustment Digital display Top roller can be swung out Conical bending device Gsdpogkwimofx Amusub Foot switch Technical details: sheet width: 1070 mm sheet thickness: 3,0 mm roll length: 1070 mm Roll diameter: 95,0 mm Smallest bending diameter: 140,0 mm Motor power: 1,1 kW Dimension L-B-H: 1350 x 760 x 1250 mm Weight: 370 kg

Condition: new, Fastech 3-roll round bending machine FRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment motorized bottom roll adjustment 2 x digital display sheet width 1250 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1250 mm roll diameter 140 mm smallest bending diameter 210mm weight 1365 kg dimension L-W-H 2020 x 900 x 1200 mm Gsdshzq Dxspfx Amuoub Motor:2,2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, Rollmak 3-roll round bending machine SM 90-12/3,0 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 3,0 mm max. sheet thickness 2,5 mm bending roll length 1250 mm roll diameter 90 mm smallest bending diameter 130 mm weight 500 kg dimension L-W-H 1850 x 700 x 1200 mm motor:1,1 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² Gedpfx Aolu Enrjmujub CE mark