Used Mass Spectrometer for sale (693)

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants Hedpfxez Slkve Abksnu • Securing mass events • Extinguishing fires from a great distance / high water flow

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN Hnodpfx Aozii Awebkou The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Hedpfx Aozimaaobkjnu Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Hjdpfxozryu Aj Abkenu Technical data: - Cutting length: approx. 2,200 mm - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm - Further details: See PDF

Condition: used, Year of construction: 2023, Standard observers: 2° (1931) and 10° (1964), standard illuminants: D65, D55, F11, A, C, color spaces/values: XYZ, Yxy, LCh*, Luv*, ΔE CIE Lab*, ΔE CIE94, ΔL*, Δa*, Δb*, yellowness index according to DIN 6167 or whiteness metrics, spectral range: 400-700nm, spectral resolution: 10nm (internally 3.5nm), spectrometer: holographic grating spectrometer, display: relative values, absolute values or customer-specific values, repeatability: ΔE = 0.05 CIE Lab, repeatability test: 10 measurements of the supplied white standard, memory: non-volatile, more than 1,500 measurements without a PC, ambient temperature: 15-35°C, max. relative humidity: 85%, non-condensing, PC interfaces: USB, RS232, current output: 4-20mA, length: 235mm, width: 220mm, height: 60mm, weight: 1.85kg, including original operating manual, USB flash drive with installation file for "ColorDaTra_IPM" software version 1.94, installation file for update to version 1.95 and license key, last calibrated in 2025. On-site inspection is possible. Hedez R Uwpopfx Abksnu

Condition: used, The VJ-2638X printer is versatile, suitable for producing a wide range of outdoor and indoor prints such as long-term outdoor posters, billboards, building announcements, signs, banners, backlit signage, POS displays, vehicle graphics, fine art reproduction, and posters. The VJ-2638X is a robust printer featuring proven technology from Japan. It includes a staggered dual head setup with the latest generation 1440 nozzle piezo heads, ensuring extreme print quality and sharpness at all production speeds. The printer incorporates Mutoh Intelligent Interweaving (i²) and DropMaster technology, achieving super high-resolution prints at 22 m²/h (720 x 1080 dpi) and production speeds of 33 and 39 m²/h at 720 x 720 dpi. It produces durable prints on both coated and uncoated substrates with exterior durability up to 3 years. Technical Key Specifications Print Technology: Drop-on-demand Micro Piezo Inkjet Technology Print Heads: 2 (staggered setup) Nozzle Configuration: 180 nozzles x 8 lines Drop Mass Range: 3.6 to 35.2 pl Head Heights: Low: 1.5 mm, Middle: 2.5 mm, High: 4.0 mm Max. Media Width: 2600 mm (102.36”) Max. Print Width: 2590 mm (101.97”) Max. Media Thickness: 0.3 / 1.3 / 2.8 mm Media Drying System: Individually controlled pre-heater, fixer, and dryer (30 - 50 °C) Performance The printer offers various quality and speed settings, with print resolutions ranging from 720 x 1440 dpi to 360 x 720 dpi, and speeds from 12 m²/h to 48 m²/h. Hnedsz Sr D Ijpfx Abkou Ink Specifications Ink Types: Eco Ultra / UMS Ink Volume: 220 ml, 440 ml & 1000 ml (optional adapter required for 1000 ml pack) Ink Colours: CMYK Ink Consumption: 8 ml/m² (average at 720 dpi, 67% coverage) UV Durability: 3 years outdoor without lamination (lamination required for heavy-duty applications)

Condition: new, mileage: 500 km, power: 152 kW (206.66 HP), color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph is happy to assist you by phone at: Hnsdpfx Absyklwuekju Front axle suspension: Quad-Tor torsion bar suspension, axle configuration: 2 axles, rear-wheel drive, left-hand drive, engine: 3.0 l D EVIe 152 kW (207 hp), transmission: HI-MATIC 8-speed automatic gearbox, permissible gross mass Daily 7.0 t / 7.2 t, rear axle leaf suspension, rear axle with twin tires, vehicle version: crew cab 6+1, wheelbase 4350 mm, standard specification, seat belts with warning signal for driver and passenger, standard seat belt color, belt tensioner passenger side, fabric seat covers, 4G connectivity box incl. TCO service contract, digital VIN code, daytime running lights, digital EC tachograph 4.1, light and rain sensor, manual high beam control, bodybuilder interface, mirrors for 2350 mm body width, rear parking sensors, standard Daily identification, wide wheel arch lining, rear blind spot radar, fuel filler neck in B-pillar, lane departure warning (LDWS), vehicle badge standard, tire pressure monitoring system (TPMS), forward monitoring (MOIS), side vehicle designation, standard paint finish, MY 2024, standard rear lights, electrically adjustable and heated exterior mirrors, cab width 2000 mm, driver fatigue warning system (Driver Drowsiness Attention Warning), warning triangle, version and dimensions according to ECE-27 guideline, central locking with remote control, grab handle on A-pillar, COC EU type approval, 2 wheel chocks, traffic sign recognition with intelligent speed assist (ISA), warning beacon, electric window lifters for front doors, left-hand drive for right-hand traffic, front airbags for driver and passenger with belt tensioners, first aid kit, pre-installation for alcohol interlock, speed limiter 90 km/h, spare wheel mount at rear end of frame, AdBlue tank 20 liters under cab, weight variant 2500/5350 kg, spare wheel, dimension corresponding to chassis tires, rear trapezoidal spring, rear underrun protection, steel rims, integrated 90 l fuel tank, C-profile steel ladder frame, tires 225/75 R16, standard suspension front axle, homologation for standard freight transport vehicles, standard data set, exhaust tailpipe centrally under vehicle, standard oil pan, aluminum radiator, rear axle ratio i 4.30, emissions standard EURO VI E, heated crankcase ventilation, standard starting strategy, parking brake control for remote ignition, engine speed 3500 rpm, diesel particulate filter, standard fuel, heated fuel filter, automatic torque converter transmission HI-MATIC 8HP, comfort noise insulation, side marker lights supplied loose, no bench seat in passenger compartment, luxury seat for passenger with armrest and lumbar support, adjustable in height, tilt and length, hydraulically suspended, heated, additional speed limiter, switch for body lighting, battery 12 V 105 Ah/950 A, 12 V 13-pin trailer socket, cab rear wall with window, recommended for certain body types to monitor rear traffic, additional vehicle key with remote control, storage box next to driver’s seat with USB port, roof shelf above windscreen, pre-installation for toll system (OBU), includes antenna and wiring on dashboard without receiving device, trailer load 3.5 t, ball head trailer hitch, electric parking brake, standard GVWR, alternator 3500 watts (14 volts x 250 amperes),...

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REX RVF 327 | Vacuum filler with Busch pump Manufacturer: REX Technologie Ges.m.b.H. & Co. KG Model/Type: RVF 327 (RVF 327 F/P/A) Serial number: 2377091111 Year of manufacture: 2011 Power supply: 400 V / 50 Hz Current protection: 3x 16 A Rated power: 5 kW Dimensions: 1150 x 800 x 1200 mm Vacuum pump specifications: Pump manufacturer: Busch Model: KC 0016 E 320 Pump serial number: 1100558454 Pump year of manufacture: 2011 Vacuum capacity: 16 m³/h REX Technologie RVF 327 is a professional, extremely compact, and efficient rotary vacuum filler. This 2011 unit is the heart of a portioning line in small, medium, and large meat, fish, convenience food processing plants, as well as in the cheese and bakery industries. The machine is used for continuous, highly precise portioning, filling, and twisting of various types of fillings and masses. The use of an integrated, reliable German vacuum pump from Busch with a capacity of 16 m³/h allows for effective degassing of the filling before the filling process. As a result, the final product has a compact structure, and there are no air bubbles in the cross-section (which significantly increases the shelf life of the products), as well as perfect, consistent meat coloring. Hodsy Ucikjpfx Abkjnu Key features and benefits: - Paddle-type filling transport system: The gentle, rotating mechanism ensures that the filling's structure is not crushed or smeared, which is crucial in the production of coarsely ground sausages, cabanossi, or burgers. - High-quality vacuum (Busch): The dedicated Busch KC pump ensures the optimal vacuum level in the loading chamber, providing stable operation even with thick and demanding masses. - Versatility and flexibility: The RVF 327 model works perfectly with peripheral devices such as twisting mechanisms, casing holders, automatic clippers, or hanging systems. - Intuitive control: The machine is controlled by a microprocessor panel, which allows for precise programming of portion weight, pauses, twisting time, and correction of the first portion.

Condition: excellent (used), functionality: fully functional, REX RVF 760 Vacuum Filler with Loading System Manufacturer: REX Model: RVF 760 Hnodeyah Uhopfx Abksu Power supply: 400 V 50 Hz Power: 11 kW Material: stainless steel Digital display: yes Euronorm trolley lift: yes Hopper capacity: 350 l Inlet diameter: Ø 1000 mm Dimensions: 2200 × 1300 × 2000 mm The REX RVF 760 vacuum filler is an efficient and robust machine designed for industrial filling of meat masses and other food products. Equipped with a 350-liter hopper and a vacuum system, it ensures a uniform product texture, precise portioning, and high final product quality. The machine features a digital display for easy operation and parameter control, as well as a Euronorm trolley lift which significantly facilitates the loading process of raw materials. The stainless steel construction guarantees durability, hygiene, and ease of cleaning, making this device ideal for meat and food processing plants.

Condition: excellent (used), functionality: fully functional, REX RVF 736 Vacuum Filler Manufacturer: REX Model: RVF 736 Machine number: 7361060529 Power supply: 400 V, 3 phase, 50 Hz Power: 15 kW Dimensions: 1130 × 1020 × 1790 mm Included equipment: Hjdpfex E A Rvox Abkonu - Stainless steel tool trolley Pallet with additional parts, including: - Complete wolf head for the filler - Offset gearbox - Rotary gearbox The REX RVF 736 vacuum filler is an efficient machine designed for industrial production of meat products, including fillings, sausages, and masses of various consistencies. Thanks to vacuum technology, it ensures uniform filling, excellent product texture, and precise portioning.

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Hnodpfxjz Ehvxe Abkju

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Hnsdpfxszn N Ikj Abkou

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Hnedpfx Abjxqzmweksu Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 - Operation: continuous from supply bin - Bin volume / drum Ø: 1.4 m³ / 1500 mm - Working height: 900 mm, left → right - Material / Housing: AISI 304 stainless steel + plexiglass - Safety: door switches, overload protection - Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar - Container size: round Ø ≤100 mm × 250 mm, larger on request - Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 - Filling: mass flow, 8 stations (expandable to 12) - Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h - Working height / direction: 900 mm, left → right - Product-contact parts: AISI 316, food-grade hoses, VITON seals - Tank / Pressure: 100 L, 5 bar - Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar - Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes - CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program - Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 - Operation: continuous rotary, 4 capping stations - Output: up to 5,000 containers/h - Container size: Ø ≤100 mm, H ≤300 mm - Working height / direction: 900 mm, left → right - Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools - Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar - Control: B&R controller, touchscreen, 200 format memories, password-protected - Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system - Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Hjdpfsxqrbxsx Abksnu Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Industrial Bowl Feeder and Linear Feeder, Lysta Vibrator, Used machine Manufacturer: Lysta Vibrator (Albertslund, Denmark) Type (Vibratory Bowl Feeder): D 600/750 (Serial number: 1874) Type (Linear Vibratory Feeder): 400 x 75 (Serial number: 472) Condition: Used, industrial execution Hodszwdzdspfx Abksnu Overall dimensions: 710 x 1360 x 1450 mm Technical and operating parameters: Bowl diameter: 450 – 750 mm Linear track size: 200 x 700 mm Electrical data (Bowl Feeder): 220 V / 230 V, 1 phase, 50 Hz, 3.5 A Electrical data (Linear Feeder): 220 V / 230 V, 1 phase, 50 Hz, 0.3 A Design / Operation: Electromagnetic orientation and feeding system with rotary bowl drive and linear transfer track. Suitable Application Areas: This high-precision Danish vibratory feeding system is perfectly designed for automated sorting, orientation, and feeding of small components: Assembly lines and automated cells: Feeding fasteners (screws, nuts, washers), plastic parts, or electronic components in correct orientation to assembly machines or robotic workstations. Packaging systems: Controlled, continuous, or counted feeding of small products into packaging machines. Plastics and metal processing: Orienting and singulating bulk mass components for machining, inspection, or sorting stations.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 350 h, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Hypertherm HPR130XD plasma cutting machine was manufactured in 2013. It features a power output of 130A with a 100% duty cycle, and operates at a voltage input of 400V. The included TEKA air extraction unit has a volumetric flow rate of 7500 m³/h and a motor power of 7.5 kW. If you are looking to get high-quality plasma cutting capabilities, consider the Hypertherm HPR130XD machine we have for sale. Contact us for further details. - Plasma System Power Output: 5A/82V - 130A/132V (100% Duty Cycle at 130A, 150V)- Plasma System Voltage Input (U1): 400V, 3-Phase, 50/60 Hz- Plasma System Input Current (I1max): 32A- Plasma System Power Rating (S1): 22kVA- Plasma System Open Circuit Voltage (U0): 311V- Air Extraction Unit Model: Filtercube 4H- Air Extraction Year of Manufacture: 04/2013- Air Extraction Volumetric Flow Rate: 7500 m³/h- Air Extraction Max Static Pressure: 3950 Pa- Air Extraction Motor Power: 7.5 kW- Air Extraction Nominal Current: 15.5 A- Air Extraction Supply Voltage: 400V (3PH+N+PE), 50Hz- Air Extraction Control Voltage: 230V- Air Extraction Mass/Weight: 380 kg- Air Extraction Protection Class: IP54- Control / Electrical Cabinet Drives: ECOVARIO / KOCH components (Y1-Drive, X-Drive, XX-Drive, Z-Drive) Additional Equipment: Gas bottle setup with regulators, status indicator light tower Hodpfx Aezvxq Rebksnu

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,500 mm, total width: 900 mm, total length: 1,400 mm, overall weight: 850 kg, IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 1400*900*1500 mm over width, depth and height. Instructions and packing come with the machine. With special Bandsaw pneumatic band insertion device for 10-25 mm width. Voltage 400-440 V Power 25 kVA Hnjdpfjz D Hyyox Abkeu Frequency 50-60 Hz Serial no. 239635 Year of manufacture 2012 Bandsaw blades welding widths From 6 to 50 mm possible, current setup is for blades from 10 to 25 mm wide.

Condition: new, Year of construction: 2024, total length: 980 mm, - Einfahrlaschen b:150mm, h: 60mm - Maß Außenkante -> Außenkante: 120 mm - Maß Innenkante -> Innenkante: 420 mm - Zulässige Personenhöchstzahl 1 - Einsatzbereich: Innen - Antriebsräder Ø 186 x 60 mm Hnedpjz Dk Twjfx Abkou - Lenkrollen Ø 150 x 40 mm - Steigfähigkeit ausgefahren 2,5% - Wenderadius aussen: 1050 mm - Max. Geschwindigkeit (Heben – Senken): 0,2 m/s - Max. Verfahrgeschwindigkeit (Eigefahren): 5,5 km/h - Max. Verfahrgeschwindigkeit (Ausgefahren): 1 km/h

Condition: new, Year of construction: 2026, We offer a complete set of SUPERTOOTH jaw plates for Powerscreen Premiertrak 300 and Powerscreen Premiertrak 330 jaw crushers. Fixed jaw plate — part no. CW017-002-MN180, dimensions 1300 × 973 mm, weight 656 kg, material composition 18% Mn / 2% Cr. Swing jaw plate — part no. CW017-001-MN180, dimensions 1339 × 963 mm, weight 669 kg, material composition 18% Mn / 2% Cr. Other jaw plate and liner versions are available on request. The parts can also be manufactured from an alloy containing 22% Mn / 2% Cr. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Hnedjz Dt Tyepfx Abkou Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 6,100 kg, number of axes: 4, This 4-axis DMG Mori Seiki NL2500Y/700 was manufactured in 2006. It features a robust control unit, MORI SEIKI MSX-850, and includes an integrated mist extraction unit, chip conveyor, tailstock, turret, and tool setter. With a mass of 6100 kg, this turn-mill centre is designed for high-performance machining. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki NL2500Y/700 machine we have for sale. Contact us for further details. - Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 113 A- Current Rating of the Spindle Motor: 140 A- Interrupting Capacity: 5 kA- Short Circuit Rating: 1 kA- Rated Power: 39 kVA- Mass of Machine: 6100 kg- Control Unit: MORI SEIKI MSX-850- Additional Equipment / Attachments: Integrated mist extraction unit (SARA UC1 SDIV), chip conveyor / chute integration, tailstock, turret, tool setter / probe arm Hnjdjz A Uz Nspfx Abkju Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, maximum load weight: 32,361 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 13,621 mm, loading space width: 2,524 mm, loading space height: 2,717 mm, total length: 13,886 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SCHMITZ CARGOBULL SCB?S3 – PR.+PL. – CURTAINSIDER WITHOUT GRAPHICS – VEHICLE HISTORY * First owner * German vehicle * Video of the vehicle available upon request (interior & exterior views) General vehicle data Manufacturer: Schmitz Cargobull * Model: SCB?S3 * Type: 06VLN * Vehicle type: Semi-trailer / Curtainsider * First registration: 05/13/2024 * EC type approval: e12018/85800206-01 Body: Curtainsider * 3-axle version * Air suspension * Disc brakes External dimensions Length: 13,886 mm * Width: 2,550 mm * Height: 4,000 mm Internal dimensions Internal length: 13,621 mm * Internal width: 2,717 mm * Internal height: 2,524 mm Weights Permissible total weight: 39,000 kg * Technically permissible total mass: 39,000 kg * Permissible support load: 15,000 kg * Axle load 1: 9,000 kg * Axle load 2: 9,000 kg * Axle load 3: 9,000 kg Axles & Chassis 3 axles * Air suspension * Disc brake system Tires Tire size: 385/65 R22.5 * Rim size: 22.5 × 11.75 * Load/speed index: 160J Equipment 2 storage boxes * Spare wheel holder * Small water tank * Electrical connector according to ISO 7638 (7-pin) Technical notes Operation only with towing vehicles with ISO 7638 connector * Technically possible support load: 15,000 kg Condition Ready for immediate use * Well-maintained condition EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 Hnjdezthr Sopfx Abkou EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17-21 DAYS AUSTRIAN REGISTRATION, EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL VERBAL RESERVATIONS ARE NOT VALID! For sales to EU & non-EU countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our homepage: Sales are exclusively made according to our general terms and conditions - see homepage. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute warranted characteristics.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) Hnjdpey Hp Rrefx Abkou - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: good (used), Feutron Temperature Testing Chamber -40 to +100°C The Feutron TPK 3403/125, thanks to its robust design, is a reliable workhorse for standardized temperature tests. The main application areas for this model are: 1. Electronics and Component Testing This is the most common application. It involves testing how components react to extreme temperatures: Functional testing: Does the circuit board still function flawlessly at -40 °C or +150 °C? Hsdpfx Absy Nynaokjnu Burn-in tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. 2. Material Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp in the heat? Storage tests: How stable do chemical substances or adhesives remain over long periods at a constant temperature? 3. Quality Assurance (QA) Sample testing: Tests carried out during production to ensure that the production process meets the specified temperature ranges. Standard testing: Conducting tests according to common industry standards (e.g., DIN EN 60068), which prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power connection: 220/280V-3-50Hz Supply line fuse: 25 A Protection class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 10,058 h, travel distance X-axis: 6,000 mm, number of axes: 3, Plasma cutting machine manufactured in 2007. This MicroStep SPLR-P features a Kjellberg HiFocus 160i PLUS plasma power source, offering a cutting current range of 10A to 160A. It includes an integrated CNC operator terminal for precise control and a filtration system by Donaldson Torit DCE. If you are looking to get high-quality plasma cutting capabilities, consider the MicroStep SPLR-P machine we have for sale. Contact us for further details. Hsdpfx Aozzav Eobkenu - Voltage (Sp.): 400 V 50/60 Hz- Power Rating: 3 kW- Plasma Power Source Brand: Kjellberg Finsterwalde- Plasma Power Source Model: HiFocus 160i PLUS- Plasma Power Source Serial / Art. No.: Art.-Nr. 11.033.702 / 07057- Plasma Power Source Specifications: - Open Circuit Voltage (U0): 330 V - Mains Voltage (U1): 400 V (3~ 50 Hz) - Max Current (I1max): 47 A - Effective Current (I1eff): 47 A - Power / Pressure: P1/min = 0.7 kW, Pmax = 0.5 MPa - Cutting Current Range: 10A / 84V - 160A / 144V - Duty Cycle: 100% at 160A / 144V; 100% at 25A / 90V - Power Source Mass: 196 kg - Protection / Insulation Class: IP 22, . F - Cooling Type: AF- Gas Console / Control Units: Kjellberg PGC and PGV 1- Torch Systems / Cutting Heads: - 1x Plasma Cutting Head - 1x Oxy-fuel / Flame Cutting Head- Control Console: Integrated CNC operator terminal with keypad and display- Filtration / Dust Extraction System: Donaldson Torit DCE

Condition: new, Year of construction: 2026, FREY F-Line F52 A Vacuum Filler – NEW / UNUSED For sale is a new and unused FREY F-Line F52 A vacuum filling machine. Not a used machine, not refurbished – the machine is NEW. The FREY F52 A is a professional, fully electronic vacuum filling machine for butcher shops, meat processing plants, and industrial food production. Thanks to the integrated rotary gear unit ADG04, the machine is suitable for straight-line filling, portioning, and twisting. Technical Highlights: Hnodpfjz Ahn Ssx Abkou Manufacturer: Heinrich FREY Maschinenbau GmbH Model: F-Line F52 A Vacuum filling machine with twisting function Filling capacity: up to approx. 2,300 kg/h Filling pressure: approx. 40 bar Portioning speed: up to 450 portions/min. Portioning range: 5 to 100,000 g Fine dosing from 5–999 g in 0.1-g increments FREY High-Line E-drive Removable rotary gear unit ADG04 Digitally controlled vacuum system Vacuum pump approx. 16 m³/h TC266 industrial PC control 8.4" TFT color display with touch operation Memory for up to 200 filling programs Flow measurement Piece counter and piece count shut-off Mass re-circulation Electronic pulse control for clipping machines Ethernet and USB interface Machine housing and hopper made of stainless steel Connection power: max. 5.3 kW Connection: 400 V / 50 Hz