Used Marel Ct 2630 for sale (3,858)

Condition: used, Control card, output card, controller -Manufacturer: Servomac -Type: CT 104D -Number: 2x control cards available Dodpfxecc Enyj Aa Hscl -Price: per piece -Dimensions: 215/220/H55 mm -Weight: 2.3 kg

Condition: used, Control card, output card, controller -Manufacturer: Servomac Dcedjcc Ap Ajpfx Aa Hol -Type: CT 107B -Number: 2x control cards available -Price: per piece -Dimensions: 20/165/H130 mm -Weight: 0.14 kg

Condition: used, mileage: 170,525 km, power: 220 kW (299.12 HP), first registration: 12/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro6, total length: 14,840 mm, total width: 2,550 mm, total height: 3,470 mm, Equipment: ABS, air conditioning, * First-hand municipal vehicle * Truck registration * Faun Rotopress body * Zöller tipping mechanism Dcjdpezl I Hmjfx Aa Hel Inspection only by prior appointment. Errors, typos and prior sale excepted.

Condition: new, The CT 25 (Ø 0.2 to 2.5 mm) replaces and/or complements the 25TS, which operates with a cam system. This machine has between 11 and 16 axes, details of which are given below: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of winding finger Optional (up to 5 additional axes) - servo cutter Dedsvbd Ezjpfx Aa Hjcl - servo spinners (additional) - lateral movement of winding finger - transfer for raising the second (German-type) extension spring eye. Maximum feed speed: 121 m/min. Slide travel: 50 mm Machine dimensions: 1.30 x 1.46 x 1.68 m. Machine weight: 900 kg. If you have any further questions, please do not hesitate to contact us.

Condition: used, first registration: 10/2001, Year of construction: 2001, Nooteboom 4-axle container chassis, divisible into 2 sections - 1st section: 1 axle - 11,000 kg gross weight - 2nd section: 3 axles - 26,000 kg gross weight - ABS - Air suspension - 4 x BPW Eco Plus axles - 1st axle liftable - Raise/lower device - 2 support legs each at front and rear Djdpjwmpa Hsfx Aa Hocl - Tyres: 385/55 R 22.5 - German semi-trailer - TÜV / inspection / SP: New on request and at extra charge! Errors and interim sale reserved!

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Maximum height 350 mm Turning length 1000 mm Maximum turning diameter over bed 600 mm Maximum turning diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse rate, longitudinal and transverse 9 m/min Dcsdpfjvr Eh Esx Aa Hjl Main drive 30 kW Machine dimensions with chip conveyor, L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT screen General description: CNC manual data input control with program input via function and numeric keys. Input of all information in dialog with the screen. Integrated menu system and display of all functions in plain text. Control panel, screen and handwheel in a separate chip guard. The EPL control offers the following possibilities: Programs can be entered and modified with direct operator guidance via the EPL control without program-technical preparation. NC programs in ISO/EIA standard can be entered, output or entered manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, transverse and contour turning, also with allowance. Threads. Chamfer DIN 509 form E and F and DIN 76, also grinding allowance can be programmed. Axial and radial grooves according to DIN 471 and 472, also with bottom chamfer. Radii 90° and chamfers 45°. Automatic tool radius compensation for cycles, chamfer, groove, radius, chamfer. Programming: Sentence-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, subprogram technique, masking levels for program parts. Zero point offset. Selection of operating modes via menu. Program input and output: In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, of which 6 positions are standard tool holders + 6 positions are driven tool holders • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (more on request) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Center height 260 mm Trestle holder MK 4 Quill stroke 100 mm This hydraulic tailstock comes from a GILDEMEISTER CT 40 CNC slant-bed lathe. Fig. similar Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Dodpfx Aajralkme Hocl DE - 44143 Dortmund-Wambel

Condition: used, machine/vehicle number: 15464, Year of construction: 1990, load capacity: 1,300 kg, lifting height: 2,600 mm, load center: 600 mm, fuel type: diesel, mast type: other, construction height: 1,870 mm, fork length: 1,150 mm, 4997093 Dcodpoxz Sn Tsfx Aa Hjl Serial Number: 72790116121

Condition: good (used), Year of construction: 2009, lifting height: 7,800 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 2.200 kg Functional Lifting capacity: 230 kg Working height: 980 cm Dimensions of cargo space: 234 x 77 x 186 cm CE mark: yes Condition Technical condition: good Visual appearance: good Dcsdpfx Asv Tiwaoa Hel Other information Delivery terms: EXW Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 2630ES Year of build: 2009 Condition: Used Data: Max. working height: 9,80 m Platform height: 7,80 m Platform lifting capacity: 230kg Lifting capacity on extension: 120 kg Platform dimensions LxW: 2,34 x 0,75 m Platform length pushed out: 3,20 m Total dimensions LxW: 2,34 x 0,77 m Height transport position with railing: 2,33 m Height transport position without railing: 1,86 m Ground clearance: 0,09 m Drive type: Battery Empty weight: 2.190kg Special features: white tires, attachment points for restraint systems (PSA) available Information: Suitable transport trailer upon request for an additional charge of €2,999 Location: 41468 Neuss immediately available

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Siemens synchronous motor SIMOTICS 1FK7-CT 1FK7101-2AF71-1EH2 Manufacturer: Siemens Series: SIMOTICS Motor type: Synchronous motor Dsdpfjzd Rb Djx Aa Hjcl Series: 1FK7-CT Type: 1FK7101-2AF71-1EH2 Documentation: SIMOTICS Motors for Motion Control

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping Dcsdpfx Aelc Dwvsa Hsl 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: ready for operation (used), CT CTM4-14.3-20R.94-5F6 motor SN: 07070309, used, in good condition, 100% functional, scope of delivery as per photos. Dcsdpox Dtxrsfx Aa Hsl

Condition: used, Year of construction: 2001, 150 kg weight ca. 70 kg dimensions ca. 940 x 500 x 800 mm SEMI-AUTOMATIC Continuously adjustable strap tension: 5–500 N Up to 15 strapping cycles per minute Strapping triggered automatically when the strap is inserted or via foot pedal Heat-sealed closure Load capacity: 150 kg Dcjdpjy Ihbfsfx Aa Hol Minimum product dimensions (W x H): 45 × 20 mm Height-adjustable · Ergonomic operation Clear control panel, · Easy operation from both sides No protruding controls · Strap tension adjustable via the keypad Finely adjustable strap tension from 5–500 N Strap widths 6, 9, 12 mm · Versatile application Easy access · Tape spool can be replaced quickly and easily The drive motor runs only during the strapping process · Energy-saving

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Dcjdpfsx Di Rqsx Aa Hsl Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, overall weight: 6,000 kg, total height: 245 mm, total length: 5,990 mm, total width: 1,250 mm, Floorplate Length: 6000mm Floorplate Width: 1250mm Height: 245mm No. Of T-slots: 5 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Dsdpjxdltuofx Aa Hecl Length: 5990mm Width: 1250mm Height: 245mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis Dedpfx Aextbf Esa Hecl 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 922006, electrical fuse: 16 A, input voltage: 400 V, power: 1.1 kW (1.50 HP), Imperator II – Multi-chamber divider GB 100-600G / 400-2,900 G Continuously adjustable, 150-2,900g (depending on dough consistency) Machine belt, belt width 280mm Discharge height 810mm Thanks to the hydraulic spring and the multi-measuring chamber, the IMPERATOR CT II offers the optimal combination of dough handling and weight accuracy. Removable components such as the discharge belt, measuring piston, and flour spreader simplify cleaning. Dsdpfxozibdye Aa Hocl We have used the machine for breads of 500 grams and 1,000 grams (dry weight). The machine can be tested on site. Sale ex works (EXW): DE 75015 Bretten (near Karlsruhe)

Condition: ready for operation (used), functionality: fully functional, The Marel Townsend TFM 630 Breading Machine is an industrial system dedicated to the uniform coating of food products before cooking or further processing. It is used in-line to apply an even layer of flour or breadcrumbs, particularly in the production of meat, poultry, or processed foods. This ensures a consistent preparation, essential for final product quality and batch uniformity. Thanks to its continuous conveyor system, the TFM 630 delivers precise flour distribution on each product. The standardized belt width enables smooth passage of items, which enhances coating consistency. As a result, the machine minimizes material waste while maximizing overall output. Furthermore, it helps stabilize production by reducing batch-to-batch variation. This breading machine integrates easily into a complete food processing line, typically installed between product preparation and cooking or frying. Its stainless steel construction provides a high level of hygiene and simplifies cleaning operations. Additionally, its continuous operation design allows increased throughput without compromising product quality. The Marel Townsend TFM 630 Breading Machine is a strategic solution for manufacturers seeking to automate coating processes while controlling costs. As a refurbished unit, it offers an excellent balance between performance, reliability, and cost-effectiveness. Technical specifications: Brand: Marel Townsend Model: TFM 630 Type: Industrial breading machine (coating) Belt width: 630 mm Power supply: 3 × 400 V Frequency: 50 Hz Construction: Stainless steel System: Continuous conveyor with uniform coating Integration: Automated line (pre-cooking or frying) Function: Flour coating / pre-breading ❓ Key points to check before investing in the TFM 630 What is the actual production capacity? Dsdpoy Na Dhsfx Aa Hscl This depends on your full line, but the 630 mm width supports continuous, industrial-scale throughput. Why choose an automatic breader over manual coating? An automatic system guarantees consistent coating, reduces product loss, and stabilizes production. Is this machine compatible with an existing line? Yes, it is typically integrated between product preparation and cooking (fryer or oven). What types of products can it process? Meats, poultry, reformed products, or any preparations requiring a consistent, homogeneous coating. U4C1ML8C

Condition: used, Manufacturer: Winkworth Model: CT 213 Type : Rotary mixer for drums Maximum product size : Ø 40 x 55 cm Product fixing : Manual Speed variation : Mechanical Mixing speed : 18 – 105 rpm Timer Mode: manual / automatic Materials: Stainless steel Dcodpfxsx R A N Aj Aa Hel Tuscan motor 0.37 kW – ATEX Class EExd II B T4

Condition: used, functionality: fully functional, machine/vehicle number: 34500, mileage: 63,900 km, power: 220 kW (299.12 HP), first registration: 06/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,450 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, suspension: air, loading space volume: 19.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power assisted steering, power mirror, tachograph, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Dsdpfx Aezkilzoa Hjcl Front axle with air suspension, steered and load-relieving trailing axle, parking brake, disc brakes, underrun protection, aluminum tank 200 liters, Ad-Blue 25 liters, rear axle with air suspension, ABS, ASR, speed limiter, 2 work lights, tire size = 315/80 R22.5, 385/55 R22.5; 4 seats, OBD, driver's comfort seat, sun visor, electric windows, air conditioning, pollen filter, digital tachograph, radio CD, roof hatch, tinted windows, heated front mirror, hill start assist, ESP, lane keeping assist, cruise control, turning assistant. Bio-drain 2", rear section locking mechanism, rear area monitoring, 2 x step, step securing device, step monitoring, 2 rotating beacons, impact protection, split comb automatic lifter with folding arms for MGB 80 - 1,300 liters, spreading mechanism Zöller Delta-2316.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 260105, saw blade diameter: 800 mm, overall weight: 2,960 kg, table length: 700 mm, Equipment: CE marking, TECHNICAL DETAILS Min. saw blade diameter: 790 mm Max. saw blade diameter: 800 mm Spindle saw blade diameter: 40 mm Infeed table length: 700 mm Outfeed table length: 700 mm MACHINE DETAILS Main motor power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,550 x 2,100 mm Dedpsxq Au Aofx Aa Hjcl Weight: 2,960 kg EQUIPMENT CE marking

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, DROP AG is selling a demonstration machine from its demo center: a digital laser exposure system, Phoenix 1213V CtS, with a maximum screen size of 1200 x 1300 mm. 2540 dpi with PDF vector option – 12700 DPI. Dedpfx Aasw T Sfks Hocl 30-watt laser with 405 nm laser. 4° DMD technology with TILT software. Inline option; the system can also be loaded manually. Suitable for screens with a frame thickness of up to 60 mm.

Condition: used, Year of construction: 2015, Second hand automatic shape glass cutting table (jumbo), Intermac Type Genius 61 CT, year 2015 Dcodpfexpia Nox Aa Hsl

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2017, total width: 2,470 mm, total height: 1,540 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2017, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Rear axle 4: Max. axle load: 9000 kg Weights Empty weight: 6.358 kg Carrying capacity: 37.642 kg GVW: 44.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: OV-84-VK = Additional options and accessories = - Air suspension Dsdpfxey Dcbfs Aa Hscl - EBS - Extandable - Lift axle - Twist-locks

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 08500, turning diameter over cross slide: 225 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, controller model: EPL 2, TECHNICAL DETAILS Maximum turning diameter: 400 mm Djdpfx Aaeyxm Tne Hscl Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Maximum torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter at front bearing: 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Maximum quill pressure: 8,000 N Feeds Rapid traverse (X/Z axis): 10 m/min Feed speed (X/Z axis): 5 m/min Feed force (X axis): 5,000 N Feed force (Z axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation