Used Maplan Mtf 1500/280 for sale (7,018)

Condition: used, Used Wolfking TSMG 1500/250 stainless steel ASI 304 / 1.4301 horizontal twin paddle mixer total capacity 1 500 ltr. Mixing chamber measures approx. 1 500 mm length x 1 600 mm width. Total lenght of mixer is 3 200 mm. Total height of mixer is 2 200 mm. There is two horizontal twin paddle agitators in the mixing chamber. Agitators speed is 20 PRM driven by two el. motors 7,5 kW. One side discharge with screw installed in the bottom of chamber driven by el. motor 55 kw, 160 PRM. Included: control panel, switchboard Bdsdozn N H Tspfx Ac Tjg

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Bedpfezhlr Eox Ac Tjdg Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, height of stroke ca. 700 - 1000 mm Bodpfxjzuggkj Ac Todg 0 500 kg

Condition: good (used), Year of construction: 2005, Serien-Nr. 571752, 4 Bearbeitungsachsen, Verfahrwege X/Y/Z 2.050 x 1.050 x 1.000 mm, Tischgröße 2.400 x 1.500 mm, Tischbelastung 10.000 kg, Maschinenbett in Grube montiert, mit T-Nut-Aufspannfläche, Elektrodenwechselsystem Typ EW15 Linear, Dielektrikum-Anlage mit Patronenfiltersystem, Ingersoll-Steuerung Typ Multipulse 64, Löschanlage Bdedpfxszq Dl Aj Ac Tog

Condition: excellent (used), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: Width 1540 mm x Height 2090 mm x Depth 1240 mm Fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Test chamber: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm Installation dimensions of the temperature test chamber with doors open Width 2340 mm x Height 2090 mm x Depth 2165 mm Feed-through opening, 2 pieces on the side wall, left: Ø 100 mm Temperature range -70°C to +180°C Heating: 3.0 K / min Cooling: 3.0 K / min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Bodpjzgah Sofx Ac Tsdg Type: 3416/17 Refrigerant: R507 / R23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, overall weight: 1,970 kg, total height: 1,700 mm, total width: 1,080 mm, total length: 2,700 mm, Distance between centers 1500 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Bodpfezdr H Uex Ac Tedg Spindle Taper Camlock D1-6 Spindle speed 25 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, total height: 3,950 mm, total width: 6,691 mm, The complete packaging line is ready for immediate use. The Rovema MVP 280/400 (2011) was fully overhauled and rebuilt in 2022/2023 by DL Packaging and has seen only limited use since then. Available for type of packaging: Block bottom bag and Pillow bag. The packaging line consists of: Bdedpszi Ebcefx Ac Tjg Product infeed conveyor Multihead weigher (10–1,000 g, up to 65 weighings/min) Rovema MVP 280/400 packaging machine (2011) Markem-Imaje printer Stand-up pouch device including 1 set of forming parts Format set for flat bags (250 mm) Discharge conveyor for finished bags Frame for stable, vibration-free installation of the multihead weigher: approx. 2800 × 2800 × 2200 (H) mm, made of painted steel, including stairs and handrails The machine is equipped with a Siemens S7 control system and operator interface and features a sealing system for heat-sealable packaging materials, including PP films as well as laminated films with a thickness of 50 to 100 µm. A complete packaging solution ready for immediate production use.

Condition: excellent (used), IPG Ytterbium Fiber Laser Bedpfx Acozd Rmao Tedg Here we offer you an IPG Ytterbium fiber laser. IPG Ytterbium Fiber Laser 90-240 VAC Type/Model Name: YLP-HP-2-1500-50-100 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2006, Clamping force: 150 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Distance between tie bars: 470 x 470 mm Mould clamping plattens (b x h) : 650 x 650 mm Ejector stroke: 175 mm Screw diameter: 40mm Injection volume: 201 cm3 Shot weight: 184 g Working hours: 33.165 h Core pullers: 1x Bjdpfxszatfrs Ac Tedg Air blast: 1x Robot interference: yes

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, working width: 1,500 mm, punching force: 28 t, workpiece weight (max.): 200 kg, sheet thickness (max.): 4 mm, working length: 3,000 mm, TECHNICAL DETAILS Maximum punching force: 280 kN Bdsdozlivijpfx Ac Tsg Working area: 1,500 x 3,000 mm Maximum sheet metal thickness: 4 mm Maximum workpiece weight: 200 kg MACHINE DETAILS Machine weight: 15,800 kg

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Bdodpfx Acjzrhhqo Tsg

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch Bdodpfxsf Sa N Us Ac Tsg -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor, control block, hydraulic control block, control unit, control valve -Hydraulic control block: control unit control valve for forklifts -Main block: type P9509818 -Valves: see photos -Dimensions: 280/110/H350 mm -Weight: 17 kg Bdjdpsgprkiofx Ac Teg

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms Bjdpfx Ajra Rrhjc Todg tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: refurbished (used), CN Centerless grinding machine ROSSI MONZA 1500 CN currently being overhauled and fully electrically/electronically retrofitted Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing Grinding wheel 350 mm * 610 mm dia This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Grinding wheel width: 350 Grinding wheel diameter: 600 CNC: Siemens Bdjdpfemmqirjx Ac Tog

Condition: used, Gear motor, electric motor, electric gear motor -Power: 0.37 kW -Diameter hollow shaft: 24 mm -Speed hollow shaft: 100 rpm -Diameter shaft: 14 mm -Speed shaft: 1500 rpm -Construction: hollow shaft -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 370/210/H175 mm Bedpfx Acec I Rk Ss Todg -Weight: 12 kg

Condition: used, Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1440 rpm -Wave SW: 17 mm Bsdpfxecf Dh Ee Ac Tedg -Construction: B3 -Protection class: EX -Dimensions: 423/290/H240 mm -Weight: 27 kg

Condition: used, Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 475 mm adjustable -Roll width: 280 mm -Dimensions: 380/380/H480 mm Bsdpfeb Hd Uuox Ac Tedg -Weight: 64 kg

Condition: used, clamping plate, clamping table, clamping cube, press table Bedpsu N Siuefx Ac Tedg -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. Bdsdpfx Aceu Nf Nzj Teg we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Workbench, work table, assembly bench Bdsdpfjd Rbtrsx Ac Teg -Width: 1500 mm -Depth: 700 mm -Height: 840 mm -Work top thickness: 40 mm -Lockable drawer: 1 -Weight: 74 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Bdedpfod S Dacsx Ac Tog -Festo type: ADVUL-80-280-PA -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Stroke: 280 mm -Max. Pressure: 10 bar -Dimensions: 355/105/H105 mm -Weight: 5.5 kg

Condition: good (used), workbench, work table, assembly bench -with: bench vise -Width: 1500 mm -Depth: 730 mm -Height without vise: 920 mm -Clamping jaws: 115 x 20 mm -Wingspan: 160 mm -Worktop thickness: 40 mm -Drawer: 1 Bodpfjfdg Ihox Ac Tjdg -Weight: 85 kg

Condition: excellent (used), PANELS RETURN SYSTEM for EDGE BANDER (Right) To combine with a single-side Edge Bander allowing the operator (worker) to always stay at the in-feed side of the machine (the processed workpiece will automatically return-back to him). Blowing Air Table, infeed and outfeed (total dimensions mm 3520 x 2560) 180° transfer (mm 3120 x 2140) with motorized roller conveyors and motorized belts Motorized carpet (mm 9080 x 1560) Panel Dimensions (MIN/MAX): Bsdpfx Acsff R Tqj Todg Length - 240 mm / 2800 mm Width - 120 mm / 1300 mm Thickness - 8 mm / 60 mm opt. up to 100 mm

Condition: good (used), Technical data: Manufacturer: TSN Year of manufacture: 1988 Serial number: 2680 Maximum planing width: 280 mm Bedpfx Acjw Sh Dtj Tedg Maximum planing height: 130 mm Spindle diameter: 40 mm Tool diameter: min. 120 mm, max. 200 mm Spindle rotation speed: up to 6000 rpm Working heads (5 units): Lower – 5.5 kW Right – 5.5 kW Left – 5.5 kW Upper – 7.5 kW Universal – 5.5 kW Feed motor: 2.2 kW, stepless speed control