Used Logiudice Forni Four-Way Duct For Gas Or Oil Furnace With 12 Outlets for sale (43,859)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1,200 units per shift! TECHNICAL DETAILS Production capacity: 150 pcs/h MACHINE DETAILS Electrical data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT Hedpsx Trlrsfx Aicofk GED Intercept Ultra / Thin frame machine i-3 – CE version Warm-edge spacer production system Production of Intercept ULTRA stainless steel, ThinPlate or BlackLine

Condition: new, V160mm/120mm L200mm Hjdpfxslp Hvho Aicjfk

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Hsdoiink Sspfx Aicefk Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: used, functionality: fully functional, machine/vehicle number: 901064066, Year of construction: 2010, operating hours: 2,637 h, load capacity: 2,000 kg, lifting height: 6,800 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,910 mm, fork length: 1,400 mm, empty load weight: 4,285 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,720 mm, Four-way reach truck Chassis number: 901064066 Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Hodewfi Ibspfx Aicofk Mast type: Triplex Condition: operational and fully functional Technical condition: very good Front tyre type: bandage Front tyre condition: 40 - 60% Rear tyre type: bandage Rear tyre condition: 40 - 60% Battery voltage: 48V Battery capacity: 775Ah Battery type: PzS Year of battery: 2010 Battery condition: 20 - 40% Description: The machine is sold in good, ready-to-operate condition with new UVV inspection. See video: youtube/watch?v=eU4oMhukxMY Fork positioner, 3rd valve,

Condition: used, functionality: fully functional, machine/vehicle number: 62.054, Year of construction: 2009, operating hours: 777 h, load capacity: 3,500 kg, lifting height: 6,090 mm, free lift: 2,500 mm, fuel type: electric, mast type: triplex, construction height: 3,550 mm, fork carriage width: 2,850 mm, fork length: 1,200 mm, empty load weight: 4,970 kg, total length: 3,000 mm, drive type: Elektro, construction width: 1,500 mm, Four-way side loader Chassis number: 62.054 Load center: 600 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 150 4.5-8 Front tire condition: 80 - 100% Rear tire type: Superelastic Hjdjzr Amzspfx Aicjfk Rear tire size: 200 50-10 Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 930Ah Battery year of manufacture: 2022 Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts, and terminal tractors in our warehouse in Oldenburg. Visit our website - hinrichs-Forklifts. Leasing, lease-purchase, and financing at fair conditions are always possible for us. We would also be happy to buy your used vehicle outright, even without you purchasing a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed advice on this MAKE - MODEL. By the way: Our specialized forklift workshop focuses on the repair and maintenance of large equipment starting from 8 tons. We would also be happy to offer your vehicle for sale on consignment at our facility. Fork positioner, L = 2,850mm W = 2,200mm

Condition: used, functionality: fully functional, machine/vehicle number: BME8879, Year of construction: 2020, operating hours: 3,880 h, load capacity: 2,500 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,350 mm, fork length: 800 mm, empty load weight: 4,970 kg, total length: 3,000 mm, drive type: Elektro, construction width: 1,500 mm, Four-way side loader Chassis number: BME8879 Fork width: 125 mm Fork thickness: 45 mm Hjdpszhyqpefx Aicofk Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid tires Front tire size: 2 x 343x135 Front tire condition: 40 - 60% Rear tire type: Solid tires Rear tire size: 4 x 250 x 80 Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 620Ah Battery year of manufacture: 2020 Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts & terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-purchase, and financing at fair terms are always possible for us. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed information about this MAKE - MODEL. By the way, our specialist forklift workshop is specialized in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,601 h, load capacity: 4,500 kg, lifting height: 4,630 mm, free lift: 2,320 mm, fuel type: diesel, mast type: duplex, construction height: 3,320 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 6,640 kg, total length: 2,480 mm, drive type: Diesel, construction width: 2,620 mm, Four-way side loader Load center: 600 Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Hedpezk R Hgofx Aicofk Front tire type: Superelastic Front tire size: 2.50-15 Rear tire type: Superelastic Rear tire size: 200/50-10 Description: In addition to this Hubtex model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable conditions are always possible for us. We will also gladly buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this DQX45-D. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sales at our premises. Fork positioner, Fork positioner adjustment range: 500/1,250 mm Heater, full cabin, full free lift.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 10,490 h, load capacity: 5,000 kg, lifting height: 6,050 mm, free lift: 2,160 mm, fuel type: electric, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,800 mm, fork length: 1,800 mm, empty load weight: 11,758 kg, total length: 3,640 mm, drive type: Elektro, construction width: 2,900 mm, Four-way side loader Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2025 Description: In addition to this Hubtex model, we currently have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk locations. Visit our website – sago-online. Lease-purchase and financing under attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you don’t purchase a machine from us. Our owner, Mr. Peter Sawitzki, will be pleased to give you in-depth advice regarding this MQ50. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons. We can also display your vehicle with us on a commission sale basis. Fork positioner Fork positioner opening range: 500 / 3,800 mm Full free lift Hodpfey Sqcmox Aicefk Platform height: 580 mm

Condition: new, power: 316 kW (429.64 HP), first registration: 06/2024, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, total length: 9,110 mm, total width: 2,500 mm, total height: 3,800 mm, loading space volume: 11 m³, Year of construction: 2024, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Power Take-Off (PTO) - Windshield = Notes = Fuel tank: 290 liters Air conditioning Equipped with a water tank with a capacity of 10,500 liters Container frame for water tank, secured with twist locks, 20 ft Tank manufacturing year: 1999 Side-mounted engine enclosed in a housing Dual manhole covers on top for easy access Two rear ladders: one mounted on the chassis and one mounted on the container Support legs for freestanding water tank container Hfjdszq D Tgopfx Aicsk = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Transmission Gearbox: ZF16TX2240TO, automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 14,000 kg Payload: 19,500 kg Gross Vehicle Weight (GVW): 33,500 kg Functional Number of compartments: 1 Pump: Yes

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 600 h, load capacity: 6,000 kg, lifting height: 5,552 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,845 mm, fork length: 1,400 mm, For sale is a high-quality 4-way forklift / sideloading forklift from the renowned brand Combilift. This machine is particularly impressive due to its exceptionally low operating hours of only approximately 600 hours and is, therefore, in very good condition. Combilift is one of the world's leading manufacturers of 4-way and multi-directional forklifts. The machines are primarily used where long or bulky goods, such as steel profiles, pipes, wood, plastic profiles, or sheet materials, need to be safely and efficiently transported. Technical specifications: Manufacturer: Combilift Hjdpfovfp Dqsx Aicefk Type: C6000-14-55 SL Year of manufacture: 2015 Load capacity: 6,000 kg Lifting height: 5,550 mm Operating hours: only approx. 600 hours Drive: Gas Full cabin Heater Fork positioner Hydraulic valve Work lights at the front and rear Safety strobe light at the front and rear Double holder for gas cylinders The machine has been used very little and, due to its extremely low operating hours, represents a rare opportunity. The offered forklift is ideally suited for use in the steel trade, metal construction, timber trade, window construction, logistics, warehousing, and many other industrial applications. Inspection and functional testing are expressly welcome. Scope of delivery: as shown in the pictures or as described. Inspection is possible at any time by prior appointment. Collection in Bremen. _____ Our general terms and conditions apply. Furthermore, the seller is not liable for typographical or data transmission errors. The information and images have been provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial businesses and without warranty.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 8,632 h, load capacity: 4,000 kg, lifting height: 6,800 mm, free lift: 2,060 mm, fuel type: gas, mast type: triplex, construction height: 3,280 mm, fork carriage width: 3,100 mm, fork length: 1,150 mm, empty load weight: 6,100 kg, total length: 2,620 mm, drive type: Treibgas, construction width: 2,440 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Hodpfx Aezq H Umsicjfk Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 200/50x10 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Combilift model, we have around 200 heavy duty forklifts, compact forklifts, forklift trucks, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always possible for us. We also gladly purchase your used machines directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C4000. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We are also happy to offer your vehicle on consignment sale in our facility. Fork positioner, Fork positioner opening range: 660 / 3001 mm; Full free lift, Platform height: 540 mm

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 10,513 h, load capacity: 4,000 kg, lifting height: 7,020 mm, free lift: 630 mm, fuel type: electric, mast type: simplex, construction height: 4,400 mm, fork carriage width: 2,880 mm, fork length: 1,785 mm, empty load weight: 7,747 kg, total length: 3,170 mm, drive type: Elektro, construction width: 2,760 mm, Four-way side loader Load center: 700 Fork width: 150 mm Hfodjv Utl Ropfx Aicsk Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Battery voltage: 80V Battery capacity: 620Ah Battery year of manufacture: 2013 Description: In addition to this Hubtex model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We will also gladly purchase your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this MQ40. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sales. Fork adjustment device, Platform height: 420 mm

Condition: used, Year of construction: 2009, 3520 kW Operating weight max. 120.000 ca. 55.000 kg Unladen weight of the kiln car ca. 40.000 Usable dimensions 4000x1500x10500 Clear dimensions 5.000 x 2.575 x 11.275 External dimensions 7.100 x 7.245 (mit Türpor 550 – 1.100 °C Max. permissible oven chamber temperature 1.150 Safety cut-off temperature 1.180 Complete System – Industrial Heat Treatment Line with 6 Identical Bogie Hearth Furnaces and Quenching System For sale is a complete industrial heat treatment system consisting of 6 identical bogie hearth furnaces type HW150-3520-1100, including an integrated quenching system and complete central plant equipment. The offered system represents a fully coordinated industrial production solution for demanding thermal processing applications. All six bogie hearth furnaces are of identical design, ensuring consistent process conditions, high operational availability, and excellent interchangeability of components. The complete system includes not only the six high-performance bogie hearth furnaces but also the required central plant components and auxiliary systems, including burner systems, combustion air supply, exhaust gas extraction, temperature control and monitoring systems, as well as the complete furnace and bogie equipment. With a rated heating capacity of 3,520 kW per furnace, an operating temperature range of up to 1,100 °C, and a maximum load capacity of up to 120,000 kg per furnace, this system provides a powerful solution for large-scale industrial heat treatment processes. The combination of six identical furnace units together with the integrated quenching section offers: High production capacity through parallel operation of multiple furnace units Reliable and repeatable heat treatment processes Flexible handling of different charge sizes Centralized and coordinated plant utilities Robust industrial design for continuous production environments The system is offered as a complete turnkey heat treatment solution and provides an immediately deployable production platform for industrial applications requiring high capacity, process reliability, and consistent thermal treatment results. Technical Data 7.1 Furnace Housing Dimensions External dimensions1: 7,100 x 7,245 (incl. door portal) x 12,745 mm Clear dimensions: 5,000 x 2,575 x 11,275 mm Usable dimensions: 4,000 x 1,500 x 10,500 mm Workpiece supports: 6 units, height 475 x 340 mm 7.2 Weights Empty weight of housing: approx. 55,000 kg Empty weight of hearth car: approx. 40,000 kg Operating weight: max. 120,000 kg Weight of supports: 6 units at 5,083 kg each = 30,500 kg 7.3 Performance Data Nominal heating capacity: 3,520 kW Temperature control range: 550 – 1,100°C Max. permissible furnace chamber temperature: 1,150°C Safety cut-off temperature: 1,180°C Heating rate: max. 60 K/h at 120,000 kg operating weight Max. permissible heating rate: 60 K/h Number of temperature control zones: 6 All dimensions: width x height x depth or Ø x height. Utility Supply Parameters Hjdpfx Aezpbmboicofk 7.4.1 Natural Gas Calorific value Hu(n): 10.6 kWh/m³(n) Gas inlet pressure: 2.0 bar Max. volume flow: 334 m³(n)/h / 118 m³(b)/h Temperature: +5 to +25°C. 7.4.2 Combustion air Composition: Ambient air Combustion air pressure: max. 100 mbar Max. volumetric flow rate: 11,500 m³(n)/h Temperature: +5 to +40°C 7.4.3 Power supply Voltage: 400 V Mains frequency: 50 Hz Connected loa...

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 3,220 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,860 mm, load center: 800 mm, fuel type: electric, mast type: duplex, battery capacity: 930 Ah, battery voltage: 48 V, fork carriage width: 2,840 mm, fork length: 1,600 mm, ground clearance: 130 mm, turning radius (outer): 1,950 mm, total height: 2,710 mm, total length: 2,840 mm, total width: 2,670 mm, color: white, Equipment: cabin, Electric four-way reach truck HUBTEX MQ 30, first owner, in very well-maintained condition: – Model MQ 30 AC / Series 2125-EL (larger model series) – Designed for the transport and stacking of wood-based panels – Load capacity 3000 kg at LSP 800 mm to H3 5000 mm – Load capacity 2670 kg at LSP 1050 mm to H3 5000 mm – NB = 1600 mm useful width – MV = 1700 mm mast extension – RB = 2670 mm frame width – b1 = 1040 + 30 mm front dimension – b2 = 1070 mm front dimension with reinforced fork carrier Hfsdszugt Repfx Aicek – RL = 2440 mm frame length – KÜ = 180 mm cab overhang – GL = 2840 mm overall length over fork carrier – Ra = 1340 mm wheel arm clearance – SH = 2500 mm height above driver protection roof (+300 mm) – Rh = 500 mm height wheel arms – BF = 130 mm ground clearance lower mast – Wa = 1950 mm turning radius – 3-stage lift mast H 60 TIL (very stable) – H1 = 2707 mm height of lift mast retracted – H2 = 1867 mm free lift – H3 = 5000 mm lift height (top of fork tines) – H4 = 5840 mm height of lift mast extended – VH = 840 mm height fork carrier – Intermediate lift limitation at H3 = 3900 mm – Long load fork carrier Type II, GTL = 2840 mm – Fork carrier in low and reinforced design – Fork adjustment hydraulically from 560 to 2840 mm (adjustable forks) – Fork tilt hydraulically +5 / –3 degrees – Fork tines (pair) length 1600 mm – Fork cross-section 50 x 150 mm – Multi-directional steering system H4 electronically controlled – 4 steering programs with longitudinal/lateral travel and circular/diagonal travel – Service brake as an automatic regenerative brake – Parking brake as an electro-magnetic parking brake – 4-wheel chassis with two vertical motors and heavy-duty load wheels – 2-piece swing axle with mechanical level compensation – Tires, drive side 2 x 457 x 200 mm Super-Elastic – Tires, load side 4 x 381 x 127 mm solid rubber – Motor control with three-phase motor and inverter – Drive power 2 x 4.0 kW – Working hydraulics with proportional valve technology, continuously adjustable – Lift power 14.0 kW – Steering power 4.0 kW – Operation via multi-function joystick – Driver's cabin as a lateral seat cabin Q850 with 830 x 850 mm – Entry and exit on the racking aisle side – Driver protection roof with laminated safety glass – Safety glass on the load side, front, and battery side – 2 work spotlights on the cabin roof – Comfort seat, vibration-damped, adjustable in multiple ways – On-board computer Hubtex HIT 2 – Paint finish RAL 9002 grey-white and RAL 7021 black-grey – Battery 48V 6EPzS 930 Ah – Battery charger D400G48/125 for 12-14 hours charging time – Aquamatic and filling station – Battery 48V 6PzS 930 Ah with tray renewed in 03/2021 – Year of manufacture 2006, operating hours original 3220 h – First owner, very well-maintained condition – Truck always stored in a heated hall – Regular maintenance by Hubtex – Last maintenance in 08/2025 at 3100 h – New maintenance possible upon agreement – Application was for feeding a wood-based panel saw – Sale due to automation of the panel saw – Inspection and test run possible upon agreement – Sale from location Karlsruhe / Southern Germany

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,444 h, load capacity: 3,000 kg, lifting height: 4,120 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,900 kg, total length: 1,940 mm, drive type: Diesel, construction width: 2,200 mm, Four-Way Side Loader Load Centre: 600 Fork Width: 150 mm Fork Thickness: 50 mm Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Cushion Front Tyres Size: 16x7x10.5 Rear Tyres Type: Superelastic Rear Tyres Size: 23x10-12 Hodpfx Asznpc Isicsfk Description: In addition to this COMBILIFT model, we currently have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance and side loaders available in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing on favourable terms are always possible. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our proprietor, Mr Peter Sawitzki, will be pleased to provide you with comprehensive advice on this C3000. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul and custom builds for forklifts from 8 tonnes upwards. We can also exhibit your vehicle for consignment sale upon request. Fork Positioner, Full Cabin, Platform Height: 490 mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,799 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, fork carriage width: 1,250 mm, fork length: 600 mm, empty load weight: 5,024 kg, total length: 2,950 mm, drive type: Elektro, construction width: 1,640 mm, Four-way side loader Load center: 350 Fork width: 125 mm Fork thickness: 40 mm Mast type: Standard Condition: Ready for use and fully functional Hfedpfx Aiswkxgdocek Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery Ah: 620Ah Battery year of manufacture: 2013 Description: In addition to this Bulmor model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this EMU 25 ST GT N. LK6.7 P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We also offer consignment sales for your vehicle. Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,902 h, load capacity: 2,400 kg, lifting height: 4,150 mm, fuel type: electric, mast type: simplex, construction height: 2,940 mm, fork carriage width: 2,575 mm, fork length: 1,000 mm, empty load weight: 6,525 kg, total length: 3,350 mm, drive type: Elektro, construction width: 2,150 mm, Four-way side loader Load centre: 500 Fork width: 125 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Hodpfxox Stmuj Aicsfk Battery voltage: 80V Battery capacity: 620Ah Battery year: 2020 Description: In addition to this Votex-Bison model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing on attractive terms are always available. We also buy your used vehicle directly, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this Compact 2504. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment, and custom modifications for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for consignment sale in our warehouse. Fork positioner Platform height: 430 mm

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 9,871 h, load capacity: 5,000 kg, lifting height: 6,040 mm, free lift: 870 mm, fuel type: electric, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,760 mm, fork length: 1,620 mm, empty load weight: 10,694 kg, total length: 4,200 mm, drive type: Elektro, construction width: 2,770 mm, Four-way sideloader Load center of gravity: 800 Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Drums Front tires size: 660/250-480 Rear tires type: Drums Rear tires size: 413/178-285.8 Battery voltage: 80V Battery Ah: 775Ah Battery year of manufacture: 2017 Hjdpfsu Dy A Eex Aicsfk Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 50/18/60 STC8.5. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. Fork positioner, Platform height: 530 mm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 427 h, load capacity: 2,000 kg, lifting height: 4,980 mm, free lift: 1,240 mm, fuel type: electric, mast type: triplex, construction height: 2,910 mm, fork carriage width: 3,160 mm, fork length: 1,795 mm, empty load weight: 10,036 kg, total length: 3,530 mm, drive type: Elektro, construction width: 3,460 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Hjdpsyvwcusfx Aicsfk Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Cushion tires Battery voltage: 80V Battery capacity: 775Ah Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing under attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this PKD 20/21/50. P.S.: Our master workshop specializes in repair, maintenance, overhaul, and customization for forklifts starting at 8 tons. We are also happy to offer your equipment for consignment sale at our premises. Fork positioner, Full free lift, Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 7,009 h, load capacity: 3,000 kg, lifting height: 4,550 mm, free lift: 2,130 mm, fuel type: gas, mast type: duplex, construction height: 2,830 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 1,930 mm, drive type: Treibgas, construction width: 2,270 mm, Four-way sideloader Load center of gravity: 600 Fork width: 150 mm Fork thickness: 45 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Bandages Front tires size: 16x7x10,5 Hfjdpfxovg Taxj Aicjk Rear tires Type: Superelastic Rear tires size: 23x10-12 Description: In addition to this Combilift model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this C3000 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Heating, full cab, full free lift, Platform high: 480 mm

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 14,440 h, load capacity: 3,000 kg, lifting height: 4,600 mm, free lift: 2,180 mm, fuel type: gas, mast type: duplex, construction height: 2,850 mm, fork carriage width: 1,200 mm, fork length: 1,400 mm, empty load weight: 5,300 kg, total length: 2,000 mm, drive type: Treibgas, construction width: 2,470 mm, Four-way Side Loader Load Center: 600 mm Fork Width: 150 mm Fork Thickness: 50 mm Mast Type: Duplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Cushion tyres Front Tyres Size: 16x7-10.5 Rear Tyres Type: Superelastic Rear Tyres Size: 23x10-12 Hjdpfx Aszdv Tfsicefk Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock in our warehouses in Hamburg and Gdańsk. Visit our homepage at sago-online. Lease-purchase and financing on favourable terms are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C3000. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for commission sale at our premises. Sideshift fork positioner, Heater, Full cabin, Full free lift, Platform height: 500 mm

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Hjdpfx Asq Ttz Eoicefk

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,071 h, load capacity: 2,500 kg, lifting height: 5,600 mm, fuel type: electric, mast type: simplex, construction height: 3,510 mm, fork carriage width: 1,520 mm, fork length: 770 mm, empty load weight: 7,100 kg, total length: 3,350 mm, drive type: Elektro, construction width: 2,150 mm, Four-way side loader Load center: 530 Fork width: 150 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Hfjdpfxjyvwczs Aicsk Battery capacity: 775Ah Battery year: 2023 Description: In addition to this Votex - Bison model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always available. We are also pleased to purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice about this compact model. P.S.: Our master forklift workshop is specialized in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons onwards. We can also consign your vehicle for sale at our facility. Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 9,984 h, load capacity: 5,500 kg, lifting height: 6,540 mm, free lift: 2,280 mm, fuel type: electric, mast type: triplex, construction height: 3,420 mm, fork carriage width: 3,460 mm, fork length: 1,800 mm, empty load weight: 10,776 kg, total length: 3,300 mm, drive type: Elektro, construction width: 2,940 mm, Four-way side loader Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2021 Description: In addition to this Hubtex model, we currently have around 200 heavy-duty forklifts, compact forklifts, standard forklifts & side loaders available in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing at attractive rates are always possible. We are also happy to purchase your used machines outright, even if you do not buy a unit from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail regarding this MQ55. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom construction for forklifts from 8 tons upwards. We are also happy to consign your vehicle for sale in our facility. Fork positioner, Hodpfxey Sqcto Aicjfk Fork positioner opening range: 560 / 3,460 mm Full free lift, Platform height: 410 mm

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 2,015 h, load capacity: 3,000 kg, lifting height: 5,600 mm, fuel type: electric, mast type: triplex, construction height: 2,440 mm, fork length: 1,150 mm, drive type: Elektro, Four-way reach truck Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery year of manufacture: 2024 Hfjdpfx Aszt Dyxeicsk Side shifter, fork positioner, 3rd valve, 4th valve.