Used Lbm Hydraulic Press for sale (26,226)

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm Crodpfx Acszbvm Ie Teg control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of manufacture: 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 bar - Distance between uprights: 4100 mm - Max. bending length: 6000 mm - Overhang: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance between tool clamping surfaces: 300 - 800 mm Hydraulic pumps: - Main pumps: 2 x 22 kW - Delivery rate at idle: 2 x 153 l/min - Delivery rate at full load: 2 x 33 l/min - Control pump: 0.75 kW Installation: - Footprint (W x D): 6960 x 3250 mm Credpfx Acezf Hnie Tog - Height above ground: 4100 mm - Undercarriage, front: 2200 mm - Undercarriage, rear: 600 mm - Operating voltage: 3 x 400 V / 50 Hz - Machine weight: 51000 kg

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. Credpeg Iihwjfx Ac Tog SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Year of construction: 2001, condition: good (used), Offer 20202 Technical data: - max. pressing force 35 t - projection to the center of the ram 240 mm - working height adjustable with hand crank 540 to 940 mm - 2 hand controls - protective screen enclosure with light barrier - material - insertion device - pneumatic connection Codpfx Acep Dt Tae Torg - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Csdezxwzmspfx Ac Tjrg Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm Crjdpfx Acjyuylnj Teg - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm Cedpfoupbdgsx Ac Tjrg -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Cjdpfow U U Svjx Ac Torg * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Crsdpoyabf Hofx Ac Tsg

Condition: used, Year of construction: 2008, Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control system - 3 controlled axes (Y1, Y2, X) - manual Wila crowning table - 2 adjustable support arms - light barriers - incl. bending tools & operating manual - year of manufacture 2008 Technical data - Press capacity: 40 t - Bending length: 2050 mm - Distance between uprights: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Overhang: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V Csdpfx Acjzl Tkdo Terg - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg

Condition: new, Year of construction: 2026, functionality: fully functional, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, control type: CNC control, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Codjxhc Spopfx Ac Terg Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Automatic height adjustment (R axes) Automatic crowning table Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit cat IV Standard configuration and equipment : Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Warranty 2 Years EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Crjdedyynvepfx Ac Teg Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: excellent (used), Year of construction: 1960, pressure 25 t Crsdpsyrtwfsfx Ac Tjg weight of the machine ca. 25 t

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Crsdpfx Aon Awd Rjc Teg Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 160 t, pressure:160 t stroke:600 mm total power requirement:7,5 kW weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm Csdefxyi Iepfx Ac Tsrg table height:850 mm table load:5 t pre-running speed:1 bis 9,8 mm/sec return speed:1 bis 9,8 mm/sec quantity of oil:220 l

Condition: used, Year of construction: 1999, Hydraulic press Dunkes HEZ 100-40, year of manufacture 1999 Cedpozu Arvofx Ac Tsrg Hydraulic press Dunkes HS2 63, year of manufacture 1999 Eccentric press Ebu 75, year of manufacture 1985

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: Csdpfjxaabfjx Ac Terg * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: excellent (used), Year of construction: 2001, year 2001 price POA stock no. 01859 specification Crsdpfxozbqn He Ac Teg 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE HIGH SPEED LONG STROKE MODELSTOCK NO 02029 description TYPE HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 80 TONS CONTROL OP 2000 NO OF AXIS SEVEN BENDING LENGTH 2500mm OPEN HEIGHT 620 STROKE LENGTH 350 THROAT DEPTH 420 MOTOR SIZE15 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK SIDE INTERLOCKED FENCING REAR INTERLOCKED SERIAL NUMBER V011137 MAX APPROACH SPEED 200 MAX BEND SPEED 20 MAX RETURN SPEED 200

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 120 mm, table length: 3,200 mm, throat depth: 230 mm, ram plate length: 3,200 mm, distance table to ram: 390 mm, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125 × 3200 MTP-3212 Touchscreen Control The MTP 125 × 3200 hydraulic CNC press brake is designed for accurate and efficient sheet-metal bending. It delivers 125 tonnes of pressing force and offers a maximum bending length of 3200 mm. The machine can process sheet metal up to 6 mm thick. Crsdoytp N Hopfx Ac Tsg It is suitable for workshops and manufacturers operating in electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive, aerospace and other metalworking sectors. CONTROL AND EQUIPMENT - X-axis back gauge with servo drive - Y-axis beam adjustment with servo drive - Manual R-axis back-gauge finger height adjustment - Back-gauge travel: 600 mm - Two front material supports - AMADA-style quick punch-clamping system - Mobile controller - Control panel mounted on a movable arm - LED working-area lighting MTP-3212 CNC CONTROLLER The MTP-3212 features a large colour touchscreen and an intuitive, user-friendly menu. The software automatically calculates the bending angle, simplifying machine setup and improving production efficiency. The controller can store data for up to 40 punch types. HIGH-QUALITY COMPONENTS The hydraulic system uses high-quality German Rexroth valves. The electrical system incorporates Schneider Electric components, while safety components are supplied by Omron and Schneider. Steel hydraulic connections significantly reduce the risk of future leaks. SAFETY EQUIPMENT - Clearly visible safety markings - Side guards - Rear safety gate - Easily accessible emergency-stop switches - Safety light curtain preventing accidental access between the punch and die The machine is supplied with a Polish-language operating manual and a CE Declaration of Conformity. TECHNICAL DATA - Maximum sheet thickness: 6 mm - Pressing force: 125 t - Maximum bending length: 3200 mm - Distance between columns: 2700 mm - Throat depth: 320 mm - Ram stroke: 120 mm - Maximum opening height: 390 mm - Back-gauge travel: 600 mm - Motor power: 7.5 kW - Weight: 7500 kg - Dimensions (L × W × H): 3870 × 1550 × 2400 mm - Front supports: 2 - Controller: MTP-3212 - Punch clamping: AMADA-style quick clamping TECHNICAL SUPPORT Our specialists can assist with planning bending sequences for complex parts, selecting suitable materials and tools, and choosing optimal working parameters. Pre-purchase technical consultation is also available to help select the correct machine and accessories. Delivery can be arranged. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation.

Condition: used, functionality: fully functional, COLMAL hydraulic press brake 3000x250 ton, 4 axes, throat 300 mm. Dimensions: 380x350x180 (H) cm, weight 14,100 kg. Csdowyng Sspfx Ac Terg

Condition: used, Year of construction: 2021, Technical details: voltage: 400/50 V/Hz air-pressure connection: - bar control: - capacity: 150 kg/h Crsdpjy N R Hmjfx Ac Tsg protection class: IP 20 temperature range: 0 - 40 °C sound level:

Condition: new, Year of construction: 2024, neu 2024 7307 September 2026, Zwischenv Italien 11400 € 197.76 € 1 10300 € 100 to horizontal verschiebbar 500 mm 900 mm 1050 mm 25 mm/s 2 mm/s 2 kW 1900 mm 1000 mm 2400 mm 1250 kg 650 mm STROKE 500 MM Cjdpswiqu Defx Ac Tjrg 2 speeds machine table can be liftet with chains control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 2000, pressing force: 1,600 t, total length: 6,000 mm, total width: 3,000 mm, total height: 8,000 mm, overall weight: 200,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Cedpfx Acozxkrrj Tjrg Pressing force max.: 1,600 t Dimensions (LxWxH) approx.: 6000 x 3000 x 8000 mm Weight approx.: 200,000 kg Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm Csdpfxstqqq Re Ac Tjrg stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Cedpeifkldsfx Ac Terg Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.