Used Junkers Cylindrical Grinding Machine - Universal for sale (66,550)

Condition: good (used), Jones and Shipman Suprema 650 M Easy Universal OD/ID Cylindrical Grinder s/n SO19131, w/ J&S PLC Control, 12" Swing x 25" Centers, Swivel Wheelhead w/ OD & ID Capability, Internal Spindle, Hydromation Coolant System, Heidenhain DRO, Workholding NOT Included Kedoywfyqepfx Adqjdr

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Kdsdpfx Aeuxfu Nodqor Pr...

Condition: good (used), Year of construction: 2021, operating hours: 5,500 h, grinding length: 600 mm, grinding diameter: 440 mm, feed length X-axis: 325 mm, feed length Z-axis: 750 mm, Control system, serial number and main data o Control system: SIEMENS, Type 840 D SL o Operating hours recorded: 5,475 Travel ranges o X-axis travel: 325 mm o Z-axis travel: 750 mm Axis speeds o X and Z axes max.: 15,000 mm/min o X and Z axes min.: 0.01 mm/min Kdjdpfjzgdtlex Adqor Working area o Max. grinding length: 600 mm o Max. grinding diameter: 440 mm o Min. grinding diameter: 10 mm Performance data o Grinding spindle: 1 tool for external cylindrical grinding o Tool dimensions: Ø 610 x 160 x 304.8 mm o Cutting speed: 60 m/s o Power: 15 kW Workpiece spindle o Speed range: 30 - 5,000 min⁻¹ o Taper: 5 Morse Tailstock o Design: pneumatic o Max. quill stroke: 80 mm o Taper: 5 Morse Connection values o 400 V / 50 Hz / 71 A / 43 kW Automation / Peripherals • Handling robot, YASKAWA, Type YR-1-06VXH12-A00, year of manufacture 2022, serial number 6V2272528290001 • Automation system / workpiece storage, EGS AUTOMATION DANOBAT, Type CG600-BL1, year of manufacture 2023, serial number 190605-6, 2-position • Filter, 3FS, Type M1600, No. 565209, year of manufacture 2021, weight 85 kg • Oil band filter, MICROFILTER, Type EASYBAND 150, serial number 0202, year of manufacture 2021 • Pump, REXROTH, Type HM-46

Condition: good (used), Hydraulic cylindrical grinding machine Center height 100 mm Center width 500 mm Grinding wheel diameter min./max. 200 - 300 mm 3 grinding wheel revolutions 2,250 - 2,420 - 2,680 rpm Workpiece spindle head: 8 workpiece speeds, adjustable 30 - 750 rpm. Spindle taper or inner taper of the workpiece spindle MK 4 Tailstock: Inner taper of quill MK 3 Quill travel 30 mm Table: Maximum table inclination +/- 6° Table speed, adjustable 0.1 - 6.0 m / min. Motor power 3 kW Ksdper E Aziefx Adqsdr Dimensions L x W x H 1650 x 1350 x 1400 mm Weight 1900 kg Accessories / Special features: - Manual or automatic operation - Automatic infeed - Grinding wheel flange with grinding wheel - Wet grinding device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: ready for operation (used), An external cylindrical grinding machine Kellenberger is available. Distance between centers: 1000mm, center height: 175mm, max. workpiece diameter: 250mm, travel X/Z: 1000mm/220mm, grinding wheel diameter: 500mm, speed: 1530rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1750mm, weight: approx. 3150kg. A viewing on site is possible. Ksdpfx Adoxxzi Ioqedr

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Kdsdpfx Aeuxfucodqsr Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: good (used), functionality: fully functional, Used Kellenberger cylindrical grinding machine for sale in very good condition. Price significantly reduced !!!!! Ksdpfew Dzbdex Adqsdr

Condition: new, functionality: fully functional, Topking X-25 CNC Cylindrical Grinding Machine Topking “The X-25 CNC cylindrical grinding machine is the perfect answer for UK manufacturers facing space constraints,” explains Simon Rood. “Unlike traditional T-type base designs, the X-Series utilises a revolutionary cross-slide structure. This design allows the X-25 to reduce floor space requirements by over 30% while significantly enhancing stability. It is a superior choice when space is limited, making it ideal for busy production environments where every square metre counts.” Machine overview INTRODUCTION Compact CNC cylindrical grinding machine with an impressive capacity. The X series CNC cylindrical grinding machine integrates advanced design and innovative features, offering efficient, precise, and flexible machining solutions. This grinder can meet various processing needs and ensure high-quality results for small or large components. The X-axis and Z-axis of the X-series CNC cylindrical grinding machine adopt a cross-slide design, effectively reducing the footprint and axial travel, thereby saving production space. The high-rigidity machine body and the heavy-duty spindle and tailstock significantly increase the component load capacity. The high rigidity machine body ensures stability during grinding, providing high-quality machining results. The operating system is equipped with a high-performance CNC control system and a built-in graphical user interface (GUI), making setup easy and enabling users to operate with ease. The grinding applications are extensive, offering customers the most suitable machining solutions. Specification Kjdpsubbqisfx Adqedr Swing (Max) 270mm Distance between centres 200mm Grinding Diameter (Max) 250mm Weight between centres (Max) 5kg CNC Control System FANUC or Mitsubishi CNC Controls

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Kdedpfxezuxt Ao Adqsr Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Kedpeywftdofx Adqedr

Condition: defective spare-parts repository (used), We offer you: Cylindrical grinding machine Manufacturer: Karstens For spare parts The main spindle grinding head is missing Kjdpfx Ajxxxrtsdqedr Accessories, illustrated tools, and clamping devices are only included if stated in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Condition: ready for operation (used), A Joerg CNC precision cylindrical grinding machine for tools and rotationally symmetrical precision parts is available. Workpiece diameter range: 0.1mm-16mm, Speed: 10000rpm, Workpiece holding: W20/W25, Max. workpiece length: 250mm. Machine dimensions X/Y/Z: approx. 1900mm/2000mm/1950mm, Weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Kdjdezhb Ebepfx Adqsr

Condition: used, Year of construction: 2000, grinding diameter 300 mm grinding length 1200 mm workpiece turning speeds 6000 U/min max. workpiece weight 70 kg control FANUC peripheral speed 140 m/sec grinding wheel size CBN 400 x 5 mm Spindle power 24 kW weight of the machine ca. 11 t Quickpoint 5002/10 CNC external cylindrical grinding machine, built in 2000 - Regular maintenance carried out - Documentation available Special accessories: Kdodpfx Aoy Dibxodqjr - Junker novotecnic cooling lubricant system - 2x LTA II R/H extraction systems - Hyfra recooler - 4 grinding wheel blanks - Oil pan with grating *Disclaimer: All information is non-binding and may be incomplete or inaccurate. Subject to change without notice. No liability is accepted for the accuracy or completeness of the information provided. The disclosure or transfer of the data provided by us is not permitted without our express written consent. Translated with (free version)

Condition: good (used), functionality: fully functional, Stanko 3A151 Cylindrical Grinding Machine For sale is a high-quality cylindrical grinding machine, type Stanko 3A151. The machine is suitable for the precise external cylindrical grinding of cylindrical workpieces as well as flat cones and is ideal for use in workshops, toolmaking, series production, and maintenance. Technical data: Max. workpiece diameter: 200 mm Max. workpiece length: 700 mm Max. grinding length: 630 mm Center height: 110 mm Max. workpiece weight: 30 kg Table travel: 650 mm Continuously adjustable table speed: 100–6000 mm/min Grinding wheel diameter: 450–600 mm Max. grinding wheel width: 63 mm Grinding spindle speed: 1112 / 1272 rpm Workpiece spindle speed: continuously adjustable 63–400 rpm Travel of grinding head: 200 mm Main drive grinding spindle: 7.5 kW Number of electric motors: 7 Machine dimensions (L × W × H): 3100 × 2100 × 1500 mm Machine weight: approx. 4,200 kg Equipment and features: Kjdpfxszcg H Is Adqedr Hydraulic table drive Automatic and manual transverse feed Rapid traverse of the grinding head Hydraulic tailstock quill Cooling system Lubrication system Magnetic separator Suitable for longitudinal and plunge grinding High precision and robust industrial design Condition The machine is in technically perfect condition. It is ready for immediate use and impresses with its robust construction and high grinding accuracy. Inspection and test run possible by appointment. Available from week 30.

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: Kdjdpfsyx Hx Dex Adqor 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: used, grinding diameter 250,350,450 mm grinding length 1000 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±8 ° longitudinal feed of the table 1300 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not Kdjdpod Ih D Hofx Adqjr only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your sion R: Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse sowie Luftabhebung im Schleifspindelstock. Beispielfoto einer von uns überholten 600U -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Overhauled with geometric KELLENBERGER protocoll. Standard with: -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 350,450 mm grinding length 600 mm centre height 175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±10 ° longitudinal feed of the table 900 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine mit eventuell anderen Optionen. Maschine hat Zentralschmierung und Rollenführung in der Flachbahn der x-Achse sowie Luftabhebung im Schleifspindelstock serienmäßig. BEMA Standard serienmäßig: -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my -Drehzahlanzeige Schleifspindel -Stufenlose Drehzahl Schleifspindel 70-100% -Stufenlose Drehzahl Innenschleifspindel 70-100% -Werkstückspindelantrieb durch Drehstrommotor stufenlos regelbar über Frequenzumrichter Mögliche Optionen gegen Aufpreis: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Sinuslineal -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Kedpod Ih D Ejfx Adqodr Inklusive: -Bedienwerkzeug -Spannrohr für Futter Natürlich erhalten Sie auf unsere generalüberhalten Maschinen 12 Monate Gewährleistung. (Nur Anrainerstaaten) weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln

Condition: used, Year of construction: 2003, Technical details: grinding length: 1500 mm centre height: 325 mm weight of the machine ca.: 12 t Karstens EMAG H310 Universal Grinding Machine Kedpex Hgiljfx Adqedr Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Reinforced workpiece spindle, load capacity up to 250 kg Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Siemens 840D control system *

Condition: used, Year of construction: 2001, functionality: fully functional, Control system: Siemens Sinumerik 840D Includes: Grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine. Technical data: Center distance: 600 mm, Center height: 180 mm Maximum grinding diameter: 355 mm Maximum workpiece weight: 150 kg Maximum Z-axis speed: 11 m/min Minimum Z-axis speed: 0.01 m/min Maximum X-axis speed: 7.5 m/min Minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Kdodpfezh Uvtjx Adqsr Workpiece spindle: Taper bore of workpiece spindle: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, Lubricating oil: 30 liters, Hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, workpiece weight (max.): 25 kg, grinding length: 320 mm, grinding diameter: 160 mm, year of last overhaul: 2025, TOS BU 16 cylindrical and bore grinder, refurbished and under warranty. Workpiece diameter: 160 mm Maximum distance between centers: 320 mm Maximum weight of workpiece in centers: 25 kg Detailed offer available upon request. Kdodpfszcwg Ssx Adqor

Condition: used, functionality: fully functional, For sale is a high-precision universal and tool grinding machine, Strausak AG, Type 57U. Thanks to its versatile design with a cross table, it is ideal for tool, mold, and gauge manufacturing. It handles demanding grinding tasks on highly hardened workpieces (even in the range of 60–65 HRC) with absolute reliability. The spindle speed can be flexibly adjusted, and the maximum longitudinal travel of the X-axis is 600 mm with a center distance of 780 mm. The machine is in good condition. Machine Type 57U Manufacturing No. (Serial Number) 10686 Order No. 44137 Voltage (Volts) 380 V Frequency (Hz) 50 Hz Technical Feature Specification Max. Table Stroke / Longitudinal Travel (X-axis) 600 mm Center Distance (Workpiece Length max.) 780 mm Center Height 125 mm – 175 mm (depending on height blocks) Max. Grinding Diameter approx. 348 mm Table Dimensions 1,030 mm x 214 mm Table Swivel Range ± 9° Machine Weight (Net) approx. 2,500 kg (Shipping Weight approx. 2,700–2,800 kg) Net Machine Dimensions (L x W x H) approx. 2.30 m x 1.50 m x 1.50 m Recommended Space Requirement (Installation) at least 3.50 m x 2.50 m Spindle Speeds Continuously variable / Belt stages from 2,250 to 6,000 rpm Table Feed Continuously adjustable from 0 to 16 mm/min Kdodpfx Adov E Ivfoqjr Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2003, functionality: fully functional, Control system: Siemens Sinumerik 840D Includes: Grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine. Kdodpfx Adszh Ux Isqer Technical data: Center distance: 600 mm, Center height: 180 mm Maximum grinding diameter: 355 mm Maximum workpiece weight: 150 kg Maximum Z-axis speed: 11 m/min Minimum Z-axis speed: 0.01 m/min Maximum X-axis speed: 7.5 m/min Minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, Lubricating oil: 30 liters, Hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system includes: grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine Technical data: Center distance: 600 mm, center height: 180 mm maximum grinding diameter: 355 mm maximum workpiece weight: 150 kg maximum Z-axis speed: 11 m/min minimum Z-axis speed: 0.01 m/min maximum X-axis speed: 7.5 m/min minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle stock: MK 5 Ksdpfx Adozh Uvaoqedr Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 1974, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Kdjdpfjy Ty Rpsx Adqer

Condition: used, Year of construction: 1999, functionality: limited functionality, CNC Cylindrical Grinding Machine for Sale – STUDER S40 (1999) We offer for sale a STUDER S40 cylindrical grinding machine, year of manufacture 1999. The machine is in working condition. It is equipped with one grinding spindle and a turret wheelhead suitable for both external and internal grinding operations, making it a versatile solution for precision machining. Kdsdpfxey Elz Ds Adqsr Control system: FANUC 16 Key Features: External and internal grinding capability Turret wheelhead Reliable FANUC 16 control system Solid and proven STUDER build quality Operator manual. Delivery Terms: EXW (Ex Works) The machine is available for inspection upon request. For more information, photos, or pricing, please get in touch.