Used Jakü Pm-0-I-100 for sale (112,289)

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Installation Internal Number: #499 Rockstroh Drain Jet 100-2 * PTO from the Sprinter * Pratissoli KF32 high-pressure pump * approx. 120 liters/minute at 180 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000 liter water tank * Low water cut-off protection * Electric filling equipment and overflow protection * Electronic speed regulation * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with non-slip surface * Basic set of cleaning nozzles Special equipment: 2nd battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, 1-pole battery isolator switch, driver assistance system: traffic sign recognition, tachograph control in front under headliner, chassis: stabilization level III, all-weather floor mats, vehicle without tie-down points, transmission lock for PTO, front cup holders, A-pillar grab handles, additional main key, rear door (opening angle 270 degrees), hinged lid for storage compartment, terminal strip for electrical connections (driver’s seat console), comfort lighting in passenger/load compartment, dash load package (USB ports and additional 12V socket), wiring duct at rear portal, wiring duct at side wall, navigation system for MBUX multimedia, fog lights with cornering light, PTO 2B with intermediate shaft, parameterizable special module, cross member for trailer hitch, cross member with integrated step, sliding door left side load/passenger compartment, rear mud flaps, driver’s cab seats: comfort driver’s seat, sensor for auxiliary heater tank, additional battery separation relay, reinforced front axle, provision for transmission oil cooler, provision for load area partition, winter package, soft-close sliding door left, soft-close sliding door right Crsdpfjxc Syrex Ahbsc Further equipment: 3rd brake light, overhead storage above windshield, storage compartment below dashboard passenger side, adaptive brake light, passenger airbag, driver airbag, acoustics package, hill start assist, trailer coupling: electrics for trailer socket, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors (both), exterior mirror with blind spot assist, outside temperature display, DAB tuner (digital radio), ceiling light in cargo space with door contact, automatic driving light control, entry grip on right rear pillar, entry handle for sliding door at load area partition, driver assistance system: turn assist, driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: start info assist, driver assistance system: attention assist (fatigue detection sensor), driver assistance system: intelligent speed assist, driver assistance system: breakdown management, driver assistance system: crosswind assist, digital tachograph, 250 A alternator, speed limiter system 90 km/h, body/superstructure: standard high roof van, instrument cluster with color display, communication module (LTE) for digital...

Condition: good (used), Year of construction: 2007, Ref. no.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Cjdpjzabkvefx Ahbsrc Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: used, - Model: IFA/100 - Flour capacity: 65 kg - Dough capacity (mix): 100 kg - Bowl volume: 145 litres - Power: 5.7 kW - Dimensions (W x D x H): 75 x 120 x 152 cm - Weight: 480 kg - Frame: heavy-duty steel, mounted on wheels - Motors: 2 double-speed motors (one for the spiral, one for the bowl) - Bowl, spiral, central column, and safety guard: stainless steel The pre-owned IFA 100 fixed-bowl spiral mixer is a professional-grade machine designed for craft bakers and pastry chefs who demand performance, durability, and cost-efficiency. Manufactured by ALDEGHERI FORNI, this mixer is renowned for its Italian build quality and long-term reliability. Crjdpfx Ahjw Duriebjc Tjy Tew Duriodxugeb With a 65 kg flour capacity and a maximum dough output of 100 kg, it is ideally suited for medium to large-scale production. The 145-litre stainless steel bowl, along with the spiral and guard, ensures optimal hygiene and easy cleaning. The IFA 100 spiral mixer features a heavy-gauge steel frame mounted on wheels, providing both stability during operation and ease of movement when required. Its two double-speed motors enable efficient and versatile kneading, adaptable to various dough consistencies. The integrated low-voltage (24V) electric control with timers allows precise and safe operation, whether in manual, semi-automatic, or fully automatic modes.

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Crsdpfx Ahoym Ih Uebjc

Condition: used, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 350 mm, A1 GW2640818, * Unique, torsionally rigid aluminium chassis for safe driving characteristics Codpfx Aoym Ihhohborc * 4 recessed, foldable lashing eyes mounted in the side wall for secure load securing * Side walls made of anodised aluminium hollow profiles, rear foldable, with recessed latches * Folding front wall * Loading height 550 mm Errors and prior sale reserved

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Retraction force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet Crsdpfx Aoxd Tv Dohbsc ===== Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Condition: used, Year of construction: 1998, For sale is a used spotting press from manufacturer Reis, featuring an adjustable pressing force of up to 100 tons. This 4-column press offers a table size of 1600 × 1300 mm, a maximum open height of 950 mm, and is equipped with an ejector in the table, making it particularly suitable for spotting, adjustment, and toolmaking work in mold and die construction. ##### Cjdpfx Ahoxd Tiqjborc Technical Data & Information: Spotting Press – REIS TUS 80-100 #### General Specifications - Designation: Spotting Press - Manufacturer: REIS - Type: TUS 80-100 - Design: 4-column press - Year of manufacture: 1998 - Pressing force: 26–100 tons (adjustable) - Maximum return force: 45 tons - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Max. open height: 950 mm - Overall dimensions (W x D x H): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm #### Hydraulic System - Hydraulic pump: Rexroth SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Max. operating pressure: 200 bar - Pressure accuracy: ±5 bar - Tank oil volume: 215 L - Hydraulic oil: HLP 36 #### Features / Equipment - 180° tiltable ram plate (up to 3 t) - Table ejector (3.5 t / 130 mm) - Oil coupling sockets for core pullers - Digital measuring system - Material feed through ram plate possible (injection molding) - Speed increase #### Control System - Operator panel - Control system: Siemens / Pilz - Functions: - Ram up / down - Tilt ram plate - Extend table - Operate ejector - Adjust pressing force - Control core pull / oil couplings #### Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 7.5 kW - Total connected load: approx. 10 kW (spotting press, tryout press, tool adjustment press, toolmaking press, 4-column press, hydraulic press, REIS press, toolmaking spotting press)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, pressure: 1 bar, 1 used low-pressure steam boiler ----- Manufacturer: VIESSMANN Model: Vitoplex 100-LS Output: 580 kW Steam output approx.: 800 kg/h Water content approx.: 1,316 l Crsdpjw I T E Iefx Ahbec Permissible operating overpressure: 1 bar Year of manufacture: 2001 CE marking: 0035 Equipped with Weishaupt gas burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC main spindle drive SN:230902-761859-015, used, normal signs of use, 100% functional, delivery as per photos. Crjdpfxsx Etxdj Ahboc

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Credpfxsvvi Sco Ahboc

Condition: used, Year of construction: 2023, controller manufacturer: Mazak, controller model: Mazatrol SmoothAi, _____ Description: Year of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mm Turning length : 850 mm In General: Year of manufacture:2023 Control system:Mazak Mazatrol SmoothAi Max. machining diameter:600 mm Max. machining length:850 mm Main spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Csdoyrvzmopfx Ahbjrc Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Chuck:3-jaw chuck Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Tailstock function:Yes Tool carrier (X/Y/ZB): Technology:Travelling column with milling spindle X-axis:535 mm Y-axis:210 mm Z-axis:900 mm B-axis:-30° / +210° Milling spindle speed:20,000 rpm Power:24 kW Tool taper: HSK 63 Tool magazin: Technology:Shelf magazine Number of stations:250 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 15 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:Renishaw tool setter Bar loader:IRCO ILS-MUK 7012 Finished part removal:Parts catcher Software option I:5-axis simultaneous machining Software option II:Synchronous thread cutting Software option III:Cylinder interpolation Software option IV:Tool radius compensation Software option V:Tool length compensation Emulsion mist separator:Mechanical Setup mode:Electronical handwheel

Condition: used, maximum load weight: 2,641 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2025, Year of construction: 2025, Henra MT 353517 Machinery Transporter for construction equipment, etc. – new New, immediately available from stock. Permissible gross weight 3500kg. Transport area 3500 x 1700mm. Standard features include: * Bolted tubular drawbar with 2 different heights for overrun brake installation * Recessed lashing hooks in V-grooves in the loading area * Very low loading floor for easy driving on and off * 115 cm long loading ramp with sturdy drive-on aid and adjustable spring system * Loading ramp equipped with a robust and practical rotary latch (prevents tailgate rattling) * Heavy-duty bucket holder, also serves as a spare wheel bracket * Integrated LED side marker lights in side rail * LED front lights and LED contour lights * Sealed front section with tubular frame Crodpfxszamtvs Ahbsc * Heavy-duty 18 mm plywood/wooden floor with anti-slip surface * Wheels 185/60R12 * Approved for 100 km/h * Despite the utmost care, errors in this listing cannot be excluded. We reserve the right of prior sale and to make changes!

Condition: used, mileage: 217,170 km, power: 130 kW (176.75 HP), first registration: 02/2010, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 06/2028, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Internal vehicle no.: G300103 German vehicle On our lot in Kaufungen - Kassel, immediately available More INFO at: * Luis Lucena (German, English, Spanish, French) *Viktoria Sologubova (Polish, Russian, Ukrainian, English) VIDEO: Sewer cleaner with 2,875 operating hours Rockstroh Dran Jet 100 Year of construction 2010 Pump performance 91l/min - 150 bar 115l/min - 120bar 128l/min - 160 bar* 120l/min - 180 bar* 106 l/min - 200 bar* 92 l/min - 210 bar* *only for vans Credpfxov Rt T Ho Ahbsc High-pressure system half-side positioned high-pressure unit safety, overflow, and pressure control valve, 1.5" water filter Pump drive PTO vehicle drive (van) hydraulic (van or box body) Hose reels 1 x 80/100/120m DN10/13 1 x 80m DN16/19 1 x 40m water filling reel 3/4" Financing example: * Internal number: G300103 * Purchase price: 29,900.00 € * Down payment: 10% * Term: 60 months * Monthly payment: 468.31 € Residual value: 5,980.00 € If you like this offer or want to adapt it to your needs, contact us (Mr. Enchev). We look forward to your call Errors excepted We are happy to accept your used vehicle as trade-in. Financing directly with us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: good (used), Year of construction: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Additional information & extras Core pull: 1 pcs Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts Csdpey Ub D Tjfx Ahborc * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18621 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight: 103 g Injection pressure: 1600 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability. The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs. Cedpfjy Ub D Hox Ahberc The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Extremely low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision plastic parts * Suitable for high-speed serial production The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency. The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.

Condition: good (used), Year of construction: 2008, Ref. no.: 18619 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 All Electric Year of construction: 2008 Clamping unit Clamping force: 100 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight: 76 g Injection pressure: 2180 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 5500 kg Further information: Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden. Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität. Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten. Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen. Die wichtigsten Vorteile der IntElect Serie: * Vollelektrische Direct-Drive Servo-Technologie * Sehr geringer Energieverbrauch * Hohe Präzision und Prozesswiederholgenauigkeit * Geräuscharmer und vibrationsarmer Betrieb Codpfey Ub Dtjx Ahbsrc * Hohe dynamische Servo-Performance * Geringer Wartungsaufwand * Saubere Produktionsumgebung * Ideale Lösung für technische und Präzisionsteile * Geeignet für schnelle Serienproduktionen Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Crjdpfxehbal Dj Ahbsc Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: excellent (used), 3-axis visualization Universal spatial head milling machine, “HURON” type, 360° orientation 3-axis visualization Vertical spindle power: 2.2 kW X-axis travel: 600 mm manual / 480 mm automatic Y-axis travel: 270 mm manual Z-axis travel: 380 mm manual / 340 mm automatic Crsdpfx Aswlgguohbec Feed rate: 24 – 402 mm/min Number of spindle speeds: 11 Spindle speed: 45 – 1600 rpm Dimensions: 1540 x 1355 x 1650 mm Weight: 1500 kg

Condition: excellent (used), Year of construction: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force in the X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table dimensions: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in the spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Codsxdwkfopfx Ahbjrc Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be provided by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Condition: used, Year of construction: 1997, Press Brake HACO type PPM 36100 Command: ATL 550 Capacity: 3150 mm x 100 T Electric Back gear gauge travel: 800 mm Slide travel: 120 mm Year of construction: 1997 Throat depth: 250 mm Distance between uprights: 3150 mm Working Length: 3600 mm Motor power: 5,5 kW Voltage: 380 V Crodpfxjzaqq Ss Ahboc Dimensions (L x W x H): 3900 x 1600 x 2300 mm Weight: approx 8 T

Condition: reconditioned (used), Year of construction: 2009, MAZAK QUICK TURN NEXUS 100-II MSY Cedpsy S A Risfx Ahborc Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - CNC control: Mazatrol Matrix - SMW collet chuck 173E for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - C-axis counter-spindle, input accuracy 0.0001 - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: new, Year of construction: 2025, machine/vehicle number: 23GS101972, fuel type: diesel, motor manufacturer: Kubota D1105-EF02, General information Field of application: Construction Weights Empty weight: 450 kg Functional Generator capacity: 15 kVA Dimensions of cargo space: 163 x 77 x 107 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 38 l Production country: IT Csdpfxjrulz Ee Ahbsrc Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, Year of construction: 2022, Please note that the images are archive images! The vehicle may be in use. Additional information: Chassis: Central axle semi-trailer, low-bed Fine-grained steel welded construction, geared support leg at the front, telescoping rear support, chocks with holder, mudguards made of sheet steel over both wheels Credpfxjqmc Ras Ahbjc Coupling device: Central axle semi-trailer Drawbar with tested 40 mm drawbar eye, drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearings and S-cam brakes, axle/chassis laser-aligned, reducing tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking system 2-line compressed air braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin connector at the front, with connecting cable Platform TTS low-lying steel trough, platform floor made of steel/checkered plate, steel walls welded solidly to the floor, platform length 5500 mm, trough with Load-Lock profile at the front and on the sides for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight unevenness in the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel trough and 1 x at the rear in the floor, each 5 tons. Additional pair of lashing eyes in the floor, each 5 tons Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with handrail on the ramps, covered with wood, with gas spring for single-person operation Operating instructions The stated total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Registration country/signs Registration country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Please note that the images are archive images! The vehicle may be in use.

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Crjdjy N R N Ujpfx Ahbjc Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: excellent (used), mileage: 1,275,885 km, power: 279 kW (379.33 HP), first registration: 07/2004, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: other, total length: 10,300 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, electric window regulation, parking heater, spoiler, = Additional options and accessories = - Aluminum fuel tank Cjdpfx Asy Rz Epshberc - Brake booster - Roof spoiler - Air-suspended seats - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater = Notes = TRANSPORT TO ANTWERP 590 EURO = Further information = Axle configuration Tire size: 315/80 R22.5 Front axle 1: Steered; Suspension: Parabolic spring Front axle 2: Steered; Suspension: Parabolic spring Rear axle 1: Twin tires; Suspension: Leaf spring Rear axle 2: Twin tires; Suspension: Leaf spring Weights Unladen weight: 13,980 kg Payload: 22,020 kg Gross vehicle weight: 36,000 kg Condition Technical condition: very good Optical condition: very good Identification Reference number: 17