Used Iberdrill Az 34 for sale (3,876)

Condition: used, Twin screw extruder 34mm diameter 400 volts, 128 amps 2 pairs of spare screws Kjdev U Nnuspfx Ablslt Used for powder coatings Hourly output 250-400 kg depending on the product

Condition: excellent (used), color: white, lifting height: 34,000 mm, first registration: 08/2013, mast type: telescopic, Year of construction: 2013, Drive: Wheel Unladen weight: 3,350 kg Payload: 150 kg Gross weight: 3,500 kg Lifting capacity: 4,000 kg Body manufacturer: BOCKER AHK 34/1800 ASSEMBLY CRANE/CRANE/GRUA/CRANE CE marking: yes Technical condition: very good Optical condition: very good Klsdpfxsyiulxe Ablet BOCKER AHK34/1800 ASSEMBLY CRANE ALUMINIUM TRAILER, RADIO REMOTE CONTROL ALUMINIUM ASSEMBLY CRANE WORKING HEIGHT: 34 METRES MAX. LIFT: 1,800 KG GERMAN DOCUMENTS THE TRAILER IS IN VERY GOOD CONDITION

Condition: used, Year of construction: 2007, We offer this used Wintersteiger 34 070 SW-550 H T machine, year of manufacture 2007. Type: 34 070 SW-550 H T Model: Micro Grinder H T Voltage: 400-415 V 3 AC Power: 1.1 kW Power: 1.47 HP Frequency: 50 Hz Rated current: 3.3 A Weight: 220 kg Weight: 485 lbs Year of manufacture: 2007 Klodpfx Aey Dip Neblet If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 50.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm threading 24 in ST M threading 30 in GG M turning speeds 100 - 1.800 U/min feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm total power requirement 0.6 / 1.8 kW weight 470 kg height of the machine 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch Ksdpfx Abexaa R Hjlelt - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 0,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 760 x 600 x 2000 mm Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table Kedpfx Absvzhd Ujlelt - CE marking

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). Kjdpfxjxab Nke Abljlt - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: used, maximum load weight: 15,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2013, Year of construction: 2013, Equipment: ABS, * NET PRICE * Lafette 7.82 * BPW axles with disc brakes * Spare wheel with holder * Underrun protection * Tyres: 385/65 R22.5 * Unladen weight: 2,850 kg * German vehicle WhatsApp: Errors and intermediate sale reserved!! Sale takes place with exclusion of any warranties!! - We speak Russian - We speak English - We speak Polish - We speak Spanish Kjdpfsyl Dy Dex Ablslt

Condition: ready for operation (used), Year of construction: 1993, A multi-station transfer machine Riello with drilling and tapping units is available. Horizontal working units: 2x drilling units, 2x tapping units, 1x combined unit. Radial working units: 1x drilling unit, 1x tapping unit, 1x combined unit. Quill stroke: 100mm, spindle holder: SK40, rotary table type: TG 320, turret stations: 5, chuck diameter: 200mm, jaw opening travel: 12mm+12mm, spindle holder-chuck center distance: 225mm, total connected load: 23kW. Machine dimensions X/Y/Z: approx. 3700mm/3400mm/3050mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Klsdpfoytgpwsx Abljt

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: rotating jaw set for four-jaw chucks, soft -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 140/140/H100 mm -Total weight: 8.8 kg Kodpfx Absq Rhaiololt

Condition: good (used), flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: Nord, flat gear motor -Type: SK 3282A-100 L/4 i= 42.02 -Speed: 34 rpm -Engine: Type SK 100 L/4 -Power: 2.2 kW / 1440 rpm -Hollow shaft: Ø 40 x 175 mm -Protection class: IP55 -Dimensions: 470/290/H380 mm -Weight: 62 kg Kodpfst E D Sfjx Ablslt

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: rotating jaw set base jaws for four-jaw chucks -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available Klodpjrub H Eofx Ablst -Price: per set -Total dimensions: 130/135/H43 mm -Total weight: 4.1 kg / 4.8 kg

Condition: good (used), Safety relay, relay, contactor, semiconductor contactor, contactor -Type: SSP 34 Kledpfxob A S Nas Ablst -Re1: 220 V 50 AC -Re2: 220 V 50 AC -500W max. 380V max. 6A max. Quantity: 1 piece available -Weight: 0.7 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Bauer, gear motor type BG20-37/DV08MA4-TOF/MG -Speed: 34 rpm -Power: 0.37kw -Type: B5 -Shaft: Ø 25 x 50 mm Ksdpfsii E Upex Ablslt -Recess: 110 mm -Lock circle: Ø 130 mm -Protection class: IP 65 -Dimensions: 485/160/H215 mm -Weight: 24kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 130/100/H80 mm -Total weight: 5.4 kg Kjdpfjrhmmnsx Ablolt

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Kjdpfsu Npfgsx Ablelt -Top jaws: 4-piece rotary jaw set, 3 sets -Jaw width: 34 mm -Dimensions: see photo technical drawing -Price/Sale: only complete -Total dimensions: 410/130/H80 mm -Total weight: 21.3 kg

Condition: good (used), Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling Kodpfxjdfi Dae Ablslt -Manufacturer: Stromag-Periflex -Type: PS 34-2 -V.-No.: 467/1 -Ident No.: 699070500 -Outer diameter: 337 mm -Inside diameter: 103 mm -Pitch circle outside: 315 mm -Hole circle inside: 138 mm -Number: 6x clutch discs available -Price: per piece -Dimensions: 337/337/H41 mm -Weight: 2.5 kg

Condition: used, Spiral spring, steel spring, compression spring, round wire spring -Spiral spring: steel spring -Diameter: Ø 189 mm -Length: 505mm -Wire thickness: 34 mm Kedpsk Nfnujfx Ablolt -Number: 10x springs available -Price per piece -Weight: 37 kg/pcs

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Ksdpfx Aow Dp Thsblslt -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Dimensions total: 130/136/H80 mm -Total weight: 7.3 kg

Condition: good (used), Flange connection, V-flange, pipe coupling, weld reducer, reducer, clasp bottom, weld reducers -Weld reducers/clapper bases: 108 pieces -Type: 34 different versions, see photos / parts list Ksdpfx Abeq N E N Njlslt -Price/Sale: complete -Stock: other sizes/types also available, please inquire. -Transport dimensions: 1200/800/H200 mm -Weight: 148 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft Klodpfor R Abtex Ablet -Jaw width: 34 mm -Dimensions: see photo technical drawing -Total dimensions: 135/105/H80 mm -Total weight: 6.6 kg

Condition: good (used), friction wheel, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling -Coupling star: for crane chassis .: 1031 4149 Kjdpfsv Hw Adex Ablolt -Type: Part 20 f. SDDL-5-200 -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 194 x 34 mm -Weight: 0.5 kg/piece

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard Ksdpfsq Tvpmsx Ablslt -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 131/102/H80 mm -Total weight: 5,4 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Kedjhhfzzopfx Abljlt -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 34 mm -Overall dimensions: 130/100/H80 mm -Total weight: 5.5 kg

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope Kedpjb A S Izjfx Abljlt -Wire rope: Ø 15 mm -Length: approx. 34 m -for electric cable winch -other crane ropes are also available -Weight: 36 kg

Condition: excellent (used), Metal band saw blade, band saw blade -unused: original packaging -Number: 6x sheets available Kedpfx Abob A Inwoljlt -Price: per piece -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm