Used Homag Edge Processing Line Homag Kfl610/21/Pu/L/25/Si14 (2011) for sale (89,352)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms Guodpfx Agstzmifj Tsh -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: good (used), functionality: fully functional, Raimondi BI-Bulldog Edge Processing Machine For sale: a Raimondi BI-Bulldog in excellent condition. The machine has been used very little and is accordingly well-maintained. Gjdpfx Ajzzru Tjg Tsuh 2 processing units / motors For tiles and natural stone Edge, bevel, and bullnose/45° processing Very good, well-maintained condition Inspection and test run possible by arrangement.

Condition: used, first registration: 04/2006, Year of construction: 2006, KRONE 7.3 LS4 - CS Tarp/Curtain-sided - / Tautliner demountable body with Edscha convertible top !!! 25 units in stock !!! ● Side sliding tarps ● EDSCHA convertible top ● Portal doors at the rear ● 4-point torsion bar locking system ● Wooden floor ● Recessed rails on the right and left sides for securing the load ● Internal / loading dimensions: 7,350 x 2,500 x 2,530 mm (L x W x H) Gjdozcaccjpfx Ag Touh !!ALMOST NO RUST!! - Good condition for its age! - Subject to errors and prior sale!

Condition: used, Coil Handler and Straightening Machine EBU Strip Processing Line Straightening Machine EBU, Type RE 7.50-320 Year of Manufacture 2004 Strip Nominal Width 320 mm Strip Width max. 320 mm Strip Thickness max. 3 mm Strip Cross-Section max. 1000 mm2 Power Supply 400 Volts, 50 Hz Unwinding Coil Handler EBU, Type BSH 3/320 Manufacturer 10838, Year of Manufacture 2004 Coil Weight max. 2500 kg Coil Width 320 mm Power Supply 400 Volts, 50 Hz Gusdpfx Aez Ek Sceg Teh - Central expansion - Drive via geared brake motor - 3 starting arms

Condition: used, functionality: fully functional, FOREL Gsdsy If Ayspfx Ag Tjuh Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ total power requirement: - kw Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min Gjdpoyt I Axjfx Ag Tjuh frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency · Efficient filter cleaning thanks to flow-optimized filter head · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane *

Condition: good (used), functionality: fully functional, AMF Bakery Tromp puff pastry line direct from major factory. Has been producing 2 tonnes per hour of 90-100 layer puff pastry. Other machinery available from the same line including 2 x Syspal bowl tippers (2024), 2 x Diosna WV240 A Premium wendel mixers (stainless steel model), 2 x Siloba 75 tonne flour silos, 2 x Siloba flour stations. All being removed at the end of August '26. Gedpezumifefx Ag Tsuh

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro Guodpfslikydjx Ag Tjh EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Gusdpfxolwtzyo Ag Toh Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Gsdpozuynhsfx Ag Teuh Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, Overview  Gsdpfx Asv E Haijg Tsuh This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  - Filtration system | GYM Internacional | 8000 | 2011 - Manufacturer: GYM Internacional - Model: 8000 - Year of manufacture: 2011 - Capacity: 8,000 L/h - Power consumption: 4 kW - Dimensions: 2,500 x 1,500 x 100 mm - Weight: 1,110 kg - Bacteriological filtration through housing system - Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 - Bottle formats: 1.5L & 5L PET - Output: - 1,600 bottles/hour (1.5L) - 700 bottles/hour (5L) - Filling heads: 9 - Capping heads: 1 (screw cap) - Bottle diameter: Min. 120 mm, max. 300 mm - Bottle height: 250-400 mm - Direction of rotation: clockwise - Power consumption: 3.5 kW - Dimensions: 4,000 x 3,000 x 3,500 mm - Weight: 2,500 kg - Rotary labeling machine | NEWTEC | LEOPARD HM 720 F6 S1E1 | 2011 - Output: 3,000 bottles/hour - Dimensions: 2,750 x 1,700 x 1,780 mm - Weight: 3,500 kg - Pallet wrapper (semi-automatic) | ECOPLAT | ECOPLAT BASE | 2011 - Capacity: 35 pallets/hour - Type: Turntable - Control system: PLC - Max. Pallet weight: 2,000 kg - Semi-automatic - Dimensions: 2,439 x 1,500 x 2,580 mm - Weight: 1,200 kg  

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 2,126 h, load capacity: 2,500 kg, lifting height: 3,450 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,350 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostatic/dual pedal Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: New Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: New Guedpez Sfrtofx Ag Toh Description: Handover with new maintenance & new FEM 4.004 inspection incl. inspection certificate. Like-new condition / incl. all original documents / operating manual / parts list / purchase invoice etc. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Feel free to browse our website at fleischmann-foerdertechnik. We will gladly provide you with a quote for leasing & financing as well as delivery under favorable conditions. Trade-in of Linde equipment is also possible – even without purchasing equipment from us. The stated operating hours were recorded at the time of the listing date. Subject to prior sale, changes and errors. Side shifter, integrated side shifter 3rd valve, work light rear, work light front, roof protection, windshield

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Himmel, milling motor from Okoma table router -Type: 2 LS 80 -Power: 1.5/2.2 kW 11770/17790 rpm -Voltage: 110/165 V/200/300 Hz -Dimensions: 460/240/H150 mm -Weight: 25 kg Gujdegfcm Ujpfx Ag Toh

Condition: used, mileage: 131,400 km, power: 315 kW (428.28 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), * Special equipment: * Total tank volume 9770L, diameter 1600 mm * Hydraulically fully opening bottom flap with hydraulically actuated central locking * Separation chamber 500l * Extension piston with variable chamber division * Position 1: Water chamber 2390/Sludge 6880L * Position 2: Water chamber 4360/Sludge 4910L * Large flushing hose reel, hydraulically swiveling, with storage for suction hose for 160 m HD hose DN25 with automatic hose guide * Suction hose storage, double telescopic * Small flushing hose reel with hydraulic drive for 80 m flushing hose DN13 with automatic hose guide * With separate pressure regulating valve for operation with spray gun * Cassette deck for storing the suction hose DN125 * HD pump Uraca KD718 G60 with 648 l/h * Vacuum pump Kaiser VPC 60 with 1625 l/h * Total operating hours of the vehicle: 8118 h * Hand washbasin * Cable winch, hydraulically operated, mounted on swiveling reel * Control panel on the right at the rear of the vehicle * Control panel on the swiveling reel * Operation also possible via radio remote control * Vehicle with radio remote control * Axle load, front axle: 8.0 t * Trailer socket 12V / 13-pin * Audio system: CD radio (Bluetooth) * Exhaust pipe extended behind the cab * Battery 220 Ah Gujdpfx Ajzz Tz Ieg Toh * Compressed air connection in the cab * Compressed air tank, aluminum * Electrical pre-wiring in the cab 24V / 100 A * Cab: steel-sprung, comfort * Suspension: front springs 8.0 t, 2 leaves * Transmission: 12-speed - Type: G 330-12 * Rear axle: differential gear 300 * Communication interface * Fenders, 3-piece * Engine compartment encapsulation, reinforced * Tag axle, steered, liftable * Auxiliary drive MB 123-10c * Parameterizable special module * Reversing warning, acoustic (warning signal externally) * Rear cross member, reinforced * Circuit breaker * Seats in the cab: driver's seat, sprung comfort seat * Sun visor, exterior * Sunblind, side window, driver's door * 12V socket in the front passenger footwell * 24V / 25 A socket in the front passenger footwell * Rotating beacon * Two-plate clutch * Oil cooler, transmission Additional equipment: * Emission standard EURO 6 * Axle configuration: 6x2 * Trailer brake, 2-line * Connections on the left, trailer socket 24V / 15-pin * Antos * Exterior mirrors, electrically adjustable and heated * Differential lock, rear axle * ClassicSpace * Stowage flap, exterior left * Cab floor with engine tunnel 320 mm * Cab: mounting height 420 mm * Suspension: leaf / air * Window lifts, electric * Windshield, tinted * Generator 100 A * Transmission: 12-speed - Type: G 211-12 * Urea tank (AdBlue): 60 liters * Lift roof, manual (steel) * Info display 10.4 cm * Comfort locking system * Fuel tank: 290 liters, aluminum * Air intake from the front * Air compressor, 2-stage * Engine 10.7 L - 315 kW R6 Diesel (OM 470) * Tag axle, single-tired * Ramp mirrors * Waste heat utilization * Disc brakes, front and rear axle * Errors, changes and prior sale reserved.

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Guodpoz Ri N Eofx Ag Teh Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Condition: Used line Video: Machines and Equipment 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute 2. Air conveyor – Lanfranchi, year 2006 3. Chiller – MTA, year 2026 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.6 kW 17350 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 16 mm L 10 mm -Number: 4x motors available -Price: per piece -Dimensions: 280/60/H140 mm Guedpfxjb A Nxvj Ag Tsh -Weight: 4 kg

Condition: excellent (used), Year of construction: 2019, Speck Anlagentechnik Speck pumping station, SPH-R-055-2 DR control system including 2 IN-VB 25-30F 11-E 3A5-055 centrifugal pumps and 2 RTG actuators + Frame and 2 2-inch stainless steel manifolds (supply/return) Gjdpfx Aewi Icxog Teuh + 3000L tank (2 chambers) + Complete 2-inch stainless steel piping + All sensors and actuators/valves/sensors + Optional: approximately 250m of 2-inch hose including quick-release couplings and shut-off valves Pumps were dismantled in working order. Dismantled and packed on several pallets. Systems new price: €85,000. Item location: 75053 Gondelsheim. Used condition, see pictures. Shipping via freight forwarder or pickup by appointment.

Year of construction: 2011, condition: ready for operation (used), A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible. Gedpsznx Ndjfx Ag Tsuh

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm Gsdow H Rzxjpfx Ag Tsuh – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: used, Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz Guedob Uhrzspfx Ag Tjh -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides -Motors: swiveling -Mill: with inserts -Dimensions: 900/1100/H1000 mm -Weight 274 kg

Condition: excellent (used), Year of construction: 2012, Inline cooking line for pasteurizing processed cheese, heating from the initial mixing temperature to approximately 85°C for filling or further processing. The line consists of: Buffer Tank The buffer tank is used for the temporary storage of processed cheese prior to further processing or filling. The product is maintained at approximately 15°C to preserve quality and ensure optimal viscosity. This stabilizes the process flow, balances fluctuations in upstream and downstream operations, and helps maintain consistent product properties. Volume: 400 kg Model: Zufühfbehälter 400 Type: 670 Machine No.: 14616 Installed power: 22 kW (46A) Year of manufacture: 2012 The buffer tank is equipped with: - Tank with 2 feed augers, CIP cleanable. - Stainless steel covers - Load cells for weight indication on the buffer - Outfeed pump - CIP return pump (Fristam model: FPE3532/155, 7.5 kW) Gsdpjzxc Dmefx Ag Touh Inline Cooker The inline cooker is used to continuously heat and process the cheese mixture from approximately 15°C to 85°C. During this step, the product is thermally treated and homogenized by a high-shear mixer to ensure optimal mixing of steam into the product and to achieve the desired structure and consistency. This ensures efficient processing, uniform product quality, and a stable flow for downstream operations. Heating unit specifications Model: FL / Erhitzungseinheit Type: 261 Machine No.: 14217 Installed power: 17 kW (37A) Year of manufacture: 2012. The controls are excluded.

Year of construction: 2011, condition: excellent (used), For sale: a complete unit for processing green peas, combining a winnowing machine, a de-stoner, and a screening/washing machine in one. Capacity: approximately 10 tons/hour. Godpfx Agjzhv Nue Touh

Condition: new, Year of construction: 2026, Automatic Slitting & Cut To Length Line Coil Slitting and Cut To Length Production Line for Sheet Metal Processing The Automatic Slitting & Cut To Length Line is designed for longitudinal slitting and cross cutting of sheet metal coils into strips and flat sheets with programmable lengths. The production line combines several operations in one compact system: Coil feeding Slitting Precision leveling Servo length measuring Cut-to-length part Finished sheet conveying Automatic stacking The machine is suitable for processing galvanized steel, pre-painted steel and other coated sheet materials used in HVAC production, roofing, facade systems, roll forming and general sheet metal fabrication. Main Features Combined slitting and cut-to-length production Fully automatic operation Hydraulic cutting system Precision sheet leveling Servo-controlled length measurement PLC controlled production Touchscreen operator interface High production accuracy Compact machine layout Reliable industrial construction Material Processing Suitable materials include: Galvanized steel (GI) Pre-painted galvanized steel (PPGI) Coated sheet steel The slitting section is equipped with hardened tooling designed for accurate strip production. The slitting system provides accurate strip widths with stable cutting quality during continuous production. The production line is equipped with an automatic hydraulic cut-to-length system. Typical cutting tolerance: ±2.5 mm for sheet lengths up to 5000 mm ±3.0 mm for sheet lengths between 5000 and 10000 mm Drive System The roll forming and feeding system is powered by: Gsdpfx Aezrwhmjg Tjuh Main motor: 4 kW Hydraulic power unit: 3 kW Power transmission: Chain drive Industrial gearbox Heavy-duty mechanical transmission Control System Technical Specifications Parameter Specification Machine Type Automatic Slitting & Cut To Length Line Material GI / PPGI Maximum Coil Width 1000-1250 mm Material Thickness 0.25–0.1 mm Minimum Slitting Width 60 mm Heavy-duty 120 mm shaft diameter Maximum Number of Slitting Knives 5 Production Speed 10–15 m/min Main Motor 4 kW Hydraulic Power 3 kW Cutting Accuracy ±2.5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Cutting Type Hydraulic Cut To Length Transmission Chain Drive Machine Structure Wall Plate Frame + Column Cutting Structure Machine Dimensions Approx. 2500 × 1500 × 1400 mm Electrical Supply 380 V / 50 Hz / 3 Phase The production line is suitable for manufacturing: HVAC duct blanks Ventilation components Roofing sheets Wall cladding panels Roll forming blanks Sheet metal parts Laser cutting blanks Press blanks Electrical cabinet panels Industrial sheet products Advantages Slitting and cut-to-length in one production line Compact machine footprint High processing accuracy Low maintenance requirements Fast production changeover Automatic sheet stacking High productivity Reliable hydraulic cutting Precision leveling Suitable for continuous industrial production Standard Equipment Depending on customer requirements, the production line can be supplied with: Manual decoiler Hydraulic decoiler Double decoiler Coil loading car Protective film laminating unit Different slitting knife configurations Increased material thickness capacity Different coil widths 1.5 m conveyor table 3.0 m automatic stacking system

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KNS 21 05/2 with bracket -Power: 0.15/0.22 kW 11160/17250 rpm Guodpfevy Sryjx Ag Tsh -Voltage: 133/200V / 200/300 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Year of construction: 2001, condition: excellent (used), I sell the Stacking / Destacking device HOMAG BARGSTEDT TBH22/D/25/12, year 2001. Gjdpfx Asm Dqmasg Tjuh Stacking device one side feeding / also suitable for pallets. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 8 tacts / min Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.