Used Hawktech S.r.o. Hvac for sale (864)

Condition: used, Year of construction: 2006, functionality: fully functional, Baler press for bundles approx. 400 kg. Manufacturer: HSM Model: HL 3521 Year of production: 2006 Condition: good Machine has undergone major service. Oil pump replaced. Oil cylinders refurbished. After agreement, can be sold and shipped immediately. Nljdpfx Aasy A Hu Hjasa

Condition: good (used), Year of construction: 2015, clamping force: 2,200 kN, Equipment: documentation/manual, Controll : CC300 Clamping force: 220 t Injection unit Screw diameter: 40 mm (S8 Screw Geometrie G1, LD20) 30% GF Type: Horizontal Drive: Hydraulic Clamping unit Min mould height: 300 mm max opening : 758 mm Nsdpfxex H Awls Aaaela Equipment: Euromap 67 Mould heating controll 8 zones 2x Pneumatic valve 4x hydraulic valves 4x Core pullers Hours: ca 37000 Wittmann W818-4597 available Complete machine data on request.

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Nodpey Apdqofx Aaajla Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons Distance between tie bars: 475 x 475 mm 2 x core pullers on movable platten Nsdpjxd Sz Esfx Aaasla \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)

Condition: new, Year of construction: 2026, functionality: fully functional, Robotic CNC Workstation – SINUMERIK ONE We offer a robotic workstation equipped with an industrial robot featuring a reach of 3000 mm, controlled by the Siemens SINUMERIK ONE CNC system, suitable for a wide range of applications: • Grinding • Milling • Finishing • Large-format 3D printing • Machining The workstation can be expanded with: • Workpiece positioner • Linear robot track for increased working area We deliver turn-key solutions fully customized to customer specifications. Nlsdpfxjy D N Acs Aaaoa Robot tooling is always designed and quoted individually according to the specific application. Accuracy and Kinematics: We offer various configurations based on the required machining accuracy. Our solutions utilize MABI kinematics with direct measurement, enabling high precision even when machining materials such as steel. For less demanding applications, we offer a more cost-effective Comau kinematics option, suitable for machining wood and plastics. Safety Solutions: • Fencing with the Haberkorn system • Or fully enclosed workstation housing

Year of construction: 2026, condition: new, functionality: fully functional, Robotic Grinding and Polishing Cell – CNC Control SINUMERIK ONE We offer a modern robotic cell designed for precise and efficient grinding and polishing operations using CNC control. An ideal solution for production automation and achieving consistent, high-quality surface finishes. Key features: Industrial robot with a 3000 mm reach Fully enclosed safety cell Control system Siemens SINUMERIK ONE HT2 operator panel 22" touchscreen interface for intuitive operation Programming and control: Programming via NC code (standard CNC) Shopfloor programming: ShopTurn ShopMill Capability to program using standard CAD/CAM systems Intuitive program creation directly on the machine – no CAM required Processing technology: High-performance grinding spindle PushCorp Njdpfoy D Nwtjx Aaaela (power selectable based on application requirements) Optional extensions: Integration of a rotary table (positioner) إمكانية إضافة linear axis to extend the working envelope Option to integrate a machining spindle with automatic tool changer (ATC) Fully customizable based on customer-specific applications Benefits: High repeatability and consistent surface quality Combination of robotics and CNC control in one system Flexibility for grinding, polishing, and subsequent machining in a single setup Wide range of programming options (NC, shopfloor, CAD/CAM) Easy operation thanks to shopfloor programming Ready for Industry 4.0 integration

Condition: excellent (used), After repair in 2022. Swing mm 400 Distance between centres mm 1000 Nsdpeyzpycjfx Aaaola Grinding wheel: diameter x hole x width mm 500 x 80 x 203 Taper in spindle Morse 5 Max. workpiece weight between centres kg 300 Grinding spindle revolutions r.p.m. 1720, 1980 Cross motion of grinding spindle mm 415 Motor output kW 9,5 Total input kVA 16 Machine dimensions: length mm 4890 width mm 2320 Machine weight kg 5150

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, In 02/2026 new cooling threw spindle. Including 4th axe and probes. Table mm 914 x 356 Axes: (X) mm 762 Nlodpfoyzpwuex Aaaoa (Y) mm 406 (Z) mm 508 max. table loading kg 1361 Tool changer 24 Taper in spindle ISO 40 Spindle revolutions 10000 rpm Machine weight kg 3311

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 2 kW (2.72 HP), saw blade diameter: 350 mm, Radial arm saw Graule This machine can cut 90° only !!! Nlsdpfx Aajy Dgdkjaea Length of cut : 430 mm Depth of cut : 135 mm Sawblade-Ø : 350 mm Suction plant-Ø : 100 mm

Condition: new, Year of construction: 2023, 1 pc cast resin, epoxy dry distribution 3 phase transformer manufactured by TESAR Italy, 400kVA, 15000 ( ± 2 x 2,5 %) /400V; Dyn11, IP00, year of production 2018 ( connected / not energized ), ecodesign tier 1, project documentation and rutine protocol, manuals. Nledpfoyhxlkex Aaasa

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, The CNC-controlled measuring machine is fully functional and comes with various measuring probes. Nlsdpotq Ibnsfx Aaaja

Condition: used, Year of construction: 2010, functionality: fully functional, For sale: used balancing machine. Year of manufacture: 2010. Dimensions (W/D/H) approx.: 1,200 x 1,200 x 1,700 mm. Weight: approx. 400 kg. The machine can be inspected by appointment. Nodpfow Dpw Hsx Aaajla

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Description: Mitutoyo Manufacturer: Mitutoyo Type: CV-500 Njdpfx Aastxyv Ieaola The Contracer is complete with PC, software, monitor and vice.

Condition: excellent (used), Year of construction: 2003, The machine has very few working hours and has been in storage for many years) Performance: Nedpfxsupzf Re Aaaela Hole diameter and thickness up to max.: approx. 28×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angle 100x 100 x 10 Flat steel up to max.: 300 x10/ 200×13 mm (See also rating plate in the appendix). Machine weight: approx. 750 kg Various punches are also included with the machine

Condition: good (used), Year of construction: 2001, functionality: fully functional, Description Control system: Fanuc 21i-T Circulation diameter (max.): 260 mm Chuck diameter (max.): 250 mm Motor spindle speed: 4,500 rpm Nledetq Tnuepfx Aaaea Clamping cylinder: Full clamping cylinder Tool carrier: 12-position disk turret without lifetool Tool holder: VDI 40 Workpiece feed: Workpiece circulation belt with drag frame. Chip conveyor: Hinged belt conveyor.

Condition: good (used), Year of construction: 1998, Emag VSC 200 with workpiece conveyor and chip conveyor. The main spindle bearings were replaced in 2005. Nlodpfx Aetq Ifnoaaoa Control: Siemens 840D Turning diameter: Ø 260 mm. Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, width: 1,800 mm, height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only used in 1-2 shift operation.

Condition: used, Year of construction: 2001, functionality: fully functional, input voltage: 400 V, We offer 4 pieces Emag VL 3 for sale. Three machines with Lifetool. One machine without Lifetool. Year of construction of the machines 2000-2001 General description: Manufacturer: Emag Machine type: VL3 Nlodpetrdlaefx Aaaoa Technical data: Control: Fanuc 21i-T and Fanuc 18i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t A used three-jaw chuck is included with every machine. The description is non-binding and should be checked during an inspection.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 11721, Description: Control: Heidenhain TNC 430 Working range: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Tool holder: HSK40 Nljdpfx Aaotq H Sqoaoa Spindle speed Max 8,000 rpm Tool magazine: 30 places Max. Tool diameter: Ø 80 mm; with adjacent free spaces Ø125 mm. Max. Tool length: 300 mm. Max. Table load: 1,500 kg Dimensions and weight: Machine weight: approx. 7,200 kg Machine dimensions approx. : Width: 3.7 m; Depth: 4.3 m; Height: 3.0 m.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Nlsdjtpu Szopfx Aaaja Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 401 - 549, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 3,800 kg, total length: 7,430 mm, total width: 1,840 mm, total height: 1,950 mm, power: 4 kW (5.44 HP), input voltage: 24 V, Equipment: documentation/manual, emergency stop, foot remote control, The bending auxiliary bar is not included in the sale. Loading is covered by the seller; transportation is covered by the buyer. Nodpfxjy D E Tko Aaasla

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, clamping force: 700 kN, Equipment: documentation/manual, Seologica controll Clamping force: 70 t Screw diameter: 40 mm (highly resistant) Nsdpfx Asygtquoaasla Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Tie bar distance: 370x370 mm HxV plates: 510x510 mm Mould tickness min-max: 200 Stroke: 400mm Shot volume: 188 cm3 Type: Uni Drive: Hydraulic Air valve: 1 Hours: 23000 2 servo pumps 4 free cooling circuits 6 electric heating zones for mould

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Type: Multicomponent (2K injection) Nledpeyz Tmyefx Aaasa Drive: Hydraulic 2x hydraulic valve

Condition: good (used), Year of construction: 2011, functionality: fully functional, Description: The machine is in good technical condition, with testing possible by prior arrangement. Control system: OKUMA OSP-P200MA. Power consumption: 58 kVA. Travel distance in X-axis: 1000 mm, Y-axis: 900 mm, Z-axis: 1000 mm. Description: 4 axes. Weight: 26 t. Footprint: 3.3 x 6.5 m. Tool magazine capacity: 100. Tool clamping system: BT50. Machine parameters: Njdpfx Aoy Ehaioaasla Travels in X, Y, Z axes: 1000 x 900 x 1000 mm.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Shot weight: 375 g Distance between tie bars V: 530 mm Distance between tie bars H: 530 mm Shot volume: 412 cm3 Njdpfx Aeyz Nrfjaaola Type: Horizontal Drive: Hydraulic

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, working width: 3,000 mm, working height: 1,700 mm, Branded used hydraulic press designed for bonding frame structures such as window and door frames. The machine features a robust welded steel frame, constructed from thick-walled closed profiles and heavy-duty I-beams, ensuring high rigidity and strength. It is equipped with a central electro-hydraulic pump operated via a central control panel. The height of the bottom beam is adjustable in 3 positions. Nlodpfjvva Izjx Aaaja Working area dimensions: 3000 x 1700 mm Pump motor power: 2 kW Total pressing force: approx. 14 + 6 tons Overall dimensions: 3800 x 1000 x 2660 mm Weight: approx. 1800 kg Side-mounted swivel control panel Foot-operated control pedals Light curtain safety barrier