Used Friul Co Srl M44/700. for sale (34,200)

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Redpoyplwfjfx Afnst Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. Rodpfoyzr Nmjx Afnjt - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Redpfxeygh I Ue Afnjt Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: like new (used), Chanber size: 280x180x500mm upper Rsdpfed Sm Diex Afnjt 280x130x450mm lower Max temperature: 700 C °

Condition: used, Year of construction: 2005, color: blue, overall weight: 16,000 kg, maximum load weight: 15,999 kg, empty load weight: 1 kg, loading space volume: 51 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 2,700 mm, first registration: 06/2005, axle configuration: 2 axles, total length: 7,700 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40139 Krone, Swap body / Container Rodpfx Ajynrvlefnjt * Year of manufacture: 2005 * Length: 7.82 m * Fixed roof * Portal doors * Textile version * Complete double-deck including cross beams * Rail-loading capable - suitable for crane handling * Miscellaneous/Other * Gross vehicle weight: 16,000 kg * Unladen weight: 1 kg * Payload: 15,999 kg * Permissible total weight: 16,000 kg * Internal dimensions: L=7700 mm, W=2480 mm, H=2700 mm * Internal volume*: 52 m³ * Corner fitting dimension E = 5,853 mm * Overhang dimension = 983 mm * Support height: 1,120 mm * Pallet spaces: 19 * Manufacturer and year of construction unknown * Highlight: 7.82 m Liability disclaimer: Specifications subject to change, prior sale, and errors excepted. You will find further photos and videos on our website. Our comprehensive service includes for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Assistance with all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please do not hesitate to contact our trained staff – we will be pleased to advise you.

Condition: ready for operation (used), A surface grinding machine is offered. Horizontal grinding spindle, ball-bearing mounted, dual system, hydraulic: infinitely variable table speed, manual: handwheels for individual parts and fine adjustment, flat or V-guides. Inspection possible by appointment. Redpfsyuglusx Afnet

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Redpowhkywjfx Afnjt

Condition: used, Your contact person in our home Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you here a used studs for roller conveyors for sale. When placing the order the required stand height & stand depth please! Included in the scope of delivery: 01 x used studs, Material color: completely galvanized Stand height: 250 mm to 700 mm (freely selectable in turn) Stand depth: 300 to 700 mm (freely selectable in turn) More treble & bass can be customized on request. Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Redpodf S Eyefx Afnst Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge) Free shipping on request!

Condition: used, Year of construction: 1984, Manufacturer : Brogli + CO AG Model: Multi-Homo 5 CI 2563 Type : Vacuum mixer Year: 1984 Materials in contact with product: stainless steel. Useful capacity: 5 L Rsdpfx Ajx R A Hujfnst Total capacity: 6.8 L Jacket pressure: 1 bar Vessel pressure: vacuum / 0.5 bar

Condition: used, Year of construction: 1998, Manufacturer : Axomatic srl Model: Optima 900 Matic Rodpex R Arkefx Afnet Year : 1998 Type : Plastic tube filler Max capacity : 70 units / min Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A

Condition: used, Year of construction: 1995, Manufacturer: Ozaf srl Model: E 10 Year : 1995 Type : Elevating belt with cleats / Giraffe conveyor. Rsdpfex R Ap Ajx Afnjt   Power : 1,5 Kw Equipment: vibration system Overall dimensions: 65 x 135 x 190 cm Dumping height: 120 cm

Year of construction: 2021, condition: used, functionality: fully functional, complete 3-stage washing system, entirely made of stainless steel 1st stage: washing with hot water 2nd and 3rd stage: rinsing with cold water Rodpeyxgppefx Afnet workpiece passage height 2100 mm, depth 800 mm

Condition: new, empty load weight: 740 kg, maximum load weight: 1,960 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,960 mm, loading space width: 1,450 mm, loading space height: 1,800 mm, loading space volume: 8.1 m³, color: white, construction height: 2,380 mm, working width: 1,980 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, insulated floor / walls and roof 40mm ISO panels / refrigeration unit = Arktik 1600 N, * IMMEDIATELY AVAILABLE * incl. insulated floor / walls and roof 40mm ISO panels / refrigeration unit = Arktik 1600 N, Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATELY! - TÜV: 2 years - Floor: 40mm insulated floor - Gross vehicle weight: 2700 kg - Unladen weight: 740kg - Payload: 1,960 kg - Interior dimensions: 296 x 145 x 180 cm (L x W x H) - Exterior dimensions: 435 x 198 x 238 cm (L x W x H) - Loading sill height: 54 cm - Tires: 185R14C - Brake: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h: at extra charge Vehicle body: - Floor: Thermo Sandwich 40mm floor - Walls: Thermo Sandwich 40mm body - Roof material: Thermo Sandwich 40mm body - Chassis: KNOTT rubber spring axle - Number of lashing eyes: Can be retrofitted as an option - Rear door: Yes - Tailgate: No - Tailgate material: Thermo Sandwich 40mm - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 142 x 175 cm (WxH) - Interior light: YES 230V - Supports: Optional - Overrun device & brake: yes, KNOTT - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - 40 mm insulated thermo-sandwich body - Arktik 1600 N refrigeration unit - 1800 watt cooling capacity at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air volume flow 750 m2 - 230 V interior light via refrigeration unit - very sturdy welded steel frame - frame completely hot-dip galvanized - many sturdy cross members, therefore high point load - continuous side members - frame very torsion-resistant due to its sturdy design - interior light - 2 -wing. Lockable rear door with VA espagnolette lock - 2 maneuvering handles at the front - Maintenance-free rubber spring axles from KNOTT - Automatic reverse - KNOTT overrun device and parking brake - Very sturdy bolted V-drawbar - 13-pin plug - Large dimensioned safety lighting plug - large-dimensioned safety lighting with reversing light - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel Accessories optionally available: - aluminum checker plate on the floor - cast coating on the floor - rear supports mounted, the pair - front supports mounted, the pair - 100km/ approval with wheel shock absorbers - lashing rails, anchor rails, additional load securing, locking beams, tension belts, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rodpsu Hru Sofx Afnst

Condition: new, empty load weight: 681 kg, maximum load weight: 2,019 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,600 mm, loading space height: 300 mm, loading space volume: 1.5 m³, color: silver, construction height: 960 mm, working width: 1,660 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available!!! - TÜV: 2 years - Floor: Multiplex screen printing covered with sheet steel - Gross vehicle weight: 2,700 kg - Unladen weight: 681 kg - Payload: 2,019 kg - Interior dimensions: 305 x 160 x 30 cm (L x W x H) - Exterior dimensions: 446 x 166 x 96 cm (L x W x H) - Loading sill height: 66 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) Vehicle documents (letter) - 100 km/h: at extra charge Standard equipment: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Anodized double-walled aluminium drop sides - All drop sides can be folded and removed - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall elevation - Cargo net hooks on lower hinge parts - Sturdy eccentric locks - Galvanized sheet steel on multiplex floor plate - Reinforced, sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many standard features: - Many standard features: - New drop side hinges incl. welded hooks for attaching a cargo net, etc. hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts welded in throughout - all cross and longitudinal beams rest on the floor - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - U-profile at the rear for easier attachment of the loading ramps - Loading ramp shaft prepared - Solid 4-stage hydraulic cylinder - Electric hydraulic pump with battery (12V/90AH) in the box incl. cover - Detachable remote control for e-hydraulics with spiral cable and battery status display - External battery charging socket for optional 230V charger - Maintenance-free rubber spring axles from ALKO/BPW - Automatic reverse driveALKO/BPW overrun hitch and parking brake - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic support wheel in the middle Special equipment included in the price : - E-hydraulics for tipping with battery Accessories optionally available: - High front grille, 50 cm - Tarpaulin + bows in various heights Supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Redsu Ht Imopfx Afnet

Condition: new, empty load weight: 647 kg, maximum load weight: 2,053 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,800 mm, loading space width: 1,600 mm, loading space height: 300 mm, loading space volume: 1.3 m³, color: silver, construction height: 960 mm, working width: 1,660 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available!!! - TÜV: 2 years - Floor: Multiplex screen printing covered with sheet steel - Gross vehicle weight: 2,700 kg - Unladen weight: 647 kg - Load capacity: 2,053 kg - Interior dimensions: 280 x 160 x 30 cm (L x W x H) - Overall exterior dimensions: 420 x 166 x 96 cm (L x W x H) - Loading sill height: 66 cm - Tires: 195/50R13 steel rim - Brake: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 % warranty. Vehicle documents (letter) - 100 km/h: at extra charge DESCRIPTION: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Anodized double-walled aluminium drop sides - All drop sides foldable and removable - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall extension - Cargo net hooks on lower hinge parts - Sturdy eccentric locks - Galvanized sheet steel on multiplex floor plate - Reinforced sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame compl. hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts welded in throughout - all cross and longitudinal beams rest on the floor - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - U-profile at the rear for easier attachment of the loading ramps - Loading ramp shaft prepared - Solid 4-stage hydraulic cylinder - Electric hydraulic pump with battery (12V/90AH) in the box incl. cover - Detachable remote control for e-hydraulics with spiral cable and battery status display - External battery charging socket for optional 230V charger - Maintenance-free rubber spring axles from ALKO/BPW - Automatic reverse driveALKO/BPW overrun device and parking brake - 13-pin plug - reversing lights - large-dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic central support wheel Accessories optionally available: - High front grille, 50 cm - Tarpaulin + bows in various heights supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rjdpou Skx Hefx Afnjt

Condition: new, empty load weight: 824 kg, maximum load weight: 1,876 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.7 m³, color: silver, construction height: 990 mm, working width: 1,860 mm, Hydraulics, automatic reverse, hot-dip galvanizing, roof window, WITH UP TO 60 TILTING ANGLES + 5-stage cylinder, * IMMEDIATELY AVAILABLE * WITH UP TO 60 TILTING ANGLES + 5-stage cylinder! Technical data: - Type: New vehicle with 2 years MOT from first registration - Availability: Available immediately!!! - TÜV: 2 years - Floor: Multiplex screen printing covered with sheet steel - Gross vehicle weight: 2,700 kg - Unladen weight: 824 kg - Payload: 1,876 kg - Internal dimensions: 305 x 180 x 30 cm (L x W x H) - External dimensions: 438 x 180 x 30 cm (L x W x H) - Loading sill height: 69 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h: at extra charge Standard equipment: - New dropside hinges incl. very simple attachment option for a cargo net, among other things. - Anodized double-walled aluminium drop sides - All drop sides foldable all round - All drop sides removable - Sturdy welded steel frame - Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - 6 lashing brackets recessed inside the side edge (1000DaN/kg) certified by TÜV - lashing hooks on the frame - maintenance-free rubber spring axles from KNOTT - automatic reverse - KNOTT overrun device and parking brake - sturdy eccentric locks - reinforced, V-drawbar - 13-pin plug - Reversing lights Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in the rear frame - Automatic support wheel in the middle Special equipment included in the price : - E-hydraulics for tipping with battery - Emergency hand pump fitted for electric operation Optional accessories available: - High front grille, 70cm - Drive-on ramps - Rear supports - Tarpaulin + bows in various heights Supports, grids, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rsdpfx Afju N Nhnenet

Condition: used, mileage: 448,000 km, power: 309 kW (420.12 HP), first registration: 02/2010, fuel type: diesel, overall weight: 27,500 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, parking heater, Manufacturer Volvo Model FM 420 6x2?4 EEV Interconsult 12.700 l. Stainless Steel / Edelstahl Rodsynq Efjpfx Afnst Year 2010 Condition Very good Serial Number YV2JG10CXAA691507 Ref. nr. 588068 Reg. date: 24-02-2010 Hk: 420 Km: 448000 Gearbox: I-shift Eurotype: Euro 5 EEV Diesel tank: 1 Tank liter: 330 l Rear view camera: ? Air conditioning: ? Number of beds: 1 Cabin type: L2H1 Radio: ? Disc brake: ? ABS: ? Engine brake: ? WEB Tire Size: 385/65 - 295/80 - 385/65 Cover% left 40 - 40 - 30% Front suspension: Springs Suspension rear: Air Wheelbase: 4300 mm. Toolbox: ? Hydraulic system: ? Total weight: 27500 kg. Net weight: 14815 kg. Load capacity 12685 kg. Manufacturer: Interconsult Tank capacity: 12790 l. (11290 + 1500) High pressure pump: Pattisoli HPP-EL High pressure capacity: 102 l/ 160 bar. Vacuum pump: Jurop PR250 Vacuum capacity: 1550 m3/hour Remote control: ? Water heater: ?

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Rjdsvcqy Uopfx Afnst Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. Redpfsvtpq Hsx Afnet The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Rjdpfx Afoywdrfsnet Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system - Turntable with prism for pipe support placement - Driven internal pipe lance Redpfx Aoyn Inwofnet - Program storage: travel path, feed rate, blow-off function - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. Rjdpodrtansfx Afnjt For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Rjdpfxsxf Uwxo Afnet Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. Rjdpsynz Idjfx Afnst - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: new, Year of construction: 2024, conveyor belt length: 2,000 mm, conveyor belt width: 350 mm, conveyor belt speed: 33 mm/s, total length: 2,050 mm, total width: 450 mm, total height: 500 mm, overall weight: 50 kg, discharge height: 500 mm, Equipment: documentation/manual, emergency stop, type plate available, NP 2000 - U 350 O 76 mod.NP (BLADE SEPARATOR) STANDARD FRAME Profile type: STANDARD FRAME Drive roller diameter: 76 STANDARD Bottom flat part length: 2000 mm Usable width: 350 (actual width 345 mm) Loading height external: 300–500 mm Belt type: BLACK PVC ROUGH FINISH BELT LATERAL MOTOR Motor: 0.18 kW 4P B14 400V THREE-PHASE 50 Hz 400V THREE-PHASE / RIGHT SIDE Gearbox: RMI40P 1/100 63 B14 (3.3 m/min) Rjdpeyym Izjfx Afnst Load hopper: 700 x 550 x H. 200 mm GALVANIZED STEEL SUPPORT Support type: WHEELS Control unit: START/STOP switch Control: ON/OFF + emergency button 400V THREE-PHASE 50 Hz on left side