Used Fresia Snow Shovel for sale (548)

Condition: used, mileage: 44,050 km, power: 75 kW (101.97 HP), first registration: 12/2020, overall weight: 2,161 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, total length: 4,408 mm, total width: 1,793 mm, total height: 1,823 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle no.: 9212X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available at the best selection and best price. More than 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent Condition! First owner, German vehicle, non-smoking vehicle. Fully documented service history exclusively at Volkswagen. New brakes front and rear. Iodpfx Asym It Djn Ujar As-new all-season tires front and rear. Winter service equipment: Snow plow "BOSS" Salt spreader "BOSS" Sweeper brush "BOSS" Cargo area shelving system LED floodlight Audio system Composition Audio (monochrome display, SD card interface, AUX-IN) Air conditioning Heated seats Position light Upon request, we offer retrofitting of a tow bar for only 599 euros. If possible, also increasing the towing capacity up to 3.5t. ----Special Equipment: * Audio system Composition Audio (monochrome display, SD card interface, AUX-IN) * Speakers (2) * USB multimedia interface (iPhone / iPod) with AUX-IN * Connectivity package * Bluetooth interface for mobile phone * WLAN hotspot * Air conditioning * Lockable and illuminated glove compartment * Leather steering wheel * Leather trim package (gear knob and handbrake lever in leather) * Gear knob in leather * Handbrake lever in leather * Spare wheel matching road tires (steel) * On-board tools and jack * Tow bar * Rubber floor covering in front * Rear parking aid * Remote central locking key (2), foldable * Smoker package * Heated front seats Standard Equipment: Passenger side airbag, passenger airbag deactivatable, engine 2.0 L - 75 kW TDI, TDI model, third brake light, driver side airbag, Anti-lock Braking System (ABS), traction control (ASR), drive type: front-wheel drive, BlueMotion Technology package, aspherical exterior mirror left, electrically adjustable and heated exterior mirrors, convex exterior mirror right, passenger car configuration of exterior mirrors, BlueMotion Technology, brake assist, comfort headliner front, roof rail/roof rack preparation, EcoProfi, electronic differential lock (EDS), electronic stability program (ESP), Hill Start Assist, Multi-Collision Brake, tinted laminated windshield, 5-speed gearbox, tailgate, interior filter: dust and pollen, body/construction: panel van, high cargo partition, no window, manually adjustable steering column (height and reach), truck registration, engine drag torque control (MSR), standard payload, wheelbase 2,682 mm, particulate filter, low emissions according to Euro 6d-TEMP standard, wipers with interval control, halogen H4 headlights, right sliding door, SCR system (AdBlue technology), front side airbags with head airbag unit, side protection strips, electronically controlled power steering (Servotronic), seat belts with pretensioners and height adjustment, height adjustable driver's seat, right front seat, seat cover/upholstery: fabric, daytime running lights, first-aid kit and warning triangle, seat belt warning system, electronic immobilizer, green-tinted heat-insulating glazing, remote central locking. ----Inspection/Emissions test (HU/AU) new upon request. ----Warranty & “TÜV Professional Check” are of course available with us! We are happy to accept your vehicle in part exchange! We first

Condition: used, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 42,990 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, traction control, trailer coupling, = Additional Options and Equipment = - Adaptive Cruise Control - Heated Mirrors - Leaf Suspension - Power Brake Booster - Differential Lock - Low Noise - Speed Limiter - Air Conditioning - Air-Suspended Seats - Reversing Camera - Power Take-Off (PTO) = Notes = X TO GO "EUROMIX TO GO" OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, DIRECTLY FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS FACING AN URGENT NEED (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT) Your Advantages: - Ready-to-use complete vehicles (Concrete Mixer/Dumper) - Immediate availability directly from the manufacturer - Assembly, installation, commercial vehicles - Best price-performance ratio - Financing options - Trade-in of your used vehicles Renault K 480 8X4 Euro6e Euromix MTP TMK 18m³ Half-Pipe Tipper (Hardox® 500 Tuf) Vehicle Specifications: - ENGINE DE 13, displacement 12.8 litres, max. output: 360 kW at 1404-1700 rpm - Optidriver gearbox AT 2612 (14.94 - 1) - Wheelbase: 4350 mm - Rear axle ratio: 3.33 - Tyre size: 315/80 R22.5 - Two electrically adjustable and heated exterior mirrors - Tinted rear window Ijdpfx Aoyzayasn Ujar - Pre-equipment for CB radio - Rubber floor mats - LUXURY DRIVER'S SEAT: Adjustable vertical suspension - Seat cushion tilt, longitudinal and height adjustment - Removable cover, adjustable headrest, quick lowering function with height memory - Adjustable side supports for backrest and seat cushion - Adjustable lumbar support - Seat cushion extension - Driver's seat heating and ventilation - Two armrests on driver's seat - Viscope exterior sun visor - Air gun in cab Tipper Body Equipment: - Euromix MTP TMK 18m³ Half-Pipe Tipper (Hardox® 500 Tuf) - Half-round design - CE-certified - Floor: Hardox® 500 Tuf - 6mm - Sides: Hardox® 500 Tuf - 5mm - Pendulum tailgate - Spare wheel holder with hoist - Aluminium mudguards - Versatile lighting options - Access steps to the tipping body (steps inside tipping body) - EuromixMTP scissors-type tipping stabilizer Accessories: - Hydraulically operated tailgate - Tarpaulin, manual or electric - Asphalt chute - Toolbox - Shovel and broom holder - Fire extinguisher - Work lights - Manual or electric sliding tarpaulin, with or without protective roof - Foldable underrun protection - Partial unloading for small areas EUROMIX REAR TIPPER – DURABLE AND ROBUST FOR YOUR OPERATIONS! For further questions, our team is available in the following languages: - We speak German - We speak English - Nous parlons français - Mówimy po polsku - Мы говорим по русски - Govorimo Srpskohrvatski = Further Information = Year of manufacture: 2026 Front axle 1: steered Front axle 2: steered Number of cylinders: 6 Gross Vehicle Weight (GVW): 41,000 kg Superstructure brand: EuromixMTP TMK 18 APK (Technical Inspection): New TÜV certificate upon delivery Please contact Harun Cevik, Jamila Azzi, Henri Omeragic, or Denis Omeragic for more information.

Condition: used, mileage: 53,598 km, power: 115 kW (156.36 HP), first registration: 07/2024, fuel type: diesel, empty load weight: 2,309 kg, maximum load weight: 1,191 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 4,100 mm, next inspection (TÜV): 09/2026, fuel consumption (urban): 727 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,274 mm, loading space volume: 16 m³, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2024, lifting height: 2,700 mm, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, CERTIFIED PRE-OWNED Plus, Color: White IC 194, Current tires: M+S (Mud and Snow) tires, Unladen weight: 2,309 kg, Permissible total weight: 3,500 kg, Cargo area (L x W x H): 4,680 mm x 1,800 mm x 1,900 mm, Tire size: 225/65 R16, Cargo volume: 16 m³, 1st axle: , 2nd axle: , Seats: fabric upholstery, Interior color: grey, Leaf spring suspension, 1 x airbag, Digital tachograph, Towing hitch (ball): Towing capacity 3,500 kg, Electronic Stability Program (ESP), Traction control system (ASR), Automatic climate control, Height-adjustable driver’s seat, Dual passenger bench, Headlight range adjustment, Radio, Digital radio reception (DAB), Multi-function display, AUX & USB port, Bluetooth audio streaming, Bluetooth hands-free preparation, Rear parking sensors, Multifunction steering wheel, Power steering, Height-adjustable steering column, Electric windows (2x), Outside temperature display, Electrically adjustable and heated exterior mirrors, Wide-angle mirror, Immobilizer, Central locking with remote control, Bulkhead with window, Wooden cargo floor, High-impact plastic cargo wall paneling, Rear doors with 270° opening angle, Right-hand sliding door, Hill-start assist, Daytime running lights, 1x13-pin socket, Cup holders, Drive mode selection: ECO driving mode, 12V 13-pin trailer socket, Steering with City function, Start/Stop system, Heated fuel filter, Third brake light, Storage compartment under passenger seat bench, 2 rows of lashing rails in cargo area, Fuel tank: 70 liters, AdBlue tank: 20 liters, Rear step, Payload: 1,191 kg, Former rental vehicle, VEHICLE LOCATION: 90441 NÜRNBERG, DIESELSTR. 65. Contact: Mr. Bächer, Tel. , Financing available. Errors and changes excepted. Iaedsy Ap Ntepfx An Uer

Condition: used, mileage: 32,900 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, first registration: 07/2024, emission class: euro6, color: black, number of seats: 8, total length: 5,370 mm, total width: 1,928 mm, total height: 1,901 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 174 kW (237 hp) at 4200 rpm * 2-way speakers front and rear * 3-seater comfort bench, 1st row, outer seat foldable * 3-seater comfort bench, 2nd row, outer seat foldable * 9G-TRONIC automatic transmission * AGILITY CONTROL suspension * ATTENTION ASSIST * AVANTGARDE package * Adaptive brake lights * Aerodynamics package * Passenger airbag * Active Distance Assist DISTRONIC * Active Brake Assist * Active catch for sliding door * Active Speed Limit Assist * Active Steering Assist * Active Lane Keeping Assist * Permanent all-wheel drive * Ambient lighting, 64 colors in cockpit and rear * Armrests for passenger compartment seating * Exit lights * Automatic front passenger airbag deactivation * Exterior mirror, automatic folding * Illuminated grab handle in rear with reading spot * Illuminated vanity mirrors * Front footwell lighting * Hill-start assist * BlueEFFICIENCY package * Brake booster failure compensation * CO2-optimized braking system * Tinted privacy glass in rear (black glass) * Removable cupholders on rear armrests * Roof lining * Digital interior mirror * EASY PACK Package – electric sliding door/tailgate * EASY-PACK tailgate * ECO start/stop function * Emission standard Euro 6e RDE5 M/N1 Gr. II * ENERGIZING Comfort * Anti-theft alarm system * Electric operation for sliding door left * Electric operation for sliding door right * Trailer socket electrics * Enhanced automatic restart in highway traffic * Driver assistance package * Headlight assist * HVO capable vehicle * Misfuel protection * Fixed rear windows * Fixed window front right, in side wall/sliding door * Fixed window front left, in side wall/sliding door * Electric parking brake * Generator 14 V / 250 A * Alternator management * Weight variant 3,200 kg * Seat belt warning for passenger seat Iaedoyhunwepfx An Uor * HOLD function * Entry grab handle * Rear grab handle * Main fuel tank 70 liters * Head unit for Europe/CIS/Mongolia * Heated windshield washer system * Manufacturer: Mercedes-Benz AG * Interior headliner crystal grey * Wireless charging system for mobile devices * Passive child detection in vehicle * Child safety locks on passenger compartment doors * Semi-automatic climate control, TEMPMATIC in rear * THERMOTRONIC automatic climate control * Comfort passenger seat * Overhead comfort control unit * Comfort driver's seat * Comfort tires * Comfort closing * Communication module (LTE) for digital services * Complete vehicle * Paint color obsidian black metallic MB 9197 * Leverkusen * Left-hand drive * Luxury estate car * Lugano leather, black * Leather steering wheel * 17" x 7J alloy wheels, 20-spoke design * Steering wheel adjustable in tilt and height * Heated steering wheel * Live Traffic Information * Lumbar support for driver and passenger seat * Luxury estate car * Extended seat rails for rear seats * M+S (mud and snow) tires * MBUX multimedia system High * MULTIBEAM LED w/ High Beam Assist PLUS * Media interface cable kit * Mercedes-Benz Mobilo with DSB and GgD * Mercedes-Benz emergency call system * Metallic paint * Center console with roller cover * Center airbag * Multifunction steering wheel * Rear night lighting * Navigation * Parking package with 360° camera * Premium complete wheel protection (3 years) * Wheelbase 3,430 mm, long overhang * Tire pressure monitoring, front and rear axle, wireless * Sliding door left * Tail, brake and indicator lights in LED technology * Illuminated entrance sills with Mercedes-Benz lettering * Separately opening rear

Condition: used, mileage: 133,050 km, power: 120 kW (163.15 HP), first registration: 03/2019, overall weight: 2,900 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, loading space width: 1,620 mm, loading space length: 1,430 mm, loading space height: 1,000 mm, total length: 5,254 mm, total width: 1,954 mm, total height: 1,834 mm, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Internal vehicle no.: 5617X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide Always over 400 vehicles immediately available at Largest selection - Best price More than 1000 satisfied customers per year - Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition! Single owner, German vehicle, non-smoker vehicle Full service history exclusively at Volkswagen Next service in 36,800 km Comes with 8 tires Winter tires on steel rims As-new snow plow “Schoon Fahrzeugsysteme” Winter service vehicle With road approval Tow bar, permissible trailer load 3,000 kg Bott drawer system in load compartment All-wheel drive ---- Special features: * Composition Media audio system (touchscreen, radio/CD player, MP3, Bluetooth) Ijdpfxsymcrze An Uear * Electronic voice amplification (internal communication) * Multimedia interface USB (iPhone / iPod) with AUX-IN * Bluetooth interface for mobile phone * App-Connect * Climatronic 2-zone air conditioning * Interior filter: dust and pollen filter with activated carbon filter * Steering wheel (leather) * Partial leather trim (gear/shift lever and handbrake lever in leather) * Gear/shift lever in leather * Handbrake lever in leather * Winter package * Heated washer nozzles * Washer fluid level display * Heated front seats * Tow bar * Differential lock (rear axle) * Rubber floor mats * Highline hardtop (pick-up) * Comfort tailgate (lockable, pick-up) * Load area coating * Exterior warning chevron tape Standard features: Electronic Stability Program (ESP) Brake assist, ASR/ABS, EDS, Anti-lock Braking System (ABS), Offroad ABS, Brake assist, Electronic differential lock (EDS), Traction control system (ASR), Electronic Stability Program (ESP), Full-size spare wheel on steel rim, Onboard tools and jack, Second row bench seat (3 seats), Third brake light LED, Deactivatable passenger airbag, Driver and passenger airbag, Drive type: all-wheel drive, Left aspherical exterior mirror, Electrically adjustable and heated exterior mirrors, Left convex exterior mirror, Painted exterior mirrors, Rear floor covering (carpet), Front floor covering (carpet), Cloth headliner, grey, Driver assistance system: trailer stabilization program, Hill start/descent assist, Multi-collision brake, Power windows front and rear, One (1) folding remote key, Cruise control system, 6-speed gearbox, Lockable glove compartment, Heated rear window, Interior trims in Deep Inox, Isofix mounts for child seats in rear, Body style: double cab (double-cab), Body style: pick-up, Wheel arch extensions in body color, Black grille with chrome strip, Manually adjustable steering column (height/length), Headlight range adjustment, Facelift model, Engine 3.0L - 120 kW V6 TDI, Multifunction display Plus, Rear fog light, Wheelbase 3097 mm, Smoker package, Diesel particulate filter, Low emissions according to Euro 6, Front and rear mud flaps, Front side airbag with head airbag unit, Electronically controlled power steering (Servotronic), Front seat belts with height-adjustable belt tensioner, Fabric seat upholstery, Rear bumper black unpainted, Daytime running lights, Door seals with dust protection, Exterior door handles body color.

Condition: used, mileage: 357,245 km, power: 210 kW (285.52 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 10,615 kg, maximum load weight: 7,355 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,850 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,400 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, crane, fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, trailer coupling, * German vehicle * 1st hand * original ONLY 357,245 km * Condition, see photos * Complete documentation & inspection book available * 4x4 all-wheel drive * Atlas crane foldable behind the driver's cab * Type: TLC 65.2-A 1L * Radio remote control * Floor control * Lifts at: 1.9m = 3,100kg - 3.7m = 1,700kg - 5.4m = 1,120kg - 7.2m = 780kg * Hook height 9 m * 5th & 6th control circuit * 2 hydraulic supports * Meiller 3-way tipper * L=4,000 x W=2,400 x H=600 mm * DIN lashing eyes * Trailer coupling * Trailer load: 24,000 kg * Trailer hydraulics * Municipal plate * Municipal hydraulics * Schmidt municipal control * Winter service lighting * 8-speed manual transmission * Air conditioning * Rear wall of driver's cab with window * Electric windows * Electric mirrors, heated * Heated windscreen * Comfort driver's seat, air-suspended * Seat heating * Radio CD * Rotating beacons * Differential lock * ABS (anti-lock braking system) * Leaf spring suspension * Roof hatch * Fog lights * Raised exhaust system * Sun visor * Work lights * Wheelbase: 3,850 mm * GVW: 18,000 kg * Empty weight 10,615 kg * Payload: 7,385 kg * Snow blade and salt spreader available for an additional charge * Grabber available for an additional charge If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. Iodpfx Ajv Azw Don Uoar - .

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Iaedpfx Ansyxb E Ee Uor Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss alloy wheels Aluminum leaning ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: like new (used), functionality: fully functional, mileage: 4,500 km, power: 139.74 kW (189.99 HP), first registration: 01/2025, overall weight: 7,490 kg, empty load weight: 6,504 kg, Year of construction: 2024, operating hours: 175 h, Dear Sir or Madam, We are offering a Unimog U 319 for sale. The vehicle is in like-new condition. Vehicle features: - Trailer brake, dual-line - Front mounting plate size 3 - VarioPilot (convertible steering, right/left) - Air conditioning - Comfort driver's seat (seat suspension, air-sprung, with seat heating) - Automatic Shift (EAS) - EasyDrive (hydrostatic drive) - Hydraulic system, dual-circuit, 2-cell fully proportional with snow plow relief - CLASSIC control system - Platform body - Clean Fix rapid radiator cleaning system - Engine PTO including front PTO - Weight variant - And much more. Sale in current condition and exclusively to other businesses/traders only! Our business hours: Mon–Thu: 07:00 - 15:30 Fri: 07:00 - 15:00 Offer subject to our general terms and conditions! Sale to professionals only! Used vehicles / used equipment sold as seen and without warranty as per our terms and conditions. Should you have any further questions, please feel free to contact me. Iaodoyyxcwopfx An Ujr For viewings and/or test drives, please schedule an appointment in advance! Vehicles/equipment are not always onsite.

Condition: excellent (used), functionality: fully functional, mileage: 168,913 km, power: 162 kW (220.26 HP), first registration: 02/2005, overall weight: 10,000 kg, axle configuration: 4x4, empty load weight: 6,175 kg, next inspection (TÜV): 09/2026, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2005, Equipment: ABS, cruise control, differential lock, MAN LE 10.220/Winter Service/Swap Body System/Spreader/Plow/4x4/Municipal • Manufacturer: MAN • Model: LE 10.220 • Mileage: 168,913 km • First Registration: 02/2005 • Power: 162 kW / 220 HP • Drive Configuration: 4x4 • Swap body system • Three-way tipper: L 2.90 m x W 2.10 m x H 0.40 m • Transmission: Manual, 6-speed • Suspension: Leaf spring (front/rear) • Snow plow, Schmidt Group: CP3 • Spreader unit, Epoke: SH3201 • ABS • Speed limiter • Cross-axle differential lock • Rear axle differential lock • Transfer case (low-range gearing) Iaodpfx Asydk Dmen Ujr • Selectable front-wheel drive • Heated windscreen • Winter service headlights • Tipping operation • Reversing camera • Unladen weight: 6,175 kg • Payload: 3,825 kg • Gross vehicle weight: 10,000 kg • Emission standard: Euro 3 • TÜV valid until September 2026 • German vehicle • German documentation • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale according to our Terms and Conditions.

Condition: used, mileage: 63,320 km, power: 115 kW (156.36 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 2,309 kg, maximum load weight: 1,191 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 4,100 mm, next inspection (TÜV): 07/2026, fuel consumption (urban): 727 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,274 mm, loading space volume: 16 m³, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Year of construction: 2024, lifting height: 2,700 mm, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, CERTIFIED PRE-OWNED Plus, color white (IC 194). Current tires: M+S (Mud and Snow) tires. Unladen weight: 2,309 kg, permitted gross weight: 3,500 kg. Cargo area (L x W x H): 4,680 mm x 1,800 mm x 1,900 mm. Tire size: 225/65 R16. Cargo volume: 16 m³. Front and rear axle data available upon request. Seats: fabric, interior color: grey. Leaf spring suspension. 1 x airbag, digital tachograph, trailer coupling (ball type) with towing capacity of 3,500 kg. Electronic Stability Program (ESP), Traction Control (ASR), automatic climate control, height-adjustable driver’s seat, dual passenger bench seat, headlight range adjustment, radio, digital radio reception (DAB), multi-function display, AUX & USB port, Bluetooth audio streaming, hands-free Bluetooth preparation, rear parking sensors, multifunction steering wheel, power steering, adjustable steering column, dual electric windows, outside temperature display, electrically adjustable and heated exterior mirrors, wide-angle mirror, immobilizer, central locking with remote control, partition with window, wooden cargo floor, high-grade plastic side wall protection in the cargo area, rear doors with 270° opening angle, right-side sliding door, hill start assist, daytime running lights, 1 x 13-pin socket, cup holders, driving mode selection: ECO program, 12V 13-pin trailer socket, steering with "City" function, Start/Stop system, heated fuel filter, third brake light, storage compartment under passenger bench seat, 2 rows of lashing rails in cargo area, 70-liter fuel tank, 20-liter AdBlue tank, rear step, payload: 1,191 kg. Former rental vehicle. VEHICLE LOCATION: 90441 NUREMBERG, DIESELSTR. 65. Your contact: Mr. Bächer, phone: [number]. Financing available. Errors and changes excepted. Iajdpfx Anjy Abkpe Uer

Condition: used, Year of construction: 2024, operating hours: 49 h, Rampicar ROTAIR R70AE Tracked Dumper Tool Carrier, Year 2024, approx. 49 operating hours, as new Description: * Maximum undercarriage load capacity 800kg * Honda GX390 petrol engine with electric start * Mono joystick for drive control * Hydrostatic drive system * Separate drive motors for each side * Undercarriage with centrally mounted oscillating rollers * Mechanical emergency brake Iajdpfx Ansyyc Nzo Ujr * Tipping skip with self-loading shovel * 1 free hydraulic circuit with control lever * Various attachments can be fitted optionally; see Rotair manufacturer’s brochure (link) Despite our utmost care, errors in this listing cannot be completely excluded. Subject to errors and prior sale!

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Ijdpefdkb Tofx An Uear - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany Isdpeh R Taqofx An Ujar - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg Isdpfx Asmhhypsn Uear - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) Iaodpomhh Dhofx An Ujr - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg Iedpfxjmhh Dze An Ujar - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Ijdpfx Ansd Tbbdj Uoar Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Iodpfxomhhx Io An Uear We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) Iodpsmhhyaofx An Uoar - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Iajdpod Tqaljfx An Ujr - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Ijdpfeh Ek Daox An Usar Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Ijdpfxsmhh Anj An Uear Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Iedpfjfdkb Usx An Uoar - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Iedpfofdkbhsx An Uear The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm Iaedpfx Ansguk Dko Uor - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.