Used Fröling Heating for sale (14,789)

Condition: excellent (used), Buderus heating boiler SK635 / 555 kW Iijdpfxsyr Aids Aa Iec

Condition: excellent (used), Viessmann Paromat Duplex boiler in excellent condition, 1070 kW Iedpfx Aaeyzctis Ijic

Condition: excellent (used), Viessmann Vitomax heating boiler 2100 kW. Isdeyzct Njpfx Aa Ieic

Condition: excellent (used), Viessmann Vitoplex 105 kW low-temperature boiler (0025) for oil or gas Isdpjxqr Aijfx Aa Isic

Condition: excellent (used), Loos 1000kW heating container emergency heating with gas burner Conversion to oil or biogas possible Iiedpfsy Evltex Aa Ijc

Condition: excellent (used), Year of construction: 2006, Vitoplex 300 105Kw Year: 2006 Type:TX3 Power: 105Kw With gas or oil burner Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Ijdpfx Aotu Tv Asa Ieic Loading possible Request more information

Condition: excellent (used), Buderus GE315 heating boiler 230kW (0295), available with oil or gas burner on request Iiedsxqry Iopfx Aa Iec

Condition: excellent (used), Heating boiler Viessmann Vitorond 100kw/6101/01 Iodpfx Ajxq Hvqja Ijic

Condition: excellent (used), Heating boiler Loos UT 5200Kw.incl.oil burner Iiodemn Hpyspfx Aa Iec

Condition: excellent (used), Low temperature boiler,Buderus SB615 power 510KW ,120Grad ,5,5Bar,gas or oil burner possible Iiodpfsqww Icex Aa Ijc

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. Iisdpfek S Dt Tex Aa Isc - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Iodpfx Aajgrkigs Isic hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press Iijdpfjx Ap Itjx Aa Ioc - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens Iiodpfx Aastwv S No Iec - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: used, KMA Heat Exchanger and Pumping Station Iisdpfsym Dx Asx Aa Ijc

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, underfeed firing system with a moving grate, output 550 kW, year of manufacture 2018, including feed screw with backfire protection, including infeed screw, including pneumatic cleaning, including flue gas recirculation, including multi-cyclone separator, including ash removal system, including control system for Schmid boilers, including electrostatic precipitator from Meisterfilter, including control system – electrostatic precipitator, including ash removal system for electrostatic precipitator, including flue gas fan. Dismantling must be carried out by the buyer. Iedpfx Asvgcwmja Ieic Not included: - Bunker discharge system - Chimney Information regarding the bunker discharge system: If you are interested in a moving floor or agitator discharge system, I can assist you.

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) Iedpfxsw Ug Ato Aa Isic 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Iijdpfx Aasy Uuwme Ijc Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Isdpey Uuu Eefx Aa Ijic Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated continuous furnace system, make Safed consisting of: Magnetic feeder Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Iisdjy Ur Aajpfx Aa Iec Temperature: max. 950°C Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Bath temperature: max. 80°C Washing system Annealing furnace

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm Iisdpfeu U Ey Isx Aa Ioc ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Year of construction: 2003, condition: used, Technical details: operating pressure: 10 bar voltage: 400/50 V/Hz control voltage: 24 V total power requirement: 0,76 kw weight of the machine approx.: 160 kg dimensions L x W x H: 0,58x0,68x1,35 m heat exchanger application area: transportation of heat energy from a medium to another medium (liquid or gas) connections 3/4" for flow/return 2x both sides Iiedpfxju N Afgs Aa Ioc 2 Pieces available *

Condition: new, functionality: fully functional, power: 11.2 kW (15.23 HP), fuel type: diesel, fuel consumption per hour: 4 l/h, color: orange, operation weight: 1,550 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: adjustable chassis, air conditioning, cabin, parking heater, rubber tracks, The SE18 mini excavator, belonging to the 1.8-ton class, impresses with its compact dimensions, powerful performance, and high-quality equipment for professional use. Equipped with the proven Kubota D902 diesel engine, modern hydraulics, a comfortable fully enclosed cab with air conditioning, a heating function with remote control, and a comprehensive set of buckets, this machine is ready for immediate use. Whether in civil engineering, gardening and landscaping, municipal applications, or on confined construction sites – the SE18 offers maximum flexibility, high reliability, and excellent value for money. ✅ Key Features at a Glance ✅ Kubota D902 3-cylinder diesel engine – reliable, fuel-efficient, and durable ✅ 1,550 kg operating weight – compact, stable, and powerful ✅ Fully enclosed cab with ROPS/TOPS – CE-certified and safe ✅ Air conditioning with heating function and remote control – comfortable operation in all seasons ✅ 2 auxiliary hydraulic circuits – suitable for hammers, grapples, earth augers, and more ✅ Adjustable undercarriage 1,000 – 1,250 mm – perfect for confined construction sites ✅ Side-swinging boom left/right – precise operation near walls, edges, and obstacles ✅ Mechanical quick coupler included ✅ 3 buckets included in the set ✅ Immediately available – delivery possible 🔧 Technical Data Model: SE18 Class: 1.8 t mini excavator Operating weight: 1,550 kg Engine: Kubota D902, 3-cylinder diesel Power: 11.2 kW Undercarriage: Rubber tracks, 230 mm Adjustable undercarriage: 1,000 – 1,250 mm Blade: 1,100 mm Boom: Side-swinging left/right Pin diameter: 25 mm Auxiliary hydraulics: 2 auxiliary circuits Fully enclosed cab, CE-certified, ROPS/TOPS Air conditioning with heating function, opening front window, sliding side window Included in the scope of delivery: ✔ Digger bucket 30 cm with teeth ✔ Digger bucket 50 cm ✔ Digger bucket 80 cm ✔ Mechanical quick coupler ✔ Hydraulic thumb / grapple thumb ✔ Air filter ✔ Fuel filter ✔ Oil filter ✔ Tool box ➡️ Get in, start, and work – the machine is ready for immediate use. Iisdpfx Aasx H Tiro Ioc 🛡️ Safety & Certification The machine is CE-certified and complies with the relevant European directives: ✅ 2006/42/EC – Machinery Directive ✅ 2014/30/EU – EMC Directive ✅ 2011/65/EU – RoHS Directive The cab is equipped with a ROPS/TOPS safety structure and offers the operator protection, a clear view, and comfort. 🧰 Service & Warranty ✅ 12-month warranty throughout Europe ✅ Spare parts available directly from stock ✅ Service and advice from Rheda-Wiedenbrück ✅ Inspection and testing on site possible 🔥 Summer promotion price only €11,890 net – complete set included! 📍 Location: Rheda-Wiedenbrück, Germany 🚚 Delivery possible ✅ Immediately available ✅ Machine is ready for use Our machines can be inspected and tested on site. Contact us for more information, a customized offer, or a short-notice inspection.

Condition: used, tank capacity: 250 l, total length: 1,490 mm, total width: 900 mm, total height: 1,730 mm, outer diameter: 790 mm, wall material: stainless steel, Used stainless steel tank Article number: 10176 Iiodpfx Aajy Uurdj Ioc Volume: 250 L Type: Standing on a roller frame Material (in contact with the medium): Stainless steel V4A / AISI316 Number of fixations: Roller frame Bottom: Conical bottom Top: Conical bottom Operating pressure of the tank according to the nameplate: Atmospheric Tank dimensions: Tank diameter: Ø 790mm Tank height: 1000mm Distance from outlet to bottom: 480mm Overall height: 1730mm Overall width: 900mm x 1490mm Height of the feet: 130mm Materials: Inside: 1.4571 / AISI316 Exterior parts: 1.4571 / AISI136 Equipment: Centered on the top: 1x dome cover Ø 400mm Connections on the top: See photo Pump Control cabinet Electric heating element

Condition: used, Year of construction: 2016, operating hours: 32,318 h, functionality: unexamined, power: 30 kW (40.79 HP), Used Spanner HKA 30, year of manufacture 2016. Iedpfx Aaszbnklo Ioic The unit was fully operational. It has already been dismantled and is ready for collection. 30 kW electric 73 kW thermal Operating hours: 32,318 Engine: GM 5.7L, non-turbo Includes complete control cabinet and numerous accessories.