Used Engel Victory 330H/80V/160 Combi Ecodrive for sale (8,623)

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. Tedpfx Afjzmrf Nsxja A linear robot is included, but it has never been used and was probably not programmed.

Condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich electric forklift -Type: GNM5460E-G18 -Motor: 24V/240W -Dimensions: 150/130/H365 mm -Weight: 7 kg Todpfsi Dud Sex Afxsa

Condition: good (used), Geared motor, electric motor, electric geared motor, permanent magnet motor -Manufacturer: Engel, Permanent Magnet Motor Gear Motor with Brake -Motor type: GNM31650-G2.6-B5.2 -Voltage: 24 V / 50 W / 3000 rpm -Transmission: Type G 2.6 i= 30:1 -Shaft: Ø10 x 23 mm Tjdpfx Afoi E Af Ajxoa -Protection rating: IP54 -Brake: 0.5 Nm -Dimensions: 250/125/H95 mm -Weight: 2.4 kg

Year of construction: 2005, condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H Tedpfxji Aqa As Afxoa -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Todpfx Ajzl S Rpefxea The machine has not been inspected but was in working order until the end.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, injection pressure: 1,441 bar, total length: 7,980 mm, total width: 2,200 mm, total height: 2,570 mm, overall weight: 30,750 kg, Clamping force: 3500 kN Platen size (h x v): 1050 x 980 mm Minimum mould height: 350 mm Maximum platen distance: 1300 mm Opening stroke: 950 mm Screw diameter: 70 mm Shot volume: 1039 ccm Injection pressure: 1441 bar Equipment Tsdpfx Afszgt Irsxea Screen text in German Hydraulic core pull 2x Machine including conveyor belt Machine including handling unit Machine including safety enclosure Machine without material hopper Leveling elements Handling Data Manufacturer: ENGEL Control: ER-HLI 81 Year of manufacture: 2004 Machine dimensions (LxWxH): 7.98m x 2.22m x 2.57m Total weight: 30750KG

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 160091, clamping force: 2,200 kN, Title: ENGEL Victory 1350/220 Tech (2006) - Tie-barless - Incl. Original ENGEL spare parts offer! Tjdpfezc Hn Sex Afxea General condition: The machine was in production use until recently. It is currently being sold as "in need of repair / for spare parts" (not functional due to damage to the internal hydraulic pump). Ideal for dealers, machine repair companies, or injection molding companies with their own repair facilities. Additional advantage / bonus: We will provide the buyer with the official ENGEL repair offer (total value: approx. €20,200). This includes the exact original part numbers (OEM) for all required components (hydraulic pump combination RKP140_80, Rexroth/STAR linear systems, piston rod seals, and complete wear ring sets). This will save you time in troubleshooting and provide the perfect template for the repair. Technical data: Manufacturer: ENGEL (Austria) Model: Victory 1350/220 Tech Year of manufacture: 2006 Machine no. (serial number): 160091 Clamping force: 220 tons (2,200 kN) Tie-barless technology: Maximum flexibility for large molds and quick changeovers Tie bar diameter: 60 mm (large-volume version) Control system: CC100 / CC200 Machine weight: approx. 14,200 kg Terms of sale: Sale is strictly "as is" (ex works / EXW). The buyer bears all costs for disassembly, packaging, loading, and transport. Inspection on site is possible after prior arrangement.

Condition: ready for operation (used), Year of construction: 2000, clamping force: 3,000 kN, total height: 2,460 mm, overall weight: 22,500 kg, product length (max.): 7,290 mm, Hydraulic injection moulding machine manufactured in 2000. This Engel ES1800/300HL features a clamping force of 3000 kN and a maximum opening stroke of 850 mm. It offers multiple screw diameter options of 60 mm, 70 mm, and 80 mm, along with a mould installation height of 350 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES1800/300HL machine we have for sale. Contact us for further details. • Screw diameter options: 60 / 70 / 80 mm • Injection unit: ES 1800 • Stroke volume (max): 763 / 1039 / 1357 cm³ • Injection pressure (specific): 1960 / 1441 / 1105 bar • Injection pressure (specific, increased): 2360 / 1735 / 1330 bar • Opening stroke: 850 mm • Mould installation height (min): 350 mm • Max. daylight (distance between platens): 1200 mm • Mould fixing platen size (H x V): 1050 x 650 mm (standard) / 1050 x 900 mm (enlarged option) • Ejector stroke: 200 mm • Ejector force: 83 kN • Dry cycle / stroke (Euromap 6): 2.2 s / 300 mm • Oil capacity: 810 l • Pump power: 37 kW (standard) / 45 kW (N-Ausführung) • Heating power: 25.3 / 29.4 / 33.5 kW (standard) or 33.4 kW (N-Ausführung) • Number of heating zones: 5 (including nozzle) • Hopper capacity: 120 l • Control system: Microcomputer EC 100 regulated (standard) / CC 100 regulated (optional) Todpfx Afszg Enwjxoa • Standard equipment/features: 10-stage injection speed, 10-stage holding pressure profile, 5-stage screw speed, 5-stage back pressure profile, bimetallic cylinder, ceramic heating bands, energy-saving variable displacement pump hydraulics

Condition: used, functionality: unexamined, Ferwood Code: RU0010431 - Manufacturer Code: GNM 5480-B4 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Todpfxjv Iz Ias Afxea

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, machine/vehicle number: 170609, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 460 mm, displacement volume: 59 cm³, injection pressure: 2,000 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, plate width: 600 mm, plate height: 650 mm, overall weight: 3,900 kg, Equipment: documentation/manual, ENGEL e-max 100 all-electric injection molding machine including GKU linear robot – cleanroom system – pharmaceutical – top condition You can find more top-condition ENGEL machines on our website: maschinen-handel.eu For sale is an ENGEL e-max 100 (Type E-MAX 200/100) in excellent technical and visual condition. The machine comes from the cleanroom production of a well-known pharmaceutical company in Lower Saxony and was used exclusively under the highest quality standards and regularly maintained. The entire system is in exceptionally well-maintained condition. The scope of delivery includes a GKU linear robot, including a separate robot base, which means the system can be used immediately for automated production processes. Technical data of the machine Manufacturer: ENGEL Type: E-MAX 200/100 Clamping force: 1000 kN (100 t) Opening stroke: 350 mm Tsdozl Iymepfx Afxoa Tie bar spacing: 460 × 410 mm Platen size: 650 × 600 mm Tool height: 150–450 mm Max. tool weight: 650 kg Ejection stroke: 100 mm Ejection force: 25 kN Drying cycle: 1.45 s Injection unit IS 200 Screw diameter: 25 mm L/D ratio: 25 Max. injection pressure: 2,400 bar Max. injection volume: 58.9 cm³ Shot weight (PS): approx. 54 g Injection speed: 108 cm³/s Dosing capacity: 10 g/s Heating capacity: 6.95 kW Heating zones: 4 Equipment ✔ All-electric ENGEL e-max ✔ GKU linear robot ✔ Separate robot base ✔ Cleanroom machine ✔ Suitable for use in the pharmaceutical industry ✔ Regularly maintained ✔ Very well-maintained overall condition ✔ Ready for immediate use Advantages The ENGEL e-max impresses with its high precision, energy efficiency, and dynamics. It is ideally suited for the production of high-quality plastic parts, especially in the following areas: Medical technology Pharmaceuticals Packaging Electronics Precision engineering Technical plastic parts Thanks to its origin in a cleanroom production environment, the machine was operated under particularly clean and controlled conditions. Inspection An inspection under power is possible at any time by appointment. We will gladly send you additional images, videos, and technical documentation upon request. More information on our website – Your specialist for used injection molding machines We will support you from inspection to transport to commissioning. If desired, we will organize dismantling, loading, Europe-wide transport, and export handling. e-max 100 t | Cleanroom | Pharmaceutical | All-electric | Top condition

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, clamping force: 5,500 kN, screw diameter: 80 mm, total height: 2,230 mm, overall weight: 20,000 kg, product length (max.): 8,840 mm, This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. Todjx Nr H Ijpfx Afxea • Maximum injection volume: 1,960 cm³ • Minimum mould height: 310 mm • Maximum mould height: 800 mm • Platen opening stroke: 850 mm • Platen dimensions (W x L): 1,345 x 1,280 mm • Tie-bar distance (H x V): 915 x 860 mm • Motor power: 55 kW • Heater power: 47.5 kW • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Operating hours: 29,598 h • Condition: Excellent Additional equipment • Robot: Not equipped • Robot interface: None • Other accessories: None reported

Condition: new, Year of construction: 2026, power: 10 kW (13.60 HP), pressing force: 100 t, overall weight: 9,000 kg, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press capacity 100 to, Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs Todpfx Afsd Hn Tasxsa same machine available L = 2000 mm und L = 1400 mm

Condition: good (used), Year of construction: 2007, Technical Specifications General Information 1. Manufacturer: ENGEL 2. Model: DUO 7050 / 1000 3. Control Unit: CC200 4. Year of Manufacture: 2007 5. Operating Hours: 100,145 h Clamping Unit 1. Clamping Force: 10,000 kN (1,000 tons) 2. Tie Bar Distance (H × V): 1,400 × 1,150 mm 3. Platen Size (H × V): 1,850 × 1,810 mm 4. Mould Height (Min./Max.): 578 – 1,678 mm 5. Opening Stroke: 2,100 mm 6. Daylight (EBH): 1,000 mm 7. Centering (Fixed / Moving Platen): Ø250 mm Clamping Unit Equipment 1. Core Pulls: 2. Fixed Platen: 3 3. Moving Platen: 3 4. Air Valves: 5. Fixed Platen: 1 6. Moving Platen: 1 Tjdpjy Ukfmjfx Afxea 7. Magnetic Mould Clamping System: Yes Maximum Mould Weight 1. Maximum Total Mould Weight: 21,000 kg 2. Maximum Mould Weight on Moving Platen: 14,000 kg Injection Unit 1. Screw Diameter: 105 mm 2. Shot Volume: 4,160 cm³ 3. Maximum Specific Injection Pressure: 2,090 bar 4. Plasticizing Capacity (PS): 112 g/s 5. Maximum Screw Speed: 150 rpm 6. Screw Drive: Electric 7. Screw Surface: Armoured and nitrided 8. Barrel: Bimetallic M3 Nozzle 1. Nozzle Orifice Diameter: 8.0 mm 2. Nozzle Radius: R35 mm 3. Nozzle Immersion Depth: 50 mm 4. Maximum Outside Nozzle Diameter: 60 mm KUKA ROBOT 6 axes

Condition: new, Engel bimetallic screw cylinder, new and unused Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Unit 5550: 3700 cm3 Todpfsx Up U Tox Afxea

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Tjdpfx Aex Up Utsfxja Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Tsdpfx Aox Up Rnofxja Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550 Tsdpfx Afsfnqapexja

Condition: new, Engel D 2965.1/2-G27-B5.15 engine, serial number as shown in the photo, unused, 100% functional, scope of delivery as shown in the photos. Todpfxoi D Hu To Afxea

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL SPECIFICATIONS - Infeed width: 720 mm - Infeed height: 160 mm - Maximum input material thickness: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Infeed pressure feed roller motor: 0.75 kW - Lower toothed feed roller motor: 1.8 kW - Upper toothed feed roller motor: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse (with adjustable control) - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German manufacture – Very low hours – Original documentation – Used shredder, condition very good / excellent Tsdsza D T Tspfx Afxja Net price: 139,900 PLN Net price: 33,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Drive Parameter Value Pump motor power 45 kW Tjdpezb Ivhjfx Afxja Mounting plates The machine belongs to the Engel Victory 400T series. Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t.

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Todpfjzkatcjx Afxoa Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Todpfxew U Sz Is Afxja Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) Todpfx Afoyw Aa Usxea 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Tsdpfjywrtwex Afxea Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle

Condition: excellent (used), ENGEL e-cap 3440/420 T injection molding machine Basic data • Manufacturer: ENGEL • Model: e-cap 3440/420 T • Year of manufacture: 2012 • Machine type: Fully electric injection molding machine • Control system: ENGEL CC200 • Operating hours: 63,000 h • Screw diameter: 80 mm Technical data Clamping unit • Clamping force: 4,200 kN (420 tons) • Clamping mechanism: Kneel-type, fully electric • Opening stroke: 700 mm • Minimum mold height: 350 mm • Maximum mold height: 750 mm Tedpfxszlgi Hj Afxoa • Mounting plate dimensions: 1350 × 1350 mm • Column spacing: 920 × 920 mm • Ejector stroke: 220 mm • Ejector force: 120 kN • Maximum mold weight: 6200 kg Injection unit • Unit size: 3440 • Screw diameter: 80 mm • Injection volume: 1709 cm³ • Maximum injection pressure: 1950 bar • Number of heating zones: 6 Equipment • ENGEL CC200 control system • Fully electric drives for all axes • Energy-efficient ENGEL e-cap technology • Very high precision and process repeatability • Suitable for continuous 24/7 operation Machine history The machine has been used since new for the production of plastic buckets. It has never been used for the production of PET caps, although the e-cap series was designed specifically for this type of application. The average cycle time was approximately 15 seconds. As a result, the clamping unit has performed significantly fewer operating cycles than typical e-cap machines used for cap production, where the cycle time is usually below 2–4 seconds. This potentially indicates lower mechanical wear compared to machines operated according to their original intended purpose.