Used Emag Vertical Multi-Spindle Lathe for sale (22,095)

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Isdpov D Ip Njfx Amisib Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled Iedpfx Amjhy Tdyoieib newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed Iiedpopz Hubofx Amieb - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen -

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD Iodpfjg Hkmrox Amijib - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Iedpemgaddsfx Amieib Center height: 180 mm Center width: 1000 mm Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: new, Precision lead and feed screw lathe Manufacturer: GDW Model: LZ 330 V economyline Iiedpfx Aew S E Ddsmiob Condition: New machine with stepless speed control according to the highest safety standards Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm Standard equipment includes: - 3-axis digital readout, 6" colour display - LED machine light, integrated into machine enclosure - Electromechanical limit switch device for threading and feed operation - Quick-change toolpost, size A, with turning toolholder - Main drive brake system (spindle brake) - Sliding chuck guard with limit switch monitoring - Removable rear chip guard - Sliding splash guard - Pull-out chip tray - Simple bed stop (longitudinal fixed stop) - Central lubrication - Set of change gears (tooth counts: 21-27-28-33-42-120) - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle nose DIN 55027-5 - Additional service socket - 2 fixed centre points DIN 806-MK 3 - Set of operating tools, keys, and oil gun - Replacement shear pins - Operating manual with spare parts list and electrical documentation

Condition: good (used), Year of construction: 1983, Faceplate diameter: 1250 mm Max. turning diameter: 1400 mm Max. turning height: 1180 mm Max. ram stroke, vertical: 750 mm Table load capacity: 5,000 kg Faceplate speed range: 4 - 210 rpm Vertical slide swivel adjustment: 45° Feed range: 0.044-8 mm/rev Rapid traverse: 2 m/min Machine dimensions (L x W x H): approx. 2715 x 2665 x 3950 mm Iiodpfx Aey Ex Epemisb Total weight: approx. 16,500 kg Accessories / Special features: • 2-axis digital display, make ACU-Rite • Faceplate Ø 1250 mm with 4 jaw chucks • 5-position turret head Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1991, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 1991 Control : Siemens 840 Dsl Turning diam. : 1600 mm Turning length : 1800 mm In General: Year of manufacture:1991 / 2010 Control system retrofit:2010 Control system:Siemens 840 Dsl Iijdpfx Asy R Iwxomiob Circumferential diameter:2,000 mm Turning diameter:1,600 mm Turning height:1,800 mm Table / Faceplate: Technology:Gear-driven table Speed:315 rpm Power:105 kW Max. torque:50,000 Nm Faceplate:1,600 mm Max. table load:12,000 kg Tool carrier: Crossbeam travel (vertical):1,200 mm Chisel slide travel:1,500 mm Support travel (horizontal):2,300 (+/-1,150) mm Penetration diameter:340 mm Chisel slide cross-section:240 x 240 mm Equipment: Tool magazine:20 stations Chip removal:Chip conveyor Coolant supply:Coolant system with filter Tool measurement:Probe Set-up:Electronic handwheel Tool holders:Various tool holders Control system overhaul: Year of overhauling:2010 Technology:Siemens 840 Dsl NC control:Sinumerik NCU 710.2 Motors:X/Z-axis, ATC, :spindle Measuring systems:Direct scales X/Z, ROD encoder table Control panels:Machine control panel, ATC operator panel

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. Iedpfeywtxbjx Amieib This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, faceplate diameter 1400 mm swing diameter 1600 mm turning height 1200 mm turning speed range - milling 1 - 240 U/min Control Siemens SIN 820T ram head - cross travel 1000 mm total power requirement 55 kW A.T.C. 12 positions Iodpfxeyuqdzj Amioib Tooling

Condition: excellent (used), Faceplate: 2500 mm Max. turning diameter: 2800 mm Max. turning height under tool edge: 1500 mm Spindle speed: 110 rpm Workpiece weight: 10 tons Digital readout Jaw boxes Iodoy D Tw Djpfx Amieib

Condition: excellent (used), Year of construction: 1988, operating hours: 9,807 h, functionality: fully functional, machine/vehicle number: 17483, NOTTMEYER KOMET SUPER S/PN Iiodpfx Amjx Af D Roiob - very well maintained - fully functional - available immediately

Condition: used, Model: WMW NILES DKZ4000 Vertical Turret Lathe (VTL) Faceplate Diameter: 3,500 mm Ijdpfx Ajy Ivwbemisib Max. Turning Diameter: 4,000 mm Max. Turning Height: 2,000 mm Side Head Vertical Travel: 1,700 mm Side Head Horizontal Travel: 1,000 mm Origin: Germany (WMW NILES)

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm Isdpfx Aeytn Emomioib HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital measuring device Centre height: 150 mm Swing over bed: 300 mm Turning diameter in the gap with face plate: 405 mm Distance between centres: 1000 mm 3-jaw chuck, with chip guard Iiedpfxjx Eah Ao Amieb Multiflex toolholder Spindle speeds: 33 - 2000 rpm Chip tray Tailstock quill diameter: 45 mm, quill travel: 100 mm Taper: MK 3 Machine dimensions: 2500 x 800 mm Weight: 1180 kg Operating manual

Condition: used, Year of construction: 2001, faceplate diameter 850 mm swing diameter 1200 mm turning height 1000 mm Control Siemens Iodpoy Swhiofx Amioib type 840 D Tool changer 36 Pos. x-travel 870 mm z-travel 1020 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, faceplate diameter 2500 mm swing diameter 2700 mm turning height 1600 mm turning speed range - milling 1,18 - 32,5 U/min turning speed range - milling 4,25 - 117 U/min workpiece weight 10000 kg side head - cross travel 800 mm Iiedpeyuqidsfx Amisb ram head - cross travel 45 degrees - 1000 mm ram head - cross travel 30 degrees - 1000 mm total power requirement 80 kW 2-Axis D.R.O. 5 positions turret

Condition: good (used), Year of construction: 2006, machine/vehicle number: 66078, TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm Iisdpfx Aowfdddemieb X-axis travel: 626 mm Z-axis travel: 250 mm Spindle bearing diameter: 32 mm Nominal speed: 1,200 rpm X-axis rapid traverse speed: 60 m/min Z-axis rapid traverse speed: 30 m/min Turret positions: 12 MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - WPS pallet conveyor - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 991217, total height: 1,600 mm, total width: 2,300 mm, total length: 2,200 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 120 mm, feed length Z-axis: 40 mm, drilling depth: 40 mm, spindle speed (max.): 2,800 rpm, rotational speed (max.): 2,800 rpm, collet bore: 13 mm, power: 15 kW (20.39 HP), drilling capacity: 35 mm, number of spindles: 2, workpiece height (max.): 40 mm, We offer this used COMEC multi-spindle drilling machine FFR 2+2 1200 + CA, year of manufacture 1999. Brand: COMEC di Bergamasco L. & C. snc Model: FFR 2+2 1200 + CA Type: Milling/Drilling Machine Serial Number: 991217 Year of manufacture: 1999 Additional information: COMEC twin-column drilling machine for wood Machine dimensions: 2200 x 2300 x 1600 mm Power: 15 kW Voltage and frequency: 380V and 50Hz Spindle speed: 2800 RPM Chuck: from 0 to 13 mm Drill diameter: 35 mm Supply: electric and pneumatic Drilling capacity: - Length: 100 to 1500 mm Isdpfxoy Idzhe Amioib - Width: 15 to 120 mm - Thickness: 15 to 40 mm If you have any questions or need more information, please don't hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB Iedex Irzvjpfx Amioib parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor

Condition: used, Year of construction: 2009, faceplate diameter 1800 mm swing diameter 2000 mm turning height 1500 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min power capacity - table 100 kW Torque 31784 Nm total connected load 218 kW weight of the machine ca. 55 t Turning- and Boring heads: - 4 x Turning heads + steelholders - 3 x Turning heads for Capto - 1 x Boring head (driven) - 2 x angular boring heads (Manufacturer Benz) Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW Isdpfovyliljx Amisib - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coolant system filter system 1500 l Chain tool magazine with 80 places: - max. tool weight 30 kg - Max. tool diameter with free auxiliary slots 250 mm Disk magazine with 12 slots: - max. weight of tool holders/accessory units 150 kg - max. length of tool holders 500 mm - max. magazine load 1000 kg Pallet changer with 2 pallets: - Pallet diameter 1800 mm - Pallet load capacity (centered) 5000 kg - Pallet load capacity (on center) 4000 kg Equipment / accessories: - 1x pallet with claw boxes, diameter 1800 mm - 1x hydraulic chuck with base jaws, diameter 1800 mm - Various drilling and milling heads - Various turning tool holders - 2x measuring probes

Condition: used, Year of construction: 2003, Mazak Integrex E-410H Multi-Tasking Lathe with Mazatrol 640M Pro Control, Serial No. 164385 (2003). Country of Origin: Japan Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Iodpfex T Df Dsx Amieib Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 270144, MS22C including bar feeder Cucchi PB24/3300 Knoll lubrication system VRF 500 with chip conveyor Kraft und Bauer fire extinguishing system The machine has 11 cross slides and a synchronous spindle. Included are: 5 turning holders 1 double holder Iijdoy Sxm Hspfx Amiob 2 tailstocks with collet chucks Bar feeder parts for Ø20 The machine can be inspected while powered on. The operating hours are not accurate. They realistically correspond to approximately 10.5 years of operation in a 3-shift system. We need to free up the space, so we would like to sell the machine as quickly as possible.

Condition: used, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg Iiodpfx Aoyabc Ejmisb

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm Ijdpfxev Hzqxo Amisib - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder