Used Efi Reggiani Terra Silver Pigment Ink for sale (2,450)

Condition: good (used), Year of construction: 1987, functionality: limited functionality, machine/vehicle number: 63526, overall weight: 1,200 kg, operating temperature: 220 °C, year of last overhaul: 2022, For sale: Pfaudler Balfour filtration Nutsche, volume 300 L. Glass-lined reactor, jacketed, in working condition. Sales price 24,000 Euro, ex works. Can be inspected onsite in Zofingen, Switzerland. Hedpfoy Igzkex Ampel

Condition: used, maximum load weight: 31,710 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2016, total width: 2,550 mm, Equipment: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment features. Complete specification available on request. - Wedge-shaped chassis with increased point load capacity, approx. 25,000 kg over approx. 5,000 mm - 24,000 kg telescopic support winches with load and fast operation modes - Lashing positions available in 5,000 kg, 6,000 kg, and 10,000 kg configurations - 8 stake pocket inserts (for 2nd bulkhead) - Aluminum roof girders with sliding tarpaulin - Rear stakes extendable to approx. 3,500 mm (for loading and unloading only) - Three sliding stanchions on each side - End stanchions extendable lengthwise in direction of travel - Complete front wall designed as storage compartment with integrated shelving system, interior closed - DINKEL mechanical lifting roof, height-adjustable, lifting roof height 400 mm, operable from both sides or one side only - Additional height adjustment of 480 mm in 40 mm increments (12 x 40 mm) via stanchion height setting - Trailer can be driven under tarpaulin up to total height of approx. 4,400 mm (rear open over tail lift) - Upper rear portal crossbar with movable sliding tarpaulin - Four rows of stackable 150 mm aluminum slats on each side (two rows in upper bunk only), 450 mm pockets at bottom, four rows of pockets above, evenly spaced intervals Hedey Dy Ehopfx Ampol - WABCO compressed air brake system with EBS to EC Standard 71/320 EEC incl. PREV - ECAS air suspension with raise/lower function - Wabco Smart Board with axle load display and hubodometer - 3 x 10,000 kg SAF axles with drum brakes - 3rd axle: friction-steered trailing axle - 1st axle liftable - Tires: 235/75 R 17.5 - Dhollandia heavy-duty tail lift, type DHLSU, load capacity 9,000 kg, load center 1,000 mm, steel platform approx. 3,000 x 2,500 mm - Hydraulic auxiliary stabilizers with automatic ground leveling - Tail lift with ramp function for inclined platform setup, usable as loading ramp – loadable up to max. 13,500 kg - Chassis painted in MB nova grey - White bodywork with customer-specific tarpaulin lettering

Year of construction: 2017, condition: excellent (used), functionality: fully functional, We are offering this very well-maintained bulk material silo, including currently calibrated/certifiable weighing technology, year of construction 2017. This is a GRP (glass-fiber reinforced plastic) bulk silo (50 cbm) with certified weighing technology. Equipped with premium brand components (Reich Silo, Siemens Siwarex). The silo is drivable underneath and is currently used as a pellet filling station. Features: - GRP silo with 50 cbm capacity - Substructure with 3.0 m clearance height - Weighing system (weighing container, rotary valve, etc.) => dispensing possible down to 20 kg as the smallest delivered quantity - Loading unit/hose (can be fitted with bag attachment), height adjustable via manual winch Hjdpfxjy Ey Sqe Ampjl - Control system (switch cabinet, EC card device/reader, receipt printer, data transmission, remote maintenance) Comprehensive documentation is available (structural calculations, foundation plans, etc.). Manufacturer: IFA (system integrator) Year of manufacture: 2017 Condition: very good Category ID: 399 Type: Bulk silo with certified weighing technology Location(s): Upon request (company address provided is not the silo location) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,250 mm, total width: 970 mm, total height: 1,900 mm, Model: Wachtel Piccolo 1-4 Electric deck oven for 4 trays 600x800mm Manual control Simple technology Bottom shelf Connection: 400V, 16A CEE plug Dimensions: 970 x 1250 x 1900 mm (W x D x H) Oven is mobile with lockable castors Hjdpfx Amsxxgnpopol Used oven Option: Water filter Baking trays Delivery service We have many more ovens in stock!

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has domed hood/lid with clamps. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Hodpfx Ajykn Tfsmpol

Condition: used, Kompleksowo przetestowany, używany mieszalnik lemieszowy produkcji Winkworth (Anglia) model RT400 wykonany ze stali kwasoodpornej AISI 316. Materiał: stal kwasoodpornej AISI 316 Pojemność robocza: 400 litrów (w zależności od produktu) Wymiary komory mieszającej: długość 1300 mm x średnica 800 mm Typ rozładunku: zawór klapowy pneumatyczny, umieszczony centralnie na spodzie Mieszadło: szybkoobrotowy wał z przyspawanymi łopatami w kształcie "T" Silnik: napęd produkcji SEW z silnikiem elektrycznym o mocy 22 kW Dodatkowe wyposażenie: - 1 boczne mieszadło intensywne (chopper - Refiner) napędzane bezpośrednio silnikiem elektrycznym o mocy 7,5 kW, możliwość podłączenia drugiego mieszadła Poniżej dostępny jest link do filmu ukazujący mieszalnik podczas testowego uruchomienia: Specifications: Bowl Volume: 105.7 gal Hedpfx Asykn Shsmpel Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Year of construction: 2003, condition: used, Winkworth PV35 steam jacketed vessel 2003, stainless 35L steam jacketed vessel, stainless lid, central bottom discharge, max design temp 200'C, max design pressure 6bar Hodpodmn Tvsfx Ampjl

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-component 12.3 million cycles 86,565 hours manual operation 78,099 hours automatic operation Injection unit 1 horizontal 290, diameter 25, max. 71 cm³ Injection unit 2 vertical 70, diameter 18, max. 21 cm³ Opening stroke 925 mm Electric index rotation 12-zone hot runner integrated 3x core pull 2x air blow (control for needle shut-off) Various customer inputs and outputs Interfaces: ALS Temperature control units Dryers Multilift H 6kg: 2x vacuum 5x double-acting grippers Z-axis servo 800mm C, G, X, and B-axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) Important Notice!!! Current update – Tax note and benefit for used machinery Hedpfx Asxzix Asmpsl From 01.07.2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Section 2 EStG-E)

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component 78,099 hours, automatic Injection Unit 1: horizontal, 290mm, diameter 25mm, max. 71 cm³ Injection Unit 2: vertical, 70mm, diameter 18mm, max. 21 cm³ Opening stroke: 925 mm Electric table indexing 12-zone integrated hot runner 3x core pulls 2x air blow (control for needle shut-off) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6kg: - 2x vacuum - 5x double-acting grip - Z-axis servo 800mm - C, G, X, and B axis pneumatic - Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we offer a commissioning guarantee for every machine purchased from us, meaning the machine will be started up by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Note!!! Current legal update – Tax advantage for used machinery Effective from 01.07.2025, used machines can also be subject to an annual special depreciation of 30%. In addition to the lower price compared to a new machine, you can benefit from the same depreciation allowances as with a new machine. Hsdpfx Amox A Dy Ropjl Keyword: growth booster (§ 7 Paragraph 2 EStG-E)

Condition: like new (used), Proofing delay cabinet / proofing machine Debag Tefi 400B for up to 20 trays 600 x 400 mm, fully assembled, standard unit, top-mounted. Temperature range from -10° to +40°C, maximum air humidity up to 90% for optimal dough conditioning. Computer control. Interior and exterior walls made of stainless steel. Connection: 230V, 1.2 kW, ready to plug in. DGUV V3 certified. Dimensions: 792 x 715 x 2120 mm (W x D x H). Used equipment, year of manufacture: 2018. Invoice with VAT shown. Hsdpfx Amsyy Iwdopsl

Condition: used, Winkworth PV1000 Jacketed Stainless Steel Tank Capacity 1000 Lts Hodpfx Amowq Sdiepsl Complete with Winkworth mixer and ancillary equipment

Condition: used, Winkworth PV500 Mixing Tank with Load Cell Weighing Hedpfxowq Sn Ue Ampel Capacity 500 LTS Stainless Steel Jacketed Load weighing Cells With Ancillary Equipment

Condition: used, Winkworth Jacketed Stainless Steel Mixer Tank Capacity 1000 LTS Jacketed Stainless Steel Hodpfx Amowq Sw Nopsl With ancillary equipment

Year of construction: 2012, condition: good (used), Shrink packaging FL5545TB L sealer and shrink tunnel Hodpfxspm D T Ue Ampel Serial: 872 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. Hjdpfsy D Rk Ijx Ampol New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox PrimeLink C9070’ Object of sale: 1 x Xerox PrimeLink C9070 with the following equipment: incl. Fiery Server EX C9065 incl. Paperdeck A-CF01 incl. booklet finisher A-FN13 Hjdpfx Ajvtycyompol incl. SquareFold with front trim incl. Vivid kit for changing. Colours: White, gold, silver, transparent incl. fluorescent kit for changing colours. Colours: fluorescent cyan, magenta, yellow Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,189,345 pages Colour: Approx. 1,049,230 pages Black: Approx. 140,115 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Canon imagePRESS C9010 VP’ Object of sale: 1 x Canon imagePRESS C9010 VP with the following equipment: incl. Prisma Controller or Fiery incl. booklet finisher N2 incl. High Capacity Stacker H-1 incl. POD Deck D1 Counter readings: Total: Approx. 1,880,920 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Hodpju Ecl Eofx Ampel A function test will be recorded on video for you before dispatch or collection. For further information you can of course also contact us personally.

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: 0.75 L GDB bottle (height approx. 295 mm) Crate formats: 12-bottle Pool N2 crate (400 × 266 × 333 mm) 12-bottle individual crate (395 × 295 × 355 mm) Crate transport: Cross-flow crate transport Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: Length: 2,700 mm Width: 1,400 mm Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: Danfoss frequency converter Standard electrical configuration Additional equipment: Cap transport system Blower unit Technical documentation available Condition: Used Availability: On request Hsdpfjytphcox Ampsl

Condition: excellent (used), For sale: professional defibrillator/monitor LIFEPAK 15, a highly regarded model from Physio-Control / Stryker, year of manufacture: 2017. The device powers on fully – the display, menu, and rhythm monitoring functions work correctly (as shown in the photos). Equipment and features: • LIFEPAK 15 monitor/defibrillator – REF 99577-001390 • Serial number: 45974928 • Year of manufacture: 2017 • Two LP15 MPB batteries • Integrated thermal printer • Modules: ECG, SpO₂, NIBP, CO₂ (ports visible in the photos) • Manual and AED modes • Large color display • Original side and top carrying bags Condition: Used equipment, in good technical condition. Typical signs of use on the housing, no mechanical damage. The device starts up and enters operation mode – see photos for demonstration. Ideal for: • Medical facilities • Emergency rescue services Hodpfx Amoxy S I Ropol • Medical event coverage • Training and educational medical applications Viewing and testing on site possible. Courier shipping or personal pickup available.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, number of ink cartridges: 5, color channels: 5, number of print heads: 5, resolution (max.): 1,200 dpi, total length: 305 mm, total width: 114 mm, total height: 114 mm, space requirement length: 23,100 mm, space requirement width: 6,400 mm, space requirement height: 16,800 mm, year of last overhaul: 2024, type of input current: three-phase, input voltage: 230 V, Equipment: auto duplex, brochure finisher, raster image processor, The Helix® Digital Cylindrical Printer is designed to print high quality full colour images (CMYKWW + varnish) on straight and conical cylinders. Fast and flexible, this cylinder printing machine is ideal for use in the beverage, barware, candle and industrial printing industries. The Helix® UV Cylindrical Printer achieves the perfect balance between speed and image quality with patented Helix® software that places 7 picolitre ink drops precisely along the cylinder at extremely high speeds. This rugged, state-of-the-art machine is designed and built in the USA. The Helix® has a wide frame, allowing easy access and maintenance of the machine. It also has a backlit interior for even greater ease of service. The machine has been additionally equipped with an additional 80mm UV lamp, which has increased the print height to 190mm. We have successfully printed on metal thermoses, glass and plastic bottles. CMYKWVV ink configuration. Hjdpfx Aovncilempsl The condition of the machine is very good, both visually and technically. The machine is still in constant use. It is possible to see and present the machine.

Condition: used, Year of construction: 1992, turning diameter 220 mm turning length 250 mm control SIEMENS SINUMERIK 820 T swing diameter 380 mm chucking diameter 250 mm x-travel 200 mm z-travel 250 mm spindle turning speed range bis 4000 U/min rapid travel - longitudinal/face 15 m/min total power requirement 27,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant Hsdpfx Ajvh Ivqjmpsl

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine was extensively overhauled for €7000. Proof available. Working processes: - 60° chamfering - longitudinal turning up to maximum 40 mm - Center drilling Work process fully automatic: - Clamping, chuck closed - rapid traverse forward - Work feed - Dwell time for cutting out - Rapid traverse back - Unclamp, chuck open Technical data: Hodpfx Aeiamn Ssmpol max. workpiece diameter round 80 mm max. workpiece diameter hex-SW 70 mm min. workpiece diameter round and hex 10 mm min. Workpiece length 450 mm Speed range stepless Stage I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1,3/1,8 Motor power coolant motor kW 0,07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: used, maximum load weight: 14,420 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2017, next inspection (TÜV): 05/2028, Year of construction: 2017, Internal vehicle number: G200117 German vehicle On our yard in Kaufungen - Kassel, available immediately More information at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English)   2 axles Total permissible weight 18,000 kg Empty weight 3,490 kg     Subject to errors   We are happy to accept your used vehicle as payment. Hsdpfou D U U Aox Ampsl Financing is possible directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: good (used), Year of construction: 2010, functionality: fully functional, total length: 5,600 mm, vertical wasching and drying machine Hsdpfxjx Hv Dre Ampjl workong direction : from right to left working height : 1600 mm open top number of brushes : 4 glass thikness : 3 - 12 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 2,154 h, machine/vehicle number: WKY3S0639MM043215, For sale: Transmix for producing anhydrite screeds, also capable of processing lightweight (styro) concrete. Year of manufacture: 2021, first registration in January 2022, 2,154 operating hours. The machine is in very good condition. Hsdpfx Amexg I Tiepol