Used Dycometal Climate Chamber Cck -40/1500 T (1,500 Litres) Year Of Manufacture: 2022 for sale (106,006)

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   Hsdpozizmbefx Abkjnu (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Year of construction: 2002, condition: good (used), Vötsch VTSR 7034/S Climate Testing Chamber, -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber volume: 335 liters Climate testing chamber Temperature range: -70 to +180°C Supply voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated current: 22 A Rated power: 12.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Hnjdjuuif Nepfx Abkeu Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Year of manufacture: 2002 TK-11 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, CTS   Type: CS-70/600-5/S   CTS climate testing chamber CS-70/600-5/S water-cooled version with observation window, test specimen protection and documentation   For sale is a high-quality CTS climate testing chamber, type CS-70/600-5/S for precise temperature, climate and stress screening tests in research, development, quality assurance and industry.   The device is in used condition and can be viewed in its entirety according to the images. Current display: Manual operation / Warning (sludge removal of the water bath).   Operating hours according to the display: Total operating hours: 19,788 hours Compressor cooling: 8,699 hours Compressor pre-cooling: 11,432 hours Circulation pump: 2,905 hours   Technical data:   Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate heating: approx. 11.95 K/min Temperature change rate cooling: approx. 5.47 K/min Test chamber volume: 600 liters   Electrical connection: 400 V 3/N 50 Hz Rated power: 18.4 kW Rated current: 30.6 A Protection class: IP 22   Refrigerant: R404A / R23 Pre-cooling stage: R404A – 5.0 kg Cooling stage: R23 – 2.1 kg / 14.5 bar CO2 equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800   Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar   Equipment / features:   Observation window in the door Stainless steel test chamber CTS touch panel / LCD control panel digital control with program operation Test specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath automatic water replenishment possible Interfaces (RS232 / Ethernet possible according to documentation) integrated control cabinet Industrial version   Pipe penetrations according to installation plan: 1x penetration DN 50 2x penetration DN 125   Hjdpfx Aey H Hmwobksnu Test chamber dimensions according to installation plan: approx. 850 x 850 x 830 mm   External dimensions according to installation plan: approx. 1900 x 1120 x 1875 mm   Weight / mass according to documentation: approx. 750 kg   Scope of supply:   CTS climate testing chamber CS-70/600-5/S including existing documentation / test certificates Scope of supply as shown in the pictures   For your safety as a buyer: The device can be inspected by appointment. Loading with a forklift can be arranged.   For your safety as a buyer, please note the following information!   The following points can be carried out in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   (Subject to changes and errors in technical data!)   We will be happy to answer any further questions by telephone or message.

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Hedpfxjz Akcfj Abkenu Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate test chamber / Temperature test chamber Vötsch VC³ 0034 Climate test chamber Temperature and climate test chamber, air-cooled For sale is a used climate test chamber from the manufacturer Vötsch Industrietechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Equipment type: Climate test chamber / Temperature test chamber Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Weight: approx. 490 kg Temperature range: -10 °C to +90 °C Temperature change rate, heating: approx. 1 K/min Temperature change rate, cooling: approx. 0.3 K/min Max. heat compensation: approx. 200 W Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1 K Climate range, temperature: +10 °C to +90 °C Dew point range: +4 °C to +89.5 °C Humidity range: 10 to 98 % RH Refrigerant: R404A Refrigerant quantity: 0.6 kg Hsdpfx Ajzgb Awobkonu ND max.: 25 bar g HD max.: 25 bar g Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.3 kW Rated current: 10 A Water tank: 20 liters Protection class: IP54 Noise level: approx. 46 dB(A) Equipment SIMPAC control Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface RS232 interface RS485 / RS422 interface Test specimen protection function Cable glands Documentation / Operating manual Accessories according to images Areas of application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x Vötsch VC³ 0034 Climate test chamber Documentation / Operating manual Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Hnsdpfxozd Axbs Abkou Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Hjdpfx Abezd Az Askonu Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2025, machine/vehicle number: 211-11-07-25-10, total width: 1,070 mm, total length: 2,500 mm, total height: 2,050 mm, This E-bike motor test bench, type G5, manufactured in 2025 by EMEC Prototyping GmbH, will be auctioned off in our online auction "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, and accessories." Further details: E-bike motor test bench EMEC G5, manufactured in 2025 Test bench for e-bike drives with two test levels (Rack 1 and Rack 2) in an aluminum profile enclosure with safety doors, including an attached control cabinet. According to the nameplate: Manufacturer: EMEC Prototyping GmbH Type: Motor test bench G5 Year of manufacture: 2025 Hnjdpfx Abez Nd N Dsksu Electrical power: max. 16.6 kW Electrical connection: 3Ph~ 400 V / 32 A Dimensions (L x W x H): 2500 x 1070 x 2050 mm Weight: 1150 kg, permissible total weight: 1300 kg As far as can be seen, the following components are installed (information without guarantee): Both test levels appear to be equipped identically, per level: Beckhoff servo motor AM8064-0R1A-0000 (11.5 kW, 49.7 Nm, 3000 rpm) with gearbox and Beckhoff Air Cooling Kit AX2090 Beckhoff servo motor AM8053-0J1A-0000 (3.12 kW, 15.4 Nm, 2000 rpm) with gearbox and fan unit 2 torque measuring shafts Test specimen mount with protective bracket on a slide Linear guides with clamping levers for axial adjustment Fan for test specimen cooling Thermocouple connections (Type K) Connections for CAN, service, fan, and auxiliary voltage (AUX) Additionally: Laboratory power supply EA PS 10080-120 (0 to 80 V, 0 to 120 A) Control cabinet (as far as can be seen): Emergency stop, main switch, on/off button, CAN connection per rack, front connections 2x USB, DisplayPort, and RJ45 Forklift pockets, rollers, and adjustable feet All information without guarantee. The technical specifications were determined based on nameplates and visual inspection. The actual condition as inspected is the decisive factor. Functionality has not been tested. Software and operating computer are not part of the lot unless expressly stated.

Condition: used, Vötsch Temperature testing chamber / Temperature chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C With viewing window For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature testing, environmental simulation, material testing, quality assurance, Hnodoz R Rgyspfx Abksu electronics and component testing as well as development, aging and stress tests. The unit features digital temperature control, a viewing window, a test chamber made of stainless steel and a side access port for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Equipment type: Temperature testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 4.36 K/min Temperature change rate, cooling: approx. 2.6 K/min Heater renewed Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Permissible operating overpressure: 25 bar Standing pressure: 11.5 bar Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A Weight: approx. 140 kg net Equipment: Digital temperature control Temperature regulation Air-cooled design Test chamber made of stainless steel Viewing window Side access port for test specimens Front main switch RS232 interface Connections for external control Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Workshop tested with documented functional test Scope of supply: 1x Vötsch VT 7004 temperature testing chamber Design with viewing window Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Year of construction: 2011, condition: used, Rated current: 95A, connected load: 53kW, an on-site inspection is possible. Hedez S Ivaopfx Abkenu

Condition: used, Vötsch Temperature testing chamber / Climate testing chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system features a programmable controller, a stainless steel test chamber, air cooling, and a side access for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Device type: Temperature testing chamber / Climate testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 5.44 K/min Temperature change rate, cooling: approx. 4.81 K/min Hnjdpfx Aoz R Nrzobksu Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Standing pressure: 15 bar Permissible operating overpressure: 25 bar Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A External dimensions according to manufacturer's drawing (W × D × H): approx. 950 × 830 × 757 mm Weight: approx. 150 kg Test specimen access: approx. Ø 80 mm Equipment: Programmable controller Temperature control Air-cooled design Stainless steel test chamber Side access for test specimens RS232 interface RS485/RS422 interface Digital I/O Potential-free contact Program operation and manual operation Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Aging and stress tests Condition: Used Optical condition as shown in the pictures With signs of wear and tear due to age and use Scope of delivery: 1x Vötsch VT 7004 temperature testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2016, Apollo spiral conveyor, infeed at approx. 6.42m / outfeed at approx. 1.09m, approx. 40cm wide conveying path – used –: Price ex location (net): only €5,950 – dismantled, packed and loaded! Hnedpfx Ajyhxp Aobkeu Manufacturer: Apollo Model: SPC 1500-400-A4-6T Year of manufacture: 2016 Belt width: approx. 40cm Infeed height (top): approx. 6.42m Outfeed height (bottom): approx. 1.09m Spiral diameter: approx. 2m Kettenlänge (chain length): 37.5m Serial no.: 562044-100 230/400V / 50 Hz, 2.2 kW Speed (min): 40m/min IP54 Load capacity: 6.4kg/m Condition: good – very good Availability: immediately Location: Warehouse Frankenberg / Saxony

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Hnsdpfx Abowzkyweksu Technical data: • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.

Condition: good (used), Heraeus Vötsch HC 4055 Temperature Testing Chamber Manufacturer: Heraeus Vötsch Type: HC 44055 Temperature chamber Hodjuuilvepfx Abkonu Temperature range: +180°C Rated voltage: 380V, +/-10%, 3/N, 50Hz Rated current: 13.5 A Rated power: 9 kW Housing dimensions: W 1065 x D 1560 x H 1890 (mm) Observation window: Width x Height 350 x 640 mm Test chamber: (L x D x H) approx. 800 x 795 x 855 mm Test chamber volume: 550 l Chamber is air-cooled Caution: Chamber can only be operated as an oven. Refrigeration circuit is empty and deactivated. Climate control system is deactivated. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan 15K6 Panel heater Semiconductor relay 21V4 Humidifier. Weight approx. 550 kg You can find more new and used items in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 5,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 710 mm, spindle motor power: 43,000 W, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 was manufactured in 1998 and retrofitted in 2022. It features a maximum nominal turning diameter of 270 mm and a turning length of 710 mm. The machine has a maximum spindle speed of 5,000 RPM and a robust tool system with 12 positions. If you are looking to get high-quality turning capabilities, consider the Index G300 horizontal turning machine we have for sale. Contact us for further details. - RETROFIT IN 2022- Max. Nominal Turning Diameter: 270 mm- Turning Length: 710 mm- Max. Swing Diameter: 590 mm- Machine Weight: approx. 6,550 kg (Cabinet weight: 710 kg)- Floor Space: approx. 8/10 m²- Spindle Collet Clearance: 65 mm- Spindle Diameter in Front Bearing: 110 mm- Spindle Nose: ISO 702/1 Size 6- Max. Torque (100%): 275 Nm- Tailstock: Electrically movable- Distance Between Centers: 740 mm- Max. Pressing Force (electric): 10,000 N- Compound Slide 1 XYZ (top) Travel (X-axis): 215 mm- Compound Slide 1 XYZ (top) Travel (Y-axis): 180 mm- Compound Slide 1 XYZ (top) Travel (Z-axis): 710 / 1,250 mm- Feed Force (X-axis): 8,000 N- Feed Force (Y-axis): 16,000 N- Feed Force (Z-axis): 13,000 N- Rapid Traverse Speed (X-axis): 20 m/min- Rapid Traverse Speed (Y-axis): 7.5 m/min- Rapid Traverse Speed (Z-axis): 20 m/min- Axis Resolution (X-axis): 0.0005 mm- Axis Resolution (Y-axis): 0.0005 mm- Axis Resolution (Z-axis): 0.001 mm- Number of Tools: 12- Tool System: DIN 69880 (Ø30x55 mm)- Complete documentation available Hnodpfxszzq E Ds Abkju Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climate testing chamber -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R 404A used climate chamber Microprocessor-controlled control and monitoring system SIMCON/32 Hodpfxeph U Ayj Abkjnu 32-bit technology Graphical display of setpoint and actual values Digital display of setpoint and actual values for temperature and relative humidity (%) Digital input for temperature (°C) and relative humidity (%) Integrated programmer Program memory Manual and automatic operation Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 climate chamber Weiss Dimensions of the test chamber: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm You can find more climate chamber items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Memmert Type: CTC 256 Memmert CTC 256 Climate Testing Chamber Temperature and Humidity Testing Chamber Hodpfey D Ni Aox Abksnu Industrial Quality For sale is a high-quality climate testing chamber / temperature testing chamber from the manufacturer Memmert, type CTC 256. The unit comes from professional use and is ideal for laboratories, industry, research, development, and quality assurance. The Memmert CTC 256 is used for the precise simulation of temperature and climate conditions. It enables both cooling and heating processes, and – in this version – the control of humidity. This makes the unit perfect for material testing, aging tests, climate stress tests, and long-term tests under defined environmental conditions. Thanks to the integrated control system, complex test programs with temperature and time profiles can be set. The forced-air circulation system ensures a uniform temperature distribution in the interior. Measurement data can be documented and further processed externally via existing interfaces. Equipment: Temperature and climate testing chamber (heating & cooling) Humidity control Electronic control with program function Forced-air circulation system for uniform temperature distribution Internal data logger USB and Ethernet interface Additional socket 230 V Cable entry (side) Water tank system (humidification/condensate) Mobile on castors Technical data: Manufacturer: Memmert Type: CTC 256 Device type: Climate testing chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (See picture) Memmert CTC 256 climate testing chamber Insert grid Water canister Documents Delivery as shown in the picture (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2000, Cieffe FNCm 2.5/0.8/1500 Hardening Furnace, Chamber Furnace, 1120 °C Manufacturer: Cieffe Type: FNCm 2.5/0.8/1500 Maximum Temperature: 1120 °C Series: 4185/1B Rated Current: 70A 37 kVA 400 Volts Year of Manufacture: 2000 Hjdpfx Absnucguokjnu Dimensions: External (L x W x H) 3000 x 1480 x 1750 mm Combustion Chamber (L x W x H) 2600 x 270 x 100 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace, Type 003.05 Manufacturer: Glasbeek Finish Type: Gas Chamber Furnace Heating / Medium: Natural Gas Type 003.05 With loading trolley Maximum temperature: 200 °C Burner type / Forced-air burner Manufacturer: Dreizler Type: M 06.2-95 Type: Forced-air burner Modulating operation Burner output: 40-110 kW Gas family: Natural gas Category: 12L Connection pressure: max. 100 mbar Power connection: 220/230 V / 50 Hz Motor power: 0.27 kW Electrical power consumption: 0.6 kW Fire chamber pressure: 1.6 mbar Burner number: 0201756 Year of manufacture: 2002 Dimensions Internal dimensions approx. W 1900 mm x D 2950 mm x H 1800 mm External dimensions approx. W 2530 mm x D 3300 mm x H 2800 mm You can find more items – new and used – in our shop! Hjdpfx Aod Spx Djbkjnu International shipping costs available upon request!

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Hedpfx Aexbgrgobkenu Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: excellent (used), Year of construction: 2021, EMCO E350, SIEMENS 828D, 10,000 RPM 3-axis CNC milling machine with integrated 20-position tool magazine. Hnodpfx Asz Nm A Tsbkju Control: SIEMENS 828D Spindle: Speed: 10,000 RPM Spindle power: 7 kW Torque: 41 Nm Tool holder: SK30 ISO7388-1 (DIN 69871) Pull stud: ISO7388-3 (DIN69872 Type A) Travel: X=350mm, Y=250mm, Z=300mm Spindle nose to table distance: 120-420mm Rapid traverse X, Y, Z: 24 m/min Table: Cast iron table with T-slots Number - Width - Pitch: 5 - 12 - 45 Clamping area: 520 x 300 mm Maximum table load: 100 kg Tool changer: Drum magazine with 20 tool positions Tool change time (tool to tool): 2.5 seconds Coolant: Standard pump 3.5 bar Work area lighting: Via 1 halogen spotlight Standard equipment: o Central lubrication o Thread cutting without collet o Spindle blow-out device for cleaning the tool holder during tool changes o Coolant tank 140 liters o Vibration-damping leveling feet o Mounting angles and heavy-duty anchors Year of manufacture: 2021 Machine No. Q4A211601 Includes: Control language: Italian NC handwheel, portable Fastening material ET420/345/332 E45/65 MT45/65 Leveling element FK03/NBR05/NBR9014 Heavy-duty anchor FH18x80/50 B M12 Fastening material High-pressure coolant system 50Hz Coolant gun Warning light, LED, 3-way, side-mounted E350 Operating manual / ITALIAN

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231682, For sale is a Büchele / SF-Systeme SFB-301 eco high-pressure system with a 150 bar operating pressure, replaceable filter system, additional 10 µm fine filter, 8 valves, and a 200-liter tank capacity, manufactured in 2012. Technical data Manufacturer: SF-Systeme Büchele Model: SFB-301 eco Year of manufacture: 2012 Max. operating pressure: 150 bar Flow rate at 150 bar: approx. 24 l/min Tank capacity: approx. 200 liters Main filter system: replaceable filter Filter fineness of main filter: approx. 40 µm Additional filter / fine filter: 10 µm Hedpfx Aboz Ir Idokenu Valve configuration: 8 valves Number of coolant outlets: up to 8 separately controllable circuits, depending on machine integration Overall dimensions L × W × H: approx. 1,475 × 700 × 730 mm Medium: cooling lubricant / KSS Technical documentation available. The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2019, MAXXMILL 750 5-SIDE UNIVERSAL MACHINING CENTER SIEMENS 840D SL, 15,000 RPM 5-Side Universal Machining Center with integrated tool magazine, 30 positions Control: Sinumerik 840D-sl / OPERATE o SHOPMILL dialog programming o USB interface o Network drive / Ethernet o 22" TFT color touch monitor o 3D simulation o EMCONNECT Spindle: Motor spindle, water-cooled Spindle power: max. 20 kW Speed: 50 - 15000 RPM Torque: max. 100 Nm Tool holder: ISO 40 DIN 69871 Drawbar: ISO7388/2 Type B (not included in the basic machine) Travel: X=750+50mm, Y=610mm, Z=500mm Spindle nose – table distance: 150–650 mm Rapid traverse X-Y-Z: 30 m/min B-,C: 25 RPM Table: driven by worm gear Cast table, ground with T-slots Number – Width – Spacing: 5 – 14 – 100 Clamping area: 750 x 600 mm Table load maximum: 300 kg Tool changer: Drum magazine with 30 tool positions. Tool change time (chip to chip): 4.9s (VDI2852) Standard equipment: o Advanced Surface (Siemens option) o LED work area lighting o Spindle air blow-out device for cleaning the tool holder during tool change o Central lubrication o Coolant pump 2 bar o Coolant tank 250 liters o Leveling elements (5 pieces) o Tool magazine door for maintenance o Direct measuring system B-axis Year of manufacture: 2019 Machine no.: M-007.038.19 includes: 8AO-PRESET750SIE LASER DEVICE MARPOSS 8AO-VOLREMSIE630 ELECTRONIC HANDWHEEL 8AO-ADDREFMM750EI AIR - LIQUID COOLING 8AO-TRASPMM750 HINGED BAND CHIP CONVEYOR MM750 Hnodoz Anw Hspfx Abkju 8AO-IMPLAVXX50 SPRAY GUN 8AO-COMM750XX01 STANDARD PACKAGING 8AO-MAGUT750XX05 TOOL MAGAZINE FOR 40 TOOLS MM750 8AO-CICMI750SIE AUTOMATIC WORKPIECE MEASUREMENT WIRELESS 8AO-SUPTAVOLAMM750 FRONT SUPPORT TABLE 8AO-APPLGRMM751 ROTARY TABLE THROUGH SPINDLE 8AO-PLU08S00119A AUTOMATIC LOADING DOOR RIGHT MM750 8AO-ILU08X00119A MACHINE ROOM FLUSHING 8AO-ROTTSIE750 GLASS SCALE 3 AXES X-Y-Z SIEMENS 8AO-TRASFUM750MM 40-POSITION MAGAZINE ISO40 ACCORDING TO DIN69872 8AO-COPSUPXX750 UPPER MACHINE COVER MAXXMILL 750 8AO-INTROB012 STANDARD HANDLING INTERFACE PROFINET 8AO-CIN250LMSIE KINEMATIC MEASURING CYCLE 8AO-APPLEN750SIE DIRECT MEASURING SYSTEM B AND C 8AO-MM7503D 3D DATA MODEL MaXXmill 750

Condition: good (used), Year of construction: 2013, Alimak TPL 2000D Transport Platform Brand: ALIMAK HEK Type: TPL 2000D Year of Manufacture: 2013 Serial Number: 50138 Weight: 1900 kg Overall Length: 1500 mm Overall Width: 3200 mm Power Supply: 400 V, 50 Hz, 3-phase Rated Power: TP 2x3.8 kW, MH 2x7.6 kW Rated Current: TP 15.4 A, MH 30.4 A Connected Load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg): 2000 Maximum Number of People (including payload) in TP Mode: 7 Number of People in MH Mode: 0 Lifting Speed (m/min) Operating Mode TP: 12 Lifting Speed (m/min) MH Mode: 24 Maximum Lifting Height (with stays): 100* m Maximum Outreach (m): 7.5 Hnodpfetnda Eox Abkju Maximum Overhang (m): 4.5 Maximum Height of the First Stay (m): 6 Mast Type: Triangular Mast 350, Steel Tube You can find more transport platforms – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2013, condition: good (used), ALIMAK HEK TPL 1800 Transport Platform Construction Elevator, Year of Manufacture 2013 Power consumption: 21 kVA Required fuse rating: 32 A Voltage/Frequency: 400 VAC/50 Hz Lifting speed: Transport platform (TP) 12 m/min Material hoist (MH) 24 m/min Max. height 100 m Load capacity 1800 kg Platform length 4.4 m Platform width 1.5 m Power source: Electric Mast connection distance: 7.5 m Quantity: 1 Hnedpfxstndfne Abkeu Brand: ALIMAK HEK Type: TPL 1800 Year of Manufacture: 2013 Serial number: 50187 Load capacity: 1800 kg Weight: 2100 kg Overall dimensions (L): 4400 mm Overall dimensions (W): 1500 mm Alimak TPL 1800 Transport Platform You can find more transport platforms – new and used – in our shop! International shipping costs available upon request!