Used Double Diverter Valve for sale (15,573)

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. Ncodpfx Aedzp T Nsmnjt The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) Ncjdpfewva I Hex Amnot - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm Ncodpfxodzp Tcj Amnet ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, faceplate diameter 3100 mm swing diameter 3600 mm turning height 3600 mm control Fagor 8035 table load 35 t turning speeds 0,32 - 40 U/min max. ram stroke 3000 mm table load 35 t turning speeds 0,32-40 U/min total power requirement 70 kW 2x Ram head 250 x 250 mm Chip conveyor Ncsdpfx Amoyqt Hdonjt Mist extraction unit Coolant system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Pneumatic valves from GEA, Alfa Laval, and APV (10 pallets). Approximately 150–170 pieces. Two pallets with Alfa Laval valve control heads. One pallet with unused valves. Ncodpfeyk Hlyjx Amnst

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Nodpjx A Hggefx Amnoct

Condition: used, mileage: 678,444 km, power: 368 kW (500.34 HP), first registration: 07/2018, fuel type: diesel, number of seats: 74, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, navigation system, onboard kitchen, trailer coupling, = Other Options and Accessories = - DVD - Air conditioning - Front refrigerator - Sleeper cab - Toilet - USB connections - Webasto heater = Further Information = Height: 400 cm Damages: none = Company Information = Ncsdpew Dn Ikefx Amnst We are an international company based in Belgium, located near Brussels (approximately 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and in every price range in stock. We can help you find the right tourist, school, or city bus tailored to your needs or budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Bus inspection visiting hours: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, mileage: 659,549 km, power: 390 kW (530.25 HP), first registration: 10/2022, fuel type: diesel, number of seats: 79, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = - DVD - Air conditioning - Front refrigerator Nsdpfxsx Nh T Do Amnjct - Sleeper cab - Toilet - USB connections - Webasto heater = Further Information = Height: 400 cm Damages: none = Company Information = We are an international company based in Belgium, located near Brussels (approximately 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and in every price range in stock. We can help you find the right tourist, school, or city bus tailored to your needs or budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Bus inspection visiting hours: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, mileage: 251,212 km, first registration: 02/1992, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, Year of construction: 1992, Cab: double Ncedpsy Sbxrefx Amnst Contact Thierry Leemans for further information.

Condition: new, Siemens 6SL3120-2TE15-0AA4 double motor module SN:T-H06211033, unused, 100% functional, delivery as per photos. Nedpoy Nr Nvofx Amnect

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Njdjxnlgcjpfx Amnoct Storage location: Garbsen

Condition: new, new ! all stainless steel variable speed microcontroller Ncjdpsy Ex Rfjfx Amnjt 2 mixing directions pneumatic lid inspection gantry safety lid 11kW CE-approved Suitable for loader with “Easy Connect” Easy clean overall dimensions (l x w x h) : 2.180 x 1.000 x 1.600 mm + Loader for eurobins

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders Nsdpfxoxq Hkuo Amnsct The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2009, faceplate diameter 3000 mm swing diameter 3500 mm turning height 3200 mm Control Fanuc type Series 320i Model A slide adjustment 1750 mm ram head dimension 300x300 mm x-axis 2700 mm Table load 30000 kg main drive motor 100 kW Tool changer 16 Ncjdpoyqu Rwjfx Amnst weight of the machine ca. 89 t dimensions of the machine ca. 8,5x6x8 m No. 1104 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Double-sided bench grinder GREIF Type D 20-5-3 Grinding wheel diameter: 200 mm Grinding wheel width: 25 mm Nedpfxey Sbw Io Amnoct Grinding wheel speed: 3000 rpm Motor power: 0.55 kW Power supply: 380 Volt, 50 Hz - Cast iron base (original) The material rest at the left grinding wheel is missing.

Condition: used, mileage: 27,638 km, power: 129 kW (175.39 HP), first registration: 12/2023, fuel type: diesel, CO₂ emissions: 352 g/km, color: grey, gearing type: automatic, emission class: euro6, number of seats: 6, Year of construction: 2023, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, cruise control, immobilizer system, navigation system, parking sensors, power assisted steering, sliding door, traction control, trailer coupling, = Additional Options and Equipment = Njdpfx Aoyla R Esmnoct - 12-volt socket - Adaptive cruise control - Apple CarPlay - Armrest - Heated exterior mirrors - Passenger airbag - Third brake light - Electrically adjustable exterior mirrors - Driver airbag - Tinted glass - Wood trim - Height-adjustable steering wheel - Air conditioning - Leather steering wheel - Leather gear knob - Alloy wheels - Multifunction steering wheel - Rear parking sensors - Radio - Reversing camera - Right-hand sliding side door - Immobilizer = Further Information = General Information Number of doors: 5 Model year: 2026 Cab type: double cab Technical Information Number of cylinders: 4 Engine displacement: 2,998 cc Transmission: 8-speed automatic Dimensions Length/height: L3H2 Weights Unladen weight: 2,417 kg Payload: 1,083 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 3,500 kg (unbraked 750 kg) Maintenance APK (general inspection): valid until 12/2026 Warranty Warranty: BOVAG warranty – 6 months Warranty: 6 months Warranty: 10,000 km Product Safety Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: used, mileage: 192,984 km, power: 90 kW (122.37 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 08/2021, CO₂ emissions: 195 g/km, emission class: euro6, color: black, number of seats: 6, number of previous owners: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, General information Number of doors: 5 Model range: Mar 2019 - Oct 2021 Cab: double Technical information Torque: 340 Nm Number of cylinders: 4 Nsdpfx Amsw T Rqfjnjct Engine capacity: 1.997 cc Transmission: 6 gears, Manual gearbox Top speed: 170 km/h Measures length/height: L3H1 Dimensions (LxBxH): 531 x 192 x 195 cm Weights Empty weight: 1.745 kg Carrying capacity: 1.215 kg GVW: 2.960 kg Interior Interior: black Consumption Average fuel consumption: 5,6 l/100km (50 MPG) Urban fuel consumption: 6,4 l/100km (44 MPG) Extra urban fuel consumption: 5,2 l/100km (54 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 12/2026 Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Apple CarPlay - Automatic dipped headlights - Car kit - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front central armrest - Heated door mirrors - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Partition - Radio - Rear doors - Rear parking sensor - Sliding side door right - Start / stop system - Telephone enabled with Bluetooth - Third brake light

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Ncsdpfxoykbcms Amnot Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid gas valve, gas solenoid valve Nodpfx Ajtuycromnsct -Manufacturer: Bürkert, solenoid valve unused -Type: 0313 D 2.0 FKM MS -ID No.: Voltage: 82-148 V -Quantity: 97x valve available -Price: per piece -Dimensions: 68/32/H51 mm -Weight: 0.2 kg/piece

Condition: used, cutting length ca. 2.200 mm Nodpfew D Dfxox Amnsct mitre angle 45° - 90° workpiece max. 50 x 70 mm

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM Nodpfx Aeh U Nvksmnect ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, 1 unit, double grinding stand, AEG DWSL 200/500 Nedpoy Th Ivjfx Amnsct Color: as shown in the images, in accordance with the images and inspection Condition: used

Condition: used, PNEUMAX 5/2-way solenoid valve, type: 2431.52.00.36.05. Ncedpfx Aslkclcjmnet

Condition: used, PNEUMAX 5/2-way solenoid valve G1/4, type: 2431.52.00.35.05. Ncjdpfslkck Ujx Amnst

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Ncjdpfx Amjvuuh Tenjt Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available