Used Doosan Collaborative Robot for sale (2,788)

Condition: like new (used), Year of construction: 2017, operating hours: 1,494 h, functionality: fully functional, Control: DOOSAN-FANUC i Series Table dimensions: 1300 x 570 mm T-slots on the table: 4 x 125 x 18H8 Max. table load: 1000 kg X-travel: 1050 mm Y-travel: 570 mm Z-travel: 510 mm Max. spindle speed: 12000 rpm (Direct drive) Kedpfx Asy Smdaskzslt Taper: BT40 Rapid traverses X/Y/Z: 36 / 36 / 30 m/min Feed rates: 1 - 15000 mm/min Drive power: 18.5 / 11 kW Power requirement: 400V / 50-60 Hz / 32A Weight: 6500 kg Dimensions LxWxH: 2960 x 2372 x 2800 mm Accessories, Equipments - Chip conveyor - Coolant system - Spindle chiller - RENISHAW tool setter - RENISHAW workpiece probe without touch probe - Signal tower - 15-20 pcs of BT40 tool holders + pull stud and cutting tools - Transformer The machine was barely used. It produced parts for Jet-Skies (mostly plastic parts). Very nice machine. It is ready to buy. Under power in our showroom in Hungary.

Condition: excellent (used), functionality: fully functional, power: 40.45 kW (55.00 HP), color: red, overall weight: 5,930 kg, digging bucket width: 600 mm, Year of construction: 2015, operating hours: 4,250 h, machine/vehicle number: AFVF6007995, Equipment: UVV, air conditioning, cabin, standard shovel, Technical data: Weight: 5,930 kg Kledpfey D A Apex Akzot Dimensions: 6,120 x 1,920 x 2,855 mm Maximum speed: 20 km/h Power: 40.8 kW (55.5 hp) The excavator is used and has been regularly maintained. Air conditioning available. Including MS03 accessories: 600 mm digging bucket KL4 1,500 mm hydraulic ditch cleaning bucket Häner HGS53 hydraulic hammer Kinshofer grab, 600 mm wide Ripper tooth

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 7,710 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,340 mm, power: 43 kW (58.46 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Good Front tire type: Solid rubber Front tire condition: 80 – 100% Rear tire type: Solid rubber Rear tire condition: 80 – 100% Description: Diesel forklift DOOSAN D30G – 3,000 kg lifting capacity – Year of manufacture: 2008 – Sideshift – TRIPLEX free lift mast – Overall height: 2.2 m – Lifting height: 4.7 m – 7,710 operating hours according to meter – 4-cylinder YANMAR diesel engine with 58 HP – Solid rubber tires approx. 80% – Semi-cab, lighting system – Simple, mechanical forklift – Good condition – PRICE: 11,000 EUR excluding VAT Sideshift Klsdpfsy N H Ersx Akzjt Third valve, rear working lights, front working lights, semi-cab, heating, full cab.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 4,790 h, load capacity: 2,500 kg, lifting height: 6,100 mm, fuel type: diesel, mast type: triplex, construction height: 2,630 mm, power: 44 kW (59.82 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Kodpfx Akoy N H Dzszelt Front tires type: Solid rubber Front tires condition: 60 - 80% Rear tires type: Solid rubber Rear tires condition: 60 - 80% Description: Diesel forklift DOOSAN D25G -- 2.5 ton lifting capacity -- year of manufacture 2017 -- side shift -- TRIPLEX free lift mast -- overall height 2.63 m -- lifting height 6.10 m -- 4,790 operating hours according to counter -- forklift with 4-cylinder YANMAR diesel engine, 59 HP -- mechanical hydraulic levers -- solid rubber tires approx. 70% -- work lights -- simple, mechanical forklift with very good visibility through mast -- good condition -- the front loader can be inspected on site -- affordable delivery options! Features: Side shift, 3rd valve, rear work light, front work light, roof cover.

Condition: used, power: 81 kW (110.13 HP), Year of construction: 2015, operating hours: 6,035 h, Empty weight: 1 kg Please contact Emal Jaweed for more information Kjdpfx Akoy Ey D Hjzelt

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 4,799 h, load capacity: 16,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,870 mm, power: 118 kW (160.44 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift truck - Diesel Load center: 600 Kledpfxjy Scxte Akzet Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Rear tires type: Air Description: Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab,

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display - 12.000 RPM spindle 28 kW, 159,3 Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun Klsdjy Tmlmspfx Akzet -tool load monitoring -tool breakage detection with needle -automatic doors -robot interface -4th axis preparation -HIWIN RCV-320 rotary table -HIWIN RTS-320 support -Hydraulic aggregate 200 bar 3 A+B -preparation for rotary table hydraulic 2x(3A+B) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor

Condition: used, Year of construction: 2019, x-travel 1300 mm y-travel 670 mm z-travel 625 mm Klodpfxsyzt Ane Akzet control Siemens Sinumerik 828D weight of the machine ca. 8500 kg

Condition: like new (used), Year of construction: 2018, Doosan Puma 2600, year 2018/11 Fanuc Excellent condition, only 1000 operating hours Max. turning diameter: 481 mm Max. turning length: 790 mm Chuck: 250 mm Spindle bore: 76 mm 12-position turret Tailstock Chip conveyor Klodpey Snuyjfx Akzst Documentation

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Kljdjy Amfljpfx Akzet

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series 21i-MB, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details. • Distance spindle face to pallet center: 150–900 mm Kodpfx Akeyxpplozslt • Distance spindle center to pallet surface: 50–750 mm • Pallet size: 500 x 500 mm • Max. pallet load: 500 kg • Spindle orientation built-in sensor • Through-spindle coolant: 70 kg/cm², max flow 20 L/min, pump power 3.7 kW • Spindle completely overhauled in 2023 • Z-axis ball screw replaced in 2020 Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,193 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, controller manufacturer: FANUC, controller model: F0i, number of axes: 2, Horizontal turning machine manufactured in 2018. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 5,000 rpm and a chuck size of 8” (210 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details regarding this machine. • Control: Fanuc F0i • Operating hours: 6,193 h • Spindle: 8" chuck (210 mm); bar capacity Ø52 mm • Capacity: Max turning diameter Ø350 mm; max turning length 330 mm Kedpjyxhqzjfx Akzelt • Axes: rapid traverse X/Z 30 m/min • Turret: 12 stations; tool change time 0.15 s; tool shank 25 x 25 mm; boring bar Ø32 mm • Tailstock: Programmable with rotating tip • Certification: CE • Software/monitoring: Doosan tool load monitoring system Additional equipment • Basic tool holder set • Oil mist extractor • Transformer • Bar feeder preparation • Workpiece catch with collection box • Automatic tool gauge • High-pressure cooling 7 bar (1.1 kW) • Oil separator • Chip collector • Electrical noise suppression Technical Specification Counter Spindle No Driven Tools No

Condition: used, machine/vehicle number: FBA11-2390-00377, Year of construction: 2015, operating hours: 7,513 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, gearing type: automatic, battery voltage: 48 V, fork length: 120 mm, color: orange, 2015 Doosan Forklift Type B18T-7 48 volt E0583 2015 Fork positioner Lifting capacity: 1,800 kg Fork length: 1.20 m Triplex mast Including charger Test valid until 10/26 = Further Information = Kledpeyxg Dmsfx Akzst Year of manufacture: 2015 Unladen weight: 3,356 kg Lifting capacity: 1,800 kg CE marking: yes Overall condition: average Technical condition: good Visual condition: average

Condition: used, Year of construction: 2016, operating hours: 11,200 h,

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 320 rotary table -HIWIN RTS 320 suport -Hidraulic aggregate 200 bar 3 A+B -4th axis fixture support hydraulic (4x oil, 4x air) Kljdpfxoyzgp Uo Akzjt -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, DNM 6700L from DN Solutions is CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine -12 bar through the spindle cooling -ball screw nut cooling -oil skimmer belt type -ethernet connection -coolant gun -tool breakage detection in magazine -automatic doors -robot interface -air clamp interface on the table -vacuum pump -seat air check -level sensor for coolant liquid Ksdpoyzhbfofx Akzjlt -LNS MH500 chip conveyor- right side -mist collector interface

Condition: excellent (used), Year of construction: 2007, Type: Industrial robot Brand: Ksdpor Iy Nkofx Akzolt Hyundai / Hanwha TechM Year of production: 2007 Maximum load: 200kg

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Kljdpfsiy Nppox Akzet Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 170 kg, type of cooling: water, welding current (max.): 500 A, workpiece weight (max.): 10 kg, Equipment: documentation/manual, We offer this as-new CRP Robot / CROBOTP HY 1006A-145 + Ehave CM 500AR welding robot, manufactured in 2019. Manufacturer: CRP Robot / CROBOTP Model: HY 1006A-145 + Ehave CM 500AR Year of manufacture: 2019 Condition: as new ID Category: 905 ID Type: 1918 Machine Type: welding robot Kedpfxoy S R Ebe Akzslt Industrial 6-axis welding robot in excellent condition, used for approximately 3 months – almost like new. Ideal solution for companies looking to automate welding production, increase productivity, and achieve consistent weld quality. Technical Specifications Model: CRP-RH14-10-W 6-axis industrial welding robot Reach: 1450 mm Payload: 10 kg Welding source: 500 A Water-cooled torch Repeatability: ±0.08 mm Robot weight: approx. 170 kg Easy and intuitive programming Advantages ✔ High welding precision ✔ Stable and repeatable weld quality ✔ Significant increase in production efficiency ✔ Easy operation and programming ✔ Suitable for automated and serial production ✔ Machine in excellent condition The machine is fully functional and ready for immediate operation.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Klsdpfjxw Ilmsx Akzot Swing 780mm X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Swarf conveyour Renishaw Toolsetter

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, overall weight: 3,100 kg, number of axes: 2, Horizontal turning machine manufactured in 2021. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 6,000 rpm and a chuck size of 6” (160 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details. • Chuck size: 6" (160 mm) • Bar capacity through spindle: Ø52 mm • Max turning diameter: Ø350 mm • Max turning length: 330 mm • Rapid traverse (X/Z): 36 m/min • Tool size: 25 x 25 mm (OD), Ø32 mm (ID) • Turret: 12 stations, tool change time 0.15 s • Tailstock: Programmable with rotating tip • Options/features: Doosan tool load monitoring system; Automatic tool setting; High‑pressure coolant 7 bar (1.1 kW); Oil separator; Electrical noise suppression; Bar feeder preparation • Certification/Power: CE certification; Transformer Klodpfx Akjyvqinjzst • Operating hours: 2,898 h Additional equipment • Basic tool holder set • Oil mist extractor • Chip conveyor • Workpiece collecting box (parts collection) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over the machine bed: 750 mm Swinging diameter over the top slide: 540 mm Swinging diameter over the cross slide: 270 mm Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Kledpfx Akjy Tw Ulozet Travel range Z-axis: 1,050 mm Rapid traverse rate X-axis: 36 m/min Rapid traverse rate Y-axis: 26 m/min Rapid traverse rate Z-axis: 36 m/min Power of the spindle motor: 22 W Spindle speed main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed milling spindle (max.): 12,000 rpm Bar passage: 76 mm Bar diameter (max.): 65 mm Spindle nose: A2#6 Spindle diameter: 110 mm MACHINE DETAILS Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Total weight: 12,000 kg Operating hours: 8,977 h EQUIPMENT Documentation/Manual

Condition: used, Year of construction: 2014, operating hours: 240 h, fuel type: diesel, color: white, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Power: 417 Current frequency: 50 Hz Voltage: 380/400 Manufacturing country: United Kingdom Kedpoyiltdsfx Akzolt

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Kodpfx Akswu Rgqezelt Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: excellent (used), Year of construction: 2015, DOOSAN G30 Generator Set – Machine after full service! Technical data: Power: 31 kVA (25 kW); Year of manufacture: 2015; The generator is fully operational, ready for work, with warranty. Net price: PLN 26,500 Kjdpfx Akoylifrjzolt Gross price: PLN 32,595 Below you will find a link to a video showing the machine in operation.