Used Cosmetic Nozzle for sale (2,987)

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 09/2026, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbocharged diesel engine, 2.0 l / 130 kW (4V) * Start-stop system with brake energy regeneration * One towing eye at the front * Trailer hitch, fixed * Standard wheelbase 3,640 mm * Mud flaps at the front and rear * Fuel tank 75 l * Reinforced suspension/damping and reinforced stabilization * Approved as a 3.5t vehicle * Reinforced front axle Lodpfx Aszc Dg Esbyohn * Permissible total weight 3,500 kg * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R16C 115/113 R, low rolling resistance tires, tire brand not specified * All-season tires * Battery 520 A (92 Ah) * Immobilizer, electronic * Electrical terminal block and CAN gateway with ABH programming * 'Climatic' air conditioning in the driver's cab * 2nd battery (AGM battery) with separation relay and battery monitoring * 2nd heat exchanger and 2nd evaporator * Daytime running lights with assist lights * LED main headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Fog lights incl. cornering lights * Side marker lights * Heated windshield washer nozzles at the front, without windshield washer fluid level indicator, without headlight cleaning system * Step lighting * Exterior mirrors, electrically adjustable and heated * Convex exterior mirrors on the left and right, with integrated LED turn signal and wide-angle view * Normal roof * Rear step, covering half the width * Grab handles on the rear pillars * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Radiator protection grille, black with chrome strip * Rear wing doors with increased opening angle * Windshield wiper interval control with light and rain sensor * Sliding door, right * Side window in the passenger/cargo compartment, front left, fixed * Side window in the passenger/cargo compartment, front right, fixed * Laminated front windshield with heat-insulating glazing, heated * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot and reading light (only with 2nd evaporator) * Sun visors, foldable and pivotable to the side * Electronic parking brake * Premium interior noise damping * Glove compartment with lockable flap, illuminated * Safety interior mirror, dimmable * Leather multi-function steering wheel, heated with Tiptronic * 12-V socket and 2 cup holders in the instrument panel * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Seatbelt warning system, E-contact in the seatbelt buckle * 2 radio remote controls * Keyless Go * Water auxiliary heater, with remote control * Chrome package * Suspension seat 'ergoActive' left * Seat 'Comfort' right * Seat covers in synthetic leather 'Mesh' * Seat heating for driver and front passenger seat, separately adjustable * Digital instrument cluster * Manual regeneration of the diesel particulate filter * Tire pressure monitoring system * USB Type-C data and charging port(s) with increased charging power * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect (call services), with OCU3 low * Comfort telephony * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Parking assistance system front and rear * Cruise con

Condition: excellent (used), Year of construction: 2023, OCE Canon Colorado 1630 upgraded to 1650 Lhedpsz A A A Ujfx Abyjn The Canon Colorado 1650 is a 64-inch industrial production roll-to-roll printer designed for high-volume sign, graphics, and wallcovering production. Built on Canon's UVgel technology, it balances fast print speeds with flexible ink formulation and automated media handling. Year: 2023 Colours configuration: 2 x CMYK Mileage: 14.000m² ONLY!!! Upgrade: FLXfinish+ Option: While the 1630 can be upgraded to support basic matte/gloss finishes, the 1650 fully utilizes the FLXfinish+ system. This allows you to print a combination of matte and gloss finishes simultaneously in a single pass, without changing inks, changing varnish, or swapping media. Double-Sided Printing: Offers fully integrated support for seamless, automated double-sided printing (useful for indoor/outdoor blockout banners). Dual-Roll Feed: Unlocks automated roll-feeding and automated switching across 2 active media rolls smoothly, whereas the base 1630 comes standard with a single-roll configuration. For further technical details please refer to attached brochure. Printing & TechnologyPrinting Method: UVgel piezoelectric inkjet.Printheads: 8 x UVgel 415 printheads (2 independent printheads per CMYK color channel).Resolution: Up to 1,800 dpi print resolution.Nozzle Control: Integrated PAINT (Piezo Acoustic Integrated Nozzle Technology) which sends acoustic pulses to constantly monitor, diagnose, and recover clogged nozzles automatically on the fly.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,720 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,235 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Standard Technical condition: good Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire condition: 0 - 20% Battery voltage: 80V Battery capacity: 625Ah Battery manufacturer: Kapatest, 95% capacity Battery year of manufacture: 2019 Ljdpozk Sauofx Abyehn Description: New black SE tires, new orange paint, new gray paint for step plates, repair of ventilation nozzles and heater, new rear window, battery regeneration, equipment cleaning, new inspection, new acceptance according to FEM. Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, impulse control, CE certificate.

Condition: used, mileage: 39,440 km, power: 125 kW (169.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,272 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 1170. P653045 ----EQUIPMENT * Smartphone storage including wireless charging * Storage above roof lining * Rear door step * Electrically folding exterior mirrors * Exterior mirrors without indicators * Seats: Two-seater passenger seat * Front side indicators * Active Brake Assist * Ceiling light in cargo/passenger compartment - with door contact * Anti-theft alarm and intrusion alarm system * Digital owner's manual * Entry handle on rear left corner pillar * Electrical system for trailer socket in conjunction with 14 V/250 A generator * Chassis stabilization level I * Misfueling protection * Seat belt warning system for passenger seat * Grab handle for driver and passenger entry * 93-liter main tank * Wooden floor (cargo area) * Interior trim in cargo area up to roof height - wood * Hinged lid for storage compartment * Tempmatic air conditioning system * Comfort overhead control panel * Seats: Comfort driver's seat * Cargo area lighting via motion detector * Load securing: Tie-down rails on the side wall and roof frame * Load anchoring rail system * Cable duct on the rear portal * Cable duct on the side wall * Navigation accessories: Live Traffic Information * MBUX multimedia system with 7-inch touchscreen. High-resolution 7-inch touchscreen (960 x 540 pixels). AM/FM radio with dual tuner. Bluetooth connectivity with audio streaming and hands-free function. Smartphone integration via Android Auto or Apple CarPlay. Multimedia connection unit for connecting portable devices via a USB-C interface. 4 x 25 W output power, tone adjustment, separate volume settings for audio and phone. 2-way speakers at the front. * Marker lights, side. * Steering wheel: Multifunction steering wheel * Navigation voice control: LINGUATRONIC Wi-Fi hotspot. Multimedia connection unit for connecting portable devices via an additional USB-C interface. Center-fill speakers for improved sound and voice output. Improved hands-free function. Dual-phone operation Digital owner's manual * Navigation: 3 years of free map updates * Fog lights with cornering lights * Acoustic package * Instrument panel charging package The charging package expands the charging options in the cockpit with two 5V USB-C ports and a 12V socket. One USB port and the 12V socket are installed in the center storage compartment of the instrument panel, and another USB port is located in the lower section of the center console. This allows charging of electrical devices such as mobile phones within easy reach of the driver and front passenger. * Package: Parking package with 360° camera, Parking Assistant, Rear Cross Traffic Alert, Drive Away Assist * Radio: Digital DAB radio * Wheel arch loading * Double rear door, opening to the side wall * Vibration damper * Heated driver's side seat * Heated passenger seat (2-seater) * Power socket in passenger compartment * Cruise control * 5 V USB socket * Load securing: Tie-down rails on side wall on parapet belt Lhodpfx Abowapvboyon * Front axle with increased load capacity * Electrical pre-installation, configurable special module * Elimination of vehicle lowering * Long-range nozzles in instrument panel * ADAPTIVE ESP * Storage above windshield * Storage compartment under cockpit * Rear towing eye * Axle ratio i = 3.923 * Driver's side airbag * Electric adjustable and heated exterior mirrors * Outside temperature display * Hill start assist * Third brake light * Adaptive brake lights * DPF, SCR * Tachometer * Entry handle on r

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,000 h, clamping force: 3,000 kN, screw diameter: 50 mm, injection weight: 375 g, total width: 2,100 mm, total height: 2,500 mm, overall weight: 14,600 kg, product length (max.): 7,000 mm, Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details. • Max. mould opening stroke: 600 mm • Min./Max. mould installation height: 280 / 650 mm • Max. platen distance: 1250 mm • Tie bar spacing (H x V): 730 x 730 mm • Min. mould size: 470 x 470 mm • Platen size (H x V): 1040 x 1040 mm • Ejector stroke: 160 mm • Ejector force: 68.6 kN • Injection unit size: Euromap 120 • Screw L/D ratio: 20 • Theoretical shot volume: 412 cm³ • Injection pressure: 2000 bar • Holding pressure: 1600 bar • Injection speed: 160 mm/s Ljdeyrgq Espfx Abyshn • Injection rate (PS): 274 g/s • Screw speed: 320 rpm • Plasticizing rate: 46 g/s • Nozzle contact force: 85 kN • Barrel heating power: 20.2 kW • Connected load: 36 kW / 60 A • Hydraulic pressure: 175 bar • Hydraulic flow rate: 90 l/min • Oil tank capacity: 135 l • Material hopper volume: 50 l • Control system: Sigmatek with 15" colour touch screen • USB interfaces: 3 • Robot interface: Euromap 67 • Robot adapter: Euromap 18 • Form data memory: up to 200 moulds • Production data recording: up to 100000 cycles • Statistical process control (SPC) system • Central lubrication system • Automatic mould height adjustment • Compact 5-point toggle clamping system • Hydraulic ejector system with vibration function • Parallel mould opening and ejector movement • Up to 3 hydraulic core pulls • Cooling water distributor system • PID temperature control system • Ceramic heater bands with thermocouples • Automatic purge function • Energy-saving cylinder insulation • Adjustable machine feet • Installation tools included • Hours: ca. 12,000

Condition: used, mileage: 227,566 km, power: 81 kW (110.13 HP), first registration: 04/2022, fuel type: diesel, empty load weight: 2,073 kg, maximum load weight: 927 kg, overall weight: 3,000 kg, wheelbase: 3,400 mm, next inspection (TÜV): 06/2028, fuel: diesel, fuel consumption (urban): 7.9 l/100km, fuel consumption (extra-urban): 6.1 l/100km, fuel consumption (combined): 6.8 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 6, total length: 5,500 mm, Year of construction: 2022, construction height: 1,960 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, Special equipment: Trailer stabilization program, audio navigation system Discover Media Streaming & Internet (touchscreen, USB), voice control system, multimedia interface 2 x USB (Type C) in the front, mobile online services App-Connect wired and wireless, equipment package Light + Sight, automatic headlight activation, light assistant (Coming Home, Leaving Home), interior mirror with automatic anti-glare function, equipment package: Comfort Package Plus, grab handles on A-pillars, seat cover/upholstery: fabric Bricks, seats in the driver's cab: driver's seat height-adjustable, seats in the driver's cab: lumbar support for the driver's seat, interior lights in the driver's cab: front reading light, sun visors with mirror, sockets (12V connection) in the driver's cab (2), waste container, exterior mirror convex, on large bracket, exterior mirror convex, with long bracket, left, exterior mirror convex, with long bracket, right, illuminated glove compartment, heated rear window, fuel tank: 80 liters, multifunction display Plus, emergency call system, smoker's package, spare wheel with road tires, heated windshield washer nozzles and indicator for washer fluid level, heated windshield washer nozzles, indicator for washer fluid level, mud flaps front and rear, mud flaps front, seats in the driver's cab: driver's and passenger's seat heated, storage compartment under the flatbed/body, left/right, side panel trim (plywood), permissible total weight 3.00 t, auxiliary heater (hot water) with programmable parking heater function Additional equipment: Lodpfsz Suwwjx Abyshn Passenger airbag can be deactivated, airbag driver/passenger side, anti-slip regulation (ASR), exterior mirror electrically adjustable and heated, floor covering in the driver's cab: rubber, on-board tools, double headlights, driver assistance system: multi-collision brake, windshield laminated glass, radio remote control (2) foldable, glove compartment lockable, interior filter: pollen filter, body/superstructure: flatbed double cab standard, headlight range adjustment, engine 2.0 L - 81 kW TDI, radio reception digital (DAB+), wheel covers, wheelbase 3400 mm, low emissions according to emission standard Euro 6d, seats in the driver's cab: passenger double seat with storage compartment (lockable) in the seat box, seats in the driver's cab: driver's seat adjustable, seats in the cargo/passenger compartment: 1st row, 3-seater bench (fixed), steel rims 6.5x16, start/stop system engine, lashing eyes in the cargo area, warning system for safety belts in the front (visual and audible) in the rear (visual), heat-insulating glazing Equipment was determined with the help of a VIN query; technical errors may occur. CoC available. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, mileage: 159,050 km, power: 130 kW (176.75 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 2,250 mm, loading space width: 1,780 mm, loading space height: 1,600 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 4233X Lhodpfxjxy Uwno Abyon ----Why AutoNext? Over 400 cars & commercial vehicles available immediately. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle range on autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoking vehicle. Complete service history, exclusively at Volkswagen. New front and rear brakes. Like-new summer tires front and rear. Like-new winter tires rear. 230V socket in the cab. Body type: Mixed All-wheel drive "4MOTION" Number of seats: 6 Roof rack with rear ladder Rear view camera Audio-navigation system Discover Media (touchscreen color display) Speed control system (cruise control) Surround monitoring system (Front Assist) Climatic air conditioning Tinted windows 8 tires Summer tires on steel rims Winter tires on steel rims Upon request, we can offer you a trailer coupling retrofit for only 599 euros. If possible, we can also increase the trailer load to up to 3.5 tons. ---- Special equipment: * Audio-navigation system Discover Media (touchscreen color display) * Voice control system * Multimedia interface USB (iPhone / iPod) with AUX-IN * Volkswagen Media Control and App-Connect * Lockable glove compartment * Driver assistance system: Surround monitoring system (Front Assist) with City Emergency Braking * Driver assistance system: City Emergency Braking * Spare wheel in driving condition incl. on-board tools and jack * On-board tools and jack * Mud flaps front and rear * Mud flap front * Mud flap rear * Winter package * Headlight cleaning system (SRA) * Indicator for windshield washer fluid level * Heated windshield washer nozzles * Heated windshield * Auxiliary heater (air) * Airbag driver/front passenger, front passenger airbag switchable * Mounting rails for roof rack * Driver assistance system: Fatigue detection sensor * Suspension: Damping and stabilizers reinforced, front and rear * Folding remote key (2) * Vehicle without type designation * Speed control system (cruise control) incl. speed limiter * Climatic air conditioning (cab) * Marker lights on the side * Smoker package * Rear view camera * Seats in the cab: Front passenger double seat with storage/compartment * Seats in the cab: Driver's seat Comfort Plus * 230V socket in the cab * Rear step integrated into the bumper Standard equipment: Anti-lock braking system (ABS), Drive type: All-wheel drive, Exterior mirror convex, left, Exterior mirror convex, right, Turn signals LED integrated into exterior mirror, Floor covering in cab: Rubber, Cw-value underbody paneling, Double headlights, Entry handle on rear pillar, left, Entry handle on rear pillar, right, Electronic stability program (ESP), Driver assistance system: Hill start assistant, Driver assistance system: Crosswind assistant, Window in loading/passenger compartment: - fixed, front left, Window in loading/passenger compartment: - fixed, front right, Window lift electric front, Vehicle without load compartment partition, 6-speed transmission, Grab handles A-pillars, Rear wing doors without glazing, Interior lights in the cab: LED, Body/superstructure: Box double cab standard, Body variant: Normal roof, Children.

Condition: used, mileage: 178,050 km, power: 130 kW (176.75 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,550 mm, loading space width: 1,780 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Vehicle No.: 5511X ----Why autonext? Over 400 immediately available cars & commercial vehicles. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle range available on autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoker vehicle Complete service history exclusively at Volkswagen Next service in 180 days Ledsxttd Hepfx Abyjhn New front and rear brakes Body type: Mixto Maxi All-wheel drive "4MOTION" Automatic transmission Equipment line: Trendline Number of seats: 5 Trailer hitch, increased towing capacity 3,000 kg Automatic distance control ACC Rear-view camera Audio-navigation system Discover Media (touchscreen color display) Air conditioning Climatic Auxiliary heating Suspension seat "Ergo Comfort" Seat heating for driver and front passenger ---- Special features: * Trailer hitch: fixed ball head * Trailer stabilization program * Audio-navigation system Discover Media (touchscreen color display) * Voice control system * Multimedia interface USB (iPhone / iPod) with AUX-IN * Volkswagen Media Control and App-Connect * Driving assistance system: Area monitoring system (Front Assist) with city emergency braking function * Driving assistance system: City emergency braking function * Airbag driver/passenger side, passenger airbag can be deactivated * Exterior mirrors electrically adjustable and heated * Driving assistance system: Automatic distance control with vehicle stop function (ACC incl. follow to stop) * Remote control (2) foldable * Floor mats driver's cab: rubber * Vehicle without type designation * Air conditioning Climatic (driver's cab) * Steering wheel with multifunction * Rear-view camera * Hinges for rear doors with enlarged opening angle * Windshield washer nozzles heated * Seats in driver's cab: driver and front passenger seat heated * Seats in driver's cab: suspension seat ErgoComfort, driver's side (seat adjustment 20-way) * Sockets (12V connection) in the cargo/passenger compartment (2 pieces) * Rear right step * Auxiliary heater (hot water) with auxiliary heating function and remote control Standard features: Storage compartment package 2, Storage compartments: 2 DIN compartment at the front under the headliner, Interior lights in the driver's cab: reading light at the front, Anti-lock braking system (ABS), Drive type: all-wheel drive, Exterior mirrors convex, left, Exterior mirrors convex, right, Turn signal lights LED integrated in exterior mirrors, Floor covering in the driver's cab: rubber, On-board tools, Chrome package, Cw-value underbody panel, Double headlights, Entry handle on rear pillar at the rear left, Entry handle on rear pillar at the rear right, Electronic stability program (ESP), Driving assistance system: hill start assistant, Driving assistance system: crosswind assistant, Window in cargo/passenger compartment: - fixed, front left, Window in cargo/passenger compartment: - fixed, front right, Power windows front, Windshield laminated glass, Vehicle without cargo compartment bulkhead, Transmission automatic - (8-speed), Grab handles A-pillars, Glove compartment lockable, Rear wing doors without glazing, Interior lights in the driver's cab: LED, Interior lights in the driver's cab: step lights, Body/structure: box high-roof double cab, Body version: high roof in vehicle color, Child l

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of manufacture: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLK outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (incl. automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and individual image transfer to the network (view of the first 2.5 m) Additional 10 m extension of the LLK between the laser and the machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine platform version (without steel structure) Connection to STOPA large storage systems (SKL or UL) Ljdezu Sqhspfx Abyshn Safety devices for storage connection incl. 2nd light barrier circuit Storage interface (without storage trolley) LiftMaster Compact (STOPA version) TRUMPF laser: Solid-state laser TruDisk 8001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single-cutting-head strategy Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shutdown Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via the Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine cladding, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding all guarantees and warranties. Subject to prior sale. Machine can also be inspected.

Year of construction: 2022, condition: good (used), Year of manufacture: 2022 Serial number: 3849016657 Reference: 431030-9040-000 Previously serviced/supplied by Mikroskop-Center.de, Germany The system is in very good cosmetic condition and has been set up and tested for digital imaging. The Axiocam 305 Color camera is recognized by ZEISS ZEN software and live imaging is functional, as shown in the pictures. The microscope is configured for both transmitted light and fluorescence applications and is suitable for cell culture, biological research, routine microscopy, and fluorescence imaging. Configuration includes: - ZEISS Axio Vert.A1 inverted microscope - ZEISS Axiocam 305 Color digital camera - Fluorescence illumination module - Fluorescence filter positions: - DAPI - GFP - Cy3 - BF / Brightfield - ZEISS LD A-Plan 5x / 0.15 Ph1 - ZEISS LD A-Plan 10x / 0.25 Ph1 - ZEISS LD A-Plan 20x / 0.35 Ph1 - ZEISS LD A-Plan 40x / 0.55 Ph1 - Phase contrast system - Mechanical specimen stage - Binocular observation head Lhsdpfx Aoz Eztdobyjn - Lenovo ThinkPad laptop - ZEISS ZEN 3.14 / ZEN Lite installed - Camera connection cable - ZEISS accessories and documentation shown in the pictures

Year of construction: 2024, condition: like new (used), Specifications: Manufacturer: Mettler Toledo Model: XPR4002S Maximum capacity: 4100 g Readability / division: 10 mg / 0.01 g Power supply: 12 V DC, 2.25 A Country of manufacture: Switzerland The XPR4002S is part of Mettler Toledo's XPR Excellence series and is designed for accurate routine weighing in laboratory, quality control, pharmaceutical, and industrial environments. Features include: Large color touchscreen interface Lhedpfjz E A Iiex Abysn High-capacity precision weighing up to 4100 g Readability of 0.01 g Integrated weighing methods and result management Sample ID and Task ID entry Modern Mettler Toledo user interface Robust weighing platform Compact benchtop design Condition: Used, very good condition Tested and fully operational Display and touchscreen functioning correctly Weighing function tested Clean cosmetic condition Included: Mettler Toledo XPR4002S precision balance Weighing platform Power supply / cable as pictured Serial number: C448140625 The balance is available immediately from stock in Belgium. Worldwide shipping can be arranged. Please contact us for additional pictures, a shipping quotation, or a formal offer.

Condition: used, Year of construction: 2007, Overview Lsdpfx Abjz Hai Tjyehn This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed. It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer. Technical data - Manufacturer: Krones - Model: Variojet - Year of manufacture: 2007 - Machine type: rotary rinser for glass bottles - Output: up to 48,000 bottles per hour - Bottle formats: 330, 400, 500, 580 and 650 ml glass - Rinsing positions: 110 - Treatment stages: water rinsing, air blowing, gravity drainage - Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20 - Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A - Operating hours: 44,485 h - Dimensions: approx. 4.5 m across the carousel including the safety guarding Equipment - Rinser with carousel, bottle grippers and transparent safety doors - Front table with infeed screw and starwheels - Control panel with Krones iPanel - Water and air supply manifold - Domnick Hunter compressed-air dryer - Change parts for 330, 400, 500, 580 and 650 ml bottles - Water drip trays Condition Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed. Availability Available from late February / March 2027, after removal from the production line. Location: Poland.

Condition: used, Year of construction: 2006, Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack CA-1 - Year of manufacture: 2006 - Machine type: carton erector with bottom gluing - Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps - Power supply: 400 V, 3 Ph, 50 Hz, 15 A - Compressed air: min. 5 bar operating pressure - Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm - Blank infeed: roller conveyor with stainless steel rollers, roller width 1,000 mm, infeed clearance 800 x 450 mm - Outfeed: roller conveyor with stainless steel rollers, roller width 300 mm, 3,050 x 650 x 880 mm Equipment Lhedpfx Abez Hciveyjn - Stack preparation with automatic loading of the blank magazine - Blank magazine with lifting device, side guides and front and rear stops - Pick-up and erecting stations with vacuum suction grippers and vacuum unit - Folding, gluing, closing and pressing devices for the carton bottom - Side and height adjustment by handwheel for different carton sizes - Enclosure with windowed safety doors - Operator panel with display, keypad, start/stop, key switch and emergency stop; operator texts in French - Control cabinet and pneumatic service unit - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: excellent (used), - Equipped with a touchscreen display for 100 programs Lhsdpfx Abjz Inhtjysn - Variable speed control up to 30 dispensing cycles per minute - Suitable for sheet widths of 60 cm - Compatible with “standard Matfer” nozzles - Equipped with a wire-cutting function (requires an air compressor at 6 bar for this) - Includes a roller head for hard dough (e.g., meringues) and soft dough (e.g., macarons and cakes) - Includes drive for the conveyor belt, roller head, and table (height adjustment) - Easy to disassemble for cleaning - Weight: 140 kg - Electrical connection: 16A, 50 Hz

Condition: like new (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, Equipment: CE marking, For sale: professional industrial stainless steel homogenizer/high shear mixer, 3 kW, mounted on a sturdy, mobile stainless steel stand. All components are made of stainless steel 304. Suitable for intensive mixing, homogenizing, and emulsifying of creams, lotions, gels, shampoos, cosmetics, food products, and other liquid or viscous products such as paint. The machine features electric height adjustment, a frequency inverter, and a separate stainless steel control panel. Specifications/features: Motor power: 3 kW Industrial homogenizer/high shear mixer Stainless steel 304 product contact parts Variable speed via frequency inverter Electric up/down adjustment Mobile stainless steel frame Control panel with start/stop, height control, and emergency stop Ljdpfx Aboz Idm Seyshn Three-phase power connection Includes two different stainless steel mixing heads/rotors Robust industrial design Used, in good condition The machine is complete as shown in the picture. Asking price: €4,000 Serious offers are welcome.

Condition: ready for operation (used), Year of construction: 2024, laser power: 20,000 W, travel distance X-axis: 9,050 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 120 mm, number of axes: 6, This 6-axis CUTLITE PENTA PLUS LM 9030 was manufactured in 2024. It features a powerful 20,000 W RAYCUS fiber laser with an impressive X-axis working range of 9,050 mm and Y-axis working range of 3,050 mm. The machine includes advanced capabilities such as a BEVEL autofocus cutting head and a double pallet system. If you are looking to get high-quality cutting capabilities, consider the CUTLITE PENTA PLUS LM 9030 fiber laser cutting machine. Contact us for further details. • Laser source: RAYCUS Fiber Laser • Working range: • BEVEL working area: 8,500 × 2,500 mm • Dynamics: • Maximum speed: 140 m/min • Maximum acceleration: 2.5 G • Precision: • Mechanical accuracy: ±0.05 mm / 500 mm • Position repeatability: ±0.02 mm • Cutting head / axes: Lhodpfx Asz I Rlhobyen • BEVEL autofocus cutting head • B/C-axis rotation range: ±45° • Non-contact capacitive sensor • Automatic focus adjustment • Maximum assist-gas pressure: 20 bar • Automatic nozzle cleaning and capacitive sensor calibration • Control: • CNC: D.Electron Florenz Z32 • Machine supervision: Smart Manager 6 • Industrial PC with Windows 11 • 22" Full HD touchscreen • Connectivity: Ethernet, USB 3.0, Wi‑Fi • Industry 4.0 / MES integration capability • Installation requirements: • Power supply: 400 V • Recommended compressed-air pressure: 10 bar • Assist gases: Oxygen / Nitrogen / Air Additional equipment • Automatic LIFT pallet changer • Double pallet system • Chiller • Compressed-air filter • Internal monitoring camera • Standard fume extraction system • Automatic assist-gas change • Automatic sheet recognition • Lantek post processor for BEVEL cutting • Full-table protective enclosure

Condition: used, Year of construction: 2016, operating hours: 4,910 h, 2016 | Takeuchi TB153FR | Used Mini Excavator < 7t | 4910 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 66 inspection points 45 approved ✅ 21 imperfect ℹ️ 0 issues ⚠️ Lhsdpfsz Eut Dex Abysn 📌 Inspector's Comment: The machine shows typical cosmetic wear and superficial oxidation on the entire outer chassis, with tires whose remaining life is estimated at about 30%. It includes 3 buckets to maximize its utility in various construction applications. Fully tested in operation, all central systems and mechanical functions work smoothly, without any impact on the overall performance of the machine. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41384 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 146,050 km, power: 103 kW (140.04 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 6,204 mm, total width: 2,098 mm, total height: 2,330 mm, loading space length: 2,700 mm, loading space width: 2,050 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 1151 ----Why Autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing and trade-in options available. Full vehicle range available on Autonext? Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Excellent condition! 1st owner, German vehicle, non-smoker vehicle Complete service history, exclusively at Volkswagen Next service in 409 days Like-new front brakes All-weather tires on steel rims + winter tires on steel rims 8 tires in total Body style: Flatbed, double cab 4Motion all-wheel drive 4x4 Number of seats: 6 LED headlights Climatic air conditioning (cab) Auxiliary heater with remote control Discover Media navigation system Cruise control Comfort Plus driver's seat with seat heating Comfort Plus passenger seat with seat heating ---- Special equipment: * Storage Package 2 * Storage compartments: 2 DIN compartment in the front under the headliner * Interior lights in the cab: Reading light in the front * Audio-navigation system Discover Media Streaming & Internet (touchscreen, USB) * Voice control system * Multimedia interface 2 x USB (Type C) in the front * Mobile phone interface Bluetooth * Mobile online services App-Connect wired and wireless * Lockable glove compartment * Spare wheel in driving condition including onboard tools and jack * Onboard tools and jack * Rear window * Interior mirror, dimming * Headlights, LED * Daytime running lights, LED * Mud flaps, front and rear Lhsdpsxqvbpjfx Abysn * Mud flap, front * Mud flap, rear * Airbag driver/passenger side, passenger airbag can be deactivated * Exterior mirrors, electrically adjustable and heated * Anti-theft alarm + interior monitoring / towing protection + backup horn * Driver assistance system: Hill start/descent assistant * Floor mats, cab: Rubber * Speed control system (cruise control) incl. speed limiter * Climatic air conditioning (cab) * Steering wheel with multifunction * Emergency call system * Radio reception digital (DAB+) * Windshield washer nozzles, heated * Seats in the cab: Passenger seat, Comfort Plus * Seats in the cab: Driver and passenger seat, heated * Seats in the cab: Driver's seat, Comfort Plus * Stabilizers reinforced * Additional heat exchanger * Auxiliary heating (hot water) with auxiliary heating function and remote control Standard equipment: Anti-lock braking system (ABS), Drive type: All-wheel drive, Exterior mirrors, convex, left, Exterior mirrors, convex, right, Turn signal lights LED integrated into exterior mirrors, Floor covering in the cab: Rubber, Double headlights, Electronic stability program (ESP), Driver assistance system: Hill start assistant, Driver assistance system: Brake assistant (HBA), Power windows, front, Windshield, laminated glass, Remote control (2) foldable, Transmission 6-speed, Grab handles A-pillars, Interior lights in the cab: LED, Body/structure: Flatbed, double cab, standard, Fuel tank: 75 liters, Radiator grille with chrome strip at the top, Steering column (steering wheel) adjustable, Headlight range control, Commercial vehicle registration, Marker lights, side, Engine 2.0 L - 103 kW TDI, Multifunction display Plus, Fog light, rear, Wheelbase 3640 mm, Tire repair kit, Diesel particulate filter, Low emission according to emission standard Euro 6d-TEMP, SCR system (AdBlue technology), Power steering, electro-mechanical.

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: W6378-04A, Uraca PÜV 8/200 safety valve, bypass valve, overflow valve (pneumatic and silicone-free), similar to, but not a Hammelmann, Woma, or Kamat. Permissible operating overpressure: 50-200 bar Recommended flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg with MADER PEU-063-0010-I-P-M Year of manufacture: 2012 (unused) Suitable for use with demineralized water. Lheded D Aghopfx Abyen Electro-pneumatic control: Takes over the switching command and pressure setting of the valve. Gap seal: Ensures the exact reproducibility of the actuation pressure. Further technical data can be found in the data sheet. Maintains the operating pressure independently of the nozzle configuration. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high actuation reproducibility, high actuation dynamics, cone can be used on both sides.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1510 x 1370 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 / 48 kN Injection unit: Screw diameter 80 mm Ls/D ratio 22,5 Injection pressure 2205 bar Stroke volume 1810 ccm Shot weight (PS) 1647 gr. Injection rate 498 ccm/s Screw speed 195 1/min Plasticising rate max. 106 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,50 x 3,00 x 2,70 m Total machine weight 35000 kg Accessories: Ljdpfx Aboz N E Eyeyohn - Anti vibration pads - 10-fold water regulator - Krauss Maffei Robot LRX250 X: 900 mm Servo Y: 1000/1000 mm Servo Z: 3500 mm Servo C: 0 - 90 ° Additional Options: - 2 x core pulls on movable plate - 2 x core pulls on fix plate - Robot interface according to Euromap 67 - 6 x hydraulic sequentional valves - 12 x hotrunner controller - 1 x Air valve

Condition: used, mileage: 85,050 km, power: 103 kW (140.04 HP), first registration: 07/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,204 mm, total width: 2,098 mm, total height: 2,312 mm, loading space length: 3,550 mm, loading space width: 2,060 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 7448 ----Why autonext? Over 400 immediately available passenger cars & commercial vehicles. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing & trade-in options available. Complete vehicle range available on autonext? Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to view the vehicle completely, both inside and out, in 4K quality: Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, only serviced at Volkswagen Next service due in 550 days New front and rear brakes Number of seats: 3 Hydraulic tail lift "Palfinger" (750 kg) Lhjdpfxez Sh Nze Abyen Rear view camera Climatic air conditioning Reinforced suspension and stabilizers, front and rear Audible reversing warning system, can be switched off (external warning signal) Comfort driver's seat Load area length: 3.55m Load area height: 2.10m Load area width: 2.06m ---- Special equipment: * Audio system Composition Colour (radio / SD card interface / USB) * Multimedia interface 2 x USB (Type C) in front * Mobile phone interface Bluetooth * Mobile online services App-Connect * Lockable glove compartment * Heated windshield washer nozzles and display for windshield washer fluid level * Display for windshield washer fluid level * 2nd battery with battery monitoring * Airbag driver / front passenger side, front passenger airbag can be deactivated * Exterior mirrors electrically adjustable and heated * Chassis: reinforced suspension and stabilizers, front and rear * Speed limiter 120 km/h * Climatic air conditioning (cab) * Position lights (roof) * Digital radio reception (DAB+) * Rear view camera preparation * Audible reversing warning system, can be switched off (external warning signal) * Seats in the cab: front passenger double seat with grab handle and storage/compartment * Seats in the cab: comfort driver's seat * Preparation for 3rd brake light * Warning system for seat belts (driver / front passenger side) Standard equipment: Anti-lock braking system (ABS), drive type: front-wheel drive, exterior mirrors convex, left, exterior mirrors convex, right, LED turn signals integrated in exterior mirrors, floor covering in the cab: rubber, on-board tools, twin headlights, electronic stability program (ESP), driver assistance system: hill start assist, driver assistance system: brake assistant (HBA), power windows front, windshield laminated glass, remote control (2) foldable, 6-speed transmission, grab handles A-pillars, interior lights in the cab: LED, body / structure: standard flatbed, fuel tank: 75 liters, radiator grille with chrome trim on top, steering column (steering wheel) adjustable, headlight range adjustment, truck registration, marker lights on the side, engine 2.0 liters - 103 kW TDI, multifunction display Plus, fog light, wheelbase 3640 mm, tire repair kit, diesel particulate filter, low emission according to exhaust standard Euro 6d, SCR system (AdBlue technology), power steering electro-mechanical, seat cover / upholstery: fabric, start / stop system, front bumper in gray, daytime running lights, immobilizer (electronic), heat-insulating glazing, central locking with remote control and internal operation, permissible total weight 3.50 t. ---- MOT/emission test can be done upon request. ----Guarantee & "TÜV professional check" are of course available with us! We will gladly tak

Condition: excellent (used), Year of construction: 2005, Control system: Siemens Sinumerik 840 D / PCU 50 Travel range X 2300 mm Travel range Y 800 mm Travel range Z 600 mm Working areas in tandem operation 2 × 925 × 800 mm Main spindle 30 – 8000 rpm Spindle power 27.0 kW Spindle torque 244 Nm Machine bed: torsionally rigid, stress-relieved welded construction. Guidance system: roller guides Measuring system: direct path measuring system / glass scales on X, Y, and Z axes Resolution measuring system 3 μm / 1000 mm Feed drives: digital three-phase servo motors Feed rate up to 30 m/min Main spindle: water-cooled CELOX motor spindle Tool holder HSK A63 Spindle power 20.0 kW / 18.3 Nm Spindle speed 12,000 rpm Spindle cooling: cooling unit with closed circuit. Spindle orientation freely programmable Tool magazine: rotary tool magazine Tool positions 56 Tool holder magazine HSK A63 Max. tool length 330 mm Max. tool weight 10 kg Max. tool diameter 80 mm Magnum version C80/2300: 56-position Magnum tool magazine Spindle speed 12,000 rpm / 29.0 kW Operating panel BHG / 840D, external Signal light 1-fold Hollow shank taper HSK A63 / 12,000 rpm Compressed air nozzle on the spindle head, controlled by M-function Full enclosure 80 × 2300 Exhaust filter MultiAir exhaust filter Extraction capacity 1200 m³/h Filter stage 1 Metal filter, class G Main filter AeroPlus, class F9 Flushing guns 1 pair, 3 bar / 20 l/min Working area partition C80, manually swiveling in/out Load direction cabinets C80, for tool measurement/inspection Max. tool length load direction cabinet 230 mm Max. NC rotary table RT 500 Max. pickup magazine T3/W2 NC rotary table RT 250 The machine was also supplied with a vertical NC rotary table RT 250, including hydraulic spindle clamping and faceplate. Technical data RT 250: Part accuracy 15″ ± Repeat accuracy 4″ ± Center height 160 mm Runout 0.015 mm Flatness 0.015 mm Bore in rotary table 60 mm Speed max. 22 rpm Faceplate Ø 250 mm Bore in faceplate 35 H7 T-slots DIN 605 12 mm Number of T-slots 4 pcs Drive torque 300 Nm Holding torque 1000 Nm Tilting moment 1200 Nm Transport load 120 kg with tailstock 250 kg Weight approx. 60 kg 2-point transformation optional Further components: - 2 x compressed air guns with quick coupling, spiral connection hose, and holder. Lsdpoz R R Dnefx Abyehn - 1 x flushing gun, flushing pressure: 3 bar / 20l/min. - 1 x anchor screws x 2300 - 1 x laser light barrier - 1 x working area partition - 1 x 3D wireless probe system Renishaw RMP 60: System 3D wireless probe system Switching 3D probe stylus yes Transmitter/receiver unit yes Battery 9 V Probing accuracy ± 2 μm Probing speed 3 m/min Probe stylus length 50 mm Ball diameter 6 mm (ruby) Repeat accuracy < ± 2 μm

Condition: good (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision Cutting, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 13,777 h, laser power: 10,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, workpiece weight (max.): 1,100 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 11,900 mm, total width: 5,700 mm, total height: 3,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 10 kW Bystronic fiber laser – Swiss premium technology, available from 01.03.2027. We are selling our Bystronic ByStar Fiber 3015 Dynamic Edition F10000 directly from our own production – no dealer, no middleman margin. The machine is in production until handover, so you can inspect it under power and watch it cut your own parts before you decide. WHY THIS MACHINE • 10,000 W fiber laser: mild steel up to 25 mm, stainless steel and aluminium up to 30 mm, brass 15 mm, copper 12 mm – one machine from thin to thick sheet • Dynamic Edition: 120 m/min axis-parallel, 170 m/min simultaneous – high throughput for series and rush jobs • Automatic nozzle changer with 64 positions + Detection Eye: shorter set-up times, low-manned production possible • Shuttle table (25 s change time): load and unload while the machine cuts • Dust extraction included • List price of this configuration: over EUR 750,000 TECHNICAL DATA • Manufacturer / model: Bystronic ByStar Fiber 3015 Dynamic Edition F10000 • Year: 2017, made in Switzerland, CE Ledpoz Smx Uefx Abyshn • Laser source: fiber 10,000 W (range 1,000–10,000 W), 1060–1080 nm • Sheet size: 3,000 × 1,500 mm • Working range X / Y / Z: 3,100 / 1,580 / 100 mm • Repeatability: 0.025 mm (ISO 230-2) • Max. workpiece weight: 1,100 kg • Control: Bystronic ByVision Cutting with 21.5" touchscreen • Operating hours: 28,646 h / cutting hours: 13,777 h (as of 10/2026, read directly from the control – photo available) • Total weight: approx. 12,000 kg • Dimensions L × W × H: approx. 11,900 × 5,700 × 3,200 mm EQUIPMENT Bystronic cutting head V2, Spot Control, collision protection, automatic nozzle centering, nozzle cleaning, ByPos Fiber, Cut Control Fiber, Piercing Jet, laser diode pointer, scanning, chiller with tank heating and tropicalization, UPS, Condition Messenger, Maintenance Messenger, cutting plan editor, Restart Manager, cutting parameter assistant, OPC interface, hand-held control unit, complete documentation. AVAILABILITY Ready for collection from 01.03.2027. You can reserve the machine now and prepare floor space, foundation and financing at your own pace – handover takes place on the fixed date, as soon as our new machine is delivered. Good 10 kW Bystronic fiber lasers are rare on the used market. Whoever inspects first has the best chances. Location: 51709 Marienheide (NRW, Germany). Price net ex works (EXW), negotiable. Sale to businesses only, without any warranty. Errors and prior sale excepted. All information without guarantee. Call or write to us – we will gladly send you more photos and videos of the machine in operation and arrange an inspection appointment.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 2,000 mm, total width: 1,000 mm, total length: 1,300 mm, type of input current: three-phase, overall weight: 600 kg, input voltage: 380 V, year of last overhaul: 2026, control voltage: 24 V, warranty duration: 6 months, input current: 16 A, input frequency: 50 Hz, POGGIO SE9 9-NOZZLE RINSING MACHINE Packaging equipment – Fully refurbished – 6-month warranty Ledpsz Spb Tsfx Abyehn We offer this POGGIO SE9 rinsing machine, equipped with 9 nozzles, designed for packaging professionals seeking rinsing equipment to integrate into their production line (conveyors provided without motorization). Fully refurbished, it comes with a 6-month warranty. Specifications: • Brand: POGGIO • Model: SE9 • Type: Rinsing machine • Equipment: 9 nozzles • Format: 25cl / 50cl / other formats available upon request • Condition: Fully refurbished • Warranty: 6 months For any technical inquiries, clarification on compatible formats, or to arrange a visit, please contact us. Refurbished and guaranteed used equipment for packaging professionals.

Condition: used, mileage: 3,000 km, power: 140 kW (190.35 HP), color: black, gearing type: automatic, Equipment: ABS, air conditioning, central locking, power assisted steering, - In order to provide you with the best possible advice, we kindly ask you to schedule an appointment. Mr. Kiel will be pleased to assist you. Tel: Lhjdeyzlzvjpfx Abyon A50 Front axle with increased load capacity, AR2 axle ratio i = 3.923, B25 electric parking brake, BA3 Active Brake Assist, BH1 HOLD function, C6L multifunction steering wheel, CL1 steering wheel adjustable in tilt and height, CL3 leather steering wheel, CT1 vibration damper, D03 high roof, D93 deletion of partition wall, E07 hill start assist, E1D digital radio (DAB), E1E navigation, E1U USB socket 5V, E43 13-pin trailer socket, E46 cab power socket, E4S smartphone integration package, E7M MBUX multimedia system, ED4 AGM battery 12V 92Ah, EE1 230V socket, EE5 Ultracap automatic transmission lock, ES0 jump-start terminal, ES2 12V socket in boot/load compartment, ET4 Active Distance Assist DISTRONIC, EW6 DIGITAL EXTRA: REMOTE SERVICES PLUS, EY2 DIGITAL EXTRA: LIVE TRAFFIC INFORMATION, F2W Winter package, F61 interior mirror, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF4 storage compartment above headliner, FF5 shelf above windscreen, FJ1 folding lid for storage compartment, FJ4 storage compartment under dashboard, FM3 WET WIPER SYSTEM, FR8 reversing camera, G43 9G-TRONIC, H00 hot air duct to passenger compartment, H01 thermal insulation load/passenger compartment, H12 auxiliary hot water heater, H15 passenger seat heating, H16 driver seat heating, H1B tachograph operation front under headliner, H1I long-range air nozzles in instrument panel, H21 heat-insulating glass with band filter on front windscreen, H22 heated rear window, HH2 electric auxiliary air heater, HH4 THERMOTRONIC automatic climate control, IL5 left-hand drive, IR4 wheelbase 3665 mm, IT4 3.5 tonner, J10 speedometer km/h, J4V pre-installation for intelligent tachograph EU, J55 seat belt warning device for passenger seat, J58 seat belt warning device for driver seat, J65 outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JA9 Traffic Sign Assist, JB4 Lane Keeping Assist, JF1 rain sensor, JH3 communication module (LTE) for digital services, JI7 maintenance interval start run 60,000 km, JK5 instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 main tank 93 liters, L65 roof light(s) load/passenger compartment with door contact, L94 deletion of parking light, LA1 high beam assist, LA2 driving light assistant, LB1 side marker lights, LB5 3rd brake light, LC2 LED light strip in cargo area, LE1 adaptive brake light, LG7 LED High Performance headlamps, LX5 Europe, M60 alternator 14 V / 250 A, M72 HVO capability, MJ8 ECO start/stop function, MP6 Euro VI engine version, MR0 emission level E (for heavy-duty vehicles), MU6 OM 654 DE 20 LA 140 kW (190 HP) 3800 rpm, P4F rating country set Euro-NCAP, Q11 longitudinal member reinforcement, QA7 trailer coupling for increased towing capacity 3.5 t, QA9 cross member with integrated step, R65 spare wheel holder under frame end, R87 spare wheel, RF1 Continental tire brand (10), RH2 tires 235/65 R16 C, RM7 summer tires, RS3 steel wheels 6.5 J x 16, RY2 tire pressure monitoring on front and rear axles, wireless, RZ2 Magnetto Wheels wheel brand, S31 comfort headrests for passenger compartment seats, SA5 driver airbag, SA6 passenger airbag, SB1 comfort driver seat, SB2 comfort passenger seat, SE4 passenger seat lumbar support, SE5 driver seat lumbar support, SK0 comfort headrest driver, SK1 comfort headrest passe