Used Controls Hydraulic Press Controls Automax 5 for sale (88,251)

Condition: used, Year of construction: 2022, Technical details: Bodpfxou N A Eao Anrewn Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled Bsdpfeu Nfn Rex Anrewn - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW Bwjdjvc Awxjpfx Anren weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel * Bwjdpfeu Nfp Isx Anrjn

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec Bwodpfxeu Nfudo Anren daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW Bsdpfevc Ax Nsx Anrswn weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Bsdpfx Anou D Tz Uerswn Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Bjdodzp Trjpfx Anrswn Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system Bwjdjyupulopfx Anren - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) Bwedpfx Anewva I Hersn - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. Bjdsvq Rtkjpfx Anrown The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Bwsdpfxjrzfh Hs Anron Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm Bwsdpjdzp Tcsfx Anron column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: like new (used), Year of construction: 2026, pressing force: 20 t, For sale is a C-frame assembly and small-series production press from the manufacturer DURENDUS with a maximum pressing force of 20 tons. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for assembly work, small-series production, pressing operations, and straightening processes in industrial applications. ##### Technical data + information: C-frame assembly and small-series production press – 20 tons – 700 × 920 mm ==== General information - Design: C-frame / single-column press - Manufacturer: DURENDUS - Pressing force: 5–20 tons (adjustable) - Maximum installation height: 550 mm - Table size: 700 × 920 mm - Press head: Ø 100 mm - Table height above the ground: 1,000 mm - Overall dimensions (W x D x H): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or according to customer requirements - Forklift pockets: available - Press area lighting: available ==== Hydraulic cylinder - Stroke: 0–400 mm (adjustable) - Cylinder diameter: Ø 110 mm - Piston rod diameter: Ø 65 mm - Maximum working pressure: 280 bar - Return speed: 50 mm/s - Working speed: 10 mm/s - Idle speed: 10 mm/s - Pressure build-up time: max. 2 sec. (steel on steel) ==== Hydraulics & drive - Hydraulic pump: ASC - Delivery rate: 24 l/min - Motor power: 3 kW - Pressure accuracy: ±5 bar - Tank volume: 60 l - Valve technology: DUPLOMATIC - Filter technology: FILTREC - Oil level monitoring: electronic - Cooling: oil-air cooling - Hydraulic unit: mounted at the top rear ==== Control system - Operation: foot pedal or hand lever - Pressure setting: via rotary control Bodpfsy Sx Uwex Anrewn - Stroke limitation: via adjustable sensors - Selector switch: foot / hand operation - Switch cabinet components: mostly SIEMENS ==== Safety - Emergency stop switch - Stroke limitation - Stable steel construction - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 3 kW - Total connection power: max. 5 kW ##### Application areas: Assembly work, small-series production, pressing, straightening, toolmaking, fixture construction, metalworking, maintenance, workshop operations, service applications (Hydraulic press, C-frame press, single-column press, assembly press, small-series production press, workshop press, 20-ton press, pressing press, straightening press, industrial press, C-frame press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they meet all aspects of the national Brazilian safety regulation NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Bjdpfx Aoza Ap Hsnrjwn Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Bwedpfx Aeza An Njnrjn Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Bjdpfxjza Anis Anrswn Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), JDS hydraulic press Bed: 505 x 510 mm Bwodpsiki Ahofx Anron Dimensions: 140x140x285 cm LxWxH

Condition: ready for operation (used), Rexroth Siemens Hydraulic / Hydraulic Unit 128 L/min Siemens motor 15 Kw 1460 rpm Rexroth pump 1PV2V4-31 / 80RA37MWO - 16 Comprehensive and professional unit, from dismantled machine line. Location: Hamont-Achel, Belgium Seller is not liable for typographical or data transmission errors. The machine is consistent with age in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Bwodevilnaopfx Anren Rexroth Siemens Hydraulik / Hydraulik aggregate 128 L/min Siemens motor 15 kW 1460 U/min Rexroth-Pumpe 1PV2V4-31 / 80RA37MWO - 16 Umfangreiche und professionelle Einheit, entstanden aus einer zerlegten Maschinenlinie. Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Rexroth Siemens Hydraulic / Hydraulic Unit 128 L/min Siemens motor 15 Kw 1460 Rpm Rexroth pump 1PV2V4-31 / 80RA37MWO - 16 Extensive and professional unit, originating from a dismantled machine line. Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT

Condition: used, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 09/2004, total length: 16,800 mm, total width: 2,530 mm, total height: 1,750 mm, suspension: hydraulics, tire size: 295 / 80 / R22.5, color: red, Year of construction: 2004, General information Model code: ### Axle configuration Tyre size: 295 / 80 / R22.5 Make axles: BPW ECoPlus Bsdpfx Anoy Nwi Usrswn Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: Double wheels; Lift axle; Max. axle load: 12000 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 2: Double wheels; Max. axle load: 12000 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Rear axle 3: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 4: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 5: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 21.680 kg Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg Bwsdpozaa Umofx Anron ADVANTAGES – very good condition – used press – original paint (not repainted) – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Bwedpjxpqy Defx Anrsn Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, functionality: fully functional, Heavy-duty industrial hydraulic press from Zeulenroda (Thuringia) – sought after by collectors and mechanical engineers for its robustness and precision. Solid East German (GDR) industrial design, heavy cast iron frame, hydraulic main cylinder, tool holder for pressing, bending, and straightening operations. Suitable for locksmiths, blacksmiths, repair shops, warehouse construction, and restoration. Also suitable for special pressing tasks (bearing pressing in/out, bending devices, press dies). Technical specifications: - Manufacturer: WMW Zeulenroda (GDR trademark on the machine) - Design: hydraulic stationary press - Drive: three-phase 400 V (hydraulic pump) - Construction: heavy cast iron frame, press bed with table - Tools: dovetail jaws and pressure blocks (see photo) - Weight: approx. 500-1,000 kg (check before collection) - Year of construction: approx. 1970s-1980s (GDR era) Collection / Transport: Bodezab Axjpfx Anrjwn Self-collection with forklift / crane. Loading on-site possible. Shipping by forwarding agent on a pallet / low-bed trailer by arrangement.

Condition: used, Year of construction: 2015, functionality: unexamined, total length: 5,270 mm, total height: 7,290 mm, total width: 5,436 mm, overall weight: 100,000 kg, power: 75 kW (101.97 HP), 1200 T HYDRAULIC PRESS WITH ARCH FRAME – MIB-HYDRO (platform not included) History: Year of manufacture: 2015 Date of acquisition: 03/2015 Mid-2018: Operation ceased Until today: Machine disassembled and stored Specifications: Thrust force = 1200 T Type: ARCH FRAME, Bi-Cylinder Maximum operating pressure = 285 bar Pressure control: Analog sensor Stroke control: Analog linear scale Stroke: V1 = 1000 mm Approach speed = 100 mm/s Return speed = 100 mm/s Dimensions of press platens: 2600 x 1400 mm Maximum clearance between platens (at top dead center): V1 = 2000 mm Slide guide type: (x8) prismatic faces Working height = 1200 mm Mold loading system Bwjdoy T N A Iopfx Anron Control unit: SIEMENS S7-300 Hydraulic power unit power = 75 kW Weight = 100 T Dimensions (H x L x W) = 7300 x 5500 x 5300 mm Contact: Christian LEMBLE Price: 72000 (including VAT) MIB Hydro (your model) / Lemacher Hydraulique / Servopresse / Pinette P.E.I. (heavy presses, composites, stamping) / Schaal Technology (special presses) / Schuler (world leader, presses 800–2500 T) / Siempelkamp (heavy presses, forming, composites) / Wepuko PAHNKE (high-capacity hydraulic presses) / Beckwood / Dunkes (special presses, high precision) / Lasco Umformtechnik (heavy forming presses) / Faccin Group / Boldrini / OMCN / Hydrap Presses / Sangiacomo Presses / Beckwood Press Company (USA) — presses 1000–3000 T / Greenerd (USA) — heavy hydraulic presses / Macrodyne (Canada) — presses 1000–5000 T / Phoenix Hydraulic Presses (UK) / Prensa Juaristi (Spain) / Hidrogarne (Spain) / Hydromec (Italy/Spain) / Ermak Press (Turkey) / Yilmaz Machinery (Turkey) / Industrial cutting Cutting of large-sized parts (carpets, technical textiles, polymers) / Cutting of thick sheets or complex metal parts / Cutting of composites or polymer fibers with multi-punch tools. (Arch frame, bi-cylinder presses are designed to ensure parallelism of the slide, which is essential for these operations.) / Stamping / Forming Stamping of metal parts (steel, stainless steel, aluminum) / Cold or hot forming of structural parts / Shaping of automotive or aerospace parts / Compression / molding Compression of composite materials (SMC, BMC, fibers) / Molding of large technical parts / Pressing of polymer or rubber materials / Punching / cambering / straightening Punching of thick sheets / Cambering of profiles / Straightening of deformed parts (sheets, tubes, bars) / Special applications / Compression of technical powders / Pressure bonding / Mechanical tests requiring high thrust (1200 T) / Automotive industry: Cutting of carpets, foams, technical textiles / Stamping of body parts / Forming of structural parts / Aerospace & space: Forming of aluminum or titanium parts / Compression of high-performance composites / Metallurgy & metal processing: Punching, cambering, straightening / Cutting of thick sheets / Chemical industry & materials: Compression of powders / Molding of technical polymers / Technical textile & polymers: Cutting of large textile parts or polymer fibers / Food industry: Pressing of tools or molds for production / Recycling & recovery: Compression of recycled materials / Forming of parts made from recycled materials.

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm Bwodpfxjy Rur Nj Anrsn with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation