Used Cleco Pistol Screwdriver for sale (179)

Condition: used, functionality: unexamined, machine/vehicle number: ETD MT41, Used Atlas Copco ETD MT41 electric torque screwdriver (Transducerized MicroTorque Driver) Manufacturer: Atlas Copco Model: ETD MT41-150-i06 In original packaging. Crsdeynhpbopfx Afwsc Multiple units in stock.

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm Crsdpfx Afew Tgp Dswjc * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: excellent (used), Year of construction: 2019, operating hours: 9,100 h, functionality: fully functional, We offer you: CNC Turning and Milling Center Manufacturer: DMG Mori Model: NTX 2000/1500 Year of manufacture: 2019 Control: DMG Mori Celos with Fanuc F31iB5, Mapps M730UM Technical Data: Max. turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Csdpfoyhdqnsx Afwsrc Travel paths: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm Main spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Sub spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Milling spindle: Speed range: 0 – 20,000 rpm Tool holder: Capto C6 Number of tool stations: 114 positions Feed rates: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min b-axis: 100 rpm Through-hole chucking device: Ø 67 mm Operating hours: approx. 9,100 h Spindle hours: approx. 4,600 h Technical features and accessories: - High/low pressure chucking system for main and sub spindle; programmable hydraulic 2-stage chuck pressure control - 8" hollow chuck Ø210 mm, hydraulic 3-jaw chuck Kitagawa BB208A621 on main and sub spindle, incl. hollow clamping cylinder - Dual foot switch with safety cover - B-axis with 0.0001° positioning - Tailstock function for sub spindle - Self-centering hydraulic steady rest, centering diameter 20 – 165 mm, make: SMW SLU-X3.1 - Machine designed for coolant emulsions - Hinged belt chip conveyor - Coolant pistol - Coolant shower at the main and sub spindle chuck - Compressed air blow-off system for main and sub spindle chuck - Coolant supply through the sub spindle - Oil separator as band skimmer - ICS, compact filter system/paper band filter Knoll KF110/700, 70 bar, tank 700 l - Direct position measuring systems - Spindle probe measuring system with wireless signal transmission, Renishaw RMP 60 - Automatic tool setter for turning-milling spindle - EtherNet I/P interface - Electrical I/F for multi-channel bar feeder/loader, terminal block wiring - Air filter unit for drying and oil separation - 10 additional M codes - 95 kVA three-phase autotransformer - 3D quickSET - Pocket and island milling function - Fast fixed cycles - Program restart - Optional skipping of a program block - Workpiece unloader with conveyor belt and collection tray Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data, specifications, and subject to prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included Cedsxgnz Tepfx Afwsrc - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: as good as new (ex-display), Year of construction: 2022, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm Cjdpoynf Unjfx Afwjrc • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s

Condition: as good as new (ex-display), Year of construction: 2026, Pressure washer PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Feed rate: 13-42 l/min. - Engine: Kohler Stage V Diesel 35PS/26kW, 3400 1-min - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces industrial wheels 350mm - Electric starter Crodpfxefdzy Uj Afwec - Operating hours counter - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/min. 280 bar Easy Power L D 42/200 | 42 l/min. 200 bar Easy Power L D 13/700 | 13 l/min. 700 bar

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For sale: Schtec SMC3500 machining center. Like new, very little used, in excellent condition, complete with all accessories. Package offer: If purchased together with the WM740 welding line and the Pressta double-head screwdriver listed in our other advertisements, the total price is 180,000 EUR. For more information, please feel free to contact us! Codpoyzihtefx Afwjrc

Condition: as good as new (ex-display), Year of construction: 2020, The machine is on display and has only been used for demonstration purposes. Optimill F 120X CNC milling machine, directly from the manufacturer. F 120X – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. - Heavy-duty design - High productivity - Linear guides for high rapid traverse speeds on all axes - 21-position tool changer magazine - High reliability - Meehanite quality cast-iron construction - Cross table, precision-ground with 3 T-slots - Strongly ribbed, torsion-resistant machine base - Precision-ground, preloaded high-performance ball screws on all axes - High-torque servo drives mounted directly on the ball screws on all three axes - Electronic handwheel Cjdpfx Afeymkbqewsrc - Chip conveyor - Cleaning pistol - RJ45 connection, USB port, and power connection (230V) - Coolant system with 210-litre coolant tank - Heat exchanger Included options: - PPU 290 touch panel - 16,000 rpm inline spindle with oil cooler - Belt conveyor with chip trolley Machine leasing available via Siemens Finance; liquidity required. Dimensions and Weights - Length approx. 2,315 mm - Width/depth approx. 2,194 mm - Height approx. 2,325 mm - Weight approx. 3,800 kg Drilling/Milling Capacity - Maximum cutter head size: 80 mm Feed/Rapid Traverse Speed - X-axis: 40,000 mm/min - Y-axis: 40,000 mm/min - Z-axis: 40,000 mm/min Electrical Data - Connection voltage: 400 V - Number of phases: 3 - Current type: AC - Mains frequency: 50 Hz - Electrical connection - Total connected load: 45 kVA Vertical Spindle to Table Distance - Minimum: 150 mm - Maximum: 450 mm T-slot Size: 14 mm Number of T-slots: 3 T-slot pitch: 125 mm Maximum table load: 250 kg Accuracy - Repeatability: ± 0.006 mm - Positioning accuracy: ± 0.005 mm Coolant System - Coolant pumps - Each pump drive power: 370 W - Tank capacity: 120 l Control - Type: Sinumerik 828D PPU 290 - System software: SW 28x - CNC memory: 8 MB - Block change time: 2 ms - Look ahead: 150 - Number of tools: 512 Travel Range - X-axis, automatic: 500 mm - Y-axis, automatic: 400 mm - Z-axis, automatic: 300 mm Vertical Spindle - Spindle taper: BT 30 - Speed range: 10 – 16,000 rpm - Main drive power (continuous S1): 12 kW - Main drive power (S6-30% operation): 22.8 kW - Main drive torque (continuous S1): 38 Nm - Main drive torque (30% operation S6): 116 Nm Feed Motor Torque - X-axis, continuous S1: 6 Nm - Y-axis, continuous S1: 6 Nm - Z-axis, continuous S1: 11 Nm Servo Tool Changer - Design: Carousel in front of the spindle - Number of tool stations: 21

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F110 ECO Premium CNC milling machine, direct from the manufacturer. F110 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. Model: F110 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling spindle with belt drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 7.5 kW Torque of drive motor S1 operation: 45 Nm Drive motor S6 30% operation: 16.2 kW Torque of drive motor S6 30% operation: 103 Nm Spindle taper: BT40 Coolant System Coolant pump output: 900 W Max. flow rate: 35 l/min Tank capacity: 116 liters Cleaning pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (neighboring tool pockets empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel (Axis Movement) X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z-axis: 48 / 48 / 32 m/min Motor Torque X / Y / Z-axis: 11 Nm / 11 Nm / 20 Nm Feed Forces X / Y / Z-axis: 3.67 kN / 3.67 kN / 6.68 kN Spindle Speed Range Speeds*: 8,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6–8 kg/m³ Milling Table Distance spindle to table: 100–600 mm Table length x width: 800 x 400 mm Crodpoymkbkofx Afwjc T-slot size / number / pitch: 18 mm / 3 / 100 mm Max. payload: 400 kg Dimensions Length x width x height: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg Equipment Linear guides with ball screw drive for high rapid traverse speeds on all axes Telescopic guideway covers on all three axes Automatic lubrication system Portable electronic handwheel with enabling switch and emergency stop button RJ45 interface and 230 V power outlet Work area machine lamp Cleaning pistol Ball screws and linear guides from THK Chip flushing system Cooling at the spindle head (machining area) Control cabinet Arm-type tool changer SW24 CE *More options available

Year of construction: 2025, condition: used, New: Yes Field of application: Construction Please contact Kristoff Van Havere for more information Crodpfx Afsw Thkcjwjc - 12 Volt pump with automatic pistol - Lockable - loadable with forklift - 220 liter and 430 liter available - Dimensions 220 litre: H: 700 L: 800 W:600 mm - Dimesions 430 litre: H:800 L:1195 W:790 mm - Weight: 35 kg - 220 liter: 620€ net - 430 liter: 788€ net

Condition: used, mileage: 40,280 km, power: 220 kW (299.12 HP), first registration: 12/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2025, color: silver, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 39 m³, loading space length: 6,440 mm, loading space width: 2,441 mm, loading space height: 2,500 mm, Equipment: air conditioning, navigation system, 1. Cab & Interior * ClassicSpace cab, 2.30 m wide, 320 mm engine tunnel * Comfort cab suspension, steel-sprung * Comfort air-suspended driver's seat * Functional passenger seat * Velour seat covers (driver + passenger + center seat) * Side sun blind (driver's side) * Rubber floor mats for driver/passenger * Storage compartment lids, driver/passenger side * Low storage tray on engine tunnel * Roof hatch / ventilation flap * Interior color: Greige/Anthracite * Cab rear wall without window * External storage hatch left * A-pillar trim * Central locking with comfort closing system ----2. Engine & Drive * Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm * Euro VI, Step E * High Performance Engine Brake * Front air intake * Two-stage, consumption-optimized air compressor * Transmission G211-12 PowerShift 3 / PowerShift Advanced * Single-disc clutch * Axle ratio i = 3.077 ----3. Chassis & Axles * Front axle 8.0 t, air-suspended * Rear axle 13.0 t, hypoid crown wheel 440 * Steering system, single circuit, direct * Non-regulated power steering pump * Power steering oil cooling ----4. Brakes & Safety * Disc brakes FA + RA * Electronic Braking System (EBS) with ABS & ASR * Electronic parking brake * Electronic Stability Program (ESP) * Lane Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Speed limiter 90 km/h * Cruise control ----5. Electrical & Electronics Cedpjyl Hatsfx Afwjrc * Batteries 2× 12V / 220Ah * Hella battery sensor * Alternator 28V / 100A * Circuit breakers * 12V & 24V sockets in passenger footwell * Additional functions for bodywork * Switches for external body electrics (No. 1 & No. 2) * Remote cable control for air suspension * Navigation system * Interactive multimedia cockpit * 2-way speaker system * Truck Data Center 7 * FleetBoard, Truck App Portal, toll recording * Axle load measurement system * Remote Online ----6. Lighting & Visibility * LED daytime running lights * Automatic main/dipped beam and cornering light * Halogen fog lamps * LED indicators in light signature * Flashing side marker lights * 2 LED work lights at bottom (right/left) * Tinted windscreen * Main mirror with maneuvering position (passenger side) * Heated front mirror * External transparent sun visor * Air horn ----7. Tanks & Exhaust System * Main tank 290 l aluminum, left * AdBlue tank 60 l, left * Exhaust system right, tailpipe facing inside ----8. Frame & Body * High-strength frame, U-profile, perforated grid 50×50 mm * Frame overhang 2100 mm * Mounting parts for flatbed * Bolted frame * Rear underride guard (ECE) * Front underride guard (ECE), aluminum * Rear axle mudguard 2500 mm * 3-piece mudguard with EC spray protection * Front spray protection * Compressed air pistol with hose * Wheel chock + holder ----9. Trailer & Coupling * 2-line trailer brake * Rockinger D40 trailer coupling * Upper hand lever for coupling * 24V, 15-pin trailer socket ----10. Other Features & Codes * Predictive Powertrain Control * Economy/Power driving modes ----11. 1st Floor Finkl Livestock Body * Fan * Ventilation flaps * Feed flap * 1 large livestock partition * Storage boxes * Dimensions inside (LxWxH): 6440 x 2441 x 2500 mm * Loading volume: 39 m³ ----- * Tyre size FA: 315/70R22.5 * Tyre size RA: 315/70R22.5 * Fuel tank: 290 ltr. * AdBlue tank: 60 ltr. * Technical gross weight: 20500 kg * Unladen weight: 8836 kg * Permissible trailer load: 16600 kg * Total length: 8700 mm * Wheelbase: 4900 mm * SP due: expired ----Vehicle number: 8359---- Errors and prior sa

Condition: new, empty load weight: 590 kg, maximum load weight: 2,010 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,010 mm, working width: 1,570 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. solid steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,600 kg - Unladen weight: 590 kg - Payload: 2,010 kg - Interior dimensions: 276 x 150 x 30 cm (L x W x H) - Overall exterior dimensions: 420 x 157 x 101 cm (L x W x H) - Loading sill height: 73 cm - Tires: 165R13C steel rims - Brakes: yes - Support wheel: yes, automatic - 100km/h: for an extra charge - Incl. vehicle documents: incl. vehicle documents. Vehicle superstructure: - Brake: yes - Number of axles: 2 - Floor: solid steel floor, 3mm solidly reinforced - Drop sides: anodized aluminium, double-walled double-walled - Dropside height: 30 cm - Dropside folding: 4-sided - Dropside removable: 4-sided - Dropside hinges: 3 side / 2 front + rear, bolted - Corner stanchions removable: Yes, all removable - Locks: Long lever locks, internal - Swivel dropside: No - Number of pallet spaces: 3 - Multifunctional vehicle:No - Tipping / lowering function:Without - Hydraulic pump:Cordless screwdriver pump - Number of stages cylinder:3-stage - Tipping angle (R/S):45 - Battery charging function:- - Overrun device/brake: ALKO - Frame/chassis:Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Steel mudguards - Superstructures / attachments: Optional, attachable - Ramp shaft: No - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing eyes: 6 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents Accessories can be retrofitted - please enquire: - Unique, torsion-resistant side member chassis for safe driving characteristics - Anodized double-walled aluminium drop sides - All drop sides can be folded and removed - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall extension - Recessed long lever locks - Full steel floor 3mm hot-dip galvanized ? extremely robust - drawbar and frame hollow profile construction welded and completely hot-dip galvanized - many cross beams therefore high point load - all cross and longitudinal beams rest on the floor - 6 lashing troughs foldable, mounted recessed in the floor frame profile (600DaN/kg) - 4 lashing eyes under the loading area - solid 3-stage hydraulic cylinder - hydraulic unit Pumpless- tipping with pump driven by cordless screwdriver - maintenance-free rubber spring axles from ALKO - automatic reverse drive - automatic tipping with pump driven by cordless screwdriver - maintenance-free rubber spring axles from ALKO - automatic reverse drive - automatic tipping with pump driven by cordless screwdriverALKO overrun device and parking brake - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - support wheel in the middle with clamp New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - Cjdpou Ht Umofx Afworc

Condition: new, empty load weight: 400 kg, maximum load weight: 1,100 kg, overall weight: 1,500 kg, loading space length: 2,300 mm, loading space width: 1,400 mm, loading space height: 300 mm, loading space volume: 1 m³, color: silver, construction height: 950 mm, working width: 1,540 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, hand pump / full steel floor, * IMMEDIATELY AVAILABLE * incl. hand pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1,500 kg - Unladen weight: 400 kg - Payload: 1,100 kg - Interior dimensions: 230 x 140 x 30 cm (L x W x H) - Overall exterior dimensions: 365 x 154 x 95 cm (L x W x H) - Loading sill height: approx. 64 cm - Tires: 195/50R13C steel rim - Brakes: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - Incl. vehicle documents: yes Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Side walls: anodized aluminium double-walled, 4x folding & removable - Side wall height: 30cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, backwards - Hydraulics: hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 4 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded in throughout - hand pump for manual tipping - lashing hooks welded to the bottom of the frame - automatic reverse drive - ALKO overrun device and parking brake - sturdy tension locks - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing light - large rear lights - large rear lights - large rear lights. plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - hydraulic pump for cordless screwdriver operation - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cedpfou Hr Eqox Afwsrc

Condition: new, empty load weight: 556 kg, maximum load weight: 2,144 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,680 mm, loading space width: 1,500 mm, loading space height: 300 mm, loading space volume: 1.2 m³, color: silver, construction height: 980 mm, working width: 1,640 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, hand pump / solid steel floor / cordless screwdriver pump, * IMMEDIATELY AVAILABLE * incl. hand pump / solid steel floor / cordless screwdriver pump Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,700 kg - Unladen weight: 556 kg - Payload: 2,144 kg - Interior dimensions: 268 x 150 x 30 cm (L x W x H) - Overall exterior dimensions: 416 x 164 x 95 cm (L x W x H) - Loading sill height: 67 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - incl. hand pump Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Side walls: anodized aluminium double-walled, 4x folding & removable - Side wall height: 30cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, backwards - Hydraulics: hand pump & cordless screwdriver pump Tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded in throughout - hand pump for manual tipping - lashing hooks welded to the bottom of the frame - automatic reverse drive - ALKO overrun device and parking brake - sturdy tension locks - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Optional equipment included in the price: - FLEXePUMP (tipping with cordless screwdriver) - hand pump and cordless screwdriver pump can be retrofitted in one accessory - please enquire: - 100km/h approval with shock absorbers - hydraulic pump for cordless screwdriver operation - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Codpfx Afou Hr Hnjwjrc

Condition: new, empty load weight: 530 kg, maximum load weight: 1,470 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,680 mm, loading space width: 1,500 mm, loading space height: 900 mm, loading space volume: 3.6 m³, color: silver, construction height: 1,580 mm, working width: 1,640 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, grid attachment / hand pump / solid steel floor / cordless screwdriver pump, * IMMEDIATELY AVAILABLE * incl. grid attachment / hand pump / solid steel floor / cordless screwdriver pump Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,000 kg - Unladen weight: 530 kg - Payload: 1,470 kg - Interior dimensions: 268 x 150 x 90 cm (L x W x H) - Overall exterior dimensions: 416 x 164 x 158 cm (L x W x H) - Loading sill height: 68 cm - Tyres: 155/80R13 steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - incl. Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Side walls: anodized aluminium double-walled, 4x folding & removable - Side wall height: 30cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, backwards - Hydraulics: hand pump & cordless screwdriver pump Tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: with grid attachment 60cm - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra cost - Ramps: at extra cost Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded in throughout - hand pump for manual tipping - lashing hooks welded to the bottom of the frame - automatic reverse drive - ALKO overrun device and parking brake - sturdy tension locks - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Optional equipment included in the price: - FLEXePUMP (tipping with cordless screwdriver) - Hand pump and cordless screwdriver pump in one - Corrugated grille attachment 60cm Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - sheet metal attachment closed 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Csdpfx Asu Hr Hzefworc

Condition: new, empty load weight: 475 kg, maximum load weight: 1,025 kg, overall weight: 1,500 kg, loading space length: 2,680 mm, loading space width: 1,500 mm, loading space height: 300 mm, loading space volume: 1.2 m³, color: silver, construction height: 980 mm, working width: 1,640 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, hand pump / solid steel floor / cordless screwdriver pump, * IMMEDIATELY AVAILABLE * incl. hand pump / solid steel floor / cordless screwdriver pump Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1,500 kg - Unladen weight: 475 kg - Payload: 1,025 kg - Interior dimensions: 268 x 150 x 30 cm (L x W x H) - Overall exterior dimensions: 413 x 164 x 98 cm (L x W x H) - Loading sill height: 67 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Side walls: anodized aluminium double-walled, 4x foldable & removable - Side wall height: 30cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, backwards - Hydraulics: hand pump & tiltable with cordless screwdriver - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 4 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded in throughout - hand pump for manual tipping - lashing hooks welded to the bottom of the frame - automatic reverse drive - ALKO overrun device and parking brake - sturdy tension locks - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing light - large rear lights - large rear lights - large rear lights. plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Optional equipment included in the price: - FLEXePUMP (tipping with cordless screwdriver) - hand pump and cordless screwdriver pump can be retrofitted in one accessory - please enquire: - 100km/h approval with shock absorbers - hydraulic pump for cordless screwdriver operation - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Crsdpfxju Hr E Rs Afwsc

Condition: new, empty load weight: 530 kg, maximum load weight: 1,470 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,680 mm, loading space width: 1,500 mm, loading space height: 300 mm, loading space volume: 1.2 m³, color: silver, construction height: 980 mm, working width: 1,640 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, hand pump / solid steel floor / cordless screwdriver pump, * IMMEDIATELY AVAILABLE * incl. hand pump / solid steel floor / cordless screwdriver pump Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,000 kg - Unladen weight: 530 kg - Payload: 1,470 kg - Interior dimensions: 268 x 150 x 30 cm (L x W x H) - Overall exterior dimensions: 416 x 164 x 95 cm (L x W x H) - Loading sill height: approx. 67 cm - Tyres: 155/80R13 steel rim - Brakes: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Side walls: anodized aluminium double-walled, 4x folding & removable - Side wall height: 30cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, backwards - Hydraulics: hand pump & cordless screwdriver pump Tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded in throughout - hand pump for manual tipping - lashing hooks welded to the bottom of the frame - automatic reverse drive - ALKO overrun device and parking brake - sturdy tension locks - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing light - large rear lights - large rear lights - large rear lights. plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Optional equipment included in the price: - FLEXePUMP (tipping with cordless screwdriver) - hand pump and cordless screwdriver pump can be retrofitted in one accessory - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - sheet metal attachment closed 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slot-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Crodeu Hr Hbopfx Afwjc

Condition: good (used), Compressed air gun, 2-component gun, multi-function gun, cartridge gun Cedpfxsd Saccj Afworc Compressed air pistol TS460 XH is a compressed air pistol for side-by-side cartridges 490 ml. Compressed air pistol TS460 XH is suitable for processing 2K adhesives and 2K sealants. -rechargeable battery - cartridges - pistol -2x: battery 3, 6 V/Li-Ion -with: charger and case -Dimensions: 640/300/H160 mm -Weight: 4.7 kg

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario Screw Feeder UNIQUICK Feeder Type 360 Plastic sorting bowl, diameter 360 mm Quiet and surface-friendly conveying Optimal screw dimensioning depending on the material being conveyed (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance thanks to amplitude control In a sound-insulated housing on a frame Track width: 20 mm Connector head diameter up to 20 mm Connector length up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Belt Hopper Bucket, chute: stainless steel Belt: white with FDA approval Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a controlled, quiet, and gentle feed of screws and fasteners. UNIQUICK Multi Modularly expandable 3-way diverter Distributes the tested screws to three stationary screwdriving devices Separation Adapted discharge rail Precise guidance at the head Modular design Few format-dependent parts Component reproducibility Sensor monitoring Maintenance-free Sound insulation Screw conveying in a plastic bowl Lined with sound-insulating material Airtight blow-in of screws Compressed air maintenance unit Compressed air connection: 6 bar Cedswbr N Hepfx Afwerc Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor Csdeibichopfx Afworc - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Csdpfx Aeihiiijfwerc Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Crodpfxou Img So Afwec Drawer 1 Ratchet and socket sets 1/4", 3/8", and 1/2", including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4", 3/8", and 1/2". Drawer 3 Open-end/ratchet wrench set (approx. 8–22 mm), double box-end wrench set, and torque wrench. Drawer 4 Precision, slotted, Phillips, and Torx screwdrivers in various sizes, including soft-grip versions. Drawer 5 T-handle hex/Allen key set with ball end and T-handle Torx set (T10–T40). Drawer 6 Pliers and hand tool set: circlip pliers (internal/external), combination and needle-nose pliers, side cutters, pipe wrench, claw hammer, and center punch set.

Condition: new, Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers Crsdpfsd Ih Huex Afwjc and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155 Warra...

Condition: excellent (used), mileage: 104,242 km, first registration: 04/2018, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise - Speed limiter - LED lights - Air suspension - Air horn - Particulate filter - Radio/cassette player - Reversing camera - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Centralized lubrication - Towing jaw = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Unladen weight: 23,000 kg Axle configuration Front axle: Steering Rear axle 1: Twin wheels Rear axle 2: Twin wheels Rear axle 3: Lift axle; steering Functional Body manufacturer: RSP ESE 6 RD 8000 Condition Technical condition: very good Visual condition: very good Financial Information Price: On request MERCEDES-BENZ AROCS 3251 8X4 TRIDEM RSP ESE 6 RD 8000 SUCTION EXCAVATOR EURO 6 L PACKAGE 510 HP Crsdpfx Asuxvc Dofwoc DRIVE 8X4 TRIDEM LAST AXLE LIFTABLE AND STEERABLE WHEELBASE 390 CM AIR SUSPENSION AROCS CAB WITH AIR CONDITIONING, NAVIGATION, CAMERA DIFFERENTIAL LOCK AUTOMATIC TRANSMISSION TRAILER COUPLING RSP SUCTION EXCAVATOR TYPE: ESE 6 RD 8000 TWIN TURBINES!!! HYDROSTATIC DRIVE WITH REMOTE CONTROL POWER BOOM WITH ROTARY HEAD TANK 8M3 WATER TANK 200L CENTRAL LUBRICATION 2X RADIO REMOTE CONTROL EXTRA HIGH-PRESSURE PUMPING UNIT WITH HOSES AND PISTOL EXTRA AIR OUTLETS AT THE REAR OF THE TRUCK FOR OPERATING AIR TOOLS SUCH AS A HAMMER COMPRESSOR 2,588 HOURS FAN 336 HOURS ALL AVAILABLE MANUALS AND SERVICE BOOKS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: ready for operation (used), Stöger 9278 screwdriving automation SN: SES003743 with 2 x Kistler Z90002.15 sensors SN: 5078913 + 5078912, used, in good condition, 100% fully functional, scope of delivery as per photos. Cedpfjx Eu Sxex Afwerc