Used Cefla Easy 2000 for sale (12,714)

Condition: new, Load Weight Shelf 30000 kg Lredpfxofgyhbs Abyou Loading weight per level 3000 kg Number of load levels 2 x 5 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW Lredpfofgyicjx Abysu weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, 15000 kg height 790 - 1350 mm width 2000 mm ja Lsdpol Sva Dsfx Abyeru 120 x 2000 mm

Condition: new, Lifting capacity 2000 Kg Ljdpfx Ajvblgmebyeru Magnetic field 350 x 150 mm weight 70 Kg

Condition: excellent (used), Welding positioner, 2-ton load capacity Ljdpfx Aegytclebyjru with hand and foot remote control Speed and inclination continuously adjustable good condition, machine is robust and durable Height when tilted up to the center: 1.05 meters Height in horizontal position: 1.3 meters Diameter: 1.3 meters Length: 2.2 meters Width: 1.4 meters Speed: from 0.01 revolutions per minute to approximately 1.0 revolution per minute.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm Ljdpfxogp Dyms Abyeru The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 2000 kg load capacity Rotating device, self-supporting, with brake for fixture construction, toolmaking for assembly, welding, painting, etc. with foot-operated remote control switchable left/right Machine is in technically new condition, almost unused Dimensions: Height to center of axle 850 mm Ledehwv Rvjpfx Abysru More machines of this design in various sizes are in stock. Load capacity from 500 kg to 5000 kg.

Year of construction: 2001, condition: good (used), Heavy-duty scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale, vehicle scale, drive-through scale -Manufacturer: OAS, Heavy-duty scale, floor scale, pallet scale, bar steel scale Lodpfsz D T Abjx Abyoru -Type: SWT -Weighing range: up to max. 1500 kg -Platform: 2000 x 1500 mm -Transport dimensions: 2000/1500/H360 mm -Empty weight: 310 kg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, input voltage: 220 V, total length: 1,000 mm, total width: 1,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, overall weight: 150 kg, type of cooling: air, Equipment: documentation/manual, balloon printing machine with a capacity of approximately 1,250 pieces per hour, capable of printing on one or two sides in a single color; the machine is ready for immediate use and can be collected in Dronten, the Netherlands. Ledpfxjz E Imke Abyoru

Condition: used, Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Thickness: 400 mm Height on feet: 910 mm Class 2 Weight: approx 2 T Lrsdez H Ixispfx Abyju

Condition: good (used), Cast iron marbles Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Lrsdoz H Ixvepfx Abyeu Delivered with 6 levelling feet Weight: 7 T 2 same plates available.

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Lredpfx Abjz H I Anjyju Total height: 4000 mm Unit weight: approx 6 T

Condition: used, functionality: fully functional, machine/vehicle number: 2199, mileage: 629,947 km, power: 368 kW (500.34 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 7,390 kg, overall weight: 18,000 kg, tire size: 315/80/22.5, tire condition: 70 %, axle configuration: 4x2, wheelbase: 3,650 mm, fuel: diesel, fuel tank capacity: 400 l, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, Year of construction: 2001, Equipment: ABS, AdBlue, additional headlights, air conditioning, car registration, cruise control, differential lock, electric window regulation, fog lights, hydraulics, low noise, non-smoking vehicle, onboard computer, power assisted steering, power mirror, retarder, seat heater, soot filter, tachograph, F 2000 19.414, leaf spring suspension at the front, air suspension at the rear, ZF manual gearbox (synchronizer rings for 3rd and 7th gear worn), tilting hydraulics, AP rear axle, tires: 2 x 80%, 4 x 70%, German vehicle, first owner. Ledoz Nlq Aspfx Abyeru For sale only to commercial businesses and with the exclusion of any warranty. We deliver to any German seaport.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA08, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) Ledpsz Ipdcjfx Abysru F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: Lrjdjz Iprtepfx Abyeu FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in perfect working order and operates without any issues. It can be tested upon request. Ledsz Iiifspfx Abyoru

Condition: used, TORNOS DECO 2000/13 is a CNC automatic lathe engineered for precision machining, high accuracy and dependable reliability. Key capacities: 10 axes; max workpiece length 180 mm; internal spindle diameter 13 mm; spindle speeds 100-12000 t/min; back spindle 100-8000 t/min. Main specs: 50 Hz 3x400 V supply; spindle motor 2.2 kW; total power 11 kVA; weight approx. 2550 kg; footprint L2000×W1260×H1950 mm. Equipment: bar feeder IEMCA GENIUS 226/32, chip conveyor, coolant system, oil mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Lrodpfx Aoz Dvztsbyeu

Condition: used, Year of construction: 2006, turning diameter 540 mm turning length 1020 mm control FANUC 18 i-TB bar diameter 65 mm travel -x axis 555 / 185 mm travel -y axis 160 mm travel -z axis 1095 mm travel -z axis (sub spindle) 1065 mm spindle speed: 5000 / 5000 1/min spindle bore 76 / 76 mm C-Axis 360 x 0,001°/360 x 0,001° turret head BMT 65P / 12 Pos. milling spindle turning speeds 10000 U/min Driven Tools 4.000 U/min b-axis 240 ° rapid traverse X-axis 24 m/min rapid traverse Z-axis 24 m/min drive capacity - spindle motor 22 / 22 kW Lrsdpfjz Ezrmex Abyou voltage 400 V toolpiece magazine: chain magazine 40 Pos. tool taper HSK-A 63 milling drive 15 kW driven Tools 5,5 kW total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,30 x 2,30 x 2,90 m

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR240-2 2000 Industrial Robot, including control cabinet 57250 The KUKA KR 240-2 robot is a 6-axis robot arm with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications for the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications: Manufacturer: KUKA Model: KR 240-2 2000 Type: Robot arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Control cabinet: 57250 Year of manufacture: 02/2008 Used item – normal signs of wear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Ljdpfjz Ru D Usx Abyoru Freight costs on request – please specify delivery address.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240 L210-2 2000 Industrial Robot, including control cabinet 56178 The KUKA KR 240 L210-2 robot is a 6-axis robot arm with a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications for the KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications: Manufacturer: KUKA Model: KR 240 L210-2 2000 Type: Robot arm Axes: 6 Payload: 210 kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Control cabinet: 56178 Year of manufacture: 01/2008 Used – shows normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected on site. Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Lrsdez Ru Hcopfx Abyeu Shipping or freight costs vary depending on quantity, weight and desired delivery conditions. Shipping costs to foreign countries available upon request – please provide country, city and postal code. Freight costs available upon request – please provide delivery address.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, KUKA KR150L110-2 robot, 2000 Number of axes: 6 Max. payload: 110 kg Max. reach: approx. 3100 mm Year of manufacture: 8/2009 Scope of supply: Robot, controller, cables, teach pendant Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Lodoz Rt I Sopfx Abyeru Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: excellent (used), Year of construction: 1999, CHAIN FILTER Maximum filter capacity : 30.000 m3/h ATEX Approved 4 x Dust extraction Fans, 15 Kw each. ( All 4 frequenz controlled ) Filter measures : L 6700 x W 2400 x H 4200 mm ( Without legs : H 3300 mm, will fit on a low truck in 1 section ) Cross air unit included Lrsdpfez R Eh Dox Abyju Filter + fans has always been located inside, so the condition is very good.

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Lrjdpfx Aoz Sqmzebyou Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Stand throat depth: 200 mm

Condition: used, functionality: fully functional, mileage: 87,500 km, power: 162 kW (220.26 HP), first registration: 05/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of seats: 9, Year of construction: 1998, Equipment: additional headlights, The LHF 16 fire engine was in service at a major airport. The condition is good and it is ready for operation. Lrodpfxjy S Thfj Abyju The equipment shown in the photos belongs to the vehicle and will be included. Water tank: 1230 liters Foam tank: 130 liters

Condition: ready for operation (used), A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible. Ledpoyttw Iofx Abyeru