Used Carton Divider Inserter 10.000 Bph for sale (3,773)

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum filling Bottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage productio.. Podsy Szcwepfx Ahlopt

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements includin... Podpfxjy Szb Ho Ahlspt

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Pjdjxk T Igspfx Ahlopt

Condition: excellent (used), For sale: Professional milling head from the renowned brand JEB ToolTechnic Zerspanungswerkzeuge. Model: S2138.063.R06IK Cutting diameter: Ø63 mm Mounting: SK40 Number of insert seats: 6 Condition: used, in very good technical condition, equipped with cutting inserts – ready for use. This head is ideal for machining steel and cast iron in both roughing and finishing operations. Proven in production, ensures high performance and precision milling. Pjdpfjxk T N Rjx Ahljpt

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Ppodpfoxllcljx Ahljt

Condition: excellent (used), Professional measuring instrument with two sliding spindles terminated with cones. Enables precise positioning of a component for checking runout, straightness, or concentricity. Specification (approximate): Working length between centers: about 300 mm Base length: about 380 mm Spindles with sliding and locking capability High-precision industrial construction Universal application for measurement or workshop use Condition: Very good technical and visual condition The instrument is ready for operation Ppsdpsw Rkqtefx Ahljt

Condition: used, Model: Divider 660+ Year of manufacture: 2018 Condition: Used Serial number: 660002.21888.133706 Stock number: 3346J / 3347J Cutting speed: max. 2640 rpm Treif / Wipotec checkweigher belt width: 345 mm Cut thickness: 0.5 - 25 mm Treif / Wipotec checkweigher weighing platform: 400 mm Stacking height: up to 100 mm Treif / Wipotec checkweigher dimensions: 400 x 1100 x 1050 mm Product dimensions: max. 280 x 160 mm Treif cross sorter belt width: 420 mm Product length: max. 850 mm Treif cross sorter dimensions: 700 x 1050 x 1050 mm Belt width: 385 mm Treif sorting conveyor belt width: 420 mm Treif sorting conveyor dimensions: 2300 x 1150 x 1250 mm Compressed air: min. 6 bar Power supply: 3 x 400 V, 50 Hz, 7.5 kW Treif sorting conveyor type: HS-380 Dimensions: 1900 x 1050 x 2150 mm Treif sorting conveyor serial number: 243003.61973.105787 Weight: 850 kg Treif sorting conveyor year of manufacture: 2009 Treif sorting conveyor dimensions: 500 x 900 x 1650 mm Treif sorting conveyor weight: 90 kg Variovac thermoforming machine type: Optimus Variovac thermoforming machine serial number: 420.OL0707 Variovac thermoforming machine year of manufacture: 2018 Variovac thermoforming machine film: rigid film Variovac thermoforming machine film width: 420 mm Variovac thermoforming machine index: 280 mm Variovac thermoforming machine mold: 2 pieces of 232 x 175 mm Variovac thermoforming machine vacuum pump: Busch, RA0100F Variovac thermoforming machine compressed air: min. 6 bar Ppodsyz Sc Tjpfx Ahlet Variovac thermoforming machine power: 3 x 400 V, 50 Hz, 15 kW Variovac thermoforming machine dimensions: 4200 x 1100 x 1850 mm

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, power: 1.9 kW (2.58 HP), year of last overhaul: 2026, SVC-N 150 EP Compact • Weight range 250 g - 1600 g, double piece 500 g - 3200 g • EP computer control, 50 programs, swiveling • Infinitely variable speed via frequency converter • Motor-driven weight adjustment • 600 - 2500 pcs/h • Flour duster • Stainless steel housing • 80 kg hopper with safety grid, laterally swiveling with automatic shut-off function • Mobile • Measuring chamber/drum made of stainless steel (acid-resistant), Teflon piston • Newly painted and completely overhauled (2026) • Optional at additional cost: tipping device (stainless steel version) €950.00 + VAT Pjdpfx Ahsy N S Huolept All prices are subject to VAT and ex works Syke. Available at short notice (shipping possible at buyer’s expense) Advance payment required upon order We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical modifications, and errors. The photos are sample images of the model.

Year of construction: 2019, condition: like new (used), 2 Quantity Antares Vision Matrix Stations - Top View Standalone module for off-line semi-automatic carton/bottle-to-case or bundle-to-case aggregation The Matrix Station Top View is a standalone aggregation module for off-line manual packaging operations. It is designed to allow Pharma Industries to establish a reliable and consistent hierarchical relationship “parent-child” throughout the composition of packaging from lower level to higher one, such as folding box/bottle to case or bundle to case. The operator inserts the individual packaging into the shipping carton layer by layer. Each completed level is photographed from above by a high resolution auto-focus camera through an automatic trigger. Dedicated software monitors the progress and when the number of units and layers is reached, a label is generated. The Matrix Top View is also able to handle higher aggregation levels, boxes on pallets. Aggregation station designed to maximize productivity in the manual packaging operations. Pedpeyb Tw Rofx Ahlopt Performs multiple reading from the top of the Datamatrix codes on cartons or bottles when fit into a case, managed as units or as aggregated bundles. The vision head is equipped with camera system and integrated LED lighting to read each layer of cartons during case composition. AUTOMATIC FOCUS ADJUSTMENT FOR EACH CASE LAYER READING MULTIPLE READING WINDOW (mm): 600×420 ERGONOMIC DESIGN OPTION: TRANSPORTABLE ON WHEELS

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet Pjdpfx Ahoybtnvslopt - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: used, functionality: fully functional, grinding length: 1,000 mm, grinding width: 300 mm, Surface grinder BPH 300/1000. Ppsdoy Uz D Hepfx Ahlot

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)Products handled: cider, sparkling water, still water, juices with CO2Filling technology: Ultra-clean, isobaric, volumetric PET fillingCurrent product: Apple juice with water and CO2Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neckControls: Siemens Simatic S7 PLC platformMain Equipment ScopeCIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/hProcess: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanksPreforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unitCaps: Cassner cap feeding with cap rinsing and sterilizationBlow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor)Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaningCoding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspectorConveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak testerLabeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glueSecondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicatorPack coding: Leisinger Jet 3 ink coderPalletizing: Krones Robopox Modulpal (2016)Advanced Automation & Control Systems Line Control & PLCSiemens Simatic S7-series PLC for coordinated line control, interlocks and diagnosticsIntegrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cyclesRecipe and parameter management supporting fast changeovers between PET formats Ppsdpfoyhbmtox Ahljt

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition Pedpoy E T Dgsfx Ahlept

Condition: excellent (used), CNC Flexible LINE for Drilling, Routing and Dowels Inserting With BECKHOFF numerical control (Windows-based software) Panel length: Min 260 mm / Max 2500 mm Panel width: Min 96 mm(*) / Max 1200 mm Panel thickness: Min 13 mm / Max 25 mm (*) Panel width: min. 120 mm on the 3rd BAT for dowels inserting A) HEDGEHOG Loader with in-feed transverse roller conveyor B) 1st FLEXIBLE CNC Mod. BAT-DTW, through-feed system - 2 drilling heads with 21 spindles each (2 x 2.2 kW) - 1 groove-cutting saw (2.2 kW) - 2 groove-cutting saws for the rear panel (2 x 0.37 kW) - 2 drilling heads with 12 spindles each (2 x 2.2 kW) - 1 horizontal groove milling unit (4.4 kW) C) 2nd FLEXIBLE CNC Mod. BAT-DTW, through-feed system - 4 drilling heads with 9 spindles each (4 x 1.6 kW) - 2 drilling heads with 3 horizontal spindles each (2 x 1.6 kW) - 1 milling unit (4.4 kW) - 2 drilling heads with 5 spindles each (2 x 1.6 kW) D) 3rd FLEXIBLE CNC Mod. BAT-DTW, through-feed system - 1 Horizontal glue application unit (pump and air-operated glue dispenser with 13 nozzles) Ppedpey N Ucfofx Ahlot - 1 Dowel insertion unit - 1 milling unit with 8-position changer (5 clamps) (4.4 kW) - 1 drilling head with 12 individually adjustable double spindles (1.6 kW)

Year of construction: 2021, condition: new, Soco Case Sealer, Model T10 Standard Product Specifications • Capacity 30 units/min Ppedpogq Nx Uofx Ahlet • Galvanised steel body construction • 50mm high grip side drive belts • Tape width range 32mm 55mm • Top & Bottom tape heads • Manual side drive adjustments • Manual height adjustments • Three phase power supply • Machine dimensions 1170mm L x 740mm W • 50mm tape overlap on box We supply a full range of Soco Equipment and spare parts

Condition: excellent (used), Soco System Carton / Case Sealer With top and bottom tape heads Podpohlp E Aofx Ahlspt Model: T-100 380 V, 3 Ph Plastic roller belt, roller width: (2x) 300 mm Total dimensions: 1540 mm x 800 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, total width: 620 mm, total length: 670 mm, total height: 1,460 mm, input frequency: 50 Hz, input voltage: 400 V, power: 1 kW (1.36 HP), type of input current: three-phase, DGUV certified until: 05/2028, NEW NEW Bun Divider Rounder NEW NEW Semi-automatic dough dividing and rounding machine, Daub Model: 4-09 NEW Proven technology ... the original! User-friendly, easy cleaning position! Supplied with 3 rounding plates Dough ring with Teflon coating, featuring "easy click" Portion range: 100 to 440 grams/piece 9-division cutting with stainless steel blades Mobile machine (on wheels) Only with us: DGUV V3 safety inspected Connection: 400V, 16A-CEE plug NEW machine & SAB certified With warranty + spare parts service Optional: - Leasing & rental service - Additional rounding plates Pedpfsu Rzi Tox Ahlept - Maintenance contract - Service package - Delivery service - Training & commissioning You will find the best selection of bun divider rounders only here with us!

Condition: new, -Dimensions (LxWxH): 500x840x540 mm -Dough capacity: 50/280 kg -Dough portions: from 30 to 300 g -Voltage: 400 V -Power: 0.93 kW -Weight: 74 kg -Compact design, easy to use and clean. -Machine complies with CE standards. -Portioning of dough from 30 to 300 grams. -Portioning error: +/- 5 g from desired weight. -Operates by dough extrusion using a spiral tool. -Equipped with two adjustment systems: sensor and cone. -Entire machine built from stainless steel and aluminum for robustness and easy cleaning. -All parts in contact with the product are removable via handy handwheels and are easily washable without requiring maintenance. Podpfx Aexvxhiehlopt -The outfeed hopper is easily removable for replacement of reduction sleeves. -All components are compliant with hygiene and safety standards. -Regular cleaning requires no special maintenance.

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 7,500 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2009Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000 Pjdpfx Asy Rrirehlopt

Condition: used, Year of construction: 2024, machine/vehicle number: M333, Used SIG Combibloc Filling Line – 26,500 BPHTechnical Specifications & Performance Data This SIG Filling Combibloc HMR - 7478 is engineered for high-efficiency aseptic filling in small-format packaging. Manufactured in 2024, it combines reliability with precise dosing for demanding beverage production environments. Designed within the SIG-2 Combibloc ecosystem, it integrates advanced sterilization and high-speed handling to support continuous industrial packaging operations on a used bottling line or second-hand installation. Line Volume Speed Equipment Description Year of Manufacture SIG-B HMR - 7478 65ML, 125ML, 200ML 26500 H2O2 Supply System, Concentration Check 2024 Pedpfoy Rriljx Ahlspt Filling Machine CFA 1224 & Accessories 2024 CONVERSION KIT FOR FILLER SPEED UP 2025 Manufacturer: SIGModel: HMR - 7478Rated Speed: 26,500 BPHFill Volumes: 65 ml, 125 ml, 200 mlSterilization: H2O2 system (SIG COMBI 2024)System Compatibility: SIG-2 Combibloc 1224 filler platformUpgrades: Filler speed-up conversion kit (SIG-2 2025)Formats: Compatible with 0.065L, 0.125L, 0.2L package sizesAdvanced Automation & Control Systems The Combibloc leverages SIG engineering for controlled aseptic operation. The H2O2 sterilization module, updated in 2024, enables reliable decontamination of packaging pathways, while synchronized drives and servo-controlled movements maintain accuracy at high throughput. Operator interfaces, including a modern HMI touchscreen, are designed for intuitive changeovers and monitoring, supporting stable runtime in industrial packaging applications. Integrated safety logic and interlocked stainless steel guards protect operators and ensure hygienic operation during beverage production.Production Line Integration Capabilities Built for seamless line integration, the Combibloc interfaces with upstream and downstream equipment across SIG-2 Combibloc systems and compatible packaging machinery. It is currently a running line located at the Khurda Plant. It supports inline operation with conveyors, accumulation, and downstream secondary packaging. Quick format change principles accommodate small-size ranges from 65 ml to 200 ml, enabling fast product switches and efficient SKU management in complex used bottling line layouts.Machine Condition & Maintenance History Configured as a high-tier solution suitable for immediate integration, the unit is aligned with SIG-2 Combibloc filler standards and includes the available H2O2 system upgrade. A speed-up conversion kit (2025) is installed for enhanced capacity. This filling Combibloc presents as a professional-grade asset, available for sale after June 2026, for facilit...

Condition: reconditioned (used), functionality: fully functional, Bread Roll Divider Fortuna Automat A 3 H + Process deactivation for product variety! Rear head cleaning Dividing head newly redesigned With NEW stainless steel blade For consistently high quality Robust engineering Ppedoy Ebi Rspfx Ahlst Connection: 400V, 16A CEE plug Dimensions: 720 x 800 x 1510 mm Refurbished used machine Quality from a specialized company! Benefit from over 35 years of experience! Visit our large showroom!

Condition: used, total height: 2,150 mm, total length: 3,200 mm, total width: 1,900 mm, Empty weight: 3.500 kg - Documentation available: No - CE certificate present: No - Serial number: 179997 Podpox A Tudjfx Ahlept - Drive system: Conventional - Power [kW]: 4.0 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 500 - Table width [mm]: 1100 - Table depth [mm]: 350 - Magnet width [mm]: 1000 - Magnet depth [mm]: 300 - Max. grinding wheel diameter [mm]: 300 - Control: Conventional - Motor power: 4.0kW - Transport dimensions: 3200mm x 1900mm x 2150mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, 6 station swingarm machine, overhaul 2026 completely new PLC machine control (no pitney bowes control) Operation via color touch panel electronic gripper controls, Program can be extended at any time and adapted to customer requirements, various reading systems can be integrated Psdpedyk Sdefx Ahlspt Roller ejection with programmable divert bin Warranty 1 year

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Podpfjwml S Ejx Ahlept Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Pjdsyxm Hzepfx Ahlopt Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour