Used Boma Column Drilling Machine/Boma Sb 32 V for sale (88,223)

Condition: good (used), functionality: fully functional, rotational speed (max.): 1,400 rpm, rotational speed (min.): 32 rpm, throat depth: 355 mm, overall weight: 1,700 kg, drilling capacity: 50 mm, For sale: 1 used pillar drilling machine Manufacturer: WMW Saalfeld Type: BK50 AI Drilling capacity in steel: 50mm Thrust: 355mm Spindle mount: MK5 Speed: 32 - 1,400 rpm Table size: 770 x 640mm Gbsdpfxevytw Dj Ahmsr Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: ready for operation (used), GILLARDON GB 20 – Column Drilling Machine from University Gbsdpfoyk Dl Rox Ahmsr - Infinitely variable speed control - Equipped with MK 3 adapter - Maximum drilling capacity in steel: 30 mm - Throat: 285 mm - Quill travel: 150 mm - Table clamping surface: 400x400 mm - Table height adjustment approx. 650 mm - Adjustable drill depth stop - Speed display - Emergency stop - Work lamp - Foot switch - Documentation Dimensions (LxWxH): 0.7x0.6x1.8 meters / Weight: 650 kg Subject to errors and input mistakes

Condition: good (used), Manufacturer: Bulgaria Year of manufacture: 1979 Machine number: 8499 Type / Model: PK 203 Drilling capacity in steel: 25 / 30 mm Spindle taper: MK 3 Gsdpey E Hahofx Ahmebr Speeds: 95 to 2,000 rpm Feed: 0.08 to 0.32 mm/rev Throat: 280 mm Table: 410 x 440 mm Clamping surface: 320 x 345 mm Footprint: 510 x 760 mm Stroke: 160 mm Total connected load: 1.1 kW Accessories/Equipment: Condition: good Weight: 0.5 t Dimensions: 550 x 1,000 x 1,900 mm

Condition: excellent (used), functionality: fully functional, 4-speed gearbox speeds from 180 to 2000 rpm motor power 0.75 kW drilling depth stop up/down adjustment vice available at extra cost Gbjdpfxjyxcu Io Ahmjr

Condition: used, Year of construction: 1975, Make: Oradea Infratirea Gjdpfx Ahernrpvsmebr Type: G 16 Machine number: 4966 Year of construction: 1975 Drilling capacity: 30 mm Spindle holder: MK 3 Speed range: 150 to 2,360 rpm Feed rate: yes (defective) Table: 490 x 390 mm Clamping surface: 400 x 300 mm throat depth: 285 mm Quill stroke: 160 mm Headstock adjustment: 200 mm Table adjustment: 350 mm Footprint: 500 x 830 mm Connection: 1.65 kW Equipment: Thread cutting device Condition: good, feed defective Weight: 0.7 t Dimensions: 500 x 830 x 2,100 mm

Condition: new, Year of construction: 2022, Power: 1.1 kW Drilling capacity in steel / Continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed settings: 9 Spindle mount: MK-4 Drilling stroke: 120 mm Spindle overhang: 254 mm Gsdpfjgulr Hjx Ahmsbr Table size: 475 mm x 425 mm Tilting / rotating of the drilling table: 45° to the left / 360° Column diameter: 80 mm Quick-change drill chuck: 1 - 16 mm Weight: 132 kg

Condition: as good as new (ex-display), Year of construction: 2025, Power: 0.85, 1.5 kW Speed range: 300 - 4000 rpm Speed settings: stepless Spindle mount: MK-3 Godpfohpmbbex Ahmjbr Drilling stroke: approx. 105 mm Spindle overhang: 200 mm Weight: 152 kg

Condition: good (used), Stock number: 3046 Manufacturer: WMW Saalfeld Machine number: 2118/64 Type / Model: BS 16AII Spindle stroke: 140 mm Spindle mount: MT3 Gbodpsxgh T Nsfx Ahmsr Drilling capacity: 30 mm Speed range: 180 to 2,000 rpm Throat depth: 280 mm Table: 570 x 470 mm Clamping surface: 450 x 350 mm Head height adjustment: 200 mm Footprint: 450 x 780 mm Total connected load: 2.3 kW Accessories / Equipment: separate control cabinet; reversible spindle (right/left rotation); thread cutting device Condition: good Weight: 0.65 t Machine dimensions: 850 x 570 x 2,100 mm Control cabinet dimensions: 600 x 400 x 1,250 mm

Condition: good (used), Machine number: 26798 Type / Model: BS 40 AIII Drilling capacity in steel / cast iron: 50 / 60 mm Spindle mount: MK 5 Spindle speeds: 32 to 1,400 rpm Feed rate: 0.11 to 1.73 mm/rev Table: 780 x 650 mm Clamping area: 630 x 500 mm Head height adjustment: 250 mm Stroke: 280 mm Footprint: 700 x 1,200 mm Total power consumption: 6.7 kW Accessories/Equipment: Thread cutting function, right-hand/left-hand rotation; automatic feed, separate control cabinet Condition: good Weight: 1.5 t Gjdpfx Aoiypmxjhmebr Dimensions: 780 x 1,200 x 2,700 mm

Condition: good (used), Stock number: 3075 Manufacturer: Alzmetall Machine number: 11495 Type / Model: AB3 ES Quill stroke: 180 mm Spindle taper: MK3 Drilling capacity: 30 mm Speed range: 160 to 1,420 rpm, stepless Throat: 280 mm Table diameter: 450 mm Godsyifmwepfx Ahmobr Clamping surface diameter: 360 mm Table height adjustment: – mm Column diameter: 110 mm Footprint: 450 x 650 mm Total connected load: 2 kW Accessories/Equipment: Condition: good Weight: 0.3 t Machine dimensions: 600 x 900 x 1,850 mm

Condition: new, COLUMN DRILLING MACHINE UNIMAX 3 Comparable to Alzmetall, Flott, etc. Powerful, precise column drilling machine with a wide range of applications. Drill table adjustable via rack and pinion and worm gear, and swiveling around the column. Forward/reverse switch, emergency stop button, digital speed display Infinitely variable spindle speeds Range A: 80 - 1440 rpm Range B: 180 - 3200 rpm Continuous drilling capacity: 25 mm Nominal drilling capacity: 30 mm Thread cutting capacity: M20 Spindle: MK 3 Gbsdpfxewkhlio Ahmjr Drilling depth: 125 mm Throat depth: 260 mm Spindle/table distance: 90 to 840 mm Table surface: 500 x 365 mm Overall height: 1855 mm Weight: 250 kg Incl. drilling package, consisting of: 1 drill chuck arbor MK3 / B16 2 reducing sleeves MK3 / 2, MK3 / 1 1 machine vice MSP 140 1 keyless drill chuck 1 - 16 mm / B16

Condition: excellent (used), For sale is an as-new Teknatool Nova Voyager DVR pillar drill equipped with a powerful 2 HP direct-drive motor. The machine is in excellent condition and has been reconditioned and inspected by our qualified staff. (Fully operational) Technical specifications: - Pillar drill with DVR drive - Speed range: 50 - 3,000 (5,500) rpm - Forward/reverse operation - Variable speed control - Height: 1,794 mm, Width: 448 mm, Depth: 578 mm - Spindle travel: 152 mm - Table size: 419 x 419 mm - Motor: 2 HP (230 Volt) - Keyed drill chuck 3 - 16 mm The machine is located at A-8561 Söding and can be inspected and collected during our business hours at any time. Subject to prior sale! Related terms: column drill, bench drill, drill press Reference: DT58003 Gbsdpfx Asxzf H Aehmor SHIPPING NOT POSSIBLE!!!

Condition: excellent (used), 0.75 kW motor Drilling depth 9 cm Gbsdpfx Aeul U E Ajhmjr Maximum material height 40 cm

Condition: excellent (used), Drilling capacity in steel (diameter): 23 mm Gbedpjuzacgefx Ahmor

Condition: excellent (used), Column drilling machine GILLARDON GSB 20 Gsdpfx Ahsmu Almomsbr

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. Gsdpfxjyy Rn Sj Ahmsbr * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Gjdpfx Ajy Uiyvehmebr Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, Column Drill Gillardon Type GSB 32 V Machine No.: Year of manufacture approx. 1975 Drilling capacity: 32 mm Taper: MK 4 – long quill Throat: 350 mm Quill travel: 170 mm Table size: 570 x 470 mm Column diameter: 140 mm Spindle speed Motor speed step 1, Belt step 1: 50 – 300 rpm, stepless Spindle speed Motor speed step 2, Belt step 1: 100 – 600 rpm, stepless Godoyhf Izepfx Ahmsbr Spindle speed Motor speed step 1, Belt step 2: 100 – 500 rpm, stepless Spindle speed Motor speed step 2, Belt step 2: 150 – 1000 rpm, stepless Motor power: 1 / 1.5 kW Power supply: 380 Volt, 50 Hz - automatic feed approx. 0.1 / 0.16 / 0.25 mm/rev, 3 steps - spindle speed via 2 motor speeds, 2 V-belt stages and variator gearbox - adjustable drilling depth stop - table height adjustment via rack and hand crank - tiltable drilling table with angle scale - drill chuck RÖHM Ø 1 to 13 mm - machine lamp Required space (L x W x H): 1000 x 750 x 2000 mm Weight: 470 kg Good condition

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling diameter in steel ST 60: 32 mm - Drill spindle mount: MK 3 - Right/left rotation - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev Gedpjdkx Anjfx Ahmsbr - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm - Weight, approx.: 420 kg - Includes: - Coolant system - Quick-change drill chuck 1-13 - Lighting

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DR63M6/BR/TH geared motor with a three-phase motor and a 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of use and minor scratches on the housing. Technical specifications: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply voltage: 3×230/400 V Δ/Y Gedezn Ngaepfx Ahmsbr Frequency: 50 Hz Current: 1.00 / 0.57 A Motor speed: 900 rpm Output speed: 15 rpm Torque: 32 Nm Gear ratio: i = 60.00 Ingress protection: IP54 Insulation class: F Brake: 24 V DC Weight: 9.46 kg

Condition: excellent (used), For sale: Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the pictures. Thanks to its compact design and worm gear, the geared motor is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Godpjznclcofx Ahmjbr Motor speed: 1370 rpm Output speed: 133 rpm Torque: 22.6 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the pictures.

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Electromagnetic brake: 24 V DC Protection class: IP54 Insulation class: F Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg Gsdpjznaq Nofx Ahmjbr

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. Gbodpskahu Refx Ahmsr

Condition: used, Professional vacuum machine Webomatic C 50-W is designed for vacuum packaging and hermetic sealing of food products in butcher shops, restaurants, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require high working capacity, reliable performance and extended product shelf life in daily professional use. The vacuum system removes air from the packaging, preserving freshness, quality, aroma and product structure. The machine is suitable for packaging meat, cured meat products, cheese, fish, ready meals and many other food items. Model C 50-W is equipped with a powerful Busch vacuum pump with 100 m3/h capacity, ensuring fast and efficient operation even with larger packaging volumes. The chamber size of 700 x 460 mm provides enough space for different product types and package sizes. Sealing bars sized 1 x 450 mm and 1 x 695 mm allow flexible packaging of different bag sizes and products. Stainless steel construction ensures long service life, high hygiene standards and easy maintenance. Stable industrial design makes this model an excellent choice for professional use. Technical specifications: Machine type: Vacuum machine Manufacturer: Webomatic Model: C 50-W Power supply: 400 V / 3 Ph / 50 Hz Power: 2.2 kW Current: 5.4 A Vacuum pump: Busch RA 0100 E 541 Pump capacity: 100 m3/h Chamber size: 700 x 460 mm Sealing bar dimensions: 1 x 450 mm / 1 x 695 mm Overall dimensions: 830 x 660 x 1000 mm Material: Stainless steel Gbsdpfx Ahjy Iz S Rsmor Application: Vacuum packaging and sealing Use: Butcher shops, restaurants, food processing, professional kitchens Operation: Fast, efficient and reliable Maintenance: Easy and simple

Condition: good (used), Year of construction: 2010, spindle speed (min.): 1,500 rpm, travel distance Z-axis: 650 mm, Model Year: 2010 Chuck Diameter: 17" Number of Axes: 2 Length: 650mm Spindle Bore Diameter: 650mm Spindle Speed (RPM): 1500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek Gbjdpsx N A A Tefx Ahmjr