Used Biesse Selco Wn2 for sale (416)

Condition: used, functionality: unexamined, Ferwood Code: RU0008936 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Dedpfxjv Hp D Ts Aa Hscl

Condition: used, functionality: unexamined, Ferwood Code: RU0008937 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Dcjdpsv Hp Hnjfx Aa Hel

Condition: used, functionality: unexamined, Ferwood Code: RU0008949 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Dcjdpfsv Hp Nisx Aa Hsl

Condition: used, functionality: unexamined, Ferwood Code: RU0008955 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Dcedev Hp S Dopfx Aa Hol

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Dedeyq Avhspfx Aa Hscl Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Dcjdpfx Aasxt Sgtj Hsl

Condition: used, Year of construction: 2005, 2005 BIESSE ROVER B 4.40 FT 3-axis CNC machining center Dcedpfxjy Ud Sgj Aa Hsl Technical features in the last photo Engine hours on: 45,343 Machine hours in automatic operation (work): 27,267

Condition: used, mileage: 47,291 km, power: 110 kW (149.56 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 09/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle Number (for inquiries): 157 MERCEDES-BENZ SPRINTER 215 HIGH ROOF + LONG Paint Code: Dcodpjzrrfaefx Aa Hol * 9775 Paint color Iridium Silver MB 9775 Interior: * Fabric, black Equipment: * 9775 Paint color Iridium Silver MB 9775 * BH1 Hold function * BH8 Control code, hydro-aggregate variant 7 * BK2 Control code, wheel brake configuration 2 * C6L Multifunction steering wheel * C910 - * CL1 Steering wheel adjustable in inclination and height * D03 High roof * D50 Fixed partition * E07 Hill start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * ES0 Jump start contact * ES5 Charging package, instrument panel * EW6 Pre-wiring for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown assistance * F64 Exterior mirrors, electrically foldable * F68 Exterior mirrors, heated and electrically adjustable * F910 - * FG8 Cupholder, front * FJ4 Storage compartment under cockpit * FKA Panel van * FY7 Multi-button remote control * FZ9 Two main keys in addition * GK8 9G-TRONIC * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IF0 Model series C910 VS30, front-wheel drive * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic market (Germany) * IL5 Left-hand drive * IL6 Metallic paint * IS3 Wheelbase 3924 mm (code for determining body dimensions) * IT3 3.0-tonne * J0V Pre-installation for blind spot assist system * J10 Speedometer km/h * J55 Seat belt warning system for front passenger seat * J58 Seat belt warning system for driver's seat * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI6 Service interval start mileage 40,000 km * K12 Main fuel tank 65 liters * KP7 Exhaust gas purification SCR Generation 4 * L Left-hand drive * L94 Omission of parking lights * LA2 Headlamp assist * LB5 3rd brake light * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * M72 Vehicle suitable for HVO fuel * MJ8 ECO start/stop function * MT6 Emission class Euro 6D N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * P2M Parking assist package * Q11 Longitudinal member reinforcement * RN5 Tires 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel manufacturer Maxion Wheels * S02 Driver's seat * S22 Armrest for driver's seat, ISO-fix (child seat mounting system) * S23 Passenger seat, single seat * SA5 Airbag, driver * SK2 Seat occupancy recognition, driver's seat * T16 Sliding door, right * T77 Grab handle at the entrance of the cargo area sliding door on the partition * T86 Grab handle on the rear right corner pillar * V94 Cable duct on the side wall * V95 Cable duct on the rear portal * VA3 Interior lining of cargo area up to roof height, washable * VF7 Fabric Maturin, black * VK8 Floor covering, plastic * WB9 Control code, factory * WM2 Control code, factory * WM3 Control code, factory * WM9 Control code, factory * WN2 Control code, factory * WZ7 Control code, factory * X30 Vehicle registration certificate part 2 * X3G Weight variant 3,000 kg * X99 Manufacturer Mercedes-Benz AG * XC9 Certificate of Conformity (COC) papers * XI2 Model year G2-I * XM1 Noise reduction measure * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signage/printed material, German * XV0 Control code - BZM test *

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 40 kW (54.38 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 30 m/min, Equipment: CE marking, documentation/manual, Biesse STREAM B MDS 2.0/15.0 Djdpfx Aoyu S Iuja Hjcl

Condition: used, Year of construction: 2009, Used BIESSE ARTECH edge bander, model Akron 430 A T Technical data: - Minimum/maximum panel length: 140-3200 mm - Minimum/maximum panel width: 85-3200 mm - Minimum/maximum panel thickness: 10-60 mm - Minimum/maximum edge thickness (rolls): 0.4-3 mm - Minimum/maximum edge thickness (strips): 0.4-8 mm - Minimum/maximum edge height: 14-64 mm - Working height: 900 mm - Panel protrusion from feed track: 25 mm - Feed track speed: 12 m/min - Dust extraction air speed: 30 m/sec - Supply air pressure: 7-10 bar SINTRA LT control Entry guide with mechanical viewer -Trimming unit: 2 motors, 1.8 kW each, with pad followers Vertical adjustment for tool position -Gluing unit: glue pot capacity 2 kg 3 air-operated pressure rollers Digital edge thickness viewer -Shear unit with 2 push pressure positions depending on edge thickness -Automatic strip edge loader -End trimming unit: 2 motors, 0.50 kW each, with pad followers, 2 selectable cutting angles (0°-15°) automatically adjustable from control panel (to increase edge overhang or trim for best finishing) -Multifunction corner rounding unit with 4 selectable positions from control panel Possible operations: straight, bevel, radius1, radius2 For each finishing position, +/- edge overhang can be selected -Edge scraper unit -Glue scraper unit Program creation for different finishing options Dcsdpeyt Nvgofx Aa Hol Machine length: 3880 mm Weight: 1530 kg

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 94464, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, controller model: XNC Numerical Control, TECHNICAL DETAILS Working Area X-Axis: 3,400 mm Working Area Y-Axis: 1,300 mm Working Area Z-Axis: 155 mm Number of Work Fields: 2 Tool Changer Positions (lateral): 3 Tool Changer Positions (chain): 20 Drilling Head Configuration: 10 vertical drills X-axis 12 vertical drills Y-axis 6 horizontal drills X-axis 2 horizontal drills Y-axis MACHINE DETAILS Control System: XNC Numerical Control Vertical Spindle Type: C-axis Vector, ISO 30 cone type EQUIPMENT Extraction pump 8 manually adjustable beams for suction cup support with display Dcedpfxjydkkgo Aa Hel 8 pneumatic bakelite rails for panel lifting 3 manually adjustable suction cups per beam Front safety and protection system with mats Comprehensive safety fencing Motorized mat for chip removal

Condition: used, maximum load weight: 37,840 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2018, next inspection (TÜV): 09/2028, Year of construction: 2018, Equipment: ABS, Internal vehicle number: G400099 Available immediately at our location in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Extendable Unladen weight: 5,450 kg Dedoyx N R Ajpfx Aa Hecl Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Dcsdpfx Aew Rpd Soa Hjl Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Working area X: 6,400 mm Working area Y: 1,500 mm Number of milling spindles: 1 Main motor: 13 kW Maximum rotation speed: 24,000 rpm Tool clamping system: HSK-F63 Tool change positions: 8 Vertical drilling heads: 20 Horizontal drilling units X: 4 Horizontal drilling units Y: 4 2 vacuum pumps, each 360 m³/h Nesting Remote control Dodpjwlcqvefx Aa Hecl Software: BIESSE WORKS Overall dimensions: 11,004 × 5,334 mm Weight: 4,900 kg

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP Dcjdoy Rqh Tspfx Aa Hol 230 Volt Gas-cooled 2/4 Step Pulse Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Dedpfx Aaozqc U Ao Hocl OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, mileage: 46,393 km, power: 110 kW (149.56 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 12/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 121 MERCEDES-BENZ SPRINTER 215 HIGH + LONG Paint code: * 9775 Paint color Iridium Silver MB 9775 Interior: * Fabric, black Equipment: * 9775 Paint color Iridium Silver MB 9775 Dcsdozwbd Aspfx Aa Hol * BH1 Hold function * BH8 Control code for hydraulic unit variant 7 * BK2 Control code for wheel brake configuration 2 * C6L Multifunction steering wheel * C910 - * CL1 Steering wheel adjustable in inclination and height * D03 High roof * D50 Continuous partition * E07 Hill start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Fleece battery 12 V 92 Ah * ES0 Jump start contact * ES5 Charging package, instrument panel * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F64 Exterior mirrors, electrically folding * F68 Exterior mirrors, heated and electrically adjustable * F910 - * FG8 Cup holders, front * FJ4 Storage compartment under cockpit * FKA Box van * FY7 Multi-button remote control * FZ9 Two main keys in addition * GK8 9G-TRONIC * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IF0 Model series C910 VS30, front-wheel drive * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic market (Germany) * IL5 Left-hand drive * IL6 Metallic paint * IS3 Wheelbase 3924 mm (BM coding) * IT3 3.0-ton vehicle * J0V Pre-installation for blind spot assist * J10 Speedometer, km/h * J55 Seatbelt warning system for passenger seat * J58 Seatbelt warning system for driver seat * J65 Outside temperature display * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI6 Start-up mileage, maintenance interval 40,000 km * K12 Main tank, 65 liters * KP7 Exhaust gas purification, SCR generation 4 * L Left-hand drive * L94 Omission of parking lights * LA2 Headlamp Assist * LB5 3rd brake light * LE1 Adaptive brake lights * LX5 Europe * M40 Generator 14V/200A * M72 Vehicle compatible with HVO fuel * MJ8 ECO start/stop function * MT6 Emission class Euro 6D N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * P2M Parking Assist package * Q11 Longitudinal member reinforcement * RN5 Tires 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel manufacturer Maxion Wheels * S02 Driver's seat * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S23 Passenger seat, double seat * SA5 Airbag, driver * SK2 Seat occupancy recognition, driver's seat * T16 Sliding door, right * T77 Grab handle at entrance of load compartment sliding door on partition * T86 Grab handle on rear corner pillar, right * V94 Cable duct on side wall * V95 Cable duct on rear portal * VA3 Interior paneling of load compartment up to roof height, washable * VF7 Fabric Maturin, black * VK8 Floor covering, plastic * WB9 Control code, plant * WM2 Control code, plant * WM3 Control code, plant * WM9 Control code, plant * WN2 Control code, plant * WZ7 Control code, plant * X30 Registration certificate part 2 * X3G Weight variant 3,000 kg * X99 Manufacturer Mercedes-Benz AG * XC9 Certificate of Conformity (COC) documents * XI2 Model year G2-I * XM1 Noise reduction measure * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signage/printed materials, German * XV0 Control code - BZM testing *

Condition: new, Set of 2 MATS FOR CHIP REMOVAL AT THE OUTLET OF A BIESSE MACHINING CENTER: - 1 Flat mat, 600 x 2100 mm, Dcedpfx Aaozc Rc Hs Hel - 1 Inclined mat, 700 mm, with a retaining edge to contain chips up to a height of 1650 mm.

Condition: good (used), Electronic self-centering through-feed clamping device NC400 control unit Adjustable dimensions: Length: from a minimum of 250 mm to a maximum of 2500 mm Dcsdpfx Aaezfpulo Hol Width (depth): from 180 mm to 780 mm Minimum height: 300 mm, maximum height: 1300 mm

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 6,452 h, input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, number of axes: 4, Equipment: CE marking, documentation/manual, Biesse Rover C6 — CNC apstrādes centrs Pod & Rail, 2008. gads Biesse Rover C sērijas CNC apstrādes centrs ar pod & rail darba galdu. Frēzēšana, urbšana un profilēšana — paneļi un masīvkoks. Iekārta pilnībā funkcionāla. Apskate un demonstrējums zem sprieguma pēc Dcjdpfx Aszvy U Dsa Hsl iepriekšēja pieraksta Kalnciemā, Latvijā. Detalizēta tehniskā specifikācija — precīzs modeļa apzīmējums, darba zona, vārpstas jauda, asu skaits, instrumentu magazīna un darba stundas — pieejama pēc pieprasījuma vai apskatē uz vietas. Cena EXW Kalnciems. Palīdzam ar demontāžu un iekraušanu.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 51989, functionality: fully functional, operating hours: 300 h, We offer a BIESSE Rover C6 65 machining center, manufactured in 2009, in very good condition. Manufacturer: BIESSE Model: Rover C6 65 Year of Manufacture: 2009 Condition: very good X-axis travel: 6450 mm Y-axis travel: 1935 mm Djdpszu U Susfx Aa Hscl Z-axis travel: 350 mm If you have any questions or need further information, please feel free to send us a message.

Condition: used, mileage: 43,358 km, power: 110 kW (149.56 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,000 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 156 MERCEDES-BENZ SPRINTER 315 HIGH ROOF + LONG Paint code: * 9775 Paint color Iridium silver MB 9775 Interior: * Fabric, black Equipment: * 212L Berlin * 9775 Paint color Iridium silver MB 9775 * BH1 Hold function * BH8 Control code, hydraulic aggregate variant 7 * BK2 Control code, wheel brake configuration 2 * C6L Multifunction steering wheel * C910 - * 1 / 7 * SA codes * CL1 Steering wheel adjustable in inclination and height * D03 High roof * D50 Fixed partition * E07 Hill start assist * E1D Digital radio (DAB) * E3M MBUX multimedia system with 7-inch touchscreen * ED4 Gel battery 12 V 92 Ah * ES0 Jump start contact * ES5 Charging package, instrument panel * EW6 Pre-equipment for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F64 Exterior mirrors, electrically foldable * F68 Exterior mirrors, heated and electrically adjustable * F910 - * FG8 Cup holder, front * FJ4 Storage compartment under cockpit * FKA Box van * FY7 Multi-button remote control * FZ9 Two main keys additional * GK8 9G-TRONIC * HH9 Semi-automatic climate control system Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IF0 Model series C910 VS30 FWD * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IL6 Metallic paint * IS3 Wheelbase 3924 mm (BM-defining code) * IT3 3.0-tonner * J0V Pre-equipment for blind spot assist * J10 Speedometer km/h * J55 Seat belt warning system for co-driver seat * J58 Seat belt warning system for driver's seat * J65 Outside temperature indicator * JA8 Crosswind assist * JB7 Parking package with reversing camera * JH3 Communication module (LTE) for digital services * JI6 Start-up distance, maintenance interval 40,000 km * K12 Main tank 65 liters * KP7 Exhaust gas purification SCR Generation 4 * L Left-hand drive * L94 Omission of parking lights * LA2 Driving light assistant * LB5 3rd brake light * LE1 Adaptive brake light * LX5 Europe * M40 Generator 14V/200A * M72 Vehicle capable of running on HVO * MJ8 ECO start-stop function * MT6 Emission class Euro 6D N1 * MU3 Engine OM654 DE 20 LA 110 kW (150 hp) * P2M Parking assist package * Q11 Longitudinal member reinforcement * RF1 Tire manufacturer Continental (10) * RM0 All-season tires * RN5 Tires 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel manufacturer Maxion Wheels * S02 Driver's seat * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S23 Co-driver seat, two-seater * SA5 Airbag, driver * SK2 Seat occupancy detection, driver's seat * T16 Sliding door, right * T77 Grab handle, entrance to cargo area sliding door at partition * T86 Grab handle on rear corner pillar, right * V94 Cable duct on side wall * V95 Cable duct on rear portal * VA3 Interior lining, cargo area up to roof height, washable * VF7 Fabric Maturin, black * VK8 Floor covering, plastic * WB9 Control code, factory * WM2 Control code, factory * WM3 Control code, factory * WM9 Control code, factory * WN2 Control code, factory * WZ7 Control code, factory * X30 Certificate of registration, part 2 * X3G Weight variant 3,000 kg * X99 Manufacturer Mercedes-Benz AG Dcodpfx Aozn Etpsa Hsl * XC9 COC documents * XI2 Model year G2-I * XM1 Noise reduction measure * XO9 Mercedes

Condition: excellent (used), EDGE BANDING and CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Flexa 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Flexa 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Flexa 912: mm 100 /1350 (o 650+650) 238000A) “DOUCET” motorised roller conveyor for feeding panels to the “HOMAG” edge-bander 238000B) “HOMAG” edge-banding machine, Model KL 73/A3/S2 238000C) “DOUCET” motorised roller conveyor for feeding edged panels to “MORBIDELLI” Flexa 912 238000D) “MAHROS” 90° transfer unit (infeeding “MORBIDELLI” Flexa 912) 238000E) "MORBIDELLI" Gantry (Portal) CNC (Drilling and Routering) Mod. Flexa 912 - N. 2 upper working head, EACH consisting of: - 1 type T35M drilling head with 35 vertical spindles (21 on the Y-axis + 14 on the X-axis) - 1 (movable) drilling head with 14 vertical spindles (on the Y-axis) for fittings - 2 heads with 2 horizontal spindles each (4 total) on the Y-axis Dedpfxjzza Rvo Aa Hocl - 1 HKS 63 vertical electric spindle (6.6 kW) - N.2 horizontal units (1 R + 1 L) EACH with 21 drilling spindle (21 + 21 = total 42) 238000F) “MAHROS” 90° transfer unit (outfeeding “MORBIDELLI” Flexa 912) 238000G) "RBO (BIESSE)" Stacker (Bridge Frame), double station Mod. Selecta SC

Condition: excellent (used), Year of construction: 2008, I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2008. Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per side: Milling head 3,5 kW, 7000-18000 rpm 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Version with outfeed table. Dcedpfeq Diw Ajx Aa Hol Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Year of construction: 2001, condition: ready for operation (used), Biesse Rover 22 CNC machining centre Year of manufacture 2001 SN 07498 Working range 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vacuum cup holders 4 pneumatic bakelite bars for lifting the platen Dcjdpfx Aeggxihja Hsl Vertical electrospindle 7,5 kW with automatic tool change, ISO 30 taper Automatic tool change 7 positions on the working head Drilling head with 20 spindles arranged as follows: 7 vertical in X-axis 7 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Grooving saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical specifications subject to change