Used Baumann Dx50/14/40 for sale (28,652)

Condition: excellent (used), Climats Type: EXCAL 1413-HA Air-cooled climate control cabinet EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD memory, Windows 7 and 2 USB ports. This means it is state-of-the-art. Technical data: Test room dimensions: width 550 mm x depth 500 mm x height 500 mm Housing dimensions: width 820 mm x depth 1375 mm x height 1730 mm Window 350 x 380 Volume: 138 liters Flow-through installed in basic equipment R1: 80 mm ∅ L1: 80 mm ∅ Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.8 K Temperature change rate Heating 15 K/min Cooling 10 K/min Data for climate tests: Temperature range + 10 to +90 °C Humidity range 10 to 98 %r.h. Data for operation: 3/N/Ph+T 400V±10% 50 Hz Rated power 9.8 KVA Refrigerant R-404A / R-23 Weight: 430 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) Iodpfov Dt T Tex Aa Ijau We are happy to answer any further questions you may have over the phone.

Condition: used, Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley Isdpfopul U Asx Aa Isau -Timing belt pulley: Ø 190 mm -Type: 40-14M-55 -Pitch: 14 mm / strap width approx. 55 mm -Receptacle: Taper clamping bushing: Tecnamic 2517-40 Ø 40 x 45 mm -Dimensions: Ø 190 x 70 mm -Weight: 8.7 kg

Condition: good (used), Pneumatic cylinder, air cylinder, standard cylinder Iaodpfx Aasd Rz Dwo Iou -Stroke: 1400 mm -Piston rod: Ø 15 mm -Recording piston rod: M12 x 1.5 mm -Pressure: max. 12 bar -Dimensions: 1570/50/H50 mm -Weight: 8.1 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 400 mm -Type: C1-40/25x400 TGL 10906 Iaodpov Sz Hwjfx Aa Ieu -Piston rod: Ø 25 mm -Dimensions: 545/100/H70 mm -Weight: 5.8 kg

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces Iaodpfxjgxnkke Aa Iju -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Condition: used, Power converter, power supply, power pack, switching power pack -Manufacturer: Siemens, SITOP Power 40 power supply Iasdpfemch Umox Aa Isu -Type: 6EP1437-3BA00 -Input: 3AC 400-500V/max.2.6A 50/60Hz -Output: 24VDC/40A/960W -Dimensions: 130/240/H120 mm -Weight: 3.4 kg

Condition: used, Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 255 mm -Type: 56-14M-85 -56 teeth: belt width approx. 85 mm -Receptacle: Taper clamping bushing: optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 255 x 100 mm -Weight: 24.5 kg Iajdpopul Uxofx Aa Iou

Condition: good (used), Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder Iedjpk Iqhjpfx Aa Ioau -Quick-change turning tool holder: 16 B 1 -Shooting dimensions: see photos -Clamping height: 40 mm -Support length: 200 mm -Quantity: 2x holders available -Price per piece -Dimensions: 200/65/H150 mm -Weight: 3.6 kg/piece

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm Iaedpfxsv Szwvo Aa Isu -Type: S1-40/25x250 /OW TGL 10906 -Piston rod: Ø 25 mm / M16 -Hole diameter: 100 x 11 mm -Number: 5x cylinders available -Price: per piece -Dimensions: 400/95/H95 mm / 400/95/H110 mm -Weight: 5.3 kg/piece

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: PCM, tapping collet -Type: ET1-40 -Size: Ø12 mm -Dimensions: Ø40 x 52 mm Iasdpfxswzhgnj Aa Iou -Weight: 0.3 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders Iedpev S U Dcofx Aa Ioau -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 200 mm -Type: B1-40/18x200 /O TGL 10906 -Piston rod: Ø 18 mm / M16 -Hole diameter: 100 x 11 mm -Number: 1x cylinder available -Dimensions: 350/95/H95 mm -Weight: 4.2 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 40 mm -Type: B1-32/14x40 TGL10906 -Piston rod: Ø 14 mm / M12 Iaodpjv N D Dyofx Aa Iju -Holes: Ø 20 mm -Dimensions: Ø 50 x 204 mm -Weight: 1.6 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Iaodpfshubc Njx Aa Ieu -Clamping table: Milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 14 mm, slot spacing 50 mm -Rotatable. Manually operated with 6 mounting screws. -tiltable and swiveling: via cranks -Fits Deckel Mikron WMW and other milling machines -Overall dimensions: 700/600/H345 mm -Weight: 198 kg

Condition: good (used), thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: PCM, tapping pliers 4 pieces Iaodpfjvv Ufbox Aa Isu -Type: ET1-40 -Size: 1x Ø9 mm / 2x Ø10 mm / 1x Ø12 mm -Delivery/Price: complete -Transport dimensions: 80/80/H52 mm -Weight: 1.2 kg

Condition: good (used), adjustable gearbox, variable speed gearbox, spindle adjustment gearbox, extruder gearbox, PIV gearbox -Manufacturer: PIV, adjustable gearbox type RZO without drive -Adjustment range: R-9 -Chain: Rb 1 40 -Technical data: see photo type plate Iaedpfxetxklmo Aa Iju -Shaft diameter: 18 x 30 mm -Total dimensions: 290/220/H320 mm -Weight: 31 kg

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Desch, timing belt pulley Ø 255 mm - Pitch: 14 mm / Belt width 55 mm Ijdopid Dgepfx Aa Ieau -Receipt: Ø 40 x 50 mm taper bushing Desch 3020-40 -Dimensions: Ø 255 x 70 mm -Weight: 16.3 kg

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low pressure radial fan -Manufacturer: Dietz, low-pressure radial fan type DN 14 -Motor: Dietz 0.45 kW 2880 rpm -Volume flow: 19 m³/min -Connection: inlet Ø 130 mm -Connection: Output 110 x 110 mm -Protection class: IP56 -Dimensions: 380/300/H295 mm Iajdpfeuncwxsx Aa Iou -Weight: 15.4 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders Iaedpfxogxnkce Aa Isu -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Condition: used, Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail -Stop: shaft Ø 16 mm Ijdpfx Aaogkw R Aj Isau -Takes: square 12 x 12 mm/M10 x 1,5 -Dimensions: Ø 14 x 2405 mm -Weight: 2,7 kg

Condition: new, empty load weight: 370 kg, maximum load weight: 1,030 kg, overall weight: 1,400 kg, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 150 mm, loading space volume: 0.8 m³, color: silver, construction height: 780 mm, working width: 2,050 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, lowerable loading area / 1400 kg axle / Including 100km/h, * IMMEDIATELY AVAILABLE * incl. lowerable loading area / 1400 kg axle / Including 100km/h Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1400 kg - Unladen weight: 370 kg - Payload: 1,030 kg - Interior dimensions: 260 x 155 x 15 cm (L x W x H) - Overall exterior dimensions: 403 x 205 x 78 cm (LxWxH) - Loading sill height: 46 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Multiplex wooden floor 18mm - Side walls: Steel profile powder-coated black - Side wall height: 15cm - Chassis: Low loader lowerable, ALKO rubber spring axle - Tipping function: lowerable - Hydraulics: Hand pump - Drive-on angle: approx. 6 - Wheel stopper: without - Overrun device & brake: ALKO - Frame/chassis: Welded hot-dip galvanized steel frame - Lashing eyes: 8 pieces foldable - Winch: at extra charge - Supports: Supported by rear. - Ramps: with rear drive-over point - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - 3-sided body made of sturdy galvanized steel profile and powder-coated in black-grey (RAL 7021) - Continuous drive-on wedge enables drive-on across the entire width of the loading area - Wheel shock absorber + 100 km/h approval - Insertion options at all corners for e.g. tarpaulin frame - Folding number plate Foldable license plate holder - Sturdy plastic mudguards - 8 fold-down lashing eyes in the side wall profile - 1 lashing eye in the bulkhead profile - 1 lashing ring in the middle of the rear loading area - Reinforced, automatic support wheel for safe parking of the loaded trailer - Made of multi-glued screen printing plate, 18 mm, continuous without joints, slip-resistant and waterproof - Drive-on angle in tilted state approx. 6 - Hand pump with hydraulic lowering device and lowering lock - Rear license plate holder, can be swiveled away for loading - Automatic reverse drive - 13-pin plug - Reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - anti-theft device - spare wheel - storage box - high tarpaulin - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Iaodou Hrwgspfx Aa Iou

Condition: new, empty load weight: 995 kg, maximum load weight: 2,005 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,750 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,560 mm, working width: 2,290 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3417-30-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): 340 x 175 x 190 cm - Exterior dimensions (LxWxH): 542 x 229 x 256 cm - Loading height of floor: 59 cm - Perm. Gross vehicle weight: 3,000 kg - Unladen weight: 995 kg - Payload: 2.005 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/65R14 - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum regulation of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing lights Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iedpfou Hrviex Aa Ioau

Condition: excellent (used), Quick-release nut for balancing machine, clamping nut -Manufacturer: Haweka, quick-release nut for balancing machine -Item No.: 143 403 003 Iodpfox Nnx Hex Aa Ieau -Suitable for: Haweka ProGrip clamping devices with 40 x 3 mm shaft -Quantity: 2x quick-release nuts included -Price: per piece -Dimensions: 290/92/H80 mm -Weight: 0.7 kg/pc.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm with top plate Iasdpfx Aaov N Ubcs Ieu -Type: 1-40/28x250/0 TGL10906 -Piston rod: Ø 25 mm -Recordings: mm -Dimensions: Ø 255 x 465 mm -Weight: 9.3 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X386V00612, Year of construction: 2019, operating hours: 13,018 h, load capacity: 1,400 kg, lifting height: 3,145 mm, free lift: 1,519 mm, DGUV certified until: 02/2027, fork length: 1,200 mm, Equipment: UVV, Service + UVV until 02/2027 LI-ION Lithium 1,400kg Duplex Free lift Electric Forklift Truck No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 3,145 mm Overall height: 2,150 mm Fork length: 1,200 mm Free lift: 1,519 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Dimensions (L x W): 3,000 x 1,100 mm Weight: 3,200 kg Isdpoyzfzpofx Aa Ioau Battery: 10/01/2019 48V 268Ah, very good performance – measured at 52.3V Operating hours: 13,018 h EQUIPMENT • Former Linde full-service unit • Service valid until 02/2027 • UVV valid until 02/2027 • Facelift model with tilt angle display (very useful when handling sensitive goods) • Duplex mast with full free lift • 3rd hydraulic valve • Side shifter • Load backrest (can be easily removed) • Lateral fall protection (can be easily removed) • LED work light front • LED work light rear • Safety light rear • Comfort seat All dimensions are approximate. Errors in specifications and measurements are excepted. COLLECTION CONDITIONS Side loading up to 5 tons possible on-site with a large forklift at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday 7:00–16:30. If the mast is too high for transport, it can be dismantled on request. In case of non-collection within the specified period, a storage fee of €20 per machine per day will be charged (payment must be made prior to collection).

Condition: new, Type MJ1412-40 Feed speed (inverter) 9-35 m/min. Spindle diameter 70 mm Diameter of sawblades 355-405 mm Cutting width 400 mm Cutting height 100/115 mm Isdpeitvfpsfx Aa Ijau Min. cutting length 290/480 mm Motor power 37 kW Total power 42,1 kW Transport dimensions 3000x1300x1500 mm Weight 2000 kg Price 22450 Eur (EXW Jonava, Lithuania)